Gebou wag en sy afhanklikhede in rpm. Installeer wag vanaf rpm, basiese opstelling

Beskrywing

Sentry - 'n instrument om uitsonderings en foute in u toepassings te monitor.

Belangrikste kenmerke:

• maklik geïntegreer in die projek,
• vang foute in beide die gebruiker se blaaier en op jou bediener.
• Vry,
• Die lys van foute word intyds opgedateer,
• As die fout as opgelos gemerk is en weer verskyn, word dit weer geskep en in 'n aparte draad in ag geneem,
• Foute word gegroepeer en vertoon in volgorde van frekwensie van voorkoms,
• Foute kan gefiltreer word volgens status, logbron, logvlak, bedienernaam, ens.

Vergelyking met ELK-logs: Die belangrikste ding is dat in ELK, elke nuwe log van dieselfde tipe 'n aparte inskrywing is. en in skildwag is elke nuwe uitsondering van dieselfde tipe net + 1 tot die telling van sy rekord

Sentry ondersteun die meeste programmeertale. Meer besonderhede hier.

Begin Sentry met docker en docker-compose

Jy kan Sentry laat loop met docker en docker-compose soos hier beskryf: https://github.com/getsentry/onpremise. Maar die skrip loods bykomende dienste op dieselfde bediener in enkelmodus (sonder fouttoleransie) (Vir weergawe sentry 10.0.0):

• data
• postgres
• herhaal
• dieretuinopsigter
• Kafka
• klikhuis
• simboliseerder

As jy foutverdraagsaamheid nodig het, sal jy óf die wolkprodukplanne moet gebruik óf Sentry sonder hierdie skrif moet installeer.

Hierdie pos beskryf die proses om Sentry en sy afhanklikhede in 'n rpm te bou. As jy Sentry moet installeer waar daar geen internet is nie, kan jy 'n yum-bewaarplek maak vanaf die ontvangde rpms.

Belangrike verduideliking oor die samestelling en installering van pakkette

Sommige pakkette is afhanklik van mekaar. Daarom word die montering en installasieproses in verskeie fases verdeel.

TODO:

Hierdie pos dek die bou en installering van Sentry weergawe 9.1.2. Nadat die ontwikkelaars 'n paar klein vrystellings vrygestel het, kan jy die Sentry 10.XY-weergawe bou. Baie van die nuutste commits in master is regstellings.

Bedienervereistes vir die bou van rpm

Hoe meer SVE's daar is, hoe vinniger sal die semafoor en simboliese pakkette gebou word

Skakel Selinux af

Die gemeenskap sal slegs ten gunste wees as iemand selinux-beleide vir Sentry skryf.

sudo sed -i s/^SELINUX=.*$/SELINUX=disabled/ /etc/selinux/config
sudo reboot

Koppel die epel-vrystelling-bewaarplek

sudo yum install -y epel-release git

Ons versamel afhanklikhede in rpm pip en installeer dit. Lêer 1general_dependencies.sh

echo "Install dependencies"
sudo yum install -y cargo gcc gcc-c++ libffi-devel libjpeg-devel libxml2-devel 
libxslt libxslt-devel make mc openssl-devel python-devel memcached 
python-lxml python-nose python2-pip python34 rpm-build rpmdevtools 
ruby-devel rubygems zlib-devel redis xmlsec1-openssl xmlsec1 
libtool-ltdl-devel xmlsec1-devel xmlsec1-openssl-devel openldap-devel

echo "Build common pip dependencies to rpm by fpm"
gem install --no-document fpm
echo "For chardet==3.0.2 need setuptools>=12"
echo "For cryptography==2.8 need setuptools>=18.5"
fpm -s python -t rpm setuptools==18.5
sudo yum install -y python-setuptools-18.5-1.noarch.rpm
fpm -s python -t rpm --name python2-pip pip==20.0.2
sudo yum install -y python2-pip-20.0.2-1.noarch.rpm

Installeer en hardloop PostgreSQL 9.6 om python-psycopg2-binary te bou. Lêer 2psycopg2-binary.sh

U kan die PostgreSQL-weergawe in die skrif verander.

sudo yum install -y postgresql-devel
fpm -s python -t rpm psycopg2-binary==2.7.7
sudo yum install -y python-psycopg2-binary-2.7.7-1.x86_64.rpm
sudo yum remove -y postgresql-devel postgresql postgresql-libs

