Helburua
Beharrezkoa da VPN tunel bat antolatzea bi gailuren artean, hala nola SRX lineako Mikrotik eta Juniper.
Zer daukagu
Mikrotiken artean, webgunean Mikrotik wiki bat aukeratu genuen, IPSec hardware enkriptatzea onartzen duen eredua, gure ustez, nahiko trinkoa eta merkea izan zen, hots, Mikrotik hEXS.
USB modema mugikorreko operadore hurbilenari erosi zitzaion, eredua Huawei E3370 zen. Ez dugu operatzailetik desakoplatzeko eragiketarik egin. Dena estandarra da eta operadoreak berak jositakoa da.
Nukleoak Juniper SRX240H bideratzaile zentrala du.
Zer gertatu zen
Operadore zelular bat erabiltzea ahalbidetzen duen lan-eskema bat ezarri ahal izan zen, helbide estatikorik gabe, modem bat erabiliz GRE Tunela bilduta dagoen IPsec konexio bat sortzeko.
Konexio-eskema hau Beeline eta Megafon USB modemetan erabiltzen da eta funtzionatzen du.
Konfigurazioa honakoa da:
Juniper SRX240H nukleoan instalatuta dago
Helbidea: 192.168.1.1/24
Kanpo Helbidea: 1.1.1.1/30
GW: 1.1.1.2
urruneko puntua
Mikrotik hEX S
Helbidea: 192.168.152.1/24
Kanpo Helbidea: Dinamikoa
Diagrama txiki bat lana ulertzeko:
Juniper SRX240 konfigurazioa:
JUNOS Softwarearen bertsioa [12.1X46-D82]
Juniper Konfigurazioa
interfaces {
ge-0/0/0 {
description Internet-1;
unit 0 {
family inet {
address 1.1.1.1/30;
}
}
}
gr-0/0/0 {
unit 1 {
description GRE-Tunnel;
tunnel {
source 172.31.152.2;
destination 172.31.152.1;
}
family inet;
vlan {
unit 0 {
family inet {
address 192.168.1.1/24;
}
}
st0 {
unit 5 {
description "Area - 192.168.152.0/24";
family inet {
mtu 1400;
}
}
routing-options {
static {
route 0.0.0.0/0 next-hop 1.1.1.2;
route 192.168.152.0/24 next-hop gr-0/0/0.1;
route 172.31.152.0/30 next-hop st0.5;
}
router-id 192.168.1.1;
}
security {
ike {
traceoptions {
file vpn.log size 256k files 5;
flag all;
}
policy ike-gretunnel {
mode aggressive;
description area-192.168.152.0;
proposal-set standard;
pre-shared-key ascii-text "mysecret"; ## SECRET-DATA
}
gateway gw-gretunnel {
ike-policy ike-gretunnel;
dynamic inet 172.31.152.1;
external-interface ge-0/0/0.0;
version v2-only;
}
ipsec {
}
policy vpn-policy0 {
perfect-forward-secrecy {
keys group2;
}
proposal-set standard;
}
vpn vpn-gretunnel {
bind-interface st0.5;
df-bit copy;
vpn-monitor {
optimized;
source-interface st0.5;
destination-ip 172.31.152.1;
}
ike {
gateway gw-gretunnel;
no-anti-replay;
ipsec-policy vpn-policy0;
install-interval 10;
}
establish-tunnels immediately;
}
}
policies {
from-zone vpn to-zone vpn {
policy st-vpn-vpn {
match {
source-address any;
destination-address any;
application any;
}
then {
permit;
log {
session-init;
session-close;
}
count;
}
}
}
from-zone trust to-zone vpn {
policy st-trust-to-vpn {
match {
source-address any;
destination-address any;
application any;
}
then {
permit;
log {
session-init;
session-close;
}
count;
}
}
}
from-zone vpn to-zone trust {
policy st-vpn-to-trust {
match {
source-address any;
destination-address any;
application any;
}
then {
permit;
