_______ ________ __ | |.ββ.ββ.ββ.| | | |.β-.| |_ | β || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M ββββββββββββββββββ OpenWrt 24.10.5, r29087-d9c5716d1d ββββββββββββββββββ
On December 19, OpenWrt 24.10.5 was released β an operating system based on the Linux kernel, designed for embedded devices.
Key changes in the release:
Security fixes:
New devices added:
- mediatek: ASUS TUF-AX4200Q;
- mediatek: Cudy WR3000P v1;
- mediatek: ipTIME AX7800M-6E;
- mediatek: Konka KOMI A31;
- mediatek: Totolink X6000R;
- mediatek: WAVLINK WL-WN536AX6 Rev a;
- ramips: Cudy AP1300 Outdoor v1;
- ramips: Cudy C200P;
- ramips: Cudy R700;
- ramips: Cudy RE1200 Outdoor v1;
- ramips: Hongdian H8850 v20;
- rockchip: LinkEase EasePi R1;
- rockchip: Lunzn FastRhino R66S.
Fixes
- airoha: Numerous improvements.
- ath79 (TP-Link Archer C60 v2): Fixed operation of Wi-Fi 5 GHz.
- bmips (Sagem @ ST3864OP): Fixed LED operation.
- ipq4019 (AVM FritzBox 7530): Fixed RX frame length on the DSL interface.
- ipq806x: Migration of Wi-Fi configuration when rolling back from kernel 6.12.
- mediatek (Cudy AP3000 v1): Fixed lack of IPv4 address on the interface in failsafe mode.
- mediatek (Cudy WR3000H): Fixed order of Ethernet ports.
- mediatek (Zbtlink ZBT Z8102AX V2): Fixed size of the ubi partition.
- mpc85xx (Sophos RED 15w): Fixed NAND partitions.
- mpc85xx (Watchguard Firebox T10): Fixed booting issue.
- mvebu (GL.iNet GL-MV1000): Fixed sdhci1 controller.
- ramips: Improved support for eMMC and SD cards.
Various fixes and improvements:
- ath11k: Fixed queue flushing.
- dropbear: Backported security fixes; added configurable port forwarding options.
- imagebuilder: Fixed image generation for certain devices.
- kernel: Added support for ESMT F50L1G41LC flash memory chips (in new Cudy boards) and Fudan Micro FM25S01BI3.
- mwl8k: Improved stability in access point (AP) mode.
- odhcpd: Fixed memory leaks.
- ppp: Added options reqprefix, norelease and ac_mac.
Core components update
- Linux kernel: updated from 6.6.110 to 6.6.119.
- mac80211: updated from 6.12.52 to 6.12.61.
- mt76: updated from 2025-09-15 to 2025-11-06.
- wireless-regdb: updated from 2025.07.10 to 2025.10.07.
Update to version 24.10
To upgrade from 23.05 to 24.10, you can use Sysupgrade, while retaining settings in most cases. Updates within the stable 24.10 series are also supported. Attended Sysupgrade, allowing installed packages to be retained.
- Sysupgrade from version 22.03 to 24.10 is officially unsupported.
- For the ipq806x platform (Qualcomm Atheros), there is no config migration path as it has transitioned to DSA. Update without saving settings.
- Linksys E8450 / Belkin RT3200: Users on version 23.05 and below need to use the installer v1.1.3 or newer to reorganize UBI partitions. Updating without the installer will result in the device becoming 'bricked'. Details in Wiki
- Xiaomi AX3200 / Redmi AX6S: On version 23.05 and below, you need to follow a special procedure from Wiki to increase available memory. Updating without this guidance will render the device inoperable.
- Zyxel GS1900 series switches: Due to partition layout changes, a clean installation (factory install) via the initramfs image is required. Sysupgrade is not possible. After updating, do not restore the file /etc/config/system from backup.
Known Issues
- LEDs for Airoha AN8855 are not supported yet. On devices like Xiaomi AX3000T, switch indicators will be turned off. A fix is expected in upcoming SNAPSHOT builds and minor release 24.10.
- 5 GHz Wi-Fi does not work on some devices with ath10k chipsets (e.g., Phicomm K2T, TP-Link Archer C60 v3). Details in the ticket #14541.
Source: linux.org.ru
