Sentry koos oma sõltuvustega RPM-i koosseisu loomine. Sentry installimine RPM-ist, põhiseaded

Kirjeldus

Sentry — teie rakenduste vigade jälgimise tööriist,

Põhifunktsioonid:

• lihtsalt integreeritav projekti,
• püüdma vigu nii kasutaja brauseris kui ka teie serveris.
• Tasuta,
• Vigade loend uuendatakse reaalajas,
• Kui viga on märgitud lahendatuks ja see ilmub uuesti, siis luuakse see uuesti ja arvestatakse eraldi voos,
• Vead rühmitatakse ja kuvatakse esinemissageduse järjekorras,
• Vigu saab filtreerida staatuste, logimise allika, logimise taseme, serveri nime jms järgi.

Võrdlus ELK logidega: kõige tähtsam on, et ELK-is on iga uus samatüüpi logi eraldi kirje. Sentrys on iga uus samatüüpi viga lihtsalt +1 selle kirje loendisse

Sentry toetab enamikku programmeerimiskeeli. Lisainfot siin.

Sentry käivitamine docker ja docker-compose abil

Saate Sentryt käivitada docker ja docker-compose abil nagu siin on kirjeldatud: https://github.com/getsentry/onpremise. Kuid skript käivitab sellel samal serveril üheaegselt (ilma tõrke taastamiseta) lisateenuseid (Sentry versiooni 10.0.0 jaoks):

• data
• postgres
• redis
• zookeeper
• kafka
• clickhouse
• symbolicator

Kui vajate tõrke taastamise funktsionaalsust, peate kas kasutama pilvepaketti või installima Sentry ilma selle skriptita.

Selles postituses on kirjeldatud Sentry ja selle sõltuvuste koostamise protsessi rpm formaadis. Kui peate installima Sentryt kohas, kus ei ole internetti, saate genereerida yum reposti koostatud rpm-dest.

Oluline selgitus pakettide koostamise ja installimise kohta

Mõned paketid sõltuvad teineteisest. Seetõttu on koostamis- ja installimisprotsess jaotatud mitmeks etapiks.

TODO:

Selles postituses käsitletakse Sentry versiooni 9.1.2 koostamist ja installimist. Pärast seda, kui arendajad välja annavad paar väikest versiooni, saab hakata koostama Sentry versiooni 10.X.Y. Paljud viimased commitid master'is on fix (parandused).

Serveri nõuded rpm koostamiseks

Mida rohkem on CPU-d, seda kiiremini toimub semaphore ja symbolic pakettide koostamine

Käivitage Selinux

Ühenduse liikmed toetavad, kui keegi kirjutab Sentryle selinux poliitikad.

sudo sed -i s/^SELINUX=.*$/SELINUX=disabled/ /etc/selinux/config
sudo reboot

Ühendame epel-release reposti

sudo yum install -y epel-release git

Koostame rpm-pip sõltuvused ja installime need. Fail 1general_dependencies.sh

echo "Paigaldame sõltuvused"
sudo yum install -y cargo gcc gcc-c++ libffi-devel libjpeg-devel libxml2-devel 
libxslt libxslt-devel make mc openssl-devel python-devel memcached 
python-lxml python-nose python2-pip python34 rpm-build rpmdevtools 
ruby-devel rubygems zlib-devel redis xmlsec1-openssl xmlsec1 
libtool-ltdl-devel xmlsec1-devel xmlsec1-openssl-devel openldap-devel

echo "Kogume ühised pip sõltuvused rpm fpm kaudu"
gem install --no-document fpm
echo "chardet==3.0.2 jaoks on vajalik setuptools>=12"
echo "cryptography==2.8 jaoks on vajalik setuptools>=18.5"
fpm -s python -t rpm setuptools==18.5
sudo yum install -y python-setuptools-18.5-1.noarch.rpm
fpm -s python -t rpm --name python2-pip pip==20.0.2
sudo yum install -y python2-pip-20.0.2-1.noarch.rpm

Paigaldame ja käivitame PostgreSQL 9.6, et koguda python-psycopg2-binary. Fail 2psycopg2-binary.sh

PostgreSQL versiooni saate skriptis muuta.

sudo yum install -y postgresql-devel
fpm -s python -t rpm psycopg2-binary==2.7.7
sudo yum install -y python-psycopg2-binary-2.7.7-1.x86_64.rpm
sudo yum remove -y postgresql-devel postgresql postgresql-libs

