Doel
Dit is nodig om 'n VPN-tonnel tussen twee toestelle te organiseer, soos Mikrotik en Juniper van die SRX-lyn.
Wat het ons
Van die Mikrotiks het ons 'n Mikrotik-wiki op die webwerf gekies, 'n model wat IPSec hardeware-enkripsie kan ondersteun, na ons mening, dit blyk redelik kompak en goedkoop te wees, naamlik Mikrotik hEXS.
Die USB-modem is by die naaste selfoonoperateur gekoop, die model was Huawei E3370. Ons het geen operasies uitgevoer om van die operateur te ontkoppel nie. Alles is standaard en deur die operateur self gestik.
Die kern het 'n Juniper SRX240H sentrale router.
Wat het gebeur
Dit was moontlik om 'n werkskema te implementeer wat dit moontlik maak om 'n sellulêre operateur te gebruik, sonder 'n statiese adres, deur 'n modem te gebruik om 'n IPsec-verbinding te skep waarin die GRE-tonnel toegedraai is.
Hierdie verbindingskema word gebruik en werk op Beeline en Megafon USB-modems.
Die konfigurasie is die volgende:
Juniper SRX240H in die kern geïnstalleer
Plaaslike adres: 192.168.1.1/24
Eksterne adres: 1.1.1.1/30
GW: 1.1.1.2
afgeleë punt
Mikrotik hEX S
Plaaslike adres: 192.168.152.1/24
Eksterne adres: Dinamies
'n Klein diagram om die werk te verstaan:
Juniper SRX240 konfigurasie:
JUNOS Sagteware Vrystelling Weergawe [12.1X46-D82]
Juniper-konfigurasie
interfaces {
ge-0/0/0 {
description Internet-1;
unit 0 {
family inet {
address 1.1.1.1/30;
}
}
}
gr-0/0/0 {
unit 1 {
description GRE-Tunnel;
tunnel {
source 172.31.152.2;
destination 172.31.152.1;
}
family inet;
vlan {
unit 0 {
family inet {
address 192.168.1.1/24;
}
}
st0 {
unit 5 {
description "Area - 192.168.152.0/24";
family inet {
mtu 1400;
}
}
routing-options {
static {
route 0.0.0.0/0 next-hop 1.1.1.2;
route 192.168.152.0/24 next-hop gr-0/0/0.1;
route 172.31.152.0/30 next-hop st0.5;
}
router-id 192.168.1.1;
}
security {
ike {
traceoptions {
file vpn.log size 256k files 5;
flag all;
}
policy ike-gretunnel {
mode aggressive;
description area-192.168.152.0;
proposal-set standard;
pre-shared-key ascii-text "mysecret"; ## SECRET-DATA
}
gateway gw-gretunnel {
ike-policy ike-gretunnel;
dynamic inet 172.31.152.1;
external-interface ge-0/0/0.0;
version v2-only;
}
ipsec {
}
policy vpn-policy0 {
perfect-forward-secrecy {
keys group2;
}
proposal-set standard;
}
vpn vpn-gretunnel {
bind-interface st0.5;
df-bit copy;
vpn-monitor {
optimized;
source-interface st0.5;
destination-ip 172.31.152.1;
}
ike {
gateway gw-gretunnel;
no-anti-replay;
ipsec-policy vpn-policy0;
install-interval 10;
}
establish-tunnels immediately;
}
}
policies {
from-zone vpn to-zone vpn {
policy st-vpn-vpn {
match {
source-address any;
destination-address any;
application any;
}
then {
permit;
log {
session-init;
session-close;
}
count;
}
}
}
from-zone trust to-zone vpn {
policy st-trust-to-vpn {
match {
source-address any;
destination-address any;
application any;
}
then {
permit;
log {
session-init;
session-close;
}
count;
}
}
}
from-zone vpn to-zone trust {
policy st-vpn-to-trust {
match {
source-address any;
destination-address any;
