Izgradnja stražara i njegovih ovisnosti u rpm. Instaliranje stražara iz rpm-a, osnovno podešavanje

Opis

Dežurni — alat za praćenje iznimaka i pogrešaka u vašim aplikacijama.

Glavne značajke:

• lako se integrira u projekt,
• hvata pogreške i u korisnikovom pregledniku i na vašem poslužitelju.
• Besplatno,
• Popis grešaka ažurira se u stvarnom vremenu,
• Ako je pogreška označena kao riješena i ponovno se pojavi, tada se ponovno stvara i uzima u obzir u zasebnoj niti,
• Pogreške su grupirane i prikazane prema učestalosti pojavljivanja,
• Pogreške se mogu filtrirati prema statusu, izvoru zapisivanja, razini zapisivanja, nazivu poslužitelja itd.

Usporedba s ELK zapisnicima: Najvažnije je da je u ELK-u svaki novi dnevnik iste vrste zaseban unos. a u sentry-u, svaka nova iznimka iste vrste je samo + 1 u odnosu na broj svog zapisa

Sentry podržava većinu programskih jezika. Više detalja здесь.

Pokretanje Sentryja s dockerom i docker-composeom

Možete pokrenuti Sentry koristeći docker i docker-compose kako je ovdje opisano: https://github.com/getsentry/onpremise. Ali skripta pokreće dodatne usluge na istom poslužitelju u pojedinačnom načinu rada (bez tolerancije na pogreške) (za verziju sentry 10.0.0):

• datum
• postgres
• redis
• čuvar zoo vrta
• Kafka
• klikanica
• simbolikator

Ako vam je potrebna tolerancija na pogreške, morat ćete koristiti planove proizvoda u oblaku ili instalirati Sentry bez ove skripte.

Ovaj post opisuje proces izgradnje Sentryja i njegovih ovisnosti u rpm. Ako trebate instalirati Sentry tamo gdje nema interneta, onda možete napraviti yum repozitorij iz primljenih rpm-ova.

Važna pojašnjenja o sastavljanju i instaliranju paketa

Neki paketi ovise jedan o drugom. Stoga je proces montaže i instalacije podijeljen u nekoliko faza.

NAPRAVITI:

Ovaj post pokriva izgradnju i instaliranje Sentry verzije 9.1.2. Nakon što programeri izdaju nekoliko manjih izdanja, možete izgraditi verziju Sentry 10.X.Y. Mnoga od najnovijih obveza za svladavanje su popravci.

Zahtjevi poslužitelja za izgradnju rpm

Što je više CPU-a, to će se brže izgraditi semafor i simbolički paketi

Isključite Selinux

Zajednica će biti za samo ako netko napiše pravila za selinux za Sentry.

sudo sed -i s/^SELINUX=.*$/SELINUX=disabled/ /etc/selinux/config
sudo reboot

Povezivanje repozitorija epel-release

sudo yum install -y epel-release git

Sakupljamo ovisnosti u rpm pip i instaliramo ih. Datoteka 1general_dependencies.sh

echo "Install dependencies"
sudo yum install -y cargo gcc gcc-c++ libffi-devel libjpeg-devel libxml2-devel 
libxslt libxslt-devel make mc openssl-devel python-devel memcached 
python-lxml python-nose python2-pip python34 rpm-build rpmdevtools 
ruby-devel rubygems zlib-devel redis xmlsec1-openssl xmlsec1 
libtool-ltdl-devel xmlsec1-devel xmlsec1-openssl-devel openldap-devel

echo "Build common pip dependencies to rpm by fpm"
gem install --no-document fpm
echo "For chardet==3.0.2 need setuptools>=12"
echo "For cryptography==2.8 need setuptools>=18.5"
fpm -s python -t rpm setuptools==18.5
sudo yum install -y python-setuptools-18.5-1.noarch.rpm
fpm -s python -t rpm --name python2-pip pip==20.0.2
sudo yum install -y python2-pip-20.0.2-1.noarch.rpm

Instalirajte i pokrenite PostgreSQL 9.6 za izgradnju python-psycopg2-binary. Datoteka 2psycopg2-binary.sh

Možete promijeniti verziju PostgreSQL-a u skripti.

sudo yum install -y postgresql-devel
fpm -s python -t rpm psycopg2-binary==2.7.7
sudo yum install -y python-psycopg2-binary-2.7.7-1.x86_64.rpm
sudo yum remove -y postgresql-devel postgresql postgresql-libs