Stel en installeer python-dateutil rpm. Lêer 3dateutil.sh

#!/bin/bash

echo "Build and install python-dateutil rpm"
mkdir -p ~/rpmbuild/{BUILD,RPMS,SOURCES,SRPMS,SPECS}
spectool -g -R spec/python-dateutil.spec
wget https://raw.githubusercontent.com/patsevanton/sentry-rpm/master/spec/python-dateutil-system-zoneinfo.patch -P ~/rpmbuild/SOURCES
wget https://raw.githubusercontent.com/patsevanton/sentry-rpm/master/spec/python-dateutil-timelex-string.patch -P ~/rpmbuild/SOURCES
rpmbuild --bb spec/python-dateutil.spec
sudo yum install -y ~/rpmbuild/RPMS/noarch/python-dateutil-2.4.2-1.el7.noarch.rpm

Stel en installeer python-urllib3 rpm. Lêer 4urllib3.sh

spoiler titel

echo "Build pip dependencies to rpm by fpm for urllib3"
fpm -s python -t rpm pycparser==2.19
sudo yum install -y python-pycparser-2.19-1.noarch.rpm
fpm -s python -t rpm cffi==1.14.0
sudo yum install -y python-cffi-1.14.0-1.x86_64.rpm
fpm -s python -t rpm cryptography==2.8
sudo yum install -y python-cryptography-2.8-1.x86_64.rpm
fpm -s python -t rpm idna==2.7
sudo yum install -y python-idna-2.7-1.noarch.rpm
sudo chmod +r /usr/lib/python2.7/site-packages/idna-2.7-py2.7.egg-info/PKG-INFO
fpm -s python -t rpm pyOpenSSL==19.1.0
sudo yum install -y python-pyopenssl-19.1.0-1.noarch.rpm
fpm -s python -t rpm pbr==5.4.4
sudo yum install -y python-pbr-5.4.4-1.noarch.rpm
fpm -s python -t rpm mock==2.0.0
sudo yum install -y python-mock-2.0.0-1.noarch.rpm
fpm -s python -t rpm py==1.8.1
sudo yum install -y python-py-1.8.1-1.noarch.rpm
fpm -s python -t rpm six==1.10.0
sudo yum install -y python-six-1.10.0-1.noarch.rpm
fpm -s python -t rpm pluggy==0.6.0
sudo yum install -y python-pluggy-0.6.0-1.noarch.rpm
fpm -s python -t rpm attrs==19.3.0
sudo yum install -y python-attrs-19.3.0-1.noarch.rpm
fpm -s python -t rpm more-itertools==5.0.0
sudo yum install -y python-more-itertools-5.0.0-1.noarch.rpm
fpm -s python -t rpm pytest==3.5.1
sudo yum install -y python-pytest-3.5.1-1.noarch.rpm

echo "Build urllib rpm"
spectool -g -R spec/urllib3-1.24.2.spec
sudo yum-builddep -y spec/urllib3-1.24.2.spec
rpmbuild --bb spec/urllib3-1.24.2.spec
sudo yum install -y ~/rpmbuild/RPMS/noarch/python-urllib3-1.24.2-1.el7.noarch.rpm

Ons versamel die oorblywende pypafhanklikhede in rpm en installeer dit. Lêer 5other_dependencies.sh