application any;
}
then {
permit;
log {
session-init;
session-close;
}
count;
}
}
}
zones {
security-zone trust {
vlan.0 {
host-inbound-traffic {
system-services {
all;
}
protocols {
all;
}
}
}
security-zone vpn {
interfaces {
st0.5 {
host-inbound-traffic {
protocols {
ospf;
}
}
}
gr-0/0/0.1 {
host-inbound-traffic {
system-services {
all;
}
protocols {
all;
}
}
}
security-zone untrust {
interfaces {
ge-0/0/0.0 {
host-inbound-traffic {
system-services {
ping;
ssh;
ike;
}
}
}
}
}
vlans {
vlan-local {
vlan-id 5;
l3-interface vlan.1;
}Mikrotik hEX S-konfigurasie:
RouterOS sagteware weergawe [6.44.3]
Mikrotik konfigurasie
/ip address
add address=172.31.152.1/24 comment=GRE-Tunnel interface=gre-srx network=172.31.152.0
add address=192.168.152.1/24 comment=Local-Area interface=bridge network=192.168.152.0
/interface gre
add comment=GRE-Tunnel-SRX-HQ !keepalive local-address=172.31.152.1 name=gre-srx remote-address=172.31.152.2
/ip ipsec policy group
add name=srx-gre
/ip ipsec profile
add dh-group=modp1024 dpd-interval=10s name=profile1
/ip ipsec peer
add address=1.1.1.1/32 comment=GRE-SRX exchange-mode=aggressive local-address=172.31.152.1 name=peer2 profile=profile1
/ip ipsec proposal
set [ find default=yes ] enc-algorithms=aes-256-cbc,aes-128-cbc,3des
add enc-algorithms=aes-128-cbc,3des name=proposal1
/ip route
add distance=10 dst-address=192.168.0.0/16 gateway=gre-srx
/ip ipsec identity
add comment=IPSec-GRE my-id=address:172.31.152.1 peer=peer2 policy-template-group=srx-gre secret=mysecret
/ip ipsec policy
set 0 disabled=yes
add dst-address=0.0.0.0/0 proposal=proposal1 sa-dst-address=1.1.1.1 sa-src-address=172.31.152.1 src-address=172.31.152.0/30 tunnel=yes
/ip address
add address=172.31.152.1/24 comment=GRE-Tunnel interface=gre-srx network=172.31.152.0
add address=192.168.152.1/24 comment=Local-Area interface=bridge network=192.168.152.0
Gevolg:
Juniper SRX kant
netscreen@srx240> ping 192.168.152.1
PING 192.168.152.1 (192.168.152.1): 56 data bytes
64 bytes from 192.168.152.1: icmp_seq=0 ttl=64 time=29.290 ms
64 bytes from 192.168.152.1: icmp_seq=1 ttl=64 time=28.126 ms
64 bytes from 192.168.152.1: icmp_seq=2 ttl=64 time=26.775 ms
64 bytes from 192.168.152.1: icmp_seq=3 ttl=64 time=25.401 ms
^C
--- 192.168.152.1 ping statistics ---
4 packets transmitted, 4 packets received, 0% packet loss
round-trip min/avg/max/stddev = 25.401/27.398/29.290/1.457 msVan Mikrotik se kant af
net[admin@GW-LTE-] > ping 192.168.1.1
SEQ HOST SIZE TTL TIME STATUS
0 192.168.1.1 56 64 34ms
1 192.168.1.1 56 64 40ms
2 192.168.1.1 56 64 37ms
3 192.168.1.1 56 64 40ms
4 192.168.1.1 56 64 51ms
sent=5 received=5 packet-loss=0% min-rtt=34ms avg-rtt=40ms max-rtt=51ms Bevindinge
Na die werk wat gedoen is, het ons 'n stabiele VPN-tonnel ontvang, vanaf die afgeleë netwerk het ons toegang tot die hele netwerk wat agter Juniper geleë is, en dienooreenkomstig terug.
Ek beveel nie aan om IKE2 in hierdie skema te gebruik nie, daar was 'n situasie dat IPSec nie styg na die herlaai van een of ander toestel nie.
Bron: will.com