Kogume ja installime python-dateutil rpm. Fail 3dateutil.sh

#!/bin/bash

echo "Build and install python-dateutil rpm"
mkdir -p ~/rpmbuild/{BUILD,RPMS,SOURCES,SRPMS,SPECS}
spectool -g -R spec/python-dateutil.spec
wget https://raw.githubusercontent.com/patsevanton/sentry-rpm/master/spec/python-dateutil-system-zoneinfo.patch -P ~/rpmbuild/SOURCES
wget https://raw.githubusercontent.com/patsevanton/sentry-rpm/master/spec/python-dateutil-timelex-string.patch -P ~/rpmbuild/SOURCES
rpmbuild --bb spec/python-dateutil.spec
sudo yum install -y ~/rpmbuild/RPMS/noarch/python-dateutil-2.4.2-1.el7.noarch.rpm

Kogume ja installime python-urllib3 rpm. Fail 4urllib3.sh

Spoileri pealkiri

echo "Kogume pip sõltuvused rpm fpm kaudu urllib3 jaoks"
fpm -s python -t rpm pycparser==2.19
sudo yum install -y python-pycparser-2.19-1.noarch.rpm
fpm -s python -t rpm cffi==1.14.0
sudo yum install -y python-cffi-1.14.0-1.x86_64.rpm
fpm -s python -t rpm cryptography==2.8
sudo yum install -y python-cryptography-2.8-1.x86_64.rpm
fpm -s python -t rpm idna==2.7
sudo yum install -y python-idna-2.7-1.noarch.rpm
sudo chmod +r \/usr\lib\/python2.7\/site-packages\/idna-2.7-py2.7.egg-info\/PKG-INFO
fpm -s python -t rpm pyOpenSSL==19.1.0
sudo yum install -y python-pyopenssl-19.1.0-1.noarch.rpm
fpm -s python -t rpm pbr==5.4.4
sudo yum install -y python-pbr-5.4.4-1.noarch.rpm
fpm -s python -t rpm mock==2.0.0
sudo yum install -y python-mock-2.0.0-1.noarch.rpm
fpm -s python -t rpm py==1.8.1
sudo yum install -y python-py-1.8.1-1.noarch.rpm
fpm -s python -t rpm six==1.10.0
sudo yum install -y python-six-1.10.0-1.noarch.rpm
fpm -s python -t rpm pluggy==0.6.0
sudo yum install -y python-pluggy-0.6.0-1.noarch.rpm
fpm -s python -t rpm attrs==19.3.0
sudo yum install -y python-attrs-19.3.0-1.noarch.rpm
fpm -s python -t rpm more-itertools==5.0.0
sudo yum install -y python-more-itertools-5.0.0-1.noarch.rpm
fpm -s python -t rpm pytest==3.5.1
sudo yum install -y python-pytest-3.5.1-1.noarch.rpm

echo "Kogume urllib rpm"
spectool -g -R spec\/urllib3-1.24.2.spec
sudo yum-builddep -y spec\/urllib3-1.24.2.spec
rpmbuild --bb spec\/urllib3-1.24.2.spec
sudo yum install -y \/rpmbuild\/RPMS\/noarch\/python-urllib3-1.24.2-1.el7.noarch.rpm

