🥇Estasyon travay kriptografik ki baze sou estanda kle piblik pou platfòm Android

Li lè yo montre kouman yon estasyon kriptografik ki baze sou estanda kle piblik yo cryptoarmpkcs travay sou youn nan platfòm mobil yo, sètadi Android.

Konsèp la ki te mete desann lè yo devlope sèvis piblik cryptoarmpkcs la se ke itilizatè a ta dwe fè eksperyans yon minimòm de deranjman lè kreye ak verifye yon siyati elektwonik. Se poutèt sa nou pwopoze itilize siy kriptografik kòm yon konpayi asirans kle pou yon sètifika pèsonèl PKCS#11 ak/oswa veso ki an sekirite PKCS#12. Li dwe di ke itilize nan PKCS # 12 nan anpil ka vire soti nan prèske sèlman posib, pou egzanp, lè menm siy PKCS # 11 yo pa gen sipò pou sèten platfòm. Se konsa, nou deside kòmanse pò sèvis piblik cryptoarmpkcs nan platfòm Android ak sipò pou PKCS#12 veso ki an sekirite.

Se pou nou imedyatman sonje ke depi pwojè a te fè sou platfòm la C ak Tcl / Tk, pòtaj la pa t 'koze okenn difikilte fondamantal. Sa a te posib gras a teknoloji Androwish. Avèk dewoulman ak mete kanpe anviwònman an Pa te gen okenn pwoblèm (anviwònman travay mwen an se Linux - Mageia-7.0). Mwen pral bay yon sèl script pou deplwaye Zouti Liy Kòmand Android (sdk-tools-linux-xxxx.zip):

#!/bin/sh
if [ $# -ne 1   ]
    then 
	echo "./InstallAndroidSDK.sh <sdk-tools-linux-xxxxxxxx.zip>"
	echo "Не указан архив или число параметров больше 1"
	exit 1
fi
if [ ! -f $1 ]
    then 
	echo "./InstallAndroidSDK.sh <sdk-tools-linux-xxxxxxxx.zip>"
	echo "архив $1 отсутствует"
	exit 1
fi
#Распаковываем SDK-TOOLS в папку tools
#unzip sdk-tools-linux-4333796.zip
unzip $1
#Создаем папку android-sdk-linux
mkdir android-sdk-linux
#Перемещвем папку tools в android-sdk-linux
mv tools android-sdk-linux
cd android-sdk-linux/tools/bin
./sdkmanager "platform-tools" "platforms;android-29"

Bagay ki pi remakab se ke anviwònman an Androwish gen ladann de entèprèt, undrowish-xxx ak vanillawish-xxx, ki konplètman idantik nan konpozisyon "balalaikas" (pake) ki enkli nan Androwish tèt li. Diferans ki genyen ant undrowish ak vanillawish se ke vanillawish gen yon backend ki baze sou SDL/AGG/freetype:

Prezans nan de sèvis piblik sa yo pèmèt ou devlope yon aplikasyon san yo pa itilize Android tèt li ak Emulation li yo ak apwoksimasyon maksimòm nan yon aparèy reyèl. Premye a tout, sa a se, nan kou, undroidwish-xxx.

Pake koutim aktyèl la pou android bati nan anviwònman an AWSDK. Pye bwa pwojè ou a ta dwe deplase nan katab ~/AWSDK/assets/app. Nan ka sa a, modil prensipal pwojè ou a dwe chanje non main.tcl. Si ou itilize plis balalaikas ak bibliyotèk dinamik, Lè sa a, bibliyotèk yo dwe mete nan katab ~/AWSDK/libs/x86 pou Emulation la ak ~/AWSDK/libs/armeabi pou aparèy reyèl la.

Apre sa, jis kouri lòd la:

$wish ~/AWSDK/tools/bones

epi swiv enstriksyon li yo:

Pake apk reyini yo pral lokalize nan katab ~/AWSDK/build/outputs/apk.

Si ou gen yon aparèy reyèl oswa yon Emulation konekte, pake a ka enstale imedyatman.
Nan ka sa a, aparèy reyèl la dwe nan mòd debug.

Men, ann tounen nan aplikasyon an li menm. Ki sa ki te dwe chanje nan li?

Natirèlman, chanjman yo se sitou ki gen rapò ak gwosè ekran an. Mwen te oblije redesign prensipal la (kòmanse fenèt). Kòm yon rezilta, olye de yon fenèt sou yon òdinatè regilye:

Twa fenèt parèt sou android:

Premye fenèt la se enfòmasyon. Konvansyonèl, li divize an plizyè pati. Premye pati a, ki sitiye nan tèt la, gen non an nan sèvis piblik la ak logo li yo.

