Először is, reset the router settings without creating a default configuration, for example, via the console.
/system reset-configuration no-defaults=yes skip-backup=yesSecondly, we use the auto-configuration command to set up the wireless interface to connect to the access point and create a virtual interface, create a bridge interface and add both (primary and virtual) interfaces to the bridge ports.
Specify the wireless interface, Wi-Fi network name, and password in the settings.
/interface wireless setup-repeater number=wlan1 ssid=demowifi passphrase=demopasswordThirdly, add the necessary interfaces to the bridge for wireless and create an IP address on the bridge interface according to your network addressing.
/interface bridge port add bridge=bridge1 interface=all
/ip address add address=192.168.88.2/24 interface=bridge1 network=192.168.88.0Useful links
Forrás: habr.com