Kogume rpm muud pip sõltuvused ja installime need. Fail 5other_dependencies.sh

Spoileri pealkiri

echo "Käivita rpm fpm abil"
fpm -s python -t rpm jmespath==0.9.5
sudo yum install -y python-jmespath-0.9.5-1.noarch.rpm
fpm -s python -t rpm amqp==1.4.9
sudo yum install -y python-amqp-1.4.9-1.noarch.rpm
fpm -s python -t rpm anyjson==0.3.3
sudo yum install -y python-anyjson-0.3.3-1.noarch.rpm
fpm -s python -t rpm billiard==3.3.0.23
sudo yum install -y python-billiard-3.3.0.23-1.x86_64.rpm
fpm -s python -t rpm docutils==0.16
sudo yum install -y python-docutils-0.16-1.noarch.rpm
fpm -s python -t rpm Pillow==4.2.1
sudo yum install -y python-pillow-4.2.1-1.x86_64.rpm
fpm -s python -t rpm botocore==1.5.70
sudo yum install -y python-botocore-1.5.70-1.noarch.rpm
fpm -s python -t rpm boto3==1.4.5
sudo yum install -y python-boto3-1.4.5-1.noarch.rpm
fpm -s python -t rpm chardet==3.0.2
sudo yum install -y python-chardet-3.0.2-1.noarch.rpm
fpm -s python -t rpm croniter==0.3.31
sudo yum install -y python-croniter-0.3.31-1.noarch.rpm
fpm -s python -t rpm cssselect==1.1.0
sudo yum install -y python-cssselect-1.1.0-1.noarch.rpm
fpm -s python -t rpm cssutils==0.9.10
sudo yum install -y python-cssutils-0.9.10-1.noarch.rpm
fpm -s python -t rpm django-crispy-forms==1.4.0
sudo yum install -y python-django-crispy-forms-1.4.0-1.noarch.rpm
fpm -s python -t rpm django-jsonfield==0.9.13
sudo yum install -y python-django-jsonfield-0.9.13-1.noarch.rpm
fpm -s python -t rpm django-picklefield==0.3.2
sudo yum install -y python-django-picklefield-0.3.2-1.noarch.rpm
fpm -s python -t rpm django-sudo==2.1.0
sudo yum install -y python-django-sudo-2.1.0-1.noarch.rpm
fpm -s python -t rpm django-templatetag-sugar==1.0
sudo yum install -y python-django-templatetag-sugar-1.0-1.noarch.rpm
fpm -s python -t rpm djangorestframework==2.4.8
sudo yum install -y python-djangorestframework-2.4.8-1.noarch.rpm
fpm -s python -t rpm email-reply-parser==0.2.0
sudo yum install -y python-email_reply_parser-0.2.0-1.noarch.rpm
fpm -s python -t rpm enum34==1.1.9
sudo yum install -y python-enum34-1.1.9-1.noarch.rpm
fpm -s python -t rpm functools32==3.2.3.post2
sudo yum install -y python-functools32-3.2.3_2-1.noarch.rpm
fpm -s python -t rpm futures==3.3.0
sudo yum install -y python-futures-3.3.0-1.noarch.rpm
fpm -s python -t rpm hiredis==0.1.6
sudo yum install -y python-hiredis-0.1.6-1.x86_64.rpm
fpm -s python -t rpm honcho==1.0.1
sudo yum install -y python-honcho-1.0.1-1.noarch.rpm
fpm -s python -t rpm httplib2==0.17.0
sudo yum install -y python-httplib2-0.17.0-1.noarch.rpm
fpm -s python -t rpm jsonschema==2.6.0
sudo yum install -y python-jsonschema-2.6.0-1.noarch.rpm
fpm -s python -t rpm kombu==3.0.35
sudo yum install -y python-kombu-3.0.35-1.noarch.rpm
fpm -s python -t rpm celery==3.1.18
sudo yum install -y python-celery-3.1.18-1.noarch.rpm
fpm -s python -t rpm loremipsum==1.0.5
sudo yum install -y python-loremipsum-1.0.5-1.noarch.rpm
fpm -s python -t rpm lxml==4.5.0
sudo yum install -y python-lxml-4.5.0-1.x86_64.rpm
fpm -s python -t rpm milksnake==0.1.5
sudo yum install -y python-milksnake-0.1.5-1.noarch.rpm
fpm -s python -t rpm mistune==0.8.4
sudo yum install -y python-mistune-0.8.4-1.noarch.rpm
fpm -s python -t rpm mmh3==2.3.1
sudo yum install -y python-mmh3-2.3.1-1.x86_64.rpm
fpm -s python -t rpm exam==0.10.6
sudo yum install -y python-exam-0.10.6-1.noarch.rpm