Apre vini logo manifakti a, fèy enfòmasyon ak twa bouton ranpli paj la.
Paj la ekri lè l sèvi avèk eleman twal la. Paj la sèvi ak de kalite bouton: youn nan fòm yon rektang translusid (midwayen), ak lòt de yo nan fòm lan nan yon rektang ak kwen awondi. Yon balalaika te itilize pou kreye bouton ak kwen awondi tkpath. Pèsonèlman, balalaika sa a te fè yon trè bon enpresyon sou mwen. Natirèlman, lè w ap travay ak twal, jeyometri pran pati lyon an nan kòd la. Anba a se script create_titul_page.tcl pou kreye premye paj aplikasyon an. Nenpòt moun ka modifye li pou adapte pwòp vizyon yo.

Script create_titul_page.tcl

package require Tk
package require tkpath 0.3.0
global mydir
set mydir [file dirname [info script]]
#Грузим картинки
#Логотип продукта
image create photo logo_product -file [file join $mydir "imageme" "validcertkey_51x24.png"] 
#Логотип производителя
image create photo logo_orel -file [file join $mydir "imageme" "я_орел_425x200.png"] -format "png -alpha 1.0"
#Андроида с tcl/tk
image create photo logo_and -file [file join $mydir "imageme" "AndTk_inv_147x173.png"] -format "png -alpha 1.0"
#Свиток опечатанный
image create photo svitok -file [file join $mydir "imageme" "blue_svitok.png"] -format "png -alpha 1.0"
#Плитка
image create photo tileand -file [file join $mydir "imageme" "tile_green_and_32x32.png"] -format "png -alpha 1.0"
#Увеличить/уменьшить (отрицательное значение - уменьшение)
proc scaleImage {im xfactor {yfactor 0}} {
set mode -subsample
if {$xfactor>=0 && $yfactor>=0} {
set mode -zoom
} else {
set xfactor [expr $xfactor * -1]
}
if {$yfactor == 0} {set yfactor $xfactor}
set t [image create photo]
$t copy $im
$im blank
$im copy $t -shrink $mode $xfactor $yfactor
image delete $t
}
proc createtile {w  backg} {
image create photo tiled
tiled copy $backg -to 0 0 $::scrwidth $::scrheight -shrink
$backg copy tiled
image delete tiled
# Мостим холст
$w create image 0 0  
-image $backg  
-anchor nw
}
proc create_rectangle  {canv img x1 y1 x2 y2 color alfa {wbd 0} {colorline black} } {
image create photo $img -format "default -colorformat  rgb"
set rgb1 [winfo rgb $canv $color]
set cr  [lindex $rgb1 0]
set cg  [lindex $rgb1 1]
set cb  [lindex $rgb1 2]
set fill [format "#%04x%04x%04x" $cr $cg $cb ]
#Создаем цветной праямоугольник
$img put $fill -to 0 0 [expr {$x2 - $x1}] [expr {$y2 -$y1}]
#Сохраняем картинку
set dimg [$img data -format png]
#Создаем image с учетом alpha канала
image create photo $img -data $dimg -format "png -alpha $alfa"
#    $img put [list $rgb1] -to 0 0 [expr {$x2 - $x1}] [expr {$y2 -$y1}]
#Отображаем цветной прямоугольник
set imgr [$canv create image $x1 $y1 -image $img -anchor nw] 
set cc [subst {butImg $img}]
$canv bind $imgr <ButtonPress-1> $cc
#Оконтовка вокруг цветного прямоугольника
if {$wbd > 0 } {
set item [$canv create rect $x1 $y1 $x2 $y2 -outline $colorline -width $wbd ]
$canv bind $item <ButtonPress-1> $cc
}
return $imgr
}
proc butImg {img} {
tk_messageBox -title "Кнопка" -icon info -message "Нажали кнопку=$img" -detail "::screenwidth=$::scrwidthn::screenheight=$::scrheight" -parent .
if {$img == "exit"} {
set answer [tk_dialog .dialog2 "Конец работы" "Вы действительноnхотите выйти?" question 0 "Да" "Нет" ]
if {$answer == 0} {
exit
}	
}
}
