Ụlọ nche ụlọ na ihe ndabere ya na rpm. Ịwụnye sentry si rpm, ntọala ntọala

Nkowasi

sentiri - ngwá ọrụ iji nyochaa mwepu na mperi na ngwa gị.

Njirimara igodo:

• ngwa ngwa itinye n'ime oru ngo,
• na-ejide njehie ma na ihe nchọgharị onye ọrụ yana na sava gị.
• N'efu,
• A na-emelite ndepụta mperi ozugbo,
• Ọ bụrụ na akara njehie ahụ dị ka edoziri wee pụta ọzọ, a ga-emepụta ya ọzọ wee buru ya n'uche na eriri dị iche.
• A na-achịkọta ma gosipụta njehie n'usoro ugboro ole ihe na-eme.
• Enwere ike ihicha mperi site na ọkwa, isi iyi ndekọ, ọkwa ndekọ, aha nkesa, wdg.

Tụnyere na ndekọ ELK: Ihe kachasị mkpa bụ na na ELK, ndekọ ọhụrụ ọ bụla nke otu ụdị bụ ntinye dị iche. na n'ụlọ mkpọrọ, ewezuga otu ụdị ọhụrụ ọ bụla bụ naanị + 1 na ọnụọgụ ndekọ ya

Sentry na-akwado ọtụtụ asụsụ mmemme. Nkọwa ndị ọzọ ebe a.

Sentry na-agba ọsọ na docker na docker-dede

Ị nwere ike ịgba ọsọ Sentry site na iji docker na docker-Compose dị ka akọwara ebe a: https://github.com/getsentry/onpremise. Mana edemede ahụ na-ewepụta ọrụ ndị ọzọ n'otu ihe nkesa ahụ n'otu ọnọdụ (na-enweghị mmegide mmejọ) (Maka ụdị sentry 10.0.0):

• data
• postgres
• chọgharịa
• onye na-elekọta zoo
• kafka
• ụlọ akụ
• ihe atụ

Ọ bụrụ na ịchọrọ nnabata mmejọ, ị ga-eji atụmatụ ngwaahịa igwe ojii ma ọ bụ tinye Sentry na-enweghị edemede a.

Ngosipụta a na-akọwa usoro iwu ụlọ Sentry na ndabere ya na rpm. Ọ bụrụ na ịchọrọ ịwụnye Sentry ebe enweghị ịntanetị, ị nwere ike ịme ebe nchekwa yum site na rpm natara.

Nkọwa dị mkpa na mkpokọta na ịwụnye ngwugwu

Ụfọdụ ngwugwu na-adabere na ibe ha. Ya mere, a na-ekewa usoro mgbakọ na ntinye n'ime usoro dị iche iche.

IHE:

Nke a post kpuchiri iwulite na ịwụnye ụdị Sentry 9.1.2. Mgbe ndị mmepe wepụtachara obere mwepụta ole na ole, ị nwere ike wuo ụdị Sentry 10.X.Y. Ọtụtụ n'ime nkwa kachasị ọhụrụ maka nna ukwu bụ ndozi.

Ihe nkesa chọrọ maka ịrụ rpm

Ka enwere ọtụtụ CPUs, ka a ga-ewu ngwa ngwa semaphore na ngwugwu ihe atụ

Gbanyụọ Selinux

Ndị obodo ga-akwado naanị ma ọ bụrụ na mmadụ dee iwu selinux maka Sentry.

