TL; DR: It artikel sprekt oer in handige, rappe en betroubere manier om Linux-programma's te identifisearjen dy't gegevens op skiif skriuwe, wat helpt by it identifisearjen fan grutte of abnormaal frekwinte lading op it skiifsubsysteem, en lit jo ek de overhead fan it bestânsysteem skatte. Dit is benammen wier foar SSD's yn PC's, EMMC's, en Flash-ûnthâld yn single board-kompjûters.
By it skriuwen fan dit artikel ûntduts ik dat it skriuwen fan ferskate kilobytes oan gegevens nei it BTRFS-bestânsysteem resulteart yn it skriuwen fan 3 megabytes fan echte gegevens op skiif.
Ynlieding
"Oh, ûnsin, de ûnthâldsellen op moderne SSD's sille mislearje nei tsientallen jierren fan normaal gebrûk, meitsje jo der gjin soargen oer, folle minder transferswap, firtuele masines en de browserprofylmap nei de HDD" - in typysk antwurd op 'e fraach oer de betrouberens fan solid-state driuwfearren mei garandearre ≈150 TBW. As jo skatte hoefolle gegevens in typyske software kin skriuwe, liket it derop dat 10-20 GB per dei al in grut figuer is, lit der in maksimum fan 40 GB wêze, folle mear. Sjoen dizze sifers is it antwurd frij ridlik - it duorret 10 jier om te berikken garandearre wearden foar it oantal sellen oerskreaun, mei 40 GB oan opnommen gegevens deistich.
Yn 6 jier brûk ik lykwols al myn tredde SSD: de controller fan 'e earste mislearre, en de twadde begon ferskate kearen deis gegevens te ferpleatsen tusken sellen, wat resultearre yn 30-sekonden fertragingen yn' e opnametsjinst.
Nei 7 moannen fan it brûken fan de nije SSD, besleat ik de hoemannichte skreaune gegevens te kontrolearjen, lykas rapporteare troch it stasjon sels fia SMART.
19.7TB.
Yn mar 7 moannen haw ik 13% fan 'e garandearre hoemannichte opnommen gegevens brûkt, nettsjinsteande it feit dat it is konfigureare yn oerienstimming mei de oanbefellings foar it ôfstimmen fan partysjes en it ynstellen fan' e FS, ik brûk hast noait swap, de firtuele masine-skiven lizze op HDD!
Dit is in abnormaal grut sifer; op dit taryf sil de garânsje TBW oerskreaun wurde foardat de 5-jierrige skiifgarantieperioade wurdt berikt. En myn kompjûter kin net skriuwe 93 gigabytes per dei! Wy moatte kontrolearje hoefolle gegevens yn 10 minuten op skiif skreaun binne ...
Total:
Writes Queued: 24,712, 2,237MiB
Writes Completed: 25,507, 2,237MiB
Write Merges: 58, 5,472KiB
2.2 gib, oh-ho-ho!
Bepale de hoemannichte gegevens skreaun nei in skiif apparaat
As jo apparaat SMART (SSD, EMMC, guon yndustriële MicroSD) stipet, dan is it earste wat jo moatte dwaan is om gegevens fan it stasjon oan te freegjen mei programma's smartctl, skdump of mmc (fan mmc-utils).
Foarbyld útfier fan smartctl programma
$ sudo smartctl -a /dev/sdb
smartctl 7.0 2019-03-31 r4903 [x86_64-linux-5.3.11-200.fc30.x86_64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Samsung based SSDs
Device Model: Samsung SSD 860 EVO mSATA 250GB
Serial Number: S41MNC0KA13477K
LU WWN Device Id: 5 002538 e700fa64b
Firmware Version: RVT41B6Q
User Capacity: 250 059 350 016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: mSATA
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Tue Nov 19 01:48:50 2019 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 85) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 5171
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 459
177 Wear_Leveling_Count 0x0013 096 096 000 Pre-fail Always - 62
179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0
181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0
182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0
183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0
187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0032 058 039 000 Old_age Always - 42
195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always - 0
199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always - 29
241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 38615215765
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.Myn SSD bewarret it bedrach fan gegevens skreaun yn parameter 241 Total_LBAs_Written, yn logyske blokken (LBA) ynstee fan bytes. De grutte fan it logyske blok yn myn gefal is 512 bytes (it kin sjoen wurde yn 'e smartctl-útfier, yn Sektorgrutte). Om bytes te krijen, moatte jo de parameterwearde fermannichfâldigje mei 512.