proc page_titul {fr  logo_manufacturer} {
global mydir
#Создаем холст на весь экран
tkp::canvas $fr.can -borderwidth 0 -height [winfo screenheight .] -width [winfo screenwidth .] -relief flat
#Мостим холст плиткой 
createtile "$fr.can"  "tileand"
pack $fr.can  -anchor center -expand 1 -fill both -side top  -padx 0 -pady 0
#Вычисляем координаты для логотипа производителя
#update чтобы обновилась информация в БД об окнах
update
#    set aa [winfo height $fr.labtitul]
set aa $::padly
#Центрируем логотип разработчика
set ha [image width $logo_manufacturer]
set xman [expr {($::scrwidth - $ha) / 2 }]
$fr.can create image $xman $aa -image $logo_manufacturer -anchor nw -tag tag_logo
set blogo [$fr.can bbox tag_logo]
set wexit [lindex $blogo 3]
if {$::typetlf } {
set dlx [expr {$::padlx / 1}]
$fr.can create text [expr $dlx + 6] [expr {$wexit + $::padly + 6}] -anchor nw -text "Электронная подпись" -fill black -font {{Roboto Condensed Medium} 15 }
$fr.can create text $dlx [expr {$wexit + $::padly}] -anchor nw -text "Электронная подпись" -fill white -font {{Roboto Condensed Medium} 15 } -tag id_text0
update
set blogo [$fr.can bbox id_text0]
set wexit [lindex $blogo 3]
$fr.can create text [expr $dlx + 4] [expr {$wexit + $::padly + 4 - 80}] -anchor nw -text "для платформы Android" -fill black -font {{Roboto Condensed Medium} 13}
$fr.can create text $dlx [expr {$wexit + $::padly - 80}] -anchor nw -text "для платформы Android" -fill white -font {{Roboto Condensed Medium} 13} -tag id_text1
set blogo [$fr.can bbox id_text1]
set wexit [lindex $blogo 3]
$fr.can create text [expr $dlx + 3] [expr {$wexit + $::padly + 3 - 50}] -anchor nw -text "№ 63 ФЗ "Об электроннойnподписи от 6 апреля 2011 года"" -fill black -font {{Roboto} 10}
$fr.can create text $dlx [expr {$wexit + $::padly - 50}] -anchor nw -text "№ 63 ФЗ "Об электроннойnподписи от 6 апреля 2011 года"" -fill white -font {{Roboto} 10} -tag id_text2
set blogo [$fr.can bbox id_text2]
set wexit [lindex $blogo 3]
$fr.can create text [expr $dlx + 2] [expr {$wexit + $::padly + 2 - 40}] -text "Авторы: В.Н. Орловnhttp://soft.lissi.ru, http://www.lissi.run+7(495)589-99-53ne-mail: [email protected]" 
-anchor nw -fill black  -font {{Roboto} 9}
$fr.can create text $dlx [expr {$wexit + $::padly - 40}] -text "Авторы: В.Н. Орловnhttp://soft.lissi.ru, http://www.lissi.run+7(495)589-99-53ne-mail: [email protected]" 
-anchor nw -fill white -tag id_text3  -font {{Roboto} 9}
} else {
$fr.can create text [expr $::padlx + 2] [expr {$wexit + $::padly + 2}] -anchor nw -text "Электронная подпись" -fill black -font {{Nimbus Sans Narrow} 20}
$fr.can create text $::padlx [expr {$wexit + $::padly}] -anchor nw -text "Электронная подпись" -fill white -font {{Nimbus Sans Narrow} 20} -tag id_text0
set blogo [$fr.can bbox id_text0]
set wexit [lindex $blogo 3]
$fr.can create text [expr $::padlx + 2] [expr {$wexit + $::padly + 2 - 20}] -anchor nw -text "для платформы Android" -fill black -font {{Nimbus Sans Narrow} 18}
$fr.can create text $::padlx [expr {$wexit + $::padly - 20}] -anchor nw -text "для платформы Android" -fill white -font {{Nimbus Sans Narrow} 18} -tag id_text1
set blogo [$fr.can bbox id_text1]
set wexit [lindex $blogo 3]
