Objektif
Li nesesè pou òganize yon tinèl VPN ant de aparèy, tankou liy Mikrotik ak Juniper SRX.
Kisa nou genyen?
Soti nan Mikrotik, nou te chwazi yon modèl sou sitwèb wiki Mikrotik ki ka sipòte chifreman pyès ki nan konpitè IPSec; nan opinyon nou an, li te tounen byen kontra enfòmèl ant ak chè, sètadi Mikrotik hEXS.
Modem USB a te achte nan men operatè mobil ki pi pre a; modèl la te Huawei E3370. Nou pa t fè okenn operasyon pou dekonekte operatè a. Tout bagay se estanda ak koud pa operatè a tèt li.
Nwayo a gen yon routeur santral Juniper SRX240H.
Sak pase
Li te posib aplike yon konplo travay ki pèmèt ou kreye yon koneksyon IPsec atravè yon operatè selilè, san yo pa gen yon adrès estatik, lè l sèvi avèk yon modèm, nan ki GRE Tinèl la vlope.
Dyagram koneksyon sa a itilize epi li travay sou modèm USB Beeline ak Megafon.
Konfigirasyon an se jan sa a:
Juniper SRX240H enstale nan nwayo a
Adrès lokal: 192.168.1.1/24
Adrès ekstèn: 1.1.1.1/30
GW: 1.1.1.2
Pwen aleka
Mikrotik hEX S
Adrès lokal: 192.168.152.1/24
Adrès ekstèn: dinamik
Yon ti dyagram pou ede w konprann kijan li fonksyone:
Konfigirasyon Juniper SRX240:
Version lojisyèl JUNOS [12.1X46-D82]
Konfigirasyon Juniper
interfaces {
ge-0/0/0 {
description Internet-1;
unit 0 {
family inet {
address 1.1.1.1/30;
}
}
}
gr-0/0/0 {
unit 1 {
description GRE-Tunnel;
tunnel {
source 172.31.152.2;
destination 172.31.152.1;
}
family inet;
vlan {
unit 0 {
family inet {
address 192.168.1.1/24;
}
}
st0 {
unit 5 {
description "Area - 192.168.152.0/24";
family inet {
mtu 1400;
}
}
routing-options {
static {
route 0.0.0.0/0 next-hop 1.1.1.2;
route 192.168.152.0/24 next-hop gr-0/0/0.1;
route 172.31.152.0/30 next-hop st0.5;
}
router-id 192.168.1.1;
}
security {
ike {
traceoptions {
file vpn.log size 256k files 5;
flag all;
}
policy ike-gretunnel {
mode aggressive;
description area-192.168.152.0;
proposal-set standard;
pre-shared-key ascii-text "mysecret"; ## SECRET-DATA
}
gateway gw-gretunnel {
ike-policy ike-gretunnel;
dynamic inet 172.31.152.1;
external-interface ge-0/0/0.0;
version v2-only;
}
ipsec {
}
policy vpn-policy0 {
perfect-forward-secrecy {
keys group2;
}
proposal-set standard;
}
vpn vpn-gretunnel {
bind-interface st0.5;
df-bit copy;
vpn-monitor {
optimized;
source-interface st0.5;
destination-ip 172.31.152.1;
}
ike {
gateway gw-gretunnel;
no-anti-replay;
ipsec-policy vpn-policy0;
install-interval 10;
}
establish-tunnels immediately;
}
}
policies {
from-zone vpn to-zone vpn {
policy st-vpn-vpn {
match {
source-address any;
destination-address any;
application any;
}
then {
permit;
log {
session-init;
session-close;
}
count;
}
}
}
from-zone trust to-zone vpn {
policy st-trust-to-vpn {
match {
source-address any;
destination-address any;
application any;
}
then {
permit;
log {
session-init;
session-close;
}
count;
}
}
}
from-zone vpn to-zone trust {
policy st-vpn-to-trust {
match {
source-address any;
destination-address any;
application any;
}
then {
permit;
log {