38615215765 × 512 ÷ 1000 ÷ 1000 ÷ 1000 ÷ 1000 = 19,770 ТБ
38615215765 × 512 ÷ 1024 ÷ 1024 ÷ 1024 ÷ 1024 = 17,981 ТиБIt programma skdump op myn SSD besiket it de Total_LBAs_Written-wearde op ien of oare manier op syn eigen manier te ynterpretearjen, en dêrom toant it 1296217.695 TB, dat is fansels net korrekt.
Om de hoemannichte ynformaasje te finen op it apparaatnivo, sille wy it programma brûke btrace út it pakket blktrace. It toant sawol algemiene statistiken foar de heule tiid dat it programma rûn, as yndividuele prosessen en diskusjes (ynklusyf kernels) dy't de opname útfierden.
Rin it folgjende kommando út om ynformaasje yn 10 minuten te sammeljen, wêr't /dev/sdb jo skiif is:
# btrace -w 600 -a write /dev/sdbTypyske kommando útfier
…
8,16 0 3253 50.085433192 0 C WS 125424240 + 64 [0]
8,16 0 3254 50.085550024 0 C WS 193577744 + 64 [0]
8,16 0 3255 50.085685165 0 C WS 197246976 + 64 [0]
8,16 0 3256 50.085936852 0 C WS 125736264 + 128 [0]
8,16 0 3257 50.086060780 0 C WS 96261752 + 64 [0]
8,16 0 3258 50.086195031 0 C WS 94948640 + 64 [0]
8,16 0 3259 50.086327355 0 C WS 124656144 + 64 [0]
8,16 0 3260 50.086843733 15368 C WSM 310218496 + 32 [0]
8,16 0 3261 50.086975238 753 A WSM 310218368 + 32 <- (8,20) 291339904
8,16 0 3262 50.086975560 753 Q WSM 310218368 + 32 [dmcrypt_write/2]
8,16 0 3263 50.086977345 753 G WSM 310218368 + 32 [dmcrypt_write/2]
8,16 0 3264 50.086978072 753 I WSM 310218368 + 32 [dmcrypt_write/2]
8,16 0 3265 50.086979159 753 D WSM 310218368 + 32 [dmcrypt_write/2]
8,16 0 3266 50.087055685 0 C WSM 310218368 + 32 [0]
8,16 0 3267 50.087060168 753 A WSM 310218592 + 160 <- (8,20) 291340128
8,16 0 3268 50.087060367 753 Q WSM 310218592 + 160 [dmcrypt_write/2]
8,16 0 3269 50.087061242 753 G WSM 310218592 + 160 [dmcrypt_write/2]
8,16 0 3270 50.087061698 753 I WSM 310218592 + 160 [dmcrypt_write/2]
8,16 0 3271 50.087062361 753 D WSM 310218592 + 160 [dmcrypt_write/2]
8,16 0 3272 50.087386179 0 C WSM 310218592 + 160 [0]
8,16 0 3273 50.087436417 15368 A FWS 0 + 0 <- (253,1) 0
8,16 0 3274 50.087437471 15368 Q FWS [LS Thread]
8,16 0 3275 50.087440862 15368 G FWS [LS Thread]
8,16 0 3276 50.088300047 0 C WS 0 [0]
8,16 0 3277 50.088470917 753 A WFSM 18882688 + 8 <- (8,20) 4224
8,16 0 3278 50.088471091 753 Q WFSM 18882688 + 8 [dmcrypt_write/2]
8,16 0 3279 50.088471688 753 G WFSM 18882688 + 8 [dmcrypt_write/2]
8,16 0 3280 50.088474334 32254 D WSM 18882688 + 8 [kworker/0:2H]
8,16 0 3281 50.088515572 0 C WSM 18882688 + 8 [0]
8,16 0 3282 50.089229069 0 C WSM 18882688 [0]
CPU0 (8,16):
Reads Queued: 0, 0KiB Writes Queued: 345, 25,932KiB
Read Dispatches: 0, 0KiB Write Dispatches: 331, 25,788KiB
Reads Requeued: 0 Writes Requeued: 0
Reads Completed: 0, 0KiB Writes Completed: 1,597, 117,112KiB
Read Merges: 0, 0KiB Write Merges: 1, 16KiB
Read depth: 0 Write depth: 177
IO unplugs: 0 Timer unplugs: 0
CPU1 (8,16):
Reads Queued: 0, 0KiB Writes Queued: 502, 39,948KiB
Read Dispatches: 0, 0KiB Write Dispatches: 495, 40,076KiB
Reads Requeued: 0 Writes Requeued: 0
Reads Completed: 0, 0KiB Writes Completed: 0, 0KiB
Read Merges: 0, 0KiB Write Merges: 0, 0KiB