$fr.can create text [expr $::padlx + 2] [expr {$wexit + $::padly + 2}] -anchor nw -text "№ 63 ФЗ "Об электроннойnподписи от 6 апреля 2011 года"" -fill black -font {{Nimbus Sans Narrow} 14}
$fr.can create text $::padlx [expr {$wexit + $::padly}] -anchor nw -text "№ 63 ФЗ "Об электроннойnподписи от 6 апреля 2011 года"" -fill white -font {{Nimbus Sans Narrow} 14} -tag id_text2
set blogo [$fr.can bbox id_text2]
set wexit [lindex $blogo 3]
$fr.can create text [expr $::padlx + 1] [expr {$wexit + $::padly + 1}] -text "Авторы: В.Н. Орловnhttp://soft.lissi.ru, http://www.lissi.run+7(495)589-99-53ne-mail: [email protected]" 
-anchor nw -fill black  -font {{Nimbus Sans Narrow} 12}
$fr.can create text $::padlx [expr {$wexit + $::padly}] -text "Авторы: В.Н. Орловnhttp://soft.lissi.ru, http://www.lissi.run+7(495)589-99-53ne-mail: [email protected]" 
-anchor nw -fill white -tag id_text3  -font {{Nimbus Sans Narrow} 12} -tag id_text3
set blogo [$fr.can bbox id_text2]
}
set blogo [$fr.can bbox id_text3]
set wland [lindex $blogo 3]
$fr.can create image $::padlx $wland -image logo_and -anchor nw -tag tag_land
set ha [image height logo_and]
set wa [image width logo_and]
set ha1 [expr {$ha - ($ha / 2 ) }]
$fr.can create image [expr {$wa - 80 }] [expr {$wland + $ha1}] -image svitok -anchor nw -tag tag_land
if {$::typetlf} {
set x1 [expr {$::padlx / 2}]
set y1 [expr {$wland + 120}]
set x2 [expr {$::::scrwidth - $x1}]
set y2 [expr {$y1 + 120}]
set wd 8
set rr 18
} else {
set x1 [expr {$::padlx / 2}]
set y1 [expr {$wland + 40}]
set x2 [expr {$::::scrwidth - $x1}]
set y2 [expr {$y1 + 40}]
set wd 4
set rr 6
}
set g5 [$fr.can gradient create linear -stops {{0 lightgreen} {1 green}}] 
set S3 [$fr.can style create -stroke "skyblue" -fill  $g5 -strokewidth $wd  -fillopacity 0.6]
set im1 [$fr.can create prect $x1 $y1 $x2 $y2 -rx $rr -style $S3]
$fr.can bind $im1 <ButtonPress-1> {butImg "img1"}
#Печатаем техт
set blogo [$fr.can bbox $im1]
set by2 [lindex $blogo 3]
set by1 [lindex $blogo 1]
set bb [expr {($by2 - $by1) / 2}]
set bx2 [lindex $blogo 2]
set bx1 [lindex $blogo 0]
set bbx [expr {($bx2 - $bx1) / 2}]
set txt1 [$fr.can create text [expr {$x1 + $::padlx * 2}] [expr {$y1 + 1 }] -anchor nw -text "Сайт разработчика" -fill black -font {{Arial} 10 normal}] 
#Центрируем техт
set btxt1 [$fr.can bbox $txt1]
#Смещение по оси Y
set ty2 [lindex $btxt1 3]
set ty1 [lindex $btxt1 1]
set tt [expr {$ty2 - $ty1}]
set tt [expr {$tt / 2}]
set offsy [expr {($by1 + $bb) - ($ty1 + $tt)}]
#Смещение по оси X
set tx2 [lindex $btxt1 2]
set tx1 [lindex $btxt1 0]
set ttx [expr {$tx2 - $tx1}]
set ttx [expr {$ttx / 2}]
set offsx [expr {($bx1 + $bbx) - ($tx1 + $ttx)}]
$fr.can move $txt1 $offsx $offsy
$fr.can bind $txt1 <ButtonPress-1> {butImg "img1"}
if {$::typetlf} {
set y1 [expr $y2 + 40]
set x2 [expr {$::::scrwidth - $x1}]
set y2 [expr {$y1 + 120}]
} else {
set y1 [expr {$y1 + 60}]
set x2 [expr {$::::scrwidth - $x1}]
set y2 [expr {$y1 + 40}]
}
set im1 [create_rectangle $fr.can "but2" $x1 $y1 $x2 $y2 "#2b972d" 0.6 $wd "skyblue"]
#Печатаем техт
set blogo [$fr.can bbox $im1]
set by2 [lindex $blogo 3]
set by1 [lindex $blogo 1]
set bb [expr {($by2 - $by1) / 2}]
set bx2 [lindex $blogo 2]
set bx1 [lindex $blogo 0]
set bbx [expr {($bx2 - $bx1) / 2}]