fpm -s python -t rpm msgpack==0.6.2
sudo yum install -y python-msgpack-0.6.2-1.x86_64.rpm
fpm -s python -t rpm oauth2==1.9.0.post1
sudo yum install -y python-oauth2-1.9.0.post1-1.noarch.rpm
fpm -s python -t rpm oauthlib==3.1.0
sudo yum install -y python-oauthlib-3.1.0-1.noarch.rpm
fpm -s python -t rpm parsimonious==0.8.0
sudo yum install -y python-parsimonious-0.8.0-1.noarch.rpm
fpm -s python -t rpm requests==2.20.1
sudo yum install -y python-requests-2.20.1-1.noarch.rpm
fpm -s python -t rpm petname==2.0
sudo yum install -y python-petname-2.0-1.noarch.rpm
fpm -s python -t rpm python-utils==2.3.0
sudo yum install -y python-utils-2.3.0-1.noarch.rpm
fpm -s python -t rpm progressbar2==3.10.1
sudo yum install -y python-progressbar2-3.10.1-1.noarch.rpm
fpm -s python -t rpm pytest-django==2.9.1
sudo yum install -y python-pytest-django-2.9.1-1.noarch.rpm
fpm -s python -t rpm pytest-html==1.9.0
sudo yum install -y python-pytest-html-1.9.0-1.noarch.rpm
fpm -s python -t rpm python-memcached==1.59
sudo yum install -y python-memcached-1.59-1.noarch.rpm
fpm -s python -t rpm python-openid==2.2.5
sudo yum install -y python-openid-2.2.5-1.noarch.rpm
fpm -s python -t rpm python-u2flib-server==4.0.1
sudo yum install -y python-u2flib-server-4.0.1-1.noarch.rpm
fpm -s python -t rpm qrcode==5.3
sudo yum install -y python-qrcode-5.3-1.noarch.rpm
fpm -s python -t rpm querystring-parser==1.2.4
sudo yum install -y python-querystring_parser-1.2.4-1.noarch.rpm
fpm -s python -t rpm redis==2.10.5
sudo yum install -y python-redis-2.10.5-1.noarch.rpm
fpm -s python -t rpm rb==1.7
sudo yum install -y python-rb-1.7-1.noarch.rpm
fpm -s python -t rpm redis-py-cluster==1.3.4
sudo yum install -y python-redis-py-cluster-1.3.4-1.noarch.rpm
fpm -s python -t rpm requests-oauthlib==0.3.3
sudo yum install -y python-requests-oauthlib-0.3.3-1.noarch.rpm
fpm -s python -t rpm percy==2.0.2
sudo yum install -y python-percy-2.0.2-1.noarch.rpm
fpm -s python -t rpm selenium==3.141.0
sudo yum install -y python-selenium-3.141.0-1.noarch.rpm
fpm -s python -t rpm semaphore==0.4.65
sudo yum install -y python-semaphore-0.4.65-1.x86_64.rpm
fpm -s python -t rpm sentry-sdk==0.14.1
sudo yum install -y python-sentry-sdk-0.14.1-1.noarch.rpm
fpm -s python -t rpm setproctitle==1.1.10
sudo yum install -y python-setproctitle-1.1.10-1.x86_64.rpm
fpm -s python -t rpm simplejson==3.8.2
sudo yum install -y python-simplejson-3.8.2-1.x86_64.rpm
fpm -s python -t rpm sqlparse==0.1.19
sudo yum install -y python-sqlparse-0.1.19-1.noarch.rpm
fpm -s python -t rpm statsd==3.1
sudo yum install -y python-statsd-3.1-1.noarch.rpm
fpm -s python -t rpm strict-rfc3339==0.7
sudo yum install -y python-strict-rfc3339-0.7-1.noarch.rpm
fpm -s python -t rpm structlog==16.1.0
sudo yum install -y python-structlog-16.1.0-1.noarch.rpm
fpm -s python -t rpm symbolic==6.1.4
sudo yum install -y python-symbolic-6.1.4-1.x86_64.rpm
fpm -s python -t rpm toronado==0.0.11
sudo yum install -y python-toronado-0.0.11-1.noarch.rpm
fpm -s python -t rpm ua-parser==0.7.3
sudo yum install -y python-ua-parser-0.7.3-1.noarch.rpm
fpm -s python -t rpm uwsgi==2.0.18
sudo yum install -y python-uwsgi-2.0.18-1.noarch.rpm
fpm -s python -t rpm -n PyYAML pyyaml==3.11
sudo yum install -y PyYAML-3.11-1.x86_64.rpm
fpm -s python -t rpm django-auth-ldap==1.2.17
sudo yum install -y python-django-auth-ldap-1.2.17-1.noarch.rpm