Read depth: 0 Write depth: 177
IO unplugs: 0 Timer unplugs: 0
CPU2 (8,16):
Reads Queued: 0, 0KiB Writes Queued: 297, 26,800KiB
Read Dispatches: 0, 0KiB Write Dispatches: 287, 26,800KiB
Reads Requeued: 0 Writes Requeued: 0
Reads Completed: 0, 0KiB Writes Completed: 0, 0KiB
Read Merges: 0, 0KiB Write Merges: 0, 0KiB
Read depth: 0 Write depth: 177
IO unplugs: 0 Timer unplugs: 0
CPU3 (8,16):
Reads Queued: 0, 0KiB Writes Queued: 418, 24,432KiB
Read Dispatches: 0, 0KiB Write Dispatches: 408, 24,448KiB
Reads Requeued: 0 Writes Requeued: 0
Reads Completed: 0, 0KiB Writes Completed: 0, 0KiB
Read Merges: 0, 0KiB Write Merges: 2, 272KiB
Read depth: 0 Write depth: 177
IO unplugs: 0 Timer unplugs: 0
Total (8,16):
Reads Queued: 0, 0KiB Writes Queued: 1,562, 117,112KiB
Read Dispatches: 0, 0KiB Write Dispatches: 1,521, 117,112KiB
Reads Requeued: 0 Writes Requeued: 0
Reads Completed: 0, 0KiB Writes Completed: 1,597, 117,112KiB
Read Merges: 0, 0KiB Write Merges: 3, 288KiB
IO unplugs: 0 Timer unplugs: 0
Throughput (R/W): 0KiB/s / 2,338KiB/s
Events (8,16): 9,287 entries
Skips: 0 forward (0 - 0.0%)
btrace kinne jo dúdlik sjen de werklike hoemannichte opnommen gegevens, mar it is lestich om te begripen hokker programma's opnimme út syn útfier.
It bepalen fan programma's dy't skriuwe nei it stasjon
It programma iotop sil de prosessen sjen litte dy't skriuwe nei de skiif en de grutte fan 'e skreaune gegevens.
De meast handige útfier wurdt levere troch de folgjende parameters:
# iotop -obPatSample programma útfier
02:55:47 Total DISK READ : 0.00 B/s | Total DISK WRITE : 30.65 K/s
02:55:47 Actual DISK READ: 0.00 B/s | Actual DISK WRITE: 0.00 B/s
TIME PID PRIO USER DISK READ DISK WRITE SWAPIN IO COMMAND
b'02:55:47 753 be/4 root 0.00 B 0.00 B 0.00 % 0.04 % [dmcrypt_write/2]'
b'02:55:47 788 be/4 root 72.00 K 18.27 M 0.00 % 0.02 % [btrfs-transacti]'
b'02:55:47 15057 be/4 valdikss 216.00 K 283.05 M 0.00 % 0.01 % firefox'
b'02:55:47 1588 ?dif root 0.00 B 0.00 B 0.00 % 0.00 % Xorg -nolisten tcp -auth /var/run/sddm/{398f030f-9667-4dff-b371-81eaae48dfdf} -background none -noreset -displayfd 18 -seat seat0 vt1'
b'02:55:47 15692 be/4 valdikss 988.00 K 9.41 M 0.00 % 0.00 % python3 /usr/bin/gajim'
b'02:55:47 15730 ?dif valdikss 9.07 M 0.00 B 0.00 % 0.00 % telegram-desktop --'
b'02:55:47 2174 ?dif valdikss 1840.00 K 2.47 M 0.00 % 0.00 % yakuake'
b'02:55:47 19827 be/4 root 16.00 K 896.00 K 0.00 % 0.00 % [kworker/u16:7-events_unbound]'
b'02:55:47 19074 be/4 root 16.00 K 480.00 K 0.00 % 0.00 % [kworker/u16:4-btrfs-endio-write]'
b'02:55:47 19006 be/4 root 16.00 K 1872.00 K 0.00 % 0.00 % [kworker/u16:1-events_unbound]'
b'02:55:47 1429 be/4 root 484.00 K 0.00 B 0.00 % 0.00 % accounts-daemon'
b'02:55:47 15820 be/4 valdikss 312.00 K 0.00 B 0.00 % 0.00 % firefox -contentproc -childID 6 -isForBrowser -prefsLen 7894 -prefMapSize 223880 -parentBuildID 20191022164834 -greomni /usr/lib64/firefox/omni.ja -appomni /usr/lib64/firefox/browser/omni.ja -appdir /usr/lib64/firefox/browser 15057 tab'
b'02:55:47 2125 ?dif valdikss 0.00 B 92.00 K 0.00 % 0.00 % plasmashell'