set txt1 [$fr.can create text [expr {$x1 + $::padlx * 2}] [expr {$y1 + 1 }] -anchor nw -text "Переход в основное меню" -fill black -font {{Roboto Condensed Medium} 12}] 
#Центрируем текст
set btxt1 [$fr.can bbox $txt1]
#Смещение по оси Y
set ty2 [lindex $btxt1 3]
set ty1 [lindex $btxt1 1]
set tt [expr {$ty2 - $ty1}]
set tt [expr {$tt / 2}]
set offsy [expr {($by1 + $bb) - ($ty1 + $tt)}]
#Смещение по оси X
set tx2 [lindex $btxt1 2]
set tx1 [lindex $btxt1 0]
set ttx [expr {$tx2 - $tx1}]
set ttx [expr {$ttx / 2}]
set offsx [expr {($bx1 + $bbx) - ($tx1 + $ttx)}]
$fr.can move $txt1 $offsx $offsy
$fr.can bind $txt1 <ButtonPress-1> {butImg "but2"}
if {$::typetlf} {
set x1 [expr {$::padlx / 2}]
set y1 [expr $y2 + 40]
set x2 [expr {$::::scrwidth - $x1}]
set y2 [expr {$y1 + 120}]
} else {
set x1 [expr {$::padlx / 2}]
set y1 [expr {$y1 + 60}]
set x2 [expr {$::::scrwidth - $x1}]
set y2 [expr {$y1 + 40}]
}
set S3 [$fr.can style create -stroke skyblue -fill  $g5 -strokewidth $wd  -fillopacity 0.6]
set im1 [$fr.can create prect $x1 $y1 $x2 $y2 -rx $rr -style $S3]
set blogo [$fr.can bbox $im1]
$fr.can bind $im1 <ButtonPress-1> {butImg "exit"}
set by2 [lindex $blogo 3]
set by1 [lindex $blogo 1]
set bb [expr {($by2 - $by1) / 2}]
set bx2 [lindex $blogo 2]
set bx1 [lindex $blogo 0]
set bbx [expr {($bx2 - $bx1) / 2}]
set txt1 [$fr.can create text [expr {$x1 + $::padlx * 2}] [expr {$y1 + 1 }] -anchor nw -text "Конец работы" -fill black  -font {Arial 10 normal}]
$fr.can bind $txt1 <ButtonPress-1> {butImg "exit"}
set btxt1 [$fr.can bbox $txt1]
#Смещение по оси Y
set ty2 [lindex $btxt1 3]
set ty1 [lindex $btxt1 1]
set tt [expr {$ty2 - $ty1}]
set tt [expr {$tt / 2}]
set offsy [expr {($by1 + $bb) - ($ty1 + $tt)}]
#Смещение по оси X
set tx2 [lindex $btxt1 2]
set tx1 [lindex $btxt1 0]
set ttx [expr {$tx2 - $tx1}]
set ttx [expr {$ttx / 2}]
set offsx [expr {($bx1 + $bbx) - ($tx1 + $ttx)}]
$fr.can move $txt1 $offsx $offsy
}
#Собственно скрипт
#Считываем размеры экрана
set ::scrwidth [winfo screenwidth .]
set ::scrheight [winfo screenheight .]
set ::typetlf 0
#Проверяем, что это телефон
if {$::scrwidth < $::scrheight} {
set ::typetlf 1
}
set ::padls 20
set ::padlx 15
set ::padly 15
if {$::typetlf} {
wm attributes . -fullscreen 1
scaleImage icon_openfile_18x16 3
scaleImage ::img::view_18x16 3
#Логотип производителя
scaleImage logo_orel 2
#Логотип продуктв
scaleImage logo_product 2
#Андроида tcl/tk
scaleImage logo_and 3
#Свиток опечатанный
scaleImage svitok 4
set ::padls 50
set ::padlx 75
set ::padly 50
} else {
#Конфигурирование виджета под смартфон
scaleImage logo_orel -2
set ::scrwidth 370
set ::scrheight 700
wm minsize . $::scrwidth $::scrheight
set geometr $::scrwidth
append geometr "x"
append geometr $::scrheight
append geometr "+0+0"
wm geometry . $geometr
}
#Создаем название продукта
set name_product "CryptoArmPKCS-A" 
label .labtitul -image logo_product -compound left -fg snow -text $name_product -font {Arial 10 bold} -anchor w  -width [winfo screenwidth .] -pady $::padls -padx 10 -bg #222222 
pack .labtitul -anchor nw -expand 0 -fill x -side top  -padx 1 -pady 0
#Создаем стартовую страницу
set i 0
ttk::frame .fr$i -pad 0 -padding 0
page_titul ".fr$i"  "logo_orel"
pack .fr$i -side top -anchor center -expand 1 -fill both -side top  -padx 0 -pady 0 
update

