Chinese robot vacuum cleaner manufacturer
The ILIFE A9s model, which combines the functions of sweeping and mopping, can be attributed to the latter. This device was first demonstrated to the general public in January of this year at an exhibition held in Las Vegas.
Contents of delivery
The device comes in a double cardboard box, traditional for ILIFE robots: a suitcase with printing and a plastic handle is placed in another box that protects it from external influences. Inside, in addition to the vacuum cleaner itself, the following accessories were found:
- power adapter 19 V / 0,6 A;
- charging station;
- remote control with a pair of AAA batteries;
- a device for organizing an invisible “wall” Electrowall with a pair of AA batteries;
- rotary brush with bristles;
- spare set of side brushes;
- spare fine filter;
- water tank;
- two cloth mops;
- brush for cleaning the vacuum cleaner;
- short and detailed printed manuals for working with the device in different languages, including Russian.
In addition to the accessories that are separately in the box, the vacuum cleaner has already been installed:
- removable battery;
- rubber rotary brush for smooth surfaces;
- two side brushes;
- container for collecting debris and dust;
- filters.
The manufacturer did not forget anything and even put additional consumables. The delivery set of ILIFE A9s pleasantly pleases the eye with its diversity. It is immediately clear that this robot boasts not only dust cleaning.
Technical specifications
Cleaning robot ILIFE A9s | |
SENSORS | Camera optical PanoView Obstacle detection sensors Height difference sensors |
Waste container volume, l | 0,6 |
Modes of operation | Vacuum cleaner ("Auto" with normal and maximum power, "Local", "Along the walls", "Scheduled", "Manual") floor washing |
Battery type | Li-ion, 2600 mAh |
Battery charging time, min | 300 |
Operating time, min | 120 |
Power adapter | 19 V / 0,6 A |
Dimensions, mm | Ø330 × 76 |
Weight, kg | 2,55 |
Estimated price*, rub. | 22 100 |
* Approximate price of the AliExpress trading platform at the time of writing
One of the key features of the novelty is the way the robot is oriented in space. In addition to traditional obstacle detection sensors and height difference sensors that prevent the device from falling off a ladder or parapet, the ILIFE A9s has the PanoView system, which we already met when we tested
The built-in camera has a maximum viewing angle, allowing the robot to see not only the ceiling, but also tall objects or walls. Information about all other obstacles that arise in the way of the device, the control system receives from twenty-two detection sensors: mechanical, located behind the movable front bumper, and infrared, located in the lower part of the body and warning of a height difference. Well, a motion sensor under the front wheel serves to monitor the distance traveled. ILIFE's obstacle detection system even has its own name: OBS All-Terrain.
We are familiar with the new cleaning system from other models of ILIFE robot cleaners. We are talking about the well-established CyclonePower Gen 3, the elements of which we will definitely look at in a more detailed acquaintance with the design of the robot. In the meantime, we note that this system is based on a high-quality brushless motor from a Japanese company.
But ILIFE A9s can not only vacuum the floor, but also wash it. The washing technology is not new, but its implementation in the novelty is very unusual, and it is used in ILIFE robots for the first time. It is based on a vibrating platform with a cleaning pad, driven by a motor housed in the same container as the water tank. From the latter, water flows through the smallest holes directly onto the napkin, wetting it continuously, throughout the entire cleaning process.
The next feature of ILIFE A9s is the ability to control the robot from a smartphone, which was previously implemented in the model
Well, the final major technical feature of the novelty is not new for robots from other manufacturers, but ILIFE is used for the first time. We are talking about a virtual wall Electrowall, blocking the path of the robot in those corners of your home, wherever you want to let him. The barrier is installed using an additional accessory, which is placed on the floor and, when turned on, forms a barrier in front of it - invisible to humans, but visible to the robot. Unfortunately, the manufacturer does not disclose the features of this accessory, but it is definitely possible to quickly and easily limit the cleaning space, for example, to one room, or to make the vacuum cleaner work in a small nook in the kitchen.
Against the background of all the technologies described above, the presence of a voice notification function about the current state of the novelty no longer looks something unusual. However, we are already familiar with the i-Voice function from some other models of ILIFE cleaners. Judging by the above list of technologies, we can confidently say that this is the most high-tech model of ILIFE.
Appearance and ergonomics
Despite the fact that the body of the new robot is made in the form of the same large puck, the appearance of the novelty makes a much more pleasant impression than that of its counterparts. The ILIFE A9s model cannot be called boring and inexpressive, and the continuity of generations in this case can be traced. It's all about the presence of metal parts in the design of the case. The bumper, as well as the rear of the body, are lined with wide silver edging made of aluminum alloy. The central part of the top panel is also made of it. Well, everything else is traditionally made of black plastic. As a result, the robot became similar to a turntable with a vinyl record. The only thing missing is some inscription in the central part for even greater similarity. Such a device can really become a home decoration that you don’t want to shove away under the bed.
By the way, under the bed, this robot will enter without difficulty. Its height is only 76 mm, which allows it to dust or clean the floor even under some sofas, cabinets or chests of drawers. Unlike other models of ILIFE cleaners, the front bumper, behind which mechanical obstacle detection sensors are hidden, looks very massive in the novelty. It is unlikely that this can somehow affect the performance of the device. Rather, it's just a tribute to design. Moreover, the impact-absorbing strip of soft material is still glued along the entire length of the bumper, so you should not expect hard collisions of this robot with furniture and other elements of your apartment design.