b'02:55:47 1268 be/3 root 0.00 B 4.00 K 0.00 % 0.00 % auditd'
b'02:55:47 1414 be/4 root 0.00 B 4.00 K 0.00 % 0.00 % sssd_nss --uid 0 --gid 0 --logger=files'
b'02:55:47 15238 be/4 valdikss 0.00 B 4.00 K 0.00 % 0.00 % thunderbird'
b'02:55:47 18605 be/4 root 0.00 B 3.19 M 0.00 % 0.00 % [kworker/u16:0-btrfs-endio-write]'
b'02:55:47 18867 be/4 root 0.00 B 96.00 K 0.00 % 0.00 % [kworker/u16:5-btrfs-endio-meta]'
b'02:55:47 19070 be/4 root 0.00 B 160.00 K 0.00 % 0.00 % [kworker/u16:2-btrfs-freespace-write]'
b'02:55:47 19645 be/4 root 0.00 B 2.17 M 0.00 % 0.00 % [kworker/u16:3-events_unbound]'
b'02:55:47 19982 be/4 root 0.00 B 496.00 K 0.00 % 0.00 % [kworker/u16:6-btrfs-endio-write]'Firefox falt jo each, registrearret 283 megabytes yn in pear minuten fan iotop-rinnen.
Bepale fan de triemmen dy't wurde skreaun nei
Ynformaasje oer it proses dat de skiif ferkrêftet is goed, mar de paden dêr't de opname wurdt makke is noch better.
Litte wy it programma brûke fatrace, dy't feroarings oan it bestânsysteem folget.
# fatrace -f WSample programma útfier
firefox(15057): CW /home/valdikss/.mozilla/firefox/xyf4vqh2.default/storage/default/moz-extension+++e5c304fb-af40-498a-9ba8-47eb0416e933^userContextId=4294967295/idb/3647222921wleabcEoxlt-eengsairo.sqlite-wal
firefox(15057): CW /home/valdikss/.mozilla/firefox/xyf4vqh2.default/storage/default/moz-extension+++e5c304fb-af40-498a-9ba8-47eb0416e933^userContextId=4294967295/idb/3647222921wleabcEoxlt-eengsairo.sqlite
firefox(15057): W /home/valdikss/.mozilla/firefox/xyf4vqh2.default/storage/default/https+++habr.com/ls/data.sqlite-journal
firefox(15057): W /home/valdikss/.mozilla/firefox/xyf4vqh2.default/storage/default/https+++habr.com/ls/data.sqlite-journal
firefox(15057): W /home/valdikss/.mozilla/firefox/xyf4vqh2.default/storage/default/https+++habr.com/ls/data.sqlite-journal
firefox(15057): W /home/valdikss/.mozilla/firefox/xyf4vqh2.default/storage/default/https+++habr.com/ls/data.sqlite-journal
firefox(15057): W /home/valdikss/.mozilla/firefox/xyf4vqh2.default/storage/default/https+++habr.com/ls/data.sqlite-journal
firefox(15057): W /home/valdikss/.mozilla/firefox/xyf4vqh2.default/storage/default/https+++habr.com/ls/data.sqlite-journal
firefox(15057): W /home/valdikss/.mozilla/firefox/xyf4vqh2.default/storage/default/https+++habr.com/ls/data.sqlite-journal
firefox(15057): CW /home/valdikss/.mozilla/firefox/xyf4vqh2.default/storage/default/https+++habr.com/ls/usage-journal
firefox(15057): W /home/valdikss/.mozilla/firefox/xyf4vqh2.default/storage/default/https+++habr.com/ls/usage
firefox(15057): CW /home/valdikss/.mozilla/firefox/xyf4vqh2.default/storage/default/https+++habr.com/ls/usage
firefox(15057): W /home/valdikss/.mozilla/firefox/xyf4vqh2.default/storage/default/https+++habr.com/ls/data.sqlite-journal
firefox(15057): W /home/valdikss/.mozilla/firefox/xyf4vqh2.default/storage/default/https+++habr.com/ls/data.sqlite
firefox(15057): W /home/valdikss/.mozilla/firefox/xyf4vqh2.default/storage/default/https+++habr.com/ls/data.sqlite