spoiler titel

echo "Build rpm by fpm"
fpm -s python -t rpm jmespath==0.9.5
sudo yum install -y python-jmespath-0.9.5-1.noarch.rpm
fpm -s python -t rpm amqp==1.4.9
sudo yum install -y python-amqp-1.4.9-1.noarch.rpm
fpm -s python -t rpm anyjson==0.3.3
sudo yum install -y python-anyjson-0.3.3-1.noarch.rpm
fpm -s python -t rpm billiard==3.3.0.23
sudo yum install -y python-billiard-3.3.0.23-1.x86_64.rpm
fpm -s python -t rpm docutils==0.16
sudo yum install -y python-docutils-0.16-1.noarch.rpm
fpm -s python -t rpm Pillow==4.2.1
sudo yum install -y python-pillow-4.2.1-1.x86_64.rpm
fpm -s python -t rpm botocore==1.5.70
sudo yum install -y python-botocore-1.5.70-1.noarch.rpm
fpm -s python -t rpm boto3==1.4.5
sudo yum install -y python-boto3-1.4.5-1.noarch.rpm
fpm -s python -t rpm chardet==3.0.2
sudo yum install -y python-chardet-3.0.2-1.noarch.rpm
fpm -s python -t rpm croniter==0.3.31
sudo yum install -y python-croniter-0.3.31-1.noarch.rpm
fpm -s python -t rpm cssselect==1.1.0
sudo yum install -y python-cssselect-1.1.0-1.noarch.rpm
fpm -s python -t rpm cssutils==0.9.10
sudo yum install -y python-cssutils-0.9.10-1.noarch.rpm
fpm -s python -t rpm django-crispy-forms==1.4.0
sudo yum install -y python-django-crispy-forms-1.4.0-1.noarch.rpm
fpm -s python -t rpm django-jsonfield==0.9.13
sudo yum install -y python-django-jsonfield-0.9.13-1.noarch.rpm
fpm -s python -t rpm django-picklefield==0.3.2
sudo yum install -y python-django-picklefield-0.3.2-1.noarch.rpm
fpm -s python -t rpm django-sudo==2.1.0
sudo yum install -y python-django-sudo-2.1.0-1.noarch.rpm
fpm -s python -t rpm django-templatetag-sugar==1.0
sudo yum install -y python-django-templatetag-sugar-1.0-1.noarch.rpm
fpm -s python -t rpm djangorestframework==2.4.8
sudo yum install -y python-djangorestframework-2.4.8-1.noarch.rpm
fpm -s python -t rpm email-reply-parser==0.2.0
sudo yum install -y python-email_reply_parser-0.2.0-1.noarch.rpm
fpm -s python -t rpm enum34==1.1.9
sudo yum install -y python-enum34-1.1.9-1.noarch.rpm
fpm -s python -t rpm functools32==3.2.3.post2
sudo yum install -y python-functools32-3.2.3_2-1.noarch.rpm
fpm -s python -t rpm futures==3.3.0
sudo yum install -y python-futures-3.3.0-1.noarch.rpm
fpm -s python -t rpm hiredis==0.1.6
sudo yum install -y python-hiredis-0.1.6-1.x86_64.rpm
fpm -s python -t rpm honcho==1.0.1
sudo yum install -y python-honcho-1.0.1-1.noarch.rpm
fpm -s python -t rpm httplib2==0.17.0
sudo yum install -y python-httplib2-0.17.0-1.noarch.rpm
fpm -s python -t rpm jsonschema==2.6.0
sudo yum install -y python-jsonschema-2.6.0-1.noarch.rpm
fpm -s python -t rpm kombu==3.0.35
sudo yum install -y python-kombu-3.0.35-1.noarch.rpm
fpm -s python -t rpm celery==3.1.18
sudo yum install -y python-celery-3.1.18-1.noarch.rpm
fpm -s python -t rpm loremipsum==1.0.5
sudo yum install -y python-loremipsum-1.0.5-1.noarch.rpm
fpm -s python -t rpm lxml==4.5.0
sudo yum install -y python-lxml-4.5.0-1.x86_64.rpm
fpm -s python -t rpm milksnake==0.1.5
sudo yum install -y python-milksnake-0.1.5-1.noarch.rpm
fpm -s python -t rpm mistune==0.8.4
sudo yum install -y python-mistune-0.8.4-1.noarch.rpm
fpm -s python -t rpm mmh3==2.3.1
sudo yum install -y python-mmh3-2.3.1-1.x86_64.rpm
fpm -s python -t rpm exam==0.10.6
sudo yum install -y python-exam-0.10.6-1.noarch.rpm
fpm -s python -t rpm msgpack==0.6.2