Kompajlirajte i instalirajte python-dateutil rpm. Datoteka 3dateutil.sh

#!/bin/bash

echo "Build and install python-dateutil rpm"
mkdir -p ~/rpmbuild/{BUILD,RPMS,SOURCES,SRPMS,SPECS}
spectool -g -R spec/python-dateutil.spec
wget https://raw.githubusercontent.com/patsevanton/sentry-rpm/master/spec/python-dateutil-system-zoneinfo.patch -P ~/rpmbuild/SOURCES
wget https://raw.githubusercontent.com/patsevanton/sentry-rpm/master/spec/python-dateutil-timelex-string.patch -P ~/rpmbuild/SOURCES
rpmbuild --bb spec/python-dateutil.spec
sudo yum install -y ~/rpmbuild/RPMS/noarch/python-dateutil-2.4.2-1.el7.noarch.rpm

Kompajlirajte i instalirajte python-urllib3 rpm. Datoteka 4urllib3.sh

Naslov spojlera

echo "Build pip dependencies to rpm by fpm for urllib3"
fpm -s python -t rpm pycparser==2.19
sudo yum install -y python-pycparser-2.19-1.noarch.rpm
fpm -s python -t rpm cffi==1.14.0
sudo yum install -y python-cffi-1.14.0-1.x86_64.rpm
fpm -s python -t rpm cryptography==2.8
sudo yum install -y python-cryptography-2.8-1.x86_64.rpm
fpm -s python -t rpm idna==2.7
sudo yum install -y python-idna-2.7-1.noarch.rpm
sudo chmod +r /usr/lib/python2.7/site-packages/idna-2.7-py2.7.egg-info/PKG-INFO
fpm -s python -t rpm pyOpenSSL==19.1.0
sudo yum install -y python-pyopenssl-19.1.0-1.noarch.rpm
fpm -s python -t rpm pbr==5.4.4
sudo yum install -y python-pbr-5.4.4-1.noarch.rpm
fpm -s python -t rpm mock==2.0.0
sudo yum install -y python-mock-2.0.0-1.noarch.rpm
fpm -s python -t rpm py==1.8.1
sudo yum install -y python-py-1.8.1-1.noarch.rpm
fpm -s python -t rpm six==1.10.0
sudo yum install -y python-six-1.10.0-1.noarch.rpm
fpm -s python -t rpm pluggy==0.6.0
sudo yum install -y python-pluggy-0.6.0-1.noarch.rpm
fpm -s python -t rpm attrs==19.3.0
sudo yum install -y python-attrs-19.3.0-1.noarch.rpm
fpm -s python -t rpm more-itertools==5.0.0
sudo yum install -y python-more-itertools-5.0.0-1.noarch.rpm
fpm -s python -t rpm pytest==3.5.1
sudo yum install -y python-pytest-3.5.1-1.noarch.rpm

echo "Build urllib rpm"
spectool -g -R spec/urllib3-1.24.2.spec
sudo yum-builddep -y spec/urllib3-1.24.2.spec
rpmbuild --bb spec/urllib3-1.24.2.spec
sudo yum install -y ~/rpmbuild/RPMS/noarch/python-urllib3-1.24.2-1.el7.noarch.rpm

Sakupljamo preostale pip ovisnosti u rpm i instaliramo ih. Datoteka 5other_dependencies.sh