firefox(15057): W /home/valdikss/.mozilla/firefox/xyf4vqh2.default/storage/default/https+++habr.com/ls/data.sqlite
firefox(15057): W /home/valdikss/.mozilla/firefox/xyf4vqh2.default/webappsstore.sqlite-wal
firefox(15057): W /home/valdikss/.mozilla/firefox/xyf4vqh2.default/webappsstore.sqlite-wal
firefox(15057): W /home/valdikss/.mozilla/firefox/xyf4vqh2.default/webappsstore.sqlite-wal
firefox(15057): W /home/valdikss/.mozilla/firefox/xyf4vqh2.default/webappsstore.sqlite-wal
firefox(15057): W /home/valdikss/.mozilla/firefox/xyf4vqh2.default/webappsstore.sqlite-wal
firefox(15057): W /home/valdikss/.mozilla/firefox/xyf4vqh2.default/webappsstore.sqlite-wal
firefox(15057): W /home/valdikss/.mozilla/firefox/xyf4vqh2.default/webappsstore.sqlite-wal
firefox(15057): CW /home/valdikss/.mozilla/firefox/xyf4vqh2.default/storage/default/https+++habr.com/ls/data.sqlite-journal
firefox(15057): W /home/valdikss/.mozilla/firefox/xyf4vqh2.default/webappsstore.sqlite
firefox(15057): W /home/valdikss/.mozilla/firefox/xyf4vqh2.default/webappsstore.sqlite
firefox(15057): W /home/valdikss/.mozilla/firefox/xyf4vqh2.default/webappsstore.sqliteFatrace kin de hoemannichte gegevens dy't opnommen binne net sjen litte fanwegen it gebrûk fan in frij ienfâldige folgjen fan it feit dat bestannen tagong wurde fia inotify.
Fanút de útfier kinne jo sjen hoe't Habr myn artikel opslacht yn 'e lokale opslach fan' e browser wylst ik it skriuw, lykas ek de Group Speed Dial-útwreiding, dy't, lykas wy koenen ûntdekke mei fatrace, syn gegevens elke lêze 30 sekonden. It lêst, skriuwt net: CW foardat de triem seit dat de triem is iepene foar lêzen en skriuwen, mei simultane oanmeitsjen fan de triem as it ûntbrekt (neamd openat mei de O_RDWR|O_CREAT flagge), mar seit net dat alle ynformaasje is eins skreaun nei de triem.
Foar it gefal, om der wis fan te wêzen, litte wy strace brûke, mei in filter foar bestânsysteemoproppen:
strace -yy -e trace=open,openat,close,write -f -p 15057 2>&1 | grep extensionKommando útfier
[pid 20352] openat(AT_FDCWD, "/home/valdikss/.mozilla/firefox/xyf4vqh2.default/storage/default/moz-extension+++e5c304fb-af40-498a-9ba8-47eb0416e933^userContextId=4294967295/idb/3647222921wleabcEoxlt-eengsairo.sqlite", O_RDWR|O_CREAT|O_CLOEXEC, 0644) = 153</home/valdikss/.mozilla/firefox/xyf4vqh2.default/storage/default/moz-extension+++e5c304fb-af40-498a-9ba8-47eb0416e933^userContextId=4294967295/idb/3647222921wleabcEoxlt-eengsairo.sqlite>
[pid 20352] read(153</home/valdikss/.mozilla/firefox/xyf4vqh2.default/storage/default/moz-extension+++e5c304fb-af40-498a-9ba8-47eb0416e933^userContextId=4294967295/idb/3647222921wleabcEoxlt-eengsairo.sqlite>, "SQLite format 3 20 22 @ d 23"..., 100) = 100
[pid 20352] read(153</home/valdikss/.mozilla/firefox/xyf4vqh2.default/storage/default/moz-extension+++e5c304fb-af40-498a-9ba8-47eb0416e933^userContextId=4294967295/idb/3647222921wleabcEoxlt-eengsairo.sqlite>, "SQLite format 3 20 22 @ d 23"..., 4096) = 4096