session-init;
session-close;
}
count;
}
}
}
zones {
security-zone trust {
vlan.0 {
host-inbound-traffic {
system-services {
all;
}
protocols {
all;
}
}
}
security-zone vpn {
interfaces {
st0.5 {
host-inbound-traffic {
protocols {
ospf;
}
}
}
gr-0/0/0.1 {
host-inbound-traffic {
system-services {
all;
}
protocols {
all;
}
}
}
security-zone untrust {
interfaces {
ge-0/0/0.0 {
host-inbound-traffic {
system-services {
ping;
ssh;
ike;
}
}
}
}
}
vlans {
vlan-local {
vlan-id 5;
l3-interface vlan.1;
}Konfigirasyon Mikrotik hEX S:
Vèsyon lojisyèl RouterOS [6.44.3]
Mikrotik konfigirasyon
/ip address
add address=172.31.152.1/24 comment=GRE-Tunnel interface=gre-srx network=172.31.152.0
add address=192.168.152.1/24 comment=Local-Area interface=bridge network=192.168.152.0
/interface gre
add comment=GRE-Tunnel-SRX-HQ !keepalive local-address=172.31.152.1 name=gre-srx remote-address=172.31.152.2
/ip ipsec policy group
add name=srx-gre
/ip ipsec profile
add dh-group=modp1024 dpd-interval=10s name=profile1
/ip ipsec peer
add address=1.1.1.1/32 comment=GRE-SRX exchange-mode=aggressive local-address=172.31.152.1 name=peer2 profile=profile1
/ip ipsec proposal
set [ find default=yes ] enc-algorithms=aes-256-cbc,aes-128-cbc,3des
add enc-algorithms=aes-128-cbc,3des name=proposal1
/ip route
add distance=10 dst-address=192.168.0.0/16 gateway=gre-srx
/ip ipsec identity
add comment=IPSec-GRE my-id=address:172.31.152.1 peer=peer2 policy-template-group=srx-gre secret=mysecret
/ip ipsec policy
set 0 disabled=yes
add dst-address=0.0.0.0/0 proposal=proposal1 sa-dst-address=1.1.1.1 sa-src-address=172.31.152.1 src-address=172.31.152.0/30 tunnel=yes
/ip address
add address=172.31.152.1/24 comment=GRE-Tunnel interface=gre-srx network=172.31.152.0
add address=192.168.152.1/24 comment=Local-Area interface=bridge network=192.168.152.0
Rezilta:
Soti nan bò Juniper SRX
netscreen@srx240> ping 192.168.152.1
PING 192.168.152.1 (192.168.152.1): 56 data bytes
64 bytes from 192.168.152.1: icmp_seq=0 ttl=64 time=29.290 ms
64 bytes from 192.168.152.1: icmp_seq=1 ttl=64 time=28.126 ms
64 bytes from 192.168.152.1: icmp_seq=2 ttl=64 time=26.775 ms
64 bytes from 192.168.152.1: icmp_seq=3 ttl=64 time=25.401 ms
^C
--- 192.168.152.1 ping statistics ---
4 packets transmitted, 4 packets received, 0% packet loss
round-trip min/avg/max/stddev = 25.401/27.398/29.290/1.457 msSoti nan Mikrotik
net[admin@GW-LTE-] > ping 192.168.1.1
SEQ HOST SIZE TTL TIME STATUS
0 192.168.1.1 56 64 34ms
1 192.168.1.1 56 64 40ms
2 192.168.1.1 56 64 37ms
3 192.168.1.1 56 64 40ms
4 192.168.1.1 56 64 51ms
sent=5 received=5 packet-loss=0% min-rtt=34ms avg-rtt=40ms max-rtt=51ms Jwenn
Apre travay la fè, nou te resevwa yon tinèl VPN ki estab, ki soti nan rezo aleka nou ka jwenn aksè nan tout rezo a ki sitiye dèyè Juniper la, epi, kòmsadwa, tounen.
Mwen pa rekòmande pou itilize IKE2 nan konplo sa a; yon sitiyasyon te parèt ke apre rdemare yon aparèy patikilye, IPSec pa t 'leve.
Sous: www.habr.com