sudo yum install -y python-msgpack-0.6.2-1.x86_64.rpm
fpm -s python -t rpm oauth2==1.9.0.post1
sudo yum install -y python-oauth2-1.9.0.post1-1.noarch.rpm
fpm -s python -t rpm oauthlib==3.1.0
sudo yum install -y python-oauthlib-3.1.0-1.noarch.rpm
fpm -s python -t rpm parsimonious==0.8.0
sudo yum install -y python-parsimonious-0.8.0-1.noarch.rpm
fpm -s python -t rpm requests==2.20.1
sudo yum install -y python-requests-2.20.1-1.noarch.rpm
fpm -s python -t rpm petname==2.0
sudo yum install -y python-petname-2.0-1.noarch.rpm
fpm -s python -t rpm python-utils==2.3.0
sudo yum install -y python-utils-2.3.0-1.noarch.rpm
fpm -s python -t rpm progressbar2==3.10.1
sudo yum install -y python-progressbar2-3.10.1-1.noarch.rpm
fpm -s python -t rpm pytest-django==2.9.1
sudo yum install -y python-pytest-django-2.9.1-1.noarch.rpm
fpm -s python -t rpm pytest-html==1.9.0
sudo yum install -y python-pytest-html-1.9.0-1.noarch.rpm
fpm -s python -t rpm python-memcached==1.59
sudo yum install -y python-memcached-1.59-1.noarch.rpm
fpm -s python -t rpm python-openid==2.2.5
sudo yum install -y python-openid-2.2.5-1.noarch.rpm
fpm -s python -t rpm python-u2flib-server==4.0.1
sudo yum install -y python-u2flib-server-4.0.1-1.noarch.rpm
fpm -s python -t rpm qrcode==5.3
sudo yum install -y python-qrcode-5.3-1.noarch.rpm
fpm -s python -t rpm querystring-parser==1.2.4
sudo yum install -y python-querystring_parser-1.2.4-1.noarch.rpm
fpm -s python -t rpm redis==2.10.5
sudo yum install -y python-redis-2.10.5-1.noarch.rpm
fpm -s python -t rpm rb==1.7
sudo yum install -y python-rb-1.7-1.noarch.rpm
fpm -s python -t rpm redis-py-cluster==1.3.4
sudo yum install -y python-redis-py-cluster-1.3.4-1.noarch.rpm
fpm -s python -t rpm requests-oauthlib==0.3.3
sudo yum install -y python-requests-oauthlib-0.3.3-1.noarch.rpm
fpm -s python -t rpm percy==2.0.2
sudo yum install -y python-percy-2.0.2-1.noarch.rpm
fpm -s python -t rpm selenium==3.141.0
sudo yum install -y python-selenium-3.141.0-1.noarch.rpm
fpm -s python -t rpm semaphore==0.4.65
sudo yum install -y python-semaphore-0.4.65-1.x86_64.rpm
fpm -s python -t rpm sentry-sdk==0.14.1
sudo yum install -y python-sentry-sdk-0.14.1-1.noarch.rpm
fpm -s python -t rpm setproctitle==1.1.10
sudo yum install -y python-setproctitle-1.1.10-1.x86_64.rpm
fpm -s python -t rpm simplejson==3.8.2
sudo yum install -y python-simplejson-3.8.2-1.x86_64.rpm
fpm -s python -t rpm sqlparse==0.1.19
sudo yum install -y python-sqlparse-0.1.19-1.noarch.rpm
fpm -s python -t rpm statsd==3.1
sudo yum install -y python-statsd-3.1-1.noarch.rpm
fpm -s python -t rpm strict-rfc3339==0.7
sudo yum install -y python-strict-rfc3339-0.7-1.noarch.rpm
fpm -s python -t rpm structlog==16.1.0
sudo yum install -y python-structlog-16.1.0-1.noarch.rpm
fpm -s python -t rpm symbolic==6.1.4
sudo yum install -y python-symbolic-6.1.4-1.x86_64.rpm
fpm -s python -t rpm toronado==0.0.11
sudo yum install -y python-toronado-0.0.11-1.noarch.rpm
fpm -s python -t rpm ua-parser==0.7.3
sudo yum install -y python-ua-parser-0.7.3-1.noarch.rpm
fpm -s python -t rpm uwsgi==2.0.18
sudo yum install -y python-uwsgi-2.0.18-1.noarch.rpm
fpm -s python -t rpm -n PyYAML pyyaml==3.11
sudo yum install -y PyYAML-3.11-1.x86_64.rpm
fpm -s python -t rpm django-auth-ldap==1.2.17
sudo yum install -y python-django-auth-ldap-1.2.17-1.noarch.rpm