sudo sed -i s/^SELINUX=.*$/SELINUX=disabled/ /etc/selinux/config
sudo reboot

Ijikọ ebe nchekwa ntọhapụ epel

sudo yum install -y epel-release git

Anyị na-anakọta ịdabere na pip rpm wee wụnye ha. Faịlụ 1general_dependencies.sh

echo "Install dependencies"
sudo yum install -y cargo gcc gcc-c++ libffi-devel libjpeg-devel libxml2-devel 
libxslt libxslt-devel make mc openssl-devel python-devel memcached 
python-lxml python-nose python2-pip python34 rpm-build rpmdevtools 
ruby-devel rubygems zlib-devel redis xmlsec1-openssl xmlsec1 
libtool-ltdl-devel xmlsec1-devel xmlsec1-openssl-devel openldap-devel

echo "Build common pip dependencies to rpm by fpm"
gem install --no-document fpm
echo "For chardet==3.0.2 need setuptools>=12"
echo "For cryptography==2.8 need setuptools>=18.5"
fpm -s python -t rpm setuptools==18.5
sudo yum install -y python-setuptools-18.5-1.noarch.rpm
fpm -s python -t rpm --name python2-pip pip==20.0.2
sudo yum install -y python2-pip-20.0.2-1.noarch.rpm

Wụnye ma mee PostgreSQL 9.6 iji wuo python-psycopg2-binary. Faịlụ 2psycopg2-binary.sh

Ị nwere ike ịgbanwe ụdị PostgreSQL na edemede.

sudo yum install -y postgresql-devel
fpm -s python -t rpm psycopg2-binary==2.7.7
sudo yum install -y python-psycopg2-binary-2.7.7-1.x86_64.rpm
sudo yum remove -y postgresql-devel postgresql postgresql-libs

Chịkọta ma wụnye Python-dateutil rpm. Faịlụ 3dateutil.sh

#!/bin/bash

echo "Build and install python-dateutil rpm"
mkdir -p ~/rpmbuild/{BUILD,RPMS,SOURCES,SRPMS,SPECS}
spectool -g -R spec/python-dateutil.spec
wget https://raw.githubusercontent.com/patsevanton/sentry-rpm/master/spec/python-dateutil-system-zoneinfo.patch -P ~/rpmbuild/SOURCES
wget https://raw.githubusercontent.com/patsevanton/sentry-rpm/master/spec/python-dateutil-timelex-string.patch -P ~/rpmbuild/SOURCES
rpmbuild --bb spec/python-dateutil.spec
sudo yum install -y ~/rpmbuild/RPMS/noarch/python-dateutil-2.4.2-1.el7.noarch.rpm

Chịkọta ma wụnye Python-urllib3 rpm. Faịlụ 4urllib3.sh

aha mmebi iwu

echo "Build pip dependencies to rpm by fpm for urllib3"
fpm -s python -t rpm pycparser==2.19
sudo yum install -y python-pycparser-2.19-1.noarch.rpm
fpm -s python -t rpm cffi==1.14.0
sudo yum install -y python-cffi-1.14.0-1.x86_64.rpm
fpm -s python -t rpm cryptography==2.8
sudo yum install -y python-cryptography-2.8-1.x86_64.rpm
fpm -s python -t rpm idna==2.7
sudo yum install -y python-idna-2.7-1.noarch.rpm
sudo chmod +r /usr/lib/python2.7/site-packages/idna-2.7-py2.7.egg-info/PKG-INFO
fpm -s python -t rpm pyOpenSSL==19.1.0
sudo yum install -y python-pyopenssl-19.1.0-1.noarch.rpm
fpm -s python -t rpm pbr==5.4.4
sudo yum install -y python-pbr-5.4.4-1.noarch.rpm
fpm -s python -t rpm mock==2.0.0
sudo yum install -y python-mock-2.0.0-1.noarch.rpm
fpm -s python -t rpm py==1.8.1
sudo yum install -y python-py-1.8.1-1.noarch.rpm
fpm -s python -t rpm six==1.10.0
sudo yum install -y python-six-1.10.0-1.noarch.rpm
fpm -s python -t rpm pluggy==0.6.0
sudo yum install -y python-pluggy-0.6.0-1.noarch.rpm
fpm -s python -t rpm attrs==19.3.0
sudo yum install -y python-attrs-19.3.0-1.noarch.rpm
fpm -s python -t rpm more-itertools==5.0.0
sudo yum install -y python-more-itertools-5.0.0-1.noarch.rpm
fpm -s python -t rpm pytest==3.5.1
sudo yum install -y python-pytest-3.5.1-1.noarch.rpm

echo "Build urllib rpm"
spectool -g -R spec/urllib3-1.24.2.spec
sudo yum-builddep -y spec/urllib3-1.24.2.spec
rpmbuild --bb spec/urllib3-1.24.2.spec
sudo yum install -y ~/rpmbuild/RPMS/noarch/python-urllib3-1.24.2-1.el7.noarch.rpm

