SilverStone has introduced the Milo 10 (SST-ML10B) Mini-ITX computer case with a unique feature. The novelty allows you to change its dimension, increasing the available volume for installing larger and more productive components.
The case comes with two sets of interchangeable front and top panels that increase the Milo 10's standard 63mm height to 84mm. At the same time, its volume will also increase - from 2,8 to 3,7 liters.
The modular design of Milo 10 allows you to create up to five configurations to accommodate different components. In the standard configuration, there is enough space inside to install two 2,5-inch drives and an air cooling system for a processor up to 31 mm high. Drives are installed on the included bracket. The second configuration allows you to install a 3,5-inch hard drive, as well as a CO up to 29 mm high.
The third configuration offers an NVMe M.2 SSD on the motherboard. This will create enough space inside the case to install an additional 120 or 140 mm cooling fan, as well as a CPU cooler up to 36 mm high.
For the fourth configuration, it is proposed to replace the front and top cover, install a bracket for installing two 2,5-inch SSDs, as well as a processor cooler up to 47 mm high.
The last fifth configuration allows you to move an additional fan outside the top cover, and install an air CPU cooler up to 63 mm high inside.
If desired, three additional 50mm cooling fans can also be installed inside the case. On air CO models are indicated that will fit into the novelty.
The front panel of Milo 10 contains only two USB 3.0 connectors, as well as a power button. The case can be placed on a table either horizontally or vertically. It also comes with a VESA mount so the Milo 10 can be hidden behind a monitor to save even more desktop space.
The dimensions of the Milo 10 case in the standard configuration are 196 Γ 63 Γ 227 mm, with the lid raised - 196 Γ 84 Γ 227 mm. The weight of the novelty is 1,4 kg. The manufacturer does not name the price.
Source: 3dnews.ru