A few weeks ago, Oppo introduced its new flagship Oppo Reno devices. So far, the company has launched two models in China β ΠΈ .
The latter is the most interesting but is currently only available for pre-order even in China, so The Reno 10X Zoom Edition teardown is of double interest, showing the innards of an unusual flagship device.
Removing the back plastic cover of the phone reveals that it is connected to the NFC chip. The company has made some changes to both sides of the cover, including adding grooves for the heat sink gel and for cable routing to the flash.
Moving forward, we can see two main features of the smartphone - a new unique pop-up camera mechanism and a triple camera array that allows for a 10x hybrid optical zoom on the back. Thanks to these two features, the printed motherboard had to be made quite compact compared to other devices.
The device seems to provide a good level of heat dissipation from the motherboard, which received metal shields both front and back, as well as uniform copper foil. In addition, silicone grease and gel have been added to the front and back of the main chip in the face of the Snapdragon 855. The precision and build quality is on par with flagship devices.
The smartphone has a unique mechanism that pushes the front camera, speaker, microphone and rear flash on an asymmetrical rotating structure, and the engine is located on the right side. The volume of the transmission part is small and designed to minimize the sound of movement. The lifting mechanism provides for a circular motion. The guide is made of a metal frame, which provides increased stability.
The 10x hybrid zoom camera is equipped with a 48MP main sensor, an 8MP wide-angle module and a 13MP telephoto module. These three lenses are held together in an L-frame and fixed with gel.
The periscope lens measures 11,5 x 5,7 x 24,5 mm and is individually packaged in its own metal cover. It can be seen that the lenses and the refractive prism are much larger than the usual size for smartphones. To combat jitter in telephoto mode, the company uses an electromagnetic motor.
Source: 3dnews.ru