Renders of the protective case revealed the design of the smartphone OnePlus 7

At the disposal of network sources were renderings of the OnePlus 7 smartphone, shown in various protective cases. The images provide an idea of ​​the design of the apparatus.

Renders of the protective case revealed the design of the smartphone OnePlus 7

It can be seen that the novelty is equipped with a display with narrow frames. This screen has neither a cutout nor a hole for the front camera. The corresponding module will be made in the form of a retractable periscope block, hidden in the upper part of the case.

According to available information, the resolution of the selfie camera will be 16 million pixels. In the back, you can see a triple main camera: it will allegedly include sensors for 48 million, 20 million and 5 million pixels.

Renders of the protective case revealed the design of the smartphone OnePlus 7

The electronic β€œbrain” of the device, according to rumors, will be the Qualcomm Snapdragon 855 processor. This chip combines eight Kryo 485 cores with a clock frequency of 1,80 GHz to 2,84 GHz, an Adreno 640 graphics accelerator and a Snapdragon X4 LTE 24G modem.


Renders of the protective case revealed the design of the smartphone OnePlus 7

At the bottom of the OnePlus 7, you can see a symmetrical USB Type-C port. There is no 3,5mm headphone jack.

Renders of the protective case revealed the design of the smartphone OnePlus 7

Earlier it was reported that the smartphone will carry up to 12 GB of RAM and a flash drive with a capacity of up to 256 GB. Power will be provided by a 4000 mAh battery. The announcement of new items is expected in the current quarter. 




Source: 3dnews.ru

Add a comment