OpenWRT 24.10.5.

_______ ________ __ | |.——.——.——.| | | |.—-.| |_ | — || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |___| |__| WIRELESSFREEDOM —————————————————— OpenWrt 24.10.5, r29087-d9c5716d1d ——————————————————

On December 19, OpenWrt 24.10.5, an operating system based on the kernel, was released. Linux, designed for embedded devices.

Main changes in the release:

• Security fixes:

  • CVE-2025-14282: Privilege escalation in Dropbear via forwarding Unix domain socket.

• New devices added:

  • mediatek: ASUS TUF-AX4200Q;
  • mediatek: Cudy WR3000P v1;
  • mediatek: ipTIME AX7800M-6E;
  • mediatek: Konka KOMI A31;
  • mediatek: Totolink X6000R;
  • mediatek: WAVLINK WL-WN536AX6 Rev a;
  • ramips: Cudy AP1300 Outdoor v1;
  • ramips: Cudy C200P;
  • ramips: Cudy R700;
  • ramips: Cudy RE1200 Outdoor v1;
  • ramips: Hongdian H8850 v20;
  • rockchip: LinkEase EasePi R1;
  • rockchip: Lunzn FastRhino R66S.

• Rectification

  • airoha: Lots of improvements.
  • ath79 (TP-Link Archer C60 v2): Fixed 5 GHz Wi-Fi issue.
  • bmips (Sagem @ ST3864OP): Fixed LED operation.
  • ipq4019 (AVM FritzBox 7530): Fixed RX frame length on DSL interface.
  • ipq806x: Migrating Wi-Fi configuration when rolling back from kernel 6.12.
  • mediatek (Cudy AP3000 v1): Fixed the absence of an IPv4 address on the interface in failsafe mode.
  • mediatek (Cudy WR3000H): Fixed the order of Ethernet ports.
  • mediatek (Zbtlink ZBT Z8102AX V2): Fixed ubi partition size.
  • mpc85xx (Sophos RED 15w): Fixed NAND partitions.
  • mpc85xx (Watchguard Firebox T10): Fixed boot issue.
  • mvebu (GL.iNet GL-MV1000): Fixed sdhci1 controller.
  • ramips: Improved support for eMMC and SD cards.

• Various fixes and improvements:

  • ath11k: Fixed clearing of transmission queue.
  • dropbear: Backport security fixes; added configurable port forwarding options.
  • imagebuilder: Fixed image generation for some devices.
  • kernel: Added support for ESMT F50L1G41LC (in new Cudy boards) and Fudan Micro FM25S01BI3 flash memory chips.
  • mwl8k: Improved stability in access point (AP) mode.
  • odhcpd: Fixed memory leaks.
  • ppp: Added reqprefix, norelease and ac_mac options.

• Updating core components

  • Core Linux: update from 6.6.110 to 6.6.119.
  • mac80211: Updated from 6.12.52 to 6.12.61.
  • mt76: update from 2025-09-15 to 2025-11-06.
  • wireless-regdb: update from 2025.07.10 to 2025.10.07.

Update to version 24.10

To upgrade from 23.05 to 24.10, you can use Sysupgrade, which will preserve your settings in most cases. Upgrades within the 24.10 stable series are also supported. Attended Sysupgrade, which allows you to save installed packages.

• Sysupgrade from version 22.03 to 24.10 is not officially supported.
• For the ipq806x (Qualcomm Atheros) platform there is no configuration migration path as there has been a transition to DSAUpdate without saving settings.
• Linksys E8450 / Belkin RT3200: Users on version 23.05 and below must use the installer v1.1.3 or newer to reorganize UBI partitions. Updating without the installer will brick the device. Details in Wiki
• Xiaomi AX3200 / Redmi AX6S: On version 23.05 and below you need to follow special procedure from Wiki To increase available memory. Updating without this guide will render the device inoperable.
• Zyxel GS1900 Series Switches: Due to partition layout changes, a clean installation (factory install) using the initramfs image is required. Sysupgrade is not possible. After the upgrade, do not restore the /etc/config/system file from a backup.

Known Issues

• LEDs for the Airoha AN8855 are not yet supported. On devices like the Xiaomi AX3000T, the switch LEDs will be disabled. A fix is ​​expected in upcoming SNAPSHOT builds and the minor release 24.10.
• 5 GHz Wi-Fi doesn't work on some devices with ATH10K chipsets (e.g., Phicomm K2T, TP-Link Archer C60 v3). For more details, see the ticket. #14541.

Source: linux.org.ru