Naslov spojlera

echo "Build rpm by fpm"
fpm -s python -t rpm jmespath==0.9.5
sudo yum install -y python-jmespath-0.9.5-1.noarch.rpm
fpm -s python -t rpm amqp==1.4.9
sudo yum install -y python-amqp-1.4.9-1.noarch.rpm
fpm -s python -t rpm anyjson==0.3.3
sudo yum install -y python-anyjson-0.3.3-1.noarch.rpm
fpm -s python -t rpm billiard==3.3.0.23
sudo yum install -y python-billiard-3.3.0.23-1.x86_64.rpm
fpm -s python -t rpm docutils==0.16
sudo yum install -y python-docutils-0.16-1.noarch.rpm
fpm -s python -t rpm Pillow==4.2.1
sudo yum install -y python-pillow-4.2.1-1.x86_64.rpm
fpm -s python -t rpm botocore==1.5.70
sudo yum install -y python-botocore-1.5.70-1.noarch.rpm
fpm -s python -t rpm boto3==1.4.5
sudo yum install -y python-boto3-1.4.5-1.noarch.rpm
fpm -s python -t rpm chardet==3.0.2
sudo yum install -y python-chardet-3.0.2-1.noarch.rpm
fpm -s python -t rpm croniter==0.3.31
sudo yum install -y python-croniter-0.3.31-1.noarch.rpm
fpm -s python -t rpm cssselect==1.1.0
sudo yum install -y python-cssselect-1.1.0-1.noarch.rpm
fpm -s python -t rpm cssutils==0.9.10
sudo yum install -y python-cssutils-0.9.10-1.noarch.rpm
fpm -s python -t rpm django-crispy-forms==1.4.0
sudo yum install -y python-django-crispy-forms-1.4.0-1.noarch.rpm
fpm -s python -t rpm django-jsonfield==0.9.13
sudo yum install -y python-django-jsonfield-0.9.13-1.noarch.rpm
fpm -s python -t rpm django-picklefield==0.3.2
sudo yum install -y python-django-picklefield-0.3.2-1.noarch.rpm
fpm -s python -t rpm django-sudo==2.1.0
sudo yum install -y python-django-sudo-2.1.0-1.noarch.rpm
fpm -s python -t rpm django-templatetag-sugar==1.0
sudo yum install -y python-django-templatetag-sugar-1.0-1.noarch.rpm
fpm -s python -t rpm djangorestframework==2.4.8
sudo yum install -y python-djangorestframework-2.4.8-1.noarch.rpm
fpm -s python -t rpm email-reply-parser==0.2.0
sudo yum install -y python-email_reply_parser-0.2.0-1.noarch.rpm
fpm -s python -t rpm enum34==1.1.9
sudo yum install -y python-enum34-1.1.9-1.noarch.rpm
fpm -s python -t rpm functools32==3.2.3.post2
sudo yum install -y python-functools32-3.2.3_2-1.noarch.rpm
fpm -s python -t rpm futures==3.3.0
sudo yum install -y python-futures-3.3.0-1.noarch.rpm
fpm -s python -t rpm hiredis==0.1.6
sudo yum install -y python-hiredis-0.1.6-1.x86_64.rpm
fpm -s python -t rpm honcho==1.0.1
sudo yum install -y python-honcho-1.0.1-1.noarch.rpm
fpm -s python -t rpm httplib2==0.17.0
sudo yum install -y python-httplib2-0.17.0-1.noarch.rpm
fpm -s python -t rpm jsonschema==2.6.0
sudo yum install -y python-jsonschema-2.6.0-1.noarch.rpm
fpm -s python -t rpm kombu==3.0.35
sudo yum install -y python-kombu-3.0.35-1.noarch.rpm
fpm -s python -t rpm celery==3.1.18
sudo yum install -y python-celery-3.1.18-1.noarch.rpm
fpm -s python -t rpm loremipsum==1.0.5
sudo yum install -y python-loremipsum-1.0.5-1.noarch.rpm
fpm -s python -t rpm lxml==4.5.0
sudo yum install -y python-lxml-4.5.0-1.x86_64.rpm
fpm -s python -t rpm milksnake==0.1.5
sudo yum install -y python-milksnake-0.1.5-1.noarch.rpm
fpm -s python -t rpm mistune==0.8.4
sudo yum install -y python-mistune-0.8.4-1.noarch.rpm
fpm -s python -t rpm mmh3==2.3.1
sudo yum install -y python-mmh3-2.3.1-1.x86_64.rpm
fpm -s python -t rpm exam==0.10.6
sudo yum install -y python-exam-0.10.6-1.noarch.rpm
fpm -s python -t rpm msgpack==0.6.2