In addition to decorative elements, an optical camera is placed on the upper part of the body, scanning the space above the robot and transmitting information to the control unit to build a map of the room. There is also a round button to start the device, as well as a Wi-Fi connection indicator. The power off button is located on the side surface, next to the connector for connecting the power adapter. The latter can be useful to you if for some reason you do not want or cannot use the charging station. On the side of the case, you can also notice the holes for air outlet.
The waste container and water tank are traditionally placed at the rear of the cleaner. The lock with automatic fixation of these accessories has proven itself well on other ILIFE models. Spontaneous or accidental detachment of containers will definitely not happen. To remove the container from the case, you just need to press the massive button on the back of it, and then pull back.
|
|
|
The bottom of the body is basically the same as most other ILIFE robot vacuum cleaners of the latest generations. The ILIFE A9s retained the "off-road" suspension of large main wheels with huge travel, allowing the robot to overcome high obstacles. The side wheels are equipped with individual drives and are made of plastic with a soft tire with a deep tread for better grip on different types of floor coverings. These wheels have a sufficiently large diameter and a large suspension travel, which is necessary for the device to overcome high obstacles.
In front of the case, between the pads for recharging the built-in battery from the charging station, a third removable wheel is attached, which does not have a drive, but provides the device with a third point of support. Under the wheel is a sensor that tracks the distance traveled.
Three more infrared sensors, designed to control the height difference, are located on the bottom of the case. Well, the obstacle detection sensors are located behind the front bumper of the device. Unfortunately, it is not possible to determine their number without opening the case, and the manufacturer does not provide detailed data.
We are also familiar with the main cleaning (sweeping) system from other models of ILIFE robots. It is based on three-beam brushes in the front of the body, a rotary brush in the center and an air pump with an air duct, combined with the corresponding compartment of the trash container. The side three-beam brushes of the robot can be easily removed and put in place without the use of tools.
The central rotary brush is also easily removed, installed in a special floating pocket, which provides maximum pressing to the floor surface. This brush has a certain direction of rotation and is driven by a motor located on one side when the vacuum cleaner is running. As is the case with other ILIFE robot vacuum cleaners, the new items are supplied with two different rotary brushes designed for different surfaces. For smooth floors, it is better to use brushes with soft rubber combs, and for carpets, a brush with hard bristles is suitable.
The CyclonePower Gen 3 cleaning system features two air paths stacked one above the other. Dust and debris are swept into the central hole with brushes and rise along the lower path by a pump into a removable container. The latter has a filter kit in the upper part, through which air is drawn through the clean upper path, after which it is thrown out through the side openings in the housing.
The waste container for ILIFE A9s is exactly the same as we saw in other models from this manufacturer. In it, everything is thought out literally to the smallest detail. It is very convenient to open it and throw out the trash without getting your hands dirty. Easy to clean filter. It is easy to wash and clean. Well, access to the “dirty” compartment is closed by a small plastic door that prevents accidental debris from getting out. Unless it would be worth thinking a little more about the design of the filter package. As the longer operating experience of other models of ILIFE robots has shown, the fine filter of the HEPA type clogs up quite quickly in them - after six months it has to be changed. However, its cost is only about three hundred rubles.
But the ILIFE A9s comes with a second container or tank, which is already designed for water. It is made in the same style and from the same translucent plastic as the dust container, but it has a completely different design. In the upper part of the second container there is a filler neck with a large rubber plug, but the water tank itself occupies only a small volume. In general, the entire volume of this container is divided into three parts. In addition to the water tank, it also has an engine compartment (in the upper and central parts), as well as a small container for collecting dust and debris. This is a completely new container design, although some of its elements are borrowed from other models.
The engine compartment is waterproof, but the manufacturer still prohibits lowering the entire container under water. On one of the side faces of this compartment, there are contact pads for connecting to mating parts on the robot body. Well, from below, through large rubber cones, the engine itself is connected to a large plastic base with Velcro for attaching a napkin for washing the floor. The water tank is combined with the same base, which is displayed on a napkin through the smallest holes. The motor provides vibration platform with a napkin. At the same time, water from the water tank soaks the napkin, and the robot, moving, wipes the floor.
In order not to smear dust on the floor on the way, the floor wiping mode also has a sweeping function. That's just the capacity for debris and dust in the second container is very limited. It is quite obvious that it is better to vacuum the floor first, and only then, after replacing the container, wash it. As you can see, ILIFE A9s is not similar to any of the models of robots from different manufacturers that we met earlier in terms of the nature of cleaning. The more interesting it will be to find out how this device will show itself in operation.
But before we start testing, let's take another look at the remaining accessories that come with the ILIFE A9s. We are already familiar with something from other models of ILIFE robots, but we meet something for the first time. The latter include a device that organizes a virtual barrier for the robot, called the manufacturer Electrowall. It is a compact plastic box installed on the floor, on one of the side faces of which there is an emitter. On top of the device, you can see very clear instructions on which side it should be oriented to the fenced area, and which side to the working area. Also on the top side of Electrowall there is a sliding power button and a green LED indicator informing the user about the operation. The device is powered by a pair of AA batteries.
The charging station of the novelty is absolutely no different from similar devices of all other models of cleaners from this manufacturer. It has a very simple design with a large horizontal platform on which spring contacts are placed for charging the vacuum cleaner. At the top there is a power indicator, and at the bottom there is a connector for connecting the adapter.
We are also familiar with the remote control. Its main feature is the presence of a small LCD display, which displays the operating mode of the device, the current time and the time of the upcoming cleaning when programming the robot. The remote control has a ring with control arrows and a central button, as well as six buttons for activating various operating modes, searching for a charging station and setting a cleaning timer. The remote control is powered by two AAA batteries.
Source: 3dnews.ru