Horizon EDA 1.1 tsarin sarrafa kayan lantarki yana samuwa

ya faru saki tsarin don sarrafa ƙirar na'urorin lantarki Horizon EDA 1.1 (EDA - Electronic Design Automation), wanda aka inganta don ƙirƙirar da'irori na lantarki da allon da'irar buga. Ra'ayoyin da aka haɗa a cikin aikin suna tasowa tun daga 2016, kuma an ba da shawarar fitowar gwaji na farko a faɗuwar ƙarshe. Dalilin ƙirƙirar Horizon da aka ambata sha'awar samar da kusanci tsakanin laburaren abubuwa da sassan lissafin kayan aikin gudanarwa da musaya don zayyana da'irori da allon allo, gami da ba da damar raba daidaitattun sassan sassa a cikin ayyuka daban-daban da haɗin kai ta UUID. An rubuta lambar a C++ da rarraba ta mai lasisi a ƙarƙashin GPLv3.

Main Features
Horizon EDA:

• Cikakken aikin ƙirar ƙira, rufe matakai daga zana zane don fitar da samfurin da aka gama a cikin Gerber (RS-274X) da NC-Drill Formats;
• Ayyukan aiki don sarrafa ɗakin karatu na abubuwa;
  

• Editan haɗin kai don kowane sassa, daga alamomi zuwa allon kewayawa;
  

• Editan tsari, la'akari da jerin hanyoyin haɗin lantarki (netlist) da haɗin abubuwa;
  

• Na'ura mai ba da hanya tsakanin hanyoyin sadarwa wacce aka samo asali don KiCad;
  

• 3D tsarin ma'auni wanda ke aiki ba tare da kayan tarihi ba kuma ba tare da jinkiri ba;
  

• Ability don saukewa da ƙirƙirar samfuran 3D na abubuwan haɗin gwiwa tare da goyan baya don fitar da samfuran zuwa CAD a cikin tsarin MATSAYI;
  

• Yiwuwar haɗa kwafi da yawa na allo ɗaya ko sanya alluna da yawa akan kwamiti ɗaya don adana kuɗi lokacin yin odar ƙananan alluna;
  

• Multi-threaded kayan aiki don duba yarda da zane dokokin (DRC, Design Doka Dubawa), wanda ba ka damar gane na kowa kurakurai a lokacin da zayyana buga da'irar hukumar;
  

• Taya mai hulɗa da mai inganta waƙa;
  

• Tsarin bincike na parametric;
  

• Interface don samun bayanai game da farashin sassa (dangane da kitspace partinfo);
  

• Ikon kewayawa ta amfani da alamun allo akan tsarin tare da allon taɓawa da keɓance mahaɗin (alal misali, zaku iya zaɓar tsarin launi don dacewa da dandano);
• Taimako don shigo da hotuna a cikin tsarin DXF;
• Interface don fitarwa Bill of Materials (BOM) da Pick&place; umarni.
• Haɗin duk abubuwan haɗin gwiwa, tubalan da sassa ta amfani da UUID;
• Taimako don jujjuya sauye-sauye (Undo / Redo) da abubuwan motsi ta hanyar allo;
• Yiwuwar ginawa don Linux da Windows;
• Tsarin faifai na tushen JSON;
• GTK3 tushen dubawa (Gtkm3);
• Yin amfani da OpenGL 3 don hanzarta yin aiki.

source: budenet.ru