sudo yum install -y python-msgpack-0.6.2-1.x86_64.rpm
fpm -s python -t rpm oauth2==1.9.0.post1
sudo yum install -y python-oauth2-1.9.0.post1-1.noarch.rpm
fpm -s python -t rpm oauthlib==3.1.0
sudo yum install -y python-oauthlib-3.1.0-1.noarch.rpm
fpm -s python -t rpm parsimonious==0.8.0
sudo yum install -y python-parsimonious-0.8.0-1.noarch.rpm
fpm -s python -t rpm requests==2.20.1
sudo yum install -y python-requests-2.20.1-1.noarch.rpm
fpm -s python -t rpm petname==2.0
sudo yum install -y python-petname-2.0-1.noarch.rpm
fpm -s python -t rpm python-utils==2.3.0
sudo yum install -y python-utils-2.3.0-1.noarch.rpm
fpm -s python -t rpm progressbar2==3.10.1
sudo yum install -y python-progressbar2-3.10.1-1.noarch.rpm
fpm -s python -t rpm pytest-django==2.9.1
sudo yum install -y python-pytest-django-2.9.1-1.noarch.rpm
fpm -s python -t rpm pytest-html==1.9.0
sudo yum install -y python-pytest-html-1.9.0-1.noarch.rpm
fpm -s python -t rpm python-memcached==1.59
sudo yum install -y python-memcached-1.59-1.noarch.rpm
fpm -s python -t rpm python-openid==2.2.5
sudo yum install -y python-openid-2.2.5-1.noarch.rpm
fpm -s python -t rpm python-u2flib-server==4.0.1
sudo yum install -y python-u2flib-server-4.0.1-1.noarch.rpm
fpm -s python -t rpm qrcode==5.3
sudo yum install -y python-qrcode-5.3-1.noarch.rpm
fpm -s python -t rpm querystring-parser==1.2.4
sudo yum install -y python-querystring_parser-1.2.4-1.noarch.rpm
fpm -s python -t rpm redis==2.10.5
sudo yum install -y python-redis-2.10.5-1.noarch.rpm
fpm -s python -t rpm rb==1.7
sudo yum install -y python-rb-1.7-1.noarch.rpm
fpm -s python -t rpm redis-py-cluster==1.3.4
sudo yum install -y python-redis-py-cluster-1.3.4-1.noarch.rpm
fpm -s python -t rpm requests-oauthlib==0.3.3
sudo yum install -y python-requests-oauthlib-0.3.3-1.noarch.rpm
fpm -s python -t rpm percy==2.0.2
sudo yum install -y python-percy-2.0.2-1.noarch.rpm
fpm -s python -t rpm selenium==3.141.0
sudo yum install -y python-selenium-3.141.0-1.noarch.rpm
fpm -s python -t rpm semaphore==0.4.65
sudo yum install -y python-semaphore-0.4.65-1.x86_64.rpm
fpm -s python -t rpm sentry-sdk==0.14.1
sudo yum install -y python-sentry-sdk-0.14.1-1.noarch.rpm
fpm -s python -t rpm setproctitle==1.1.10
sudo yum install -y python-setproctitle-1.1.10-1.x86_64.rpm
fpm -s python -t rpm simplejson==3.8.2
sudo yum install -y python-simplejson-3.8.2-1.x86_64.rpm
fpm -s python -t rpm sqlparse==0.1.19
sudo yum install -y python-sqlparse-0.1.19-1.noarch.rpm
fpm -s python -t rpm statsd==3.1
sudo yum install -y python-statsd-3.1-1.noarch.rpm
fpm -s python -t rpm strict-rfc3339==0.7
sudo yum install -y python-strict-rfc3339-0.7-1.noarch.rpm
fpm -s python -t rpm structlog==16.1.0
sudo yum install -y python-structlog-16.1.0-1.noarch.rpm
fpm -s python -t rpm symbolic==6.1.4
sudo yum install -y python-symbolic-6.1.4-1.x86_64.rpm
fpm -s python -t rpm toronado==0.0.11
sudo yum install -y python-toronado-0.0.11-1.noarch.rpm
fpm -s python -t rpm ua-parser==0.7.3
sudo yum install -y python-ua-parser-0.7.3-1.noarch.rpm
fpm -s python -t rpm uwsgi==2.0.18
sudo yum install -y python-uwsgi-2.0.18-1.noarch.rpm
fpm -s python -t rpm -n PyYAML pyyaml==3.11
sudo yum install -y PyYAML-3.11-1.x86_64.rpm
fpm -s python -t rpm django-auth-ldap==1.2.17
sudo yum install -y python-django-auth-ldap-1.2.17-1.noarch.rpm