Pou egzekite script sa a, sèvi ak youn nan sèvis piblik undroidwish oswa vanillawish:

$ /usr/local/bin64/undroidwish-e5dc71ed9d-linux64   create_titul_page.tcl

oswa

$/usr/local/bin64/vanillawish-e5dc71ed9d-linux64  create_titul_page.tcl

Rezilta a montre nan premye ekran an.

Dezyèm paj la bay lis fonksyonalite ki sipòte pa sèvis piblik cryptoarmpkcs-A. Chak liy se yon bouton, lè klike sou, yo pral parèt yon paj fonksyonèl. Jeyometri plasman bouton an sou paj sa a detèmine pa polis yo itilize a. Anba a se script create_page_functions.tcl pou kreye dezyèm paj/fonksyonèl aplikasyon an. Nenpòt moun kapab tou edite li nan kostim fonksyon yo.

Script create_page_functions.tcl

package require Tk
package require tkpath 0.3.0
global mydir
set mydir [file dirname [info script]]
#Увеличить/уменьшить (отрицательное значение - уменьшение)
proc scaleImage {im xfactor {yfactor 0}} {
set mode -subsample
if {$xfactor>=0 && $yfactor>=0} {
set mode -zoom
} else {
set xfactor [expr $xfactor * -1]
}
if {$yfactor == 0} {set yfactor $xfactor}
set t [image create photo]
$t copy $im
$im blank
$im copy $t -shrink $mode $xfactor $yfactor
image delete $t
}
proc createtile {w  backg} {
image create photo tiled
tiled copy $backg -to 0 0 $::scrwidth $::scrheight -shrink
$backg copy tiled
image delete tiled
# Мостим холст
$w create image 0 0  
-image $backg  
-anchor nw
}
proc butCliked {num fr} {
pack forget  .fr1
set ::tekFrfunc $fr
pack $fr -side top -anchor center -expand 1 -fill both -side top  -padx 0 -pady 0 
tk_dialog .dialog1 "Dear user:" "Button $num was clickednFr=$fr" info 0 OK 
}
proc butImg {img} {
tk_messageBox -title "Кнопка" -icon info -message "Нажали кнопку=$img" -detail "::screenwidth=$::scrwidthn::screenheight=$::scrheight" -parent .
if {$img == "exit"} {
set answer [tk_dialog .dialog2 "Конец работы" "Вы действительноnхотите выйти?" question 0 "Да" "Нет" ]
if {$answer == 0} {
exit
}	
}
}
proc butReturn {} {
pack forget  $::tekFrfunc
pack .fr1 -side top -anchor center -expand 1 -fill both -side top  -padx 0 -pady 0 
#    tk_dialog .dialog1 "Dear user:" "Button $num was clickednFr=$fr" info 0 OK 
}
proc page_func {fr tile titul functions} {
#Кнопки  меню
upvar $functions but
#Создаем шрифт для кнопок
if {$::typetlf} {
set feFONT_button "-family {Roboto} -size 9 -weight bold -slant roman"
set widl 10
} else {
set feFONT_button "-family {Arial} -size 12 -weight bold -slant roman"
set widl 5
}
catch {font delete fontTEMP_drawer}
eval font create fontTEMP_drawer  $feFONT_button
#Вычисляем максимальныю длину текста
set drawerCNT 0
set strMaxWidthPx 15
set Ndrawers [expr {[array size but] - 1}]
while { $drawerCNT <= $Ndrawers } {
set strWidthPx [font measure fontTEMP_drawer "$but($drawerCNT)"]
if { $strWidthPx > $strMaxWidthPx } {
set strMaxWidthPx $strWidthPx
}
incr drawerCNT
}
set drawerWidthPx [expr $strMaxWidthPx + 10]
set xxx [expr {($::::scrwidth - $drawerWidthPx) / 2}]
if {$fr != ".fr1"} {
set hret [expr $::scrheight / 4]
} else {
set hret $::scrheight
}
set hret [expr $::scrheight / 4]
tkp::canvas $fr.can -borderwidth 0 -height $hret -width $::scrwidth -relief flat
#Мостим холст плиткой 
createtile "$fr.can"  $tile
pack $fr.can  -anchor center -expand 1 -fill both -side top  -padx 0 -pady 0
if {$titul != "" } {
set allfunc $titul
catch {font delete fontTEMP_titul}
set font_titul "-family {Roboto Condensed Medium} -size 15"
eval font create fontTEMP_titul  $font_titul
set funcWidthPx [font measure fontTEMP_titul "$allfunc"]
set dlx [expr {($::::scrwidth - $funcWidthPx) / 2}]
$fr.can create text [expr $dlx + 6] [expr {6 + 6}] -anchor nw -text "$allfunc" -fill black -font fontTEMP_titul
$fr.can create text $dlx 6 -anchor nw -text "$allfunc" -fill white -font fontTEMP_titul -tag id_text0
set blogo [$fr.can bbox id_text0]