[pid 20352] openat(AT_FDCWD, "/home/valdikss/.mozilla/firefox/xyf4vqh2.default/storage/default/moz-extension+++e5c304fb-af40-498a-9ba8-47eb0416e933^userContextId=4294967295/idb/3647222921wleabcEoxlt-eengsairo.sqlite-wal", O_RDWR|O_CREAT|O_CLOEXEC, 0644) = 166</home/valdikss/.mozilla/firefox/xyf4vqh2.default/storage/default/moz-extension+++e5c304fb-af40-498a-9ba8-47eb0416e933^userContextId=4294967295/idb/3647222921wleabcEoxlt-eengsairo.sqlite-wal>
…
[pid 20352] read(54</home/valdikss/.mozilla/firefox/xyf4vqh2.default/storage/default/moz-extension+++e5c304fb-af40-498a-9ba8-47eb0416e933^userContextId=4294967295/idb/3647222921wleabcEoxlt-eengsairo.sqlite>, " r4304364354354364- 4204!4'414" 250 &"..., 4096) = 4096
[pid 20352] read(54</home/valdikss/.mozilla/firefox/xyf4vqh2.default/storage/default/moz-extension+++e5c304fb-af40-498a-9ba8-47eb0416e933^userContextId=4294967295/idb/3647222921wleabcEoxlt-eengsairo.sqlite>, " 136Pt2262504 O24532016:"16.27 r245306>2461t1q370"..., 4096) = 4096
[pid 20352] close(77</home/valdikss/.mozilla/firefox/xyf4vqh2.default/storage/default/moz-extension+++e5c304fb-af40-498a-9ba8-47eb0416e933^userContextId=4294967295/idb/3647222921wleabcEoxlt-eengsairo.sqlite-wal>) = 0
[pid 20352] close(54</home/valdikss/.mozilla/firefox/xyf4vqh2.default/storage/default/moz-extension+++e5c304fb-af40-498a-9ba8-47eb0416e933^userContextId=4294967295/idb/3647222921wleabcEoxlt-eengsairo.sqlite>) = 0
Der is gjin oprop write(), wat oanjout dat der gjin yngong is yn it bestân.
Bepale triemsysteem Overhead
Grut ferskil yn lêzingen iotop и btrace joech my it idee om te testen it bestân systeem troch in hân skriuwen gegevens nei in triem en tafersjoch op btrace lêzingen.
As jo it skriuwen nei skiif folslein útslute troch te booten yn systemd needmodus en manuell skriuwe in pear bytes gegevens nei in besteande triem, btrace nei SSD fan btrfs meldt opname 3 megabyte echte gegevens. In nij oanmakke triemsysteem op in 8 GB flash drive skriuwt in minimum fan 264 KiB by it skriuwen fan ien byte.
Foar fergeliking, it skriuwen fan in pear bytes nei in bestân op ext4 einiget mei it skriuwen fan 24 kilobytes oan gegevens op skiif.
Yn 2017, Jayashree Mohan, Rohan Kadekodi en Vijay Chidambaram , harren resultaten foar btrfs en ext4 by 4KB skriuwt binne konsekwint mei mines.
Konklúzje en konklúzje
Troch de beskreaune manipulaasjes waard it ûntdutsen:
- Faak logging fan printertaakstaten troch de CUPS-printdaemon nei /var/lytsûnthâld/beker elke minút. It probleem waard repareare troch /var/ te wiskjenspoel/cups (hoewol't der gjin printwurken wiene);
- It feit dat de databank elke 30 sekonden wurdt lêzen troch de Group Speed Dial-útwreiding foar Firefox;
- Periodyk logging troch ferskate tsjinsten foar folgjen fan prestaasjes yn Fedora, wat resulteart yn ferskate megabytes fan gegevens wurde skreaun nei btrfs: pmcd.service, pmie.service, pmlogger.service;
- Enorme fersterking by it skriuwen fan in lytse hoemannichte gegevens mei btrfs.
Konklúzje: jo moatte gjin btrfs brûke as programma's faak in lytse hoemannichte gegevens skriuwe (in pear kilobytes), oars sil it resultearje yn megabytes oan skreaune gegevens. Dit is benammen wier foar kompjûters mei ien board mei OS op MicroSD.
Boarne: www.habr.com