Corsair IronClaw RGB Wireless Mouse with 18 DPI sensor does not need a wire

Corsair has expanded its range of input devices with the introduction of the IronClaw RGB Wireless for gamers.

Corsair IronClaw RGB Wireless Mouse with 18 DPI sensor does not need a wire

The novelty can connect to a PC in three ways. This is, in particular, a wireless connection through a small transceiver with a USB interface. Implemented proprietary technology ultra-fast response SlipStream. It is claimed that the delay in wireless communication with a computer is less than 1 ms.

Corsair IronClaw RGB Wireless Mouse with 18 DPI sensor does not need a wire

The second connection method is Bluetooth wireless technology. Finally, the manipulator can be connected to a computer using a 1,8-meter cable with a USB connector. The polling frequency reaches 1000 Hz.

Corsair IronClaw RGB Wireless Mouse with 18 DPI sensor does not need a wire

The mouse carries a Pixart PMW3391 sensor with a resolution of up to 18 DPI (dots per inch). This value can be changed in 000 DPI increments.

The manipulator received ten programmable buttons. Omron's main switches are rated for 50 million operations.

Corsair IronClaw RGB Wireless Mouse with 18 DPI sensor does not need a wire

Multi-color RGB backlighting with three zones is provided. The device weighs approximately 130 grams. Claimed battery life on a single battery charge reaches 60 hours (when using Bluetooth and with the backlight off).

The Corsair IronClaw RGB Wireless mouse will be available for $80. 



Source: 3dnews.ru

Add a comment