set boxbut [expr ([lindex $blogo 3] + 6 + 6)]
} else {
set boxbut [expr 6 + 6]
}
#Вычисляем самый широкий текст у кнопок
#См. выше
#Размещаем кнопки
set BDwidth_canvas 0
set maxTextHeightPx [font metrics fontTEMP_drawer -linespace] 
set maxTextHeightPx [expr {$maxTextHeightPx + ( $maxTextHeightPx / 2)}]
set drawerHeightPx $maxTextHeightPx
set xLocTextPx [expr {($::::scrwidth - $drawerWidthPx) / 2}]
set yLocTextPx [expr $BDwidth_canvas + ($drawerHeightPx / 2) + $boxbut]
set canvasHeightPx [expr $Ndrawers * $drawerHeightPx]
set drawerCNT 0
set Ndrawers [expr {[array size but] - 1}]
while { $drawerCNT <= $Ndrawers } {
set yLineLocPx [ expr (( $drawerCNT ) * $drawerHeightPx + $boxbut)]
#Линия перед текстом
$fr.can create line 
$xLocTextPx $yLineLocPx 
[expr $drawerWidthPx + $xLocTextPx] $yLineLocPx 
-fill "#a0a0a0" -width $widl
$fr.can create text [expr $xLocTextPx + 5] $yLocTextPx 
-anchor w 
-font fontTEMP_drawer 
-text "$but($drawerCNT)" 
-tag textlineTag($drawerCNT)
if {$drawerCNT == 0} {
if {$fr == ".fr1"} {
$fr.can bind textlineTag($drawerCNT)  <ButtonRelease-1>   {butImg "but1"}
} else {
$fr.can bind textlineTag($drawerCNT)  <ButtonRelease-1>   {butReturn}
}
} else {
frame .fn$drawerCNT -background white -relief flat -pady 0 -padx 0
set titul $but($drawerCNT)
set cmd "$fr.can bind textlineTag($drawerCNT)  <ButtonRelease-1>   {butCliked $drawerCNT .fn$drawerCNT}"
set cmd [subst "$cmd"]
eval $cmd 
set but1(0) "Возврат в основное меню"
page_func ".fn$drawerCNT" voda "$titul" "but1"
}
incr drawerCNT
set yLocTextPx [ expr $yLocTextPx + $drawerHeightPx]
#Завершаюшая линия
if { $drawerCNT > $Ndrawers } {
set yLineLocPx [ expr (( $drawerCNT ) * $drawerHeightPx + $boxbut)]
$fr.can create line $xLocTextPx $yLineLocPx 
[expr $drawerWidthPx + $xLocTextPx] $yLineLocPx 
-fill "#a0a0a0" -width $widl
}
}
}
#Собственно скрипт
#Считываем размеры экрана
set ::scrwidth [winfo screenwidth .]
set ::scrheight [winfo screenheight .]
set ::typetlf 0
#Проверяем, что это телефон
if {$::scrwidth < $::scrheight} {
set ::typetlf 1
}
set ::padls 20
set ::padlx 15
set ::padly 15
if {$::typetlf} {
wm attributes . -fullscreen 1
#Логотип продуктв
scaleImage logo_product 2
set ::padls 50
set ::padlx 75
set ::padly 50
} else {
#Конфигурирование виджета под смартфон
set ::scrwidth 370
set ::scrheight 700
wm minsize . $::scrwidth $::scrheight
set geometr $::scrwidth
append geometr "x"
append geometr $::scrheight
append geometr "+0+0"
wm geometry . $geometr
}
#Грузим картинки
image create photo voda -file [file join $mydir "imageme" "voda_400x800.png"]
#Логотип продукта
image create photo logo_product -file [file join $mydir "imageme" "validcertkey_51x24.png"] 
#Создаем название продукта
set name_product "CryptoArmPKCS-A" 
label .labtitul -image logo_product -compound left -fg snow -text $name_product -font {Arial 10 bold} -anchor w  -width [winfo screenwidth .] -pady $::padls -padx 10 -bg #222222 
pack .labtitul -anchor nw -expand 0 -fill x -side top  -padx 1 -pady 0
#Создаем страницы с функционалом
set i 1
ttk::frame .fr$i -pad 0 -padding 0
#Кнопки основного меню
set but(0) "Стартовая страница" 
set but(1) "Подписать документ"
set but(2) "Работаем с ЭП (PKCS7)" 
set but(3) "Запрос на сертификат" 
set but(4) "Просмотр запроса/сертификата" 
set but(5) "Список криптомеханизмов"
set but(6) "Просмотр ASN1-структуры" 
set but(7) "Объекты токена" 
set but(8) "Работаем с PKCS12/PFX" 
set but(9) "Самоподписанный сертификат"
set but(10) "Об Утилите/Дистрибутивы" 
set but(11) "Создать Токены"
set but(12) "Конфигурировние токена"
if {$::typetlf} {
scaleImage voda 3 2
}
#Создаем страницу с функционалом
page_func ".fr$i" voda "Функционал" "but"
#Отображаем страницу с функционалом
pack .fr$i -side top -anchor center -expand 1 -fill both -side top  -padx 0 -pady 0