Ons stel in rpm sentry saam en installeer dit. Lêer 6sentry.sh

echo "Install nodejs and yarn"
curl -sL https://rpm.nodesource.com/setup_10.x | sudo bash -
sudo yum install -y nodejs
sudo sed -e '/nodesource-source/,+6d' -i /etc/yum.repos.d/nodesource-el7.repo
curl -sL https://dl.yarnpkg.com/rpm/yarn.repo | sudo tee /etc/yum.repos.d/yarn.repo
sudo yum install -y yarn

cp spec/config.yml spec/sentry.conf.py ~/rpmbuild/SOURCES
cp spec/sentry-cron.service spec/sentry-web.service spec/sentry-worker.service ~/rpmbuild/SOURCES
spectool -g spec/sentry-9.1.2.spec
sudo yum-builddep -y spec/sentry-9.1.2.spec
rpmbuild -bb spec/sentry-9.1.2.spec
sudo yum install -y ~/rpmbuild/RPMS/noarch/python-sentry-9.1.2-1.el7.noarch.rpm

Die installering van sentry rpm met afhanklikhede op 'n ander bediener

Skakel Selinux af

sudo sed -i s/^SELINUX=.*$/SELINUX=disabled/ /etc/selinux/config
#### sudo reboot

Koppel die epel-vrystelling-bewaarplek

sudo yum install -y epel-release git libjpeg-turbo redis
sudo systemctl start redis

Installeer en laat loop PostgreSQL 9.6. Lêer 7postgresql.sh

sudo yum install -y https://download.postgresql.org/pub/repos/yum/reporpms/EL-7-x86_64/pgdg-redhat-repo-latest.noarch.rpm
sudo yum install -y postgresql96 postgresql96-server postgresql96-contrib
sudo /usr/pgsql-9.6/bin/postgresql96-setup initdb
sudo systemctl start postgresql-9.6
sudo -i -u postgres psql -c "create user sentry with password 'password';"
sudo -i -u postgres psql -c "create database sentry with owner sentry;"
sudo -i -u postgres psql -c "alter role sentry superuser;"

# TODO: Проверить без прав superuser для роли sentry
#sudo -i -u postgres psql -c "alter role sentry nosuperuser;"
#sudo -i -u postgres psql -c "CREATE SCHEMA main AUTHORIZATION sentry;"

Ons begin die migrasie (skep 'n databasisskema) en begin die dienste. Lêer 8start_sentry.sh

sudo systemctl start redis
sudo -i -u sentry /usr/bin/sentry --config /etc/sentry/ upgrade
sudo systemctl start sentry-worker
sudo systemctl start sentry-cron
sudo systemctl start sentry-web

Skep 'n interne Sentry-administrateur

https://forum.sentry.io/t/noninteractive-first-time-setup-of-user-via-upgrade/164

sudo -i -u sentry /usr/bin/sentry --config /etc/sentry/ createuser 

Gebou wag in rpm, installasie, konfigurasie vir die lui

Skakel Selinux af

sudo sed -i s/^SELINUX=.*$/SELINUX=disabled/ /etc/selinux/config
sudo reboot

Voer skrifte uit om sentry te bou en te installeer

sudo yum install -y epel-release git
git clone https://github.com/patsevanton/sentry-rpm.git
cd sentry-rpm
./1general_dependencies.sh
./2psycopg2-binary.sh
./3dateutil.sh
./4urllib3.sh
./5other_dependencies.sh
./6sentry.sh
Копируем rpm из rpmbuild/RPMS и корня sentry-rpm на целевой сервер. Создаем yum репо. Устанавливаем все собранные rpm пакеты.
./7postgresql.sh
./8start_sentry.sh

Skep 'n interne Sentry-administrateur

https://forum.sentry.io/t/noninteractive-first-time-setup-of-user-via-upgrade/164

sudo -i -u sentry /usr/bin/sentry --config /etc/sentry/ createuser 

Toets tans uitsondering stuur

Ons sal dit op 'n java-projek toets. Laai java en maven af.

sudo yum install -y java-1.8.0-openjdk-devel git
sudo wget http://repos.fedorapeople.org/repos/dchen/apache-maven/epel-apache-maven.repo -O /etc/yum.repos.d/epel-apache-maven.repo
sudo yum -y install apache-maven
git clone https://github.com/getsentry/examples.git
cd examples/java/basic
mvn compile exec:java

Nou moet ons java begin deur dit SENTRY_DSN deur te gee

SENTRY_DSN=https://public:private@host:port/1 mvn exec:java

Nou moet ons die verstek gegenereerde SENTRY_DSN vind.

Kom ons gaan Sentry toe. Kom ons gaan na die verstekprojek internal.

of

Kom ons gaan na die projekinstellings.

Gaan na Kliëntsleutels (DSN).

Kopieer die DSN. Dit is SENTRY_DSN.

Ons begin Java met hierdie parameter.

SENTRY_DSN=http://[email protected]:9000/1 mvn exec:java

Ons sien hierdie prentjie.

As ons gaan na UnsupportedOperationException, dan sal ons uitgebreide inligting sien.

Het 'n Telegram-klets geskep met Sentry

https://t.me/sentry_ru

In die volgende reeks:

• Toets LDAP. Die draaiboek is reeds voorberei 9sentry-ldap-auth.sh
• Toets wagweergawe 10.0.X nadat 'n paar klein vrystellings uitgerol is.

Bewaarplek met skrifte:

https://github.com/patsevanton/sentry-rpm

Bron: will.com