log {
session-init;
session-close;
}
count;
}
}
}
zones {
security-zone trust {
vlan.0 {
host-inbound-traffic {
system-services {
all;
}
protocols {
all;
}
}
}
security-zone vpn {
interfaces {
st0.5 {
host-inbound-traffic {
protocols {
ospf;
}
}
}
gr-0/0/0.1 {
host-inbound-traffic {
system-services {
all;
}
protocols {
all;
}
}
}
security-zone untrust {
interfaces {
ge-0/0/0.0 {
host-inbound-traffic {
system-services {
ping;
ssh;
ike;
}
}
}
}
}
vlans {
vlan-local {
vlan-id 5;
l3-interface vlan.1;
}Mikrotik hEX S konfigurazioa:
RouterOS softwarearen bertsioa [6.44.3]
Mikrotik konfigurazioa
/ip address
add address=172.31.152.1/24 comment=GRE-Tunnel interface=gre-srx network=172.31.152.0
add address=192.168.152.1/24 comment=Local-Area interface=bridge network=192.168.152.0
/interface gre
add comment=GRE-Tunnel-SRX-HQ !keepalive local-address=172.31.152.1 name=gre-srx remote-address=172.31.152.2
/ip ipsec policy group
add name=srx-gre
/ip ipsec profile
add dh-group=modp1024 dpd-interval=10s name=profile1
/ip ipsec peer
add address=1.1.1.1/32 comment=GRE-SRX exchange-mode=aggressive local-address=172.31.152.1 name=peer2 profile=profile1
/ip ipsec proposal
set [ find default=yes ] enc-algorithms=aes-256-cbc,aes-128-cbc,3des
add enc-algorithms=aes-128-cbc,3des name=proposal1
/ip route
add distance=10 dst-address=192.168.0.0/16 gateway=gre-srx
/ip ipsec identity
add comment=IPSec-GRE my-id=address:172.31.152.1 peer=peer2 policy-template-group=srx-gre secret=mysecret
/ip ipsec policy
set 0 disabled=yes
add dst-address=0.0.0.0/0 proposal=proposal1 sa-dst-address=1.1.1.1 sa-src-address=172.31.152.1 src-address=172.31.152.0/30 tunnel=yes
/ip address
add address=172.31.152.1/24 comment=GRE-Tunnel interface=gre-srx network=172.31.152.0
add address=192.168.152.1/24 comment=Local-Area interface=bridge network=192.168.152.0
Emaitza:
Juniper SRX Side
netscreen@srx240> ping 192.168.152.1
PING 192.168.152.1 (192.168.152.1): 56 data bytes
64 bytes from 192.168.152.1: icmp_seq=0 ttl=64 time=29.290 ms
64 bytes from 192.168.152.1: icmp_seq=1 ttl=64 time=28.126 ms
64 bytes from 192.168.152.1: icmp_seq=2 ttl=64 time=26.775 ms
64 bytes from 192.168.152.1: icmp_seq=3 ttl=64 time=25.401 ms
^C
--- 192.168.152.1 ping statistics ---
4 packets transmitted, 4 packets received, 0% packet loss
round-trip min/avg/max/stddev = 25.401/27.398/29.290/1.457 msMikrotik aldetik
net[admin@GW-LTE-] > ping 192.168.1.1
SEQ HOST SIZE TTL TIME STATUS
0 192.168.1.1 56 64 34ms
1 192.168.1.1 56 64 40ms
2 192.168.1.1 56 64 37ms
3 192.168.1.1 56 64 40ms
4 192.168.1.1 56 64 51ms
sent=5 received=5 packet-loss=0% min-rtt=34ms avg-rtt=40ms max-rtt=51ms Findings
Egindako lanaren ostean, VPN tunel egonkor bat jaso genuen, urruneko saretik ipuruaren atzean dagoen sare osorako sarbidea dugu, eta, horren arabera, atzera.
Ez dut gomendatzen IKE2 eskema honetan erabiltzea, gailu bat edo beste berrabiarazi ondoren, IPSec ez da igotzen egoera bat zegoen.
Iturria: www.habr.com