Kogume rpm sentry ja installime selle. Fail 6sentry.sh

echo "Paigaldame nodejs ja yarn"
curl -sL https://rpm.nodesource.com/setup_10.x | sudo bash -
sudo yum install -y nodejs
sudo sed -e '/nodesource-source/,+6d' -i /etc/yum.repos.d/nodesource-el7.repo
curl -sL https://dl.yarnpkg.com/rpm/yarn.repo | sudo tee /etc/yum.repos.d/yarn.repo
sudo yum install -y yarn

cp spec/config.yml spec/sentry.conf.py ~/rpmbuild/SOURCES
cp spec/sentry-cron.service spec/sentry-web.service spec/sentry-worker.service ~/rpmbuild/SOURCES
spectool -g spec/sentry-9.1.2.spec
sudo yum-builddep -y spec/sentry-9.1.2.spec
rpmbuild -bb spec/sentry-9.1.2.spec
sudo yum install -y ~/rpmbuild/RPMS/noarch/python-sentry-9.1.2-1.el7.noarch.rpm

Sentry rpm paigaldamine sõltuvustega teisel serveril

Käivitage Selinux

sudo sed -i s/^SELINUX=.*$/SELINUX=disabled/ /etc/selinux/config
#### sudo reboot

Ühendame epel-release reposti

sudo yum install -y epel-release git libjpeg-turbo redis
sudo systemctl start redis

Paigaldame ja käivitame PostgreSQL 9.6. Fail 7postgresql.sh

sudo yum install -y https://download.postgresql.org/pub/repos/yum/reporpms/EL-7-x86_64/pgdg-redhat-repo-latest.noarch.rpm
sudo yum install -y postgresql96 postgresql96-server postgresql96-contrib
sudo /usr/pgsql-9.6/bin/postgresql96-setup initdb
sudo systemctl start postgresql-9.6
sudo -i -u postgres psql -c "create user sentry with password 'password';"
sudo -i -u postgres psql -c "create database sentry with owner sentry;"
sudo -i -u postgres psql -c "alter role sentry superuser;"

# TODO: Kontrollida ilma superuser õigusteta rollile sentry
#sudo -i -u postgres psql -c "alter role sentry nosuperuser;"
#sudo -i -u postgres psql -c "CREATE SCHEMA main AUTHORIZATION sentry;"

Käivitame migratsiooni (andmebaasi skeemi loomine) ja käivitame teenused. Fail 8start_sentry.sh

sudo systemctl start redis
sudo -i -u sentry /usr/bin/sentry --config /etc/sentry/ upgrade
sudo systemctl start sentry-worker
sudo systemctl start sentry-cron
sudo systemctl start sentry-web

Loome Sentry sisemise administraatori

https://forum.sentry.io/t/noninteractive-first-time-setup-of-user-via-upgrade/164

sudo -i -u sentry /usr/bin/sentry --config /etc/sentry/ createuser 

Sentry kogumine rpm, installimine, seadistamine laiskade jaoks

Käivitage Selinux

sudo sed -i s/^SELINUX=.*$/SELINUX=disabled/ /etc/selinux/config
sudo reboot

Käivitame skriptid Sentry kogumiseks ja installimiseks

sudo yum install -y epel-release git
git clone https://github.com/patsevanton/sentry-rpm.git
cd sentry-rpm
./1general_dependencies.sh
./2psycopg2-binary.sh
./3dateutil.sh
./4urllib3.sh
./5other_dependencies.sh
./6sentry.sh
Kopeerime rpm rpmbuild/RPMS ja sentry-rpm juurserverisse. Loome yum repo. Paigaldame kõik kogutud rpm paketid.
./7postgresql.sh
./8start_sentry.sh

Loome Sentry sisemise administraatori

https://forum.sentry.io/t/noninteractive-first-time-setup-of-user-via-upgrade/164

sudo -i -u sentry /usr/bin/sentry --config /etc/sentry/ createuser 

Erandi saatmise testimine

Testime Java projektiga. Laadime alla Java ja Maven.

sudo yum install -y java-1.8.0-openjdk-devel git
sudo wget http://repos.fedorapeople.org/repos/dchen/apache-maven/epel-apache-maven.repo -O /etc/yum.repos.d/epel-apache-maven.repo
sudo yum -y install apache-maven
git clone https://github.com/getsentry/examples.git
cd examples/java/basic
mvn compile exec:java

Nüüd peame käivitama Java, edastades SENTRY_DSN

SENTRY_DSN=https://public:private@host:port/1 mvn exec:java

Nüüd tuleb leida vaikimisi genereeritud SENTRY_DSN.

Logime Sentry sisse. Liigume vaikesuunaga projektile internal.

või

Liigume projekti seadistuste juurde.

Liigume Klientide võtmete (DSN) juurde.

Kopeerime DSN. See on meie SENTRY_DSN.

Käivitame Java selle parameetriga.

SENTRY_DSN=http://633e7361061d4dcaaca53877c4c0e80a@172.26.9.34:9000/1 mvn exec:java

Näeme sellist pilti.

Kui liigume UnsupportedOperationException, näeme laiendatud teavet.

Loomine Telegrami vestlus Sentry kohta

https://t.me/sentry_ru

Järgmistes osades:

• LDAP testimine. Skript on juba valmistatud 9sentry-ldap-auth.sh
• Testida Sentry versioon 10.0.X pärast mõne väikese versiooni väljaandmist.

Skriptide repo:

https://github.com/patsevanton/sentry-rpm

Allikas: habr.com