Script sa a tou prepare espas vid pou chak bouton fonksyon:

Espas vid yo plen ak widgets klasik ak tematik (labelframe, bouton, elatriye). Youn nan espas vid sa yo plen ka wè nan premye Ekran sou bò dwat la. Depi nan premye etap la nou konsantre sou travay ak veso PKCS#12 la, yo te itilize kòd la prèske san chanjman pou cryptoarmpkcs-A. Nan etap sa a fonksyon sa yo aplike:

siyen dokiman an (Cades-BES, CAdes-T, CAdes-XLT1);
Nou travay ak siyati elektwonik (PKCS7), ki gen ladan ajoute yon siyatè;
Gade sètifika/demann sètifika:
Nou travay ak PKCS12/PFX;
sou sèvis piblik/distribisyon yo:

Fonksyon ki rete yo gen plis rapò ak PKCS#11 tokens. Yo te ranvwaye pòsyon yo jiska Nouvèl Ane sa a. Li planifye pou konekte yon siy lojisyèl epi konekte ak nwaj siy.

Soti nan yon pwen de vi fonksyonèl, prèske tout bagay sanble ak sèvis piblik cryptoarmpkcs la. Men, gen kèk diferans. Pa egzanp, apre yo fin siyen yon dokiman, sèvis piblik la mande si yo pral verifye siyati a sou sitwèb Sèvis Eta a:

Lè w klike sou bouton "Wi", navigatè a ap chaje ak yon paj pou verifye siyati dokiman yo ak sètifika yo. Ann di touswit ke paj sa a pa vrèman fèt pou yon ekran smartphone. Sa a pral aparan lè w ap chwazi yon siyati epi, si siyati a detache, dosye a ak dokiman an. Men, si tout bagay anfòm, Lè sa a, nou pral jwenn yon rezilta pozitif:

Li ta dwe sonje ke tcheke siyati a ak sètifika sou sit wèb Sèvis Eta a sèlman gen sans si yo te resevwa sètifika a nan yon sant sètifikasyon akredite (CA). Sinon, siyati a ap toujou valab.

Pou rele navigatè a, mwen te oblije ajoute yon koup la liy nan pwosedi openUrl la:

proc openURL {url} {
global typesys
global macos
#  global windowsOS
#проверка, что утилита выполняется на смартфоне Android
if {$::typetlf} {
#Запуск браузера
borg activity android.intent.action.VIEW $url text/html
return
}
. . .
}

Yo rele navigatè a sou android jan sa a:

borg activity android.intent.action.VIEW <URL> text/html

Gen yon ti particularité lè ajoute yon nouvo siyatè nan yon dokiman te siyen deja. Nouvo sètifika siyatè a (oswa pito, menm yon veso PKCS#12 ki gen yon sètifika ak kle prive) dwe chwazi davans nan paj "Siyen yon dokiman" oswa "Travay ak PKCS12/PFX", sèvis piblik la ap fè w sonje. :

Pandan operasyon alontèm, revèy la ap kontinye make:

Tout sa ki rete se di ki kote pou telechaje distribisyon yo epi felisite w pou Nouvèl Ane k ap vini an epi swete tout moun tout pi bon an 2020!

Se konsa, distribisyon pou Linux, OS X, Windows ak Android:

Sous: www.habr.com

Estasyon travay kriptografik ki baze sou estanda kle piblik pou platfòm Android la

Add nouvo kòmantè Anile reply