Prevodimo u rpm sentry i instaliramo ga. Datoteka 6sentry.sh

echo "Install nodejs and yarn"
curl -sL https://rpm.nodesource.com/setup_10.x | sudo bash -
sudo yum install -y nodejs
sudo sed -e '/nodesource-source/,+6d' -i /etc/yum.repos.d/nodesource-el7.repo
curl -sL https://dl.yarnpkg.com/rpm/yarn.repo | sudo tee /etc/yum.repos.d/yarn.repo
sudo yum install -y yarn

cp spec/config.yml spec/sentry.conf.py ~/rpmbuild/SOURCES
cp spec/sentry-cron.service spec/sentry-web.service spec/sentry-worker.service ~/rpmbuild/SOURCES
spectool -g spec/sentry-9.1.2.spec
sudo yum-builddep -y spec/sentry-9.1.2.spec
rpmbuild -bb spec/sentry-9.1.2.spec
sudo yum install -y ~/rpmbuild/RPMS/noarch/python-sentry-9.1.2-1.el7.noarch.rpm

Instaliranje sentry rpm-a s ovisnostima o drugom poslužitelju

Isključite Selinux

sudo sed -i s/^SELINUX=.*$/SELINUX=disabled/ /etc/selinux/config
#### sudo reboot

Povezivanje repozitorija epel-release

sudo yum install -y epel-release git libjpeg-turbo redis
sudo systemctl start redis

Instalirajte i pokrenite PostgreSQL 9.6. Datoteka 7postgresql.sh

sudo yum install -y https://download.postgresql.org/pub/repos/yum/reporpms/EL-7-x86_64/pgdg-redhat-repo-latest.noarch.rpm
sudo yum install -y postgresql96 postgresql96-server postgresql96-contrib
sudo /usr/pgsql-9.6/bin/postgresql96-setup initdb
sudo systemctl start postgresql-9.6
sudo -i -u postgres psql -c "create user sentry with password 'password';"
sudo -i -u postgres psql -c "create database sentry with owner sentry;"
sudo -i -u postgres psql -c "alter role sentry superuser;"

# TODO: Проверить без прав superuser для роли sentry
#sudo -i -u postgres psql -c "alter role sentry nosuperuser;"
#sudo -i -u postgres psql -c "CREATE SCHEMA main AUTHORIZATION sentry;"

Pokrećemo migraciju (izrada sheme baze podataka) i pokrećemo usluge. Datoteka 8start_sentry.sh

sudo systemctl start redis
sudo -i -u sentry /usr/bin/sentry --config /etc/sentry/ upgrade
sudo systemctl start sentry-worker
sudo systemctl start sentry-cron
sudo systemctl start sentry-web

Stvaranje internog Sentry administratora

https://forum.sentry.io/t/noninteractive-first-time-setup-of-user-via-upgrade/164

sudo -i -u sentry /usr/bin/sentry --config /etc/sentry/ createuser 

Izgradnja stražara u rpm, instalacija, konfiguracija za lijene

Isključite Selinux

sudo sed -i s/^SELINUX=.*$/SELINUX=disabled/ /etc/selinux/config
sudo reboot

Pokrenite skripte za izradu i instalaciju stražara

sudo yum install -y epel-release git
git clone https://github.com/patsevanton/sentry-rpm.git
cd sentry-rpm
./1general_dependencies.sh
./2psycopg2-binary.sh
./3dateutil.sh
./4urllib3.sh
./5other_dependencies.sh
./6sentry.sh
Копируем rpm из rpmbuild/RPMS и корня sentry-rpm на целевой сервер. Создаем yum репо. Устанавливаем все собранные rpm пакеты.
./7postgresql.sh
./8start_sentry.sh

Stvaranje internog Sentry administratora

https://forum.sentry.io/t/noninteractive-first-time-setup-of-user-via-upgrade/164

sudo -i -u sentry /usr/bin/sentry --config /etc/sentry/ createuser 

Testiranje slanja iznimke

Testirat ćemo ga na java projektu. Preuzmite Javu i Maven.

sudo yum install -y java-1.8.0-openjdk-devel git
sudo wget http://repos.fedorapeople.org/repos/dchen/apache-maven/epel-apache-maven.repo -O /etc/yum.repos.d/epel-apache-maven.repo
sudo yum -y install apache-maven
git clone https://github.com/getsentry/examples.git
cd examples/java/basic
mvn compile exec:java

Sada moramo pokrenuti Javu prosljeđujući joj SENTRY_DSN

SENTRY_DSN=https://public:private@host:port/1 mvn exec:java

Sada moramo pronaći zadani generirani SENTRY_DSN.

Idemo u Sentry. Idemo na zadani projekt internal.

ili

Idemo na postavke projekta.

Idite na Ključevi klijenta (DSN).

Kopirajte DSN. Ovdje SENTRY_DSN.

S ovim parametrom pokrećemo Javu.

SENTRY_DSN=http://[email protected]:9000/1 mvn exec:java

Vidimo ovu sliku.

Ako odemo na UnsupportedOperationException, tada ćemo vidjeti proširene informacije.

Kreirao je Telegram chat koristeći Sentry

https://t.me/sentry_ru

U sljedećim epizodama:

• Testirajte LDAP. Scenarij je već pripremljen 9sentry-ldap-auth.sh
• Testirajte sentry verziju 10.0.X nakon što se pojavi nekoliko manjih izdanja.

Repozitorij sa skriptama:

https://github.com/patsevanton/sentry-rpm

Izvor: www.habr.com