Anyị na-anakọta ihe ndabere pip fọdụrụ na rpm wee wụnye ha. Faịlụ 5other_dependencies.sh

aha mmebi iwu

echo "Build rpm by fpm"
fpm -s python -t rpm jmespath==0.9.5
sudo yum install -y python-jmespath-0.9.5-1.noarch.rpm
fpm -s python -t rpm amqp==1.4.9
sudo yum install -y python-amqp-1.4.9-1.noarch.rpm
fpm -s python -t rpm anyjson==0.3.3
sudo yum install -y python-anyjson-0.3.3-1.noarch.rpm
fpm -s python -t rpm billiard==3.3.0.23
sudo yum install -y python-billiard-3.3.0.23-1.x86_64.rpm
fpm -s python -t rpm docutils==0.16
sudo yum install -y python-docutils-0.16-1.noarch.rpm
fpm -s python -t rpm Pillow==4.2.1
sudo yum install -y python-pillow-4.2.1-1.x86_64.rpm
fpm -s python -t rpm botocore==1.5.70
sudo yum install -y python-botocore-1.5.70-1.noarch.rpm
fpm -s python -t rpm boto3==1.4.5
sudo yum install -y python-boto3-1.4.5-1.noarch.rpm
fpm -s python -t rpm chardet==3.0.2
sudo yum install -y python-chardet-3.0.2-1.noarch.rpm
fpm -s python -t rpm croniter==0.3.31
sudo yum install -y python-croniter-0.3.31-1.noarch.rpm
fpm -s python -t rpm cssselect==1.1.0
sudo yum install -y python-cssselect-1.1.0-1.noarch.rpm
fpm -s python -t rpm cssutils==0.9.10
sudo yum install -y python-cssutils-0.9.10-1.noarch.rpm
fpm -s python -t rpm django-crispy-forms==1.4.0
sudo yum install -y python-django-crispy-forms-1.4.0-1.noarch.rpm
fpm -s python -t rpm django-jsonfield==0.9.13
sudo yum install -y python-django-jsonfield-0.9.13-1.noarch.rpm
fpm -s python -t rpm django-picklefield==0.3.2
sudo yum install -y python-django-picklefield-0.3.2-1.noarch.rpm
fpm -s python -t rpm django-sudo==2.1.0
sudo yum install -y python-django-sudo-2.1.0-1.noarch.rpm
fpm -s python -t rpm django-templatetag-sugar==1.0
sudo yum install -y python-django-templatetag-sugar-1.0-1.noarch.rpm
fpm -s python -t rpm djangorestframework==2.4.8
sudo yum install -y python-djangorestframework-2.4.8-1.noarch.rpm
fpm -s python -t rpm email-reply-parser==0.2.0
sudo yum install -y python-email_reply_parser-0.2.0-1.noarch.rpm
fpm -s python -t rpm enum34==1.1.9
sudo yum install -y python-enum34-1.1.9-1.noarch.rpm
fpm -s python -t rpm functools32==3.2.3.post2
sudo yum install -y python-functools32-3.2.3_2-1.noarch.rpm
fpm -s python -t rpm futures==3.3.0
sudo yum install -y python-futures-3.3.0-1.noarch.rpm
fpm -s python -t rpm hiredis==0.1.6
sudo yum install -y python-hiredis-0.1.6-1.x86_64.rpm
fpm -s python -t rpm honcho==1.0.1
sudo yum install -y python-honcho-1.0.1-1.noarch.rpm
fpm -s python -t rpm httplib2==0.17.0
sudo yum install -y python-httplib2-0.17.0-1.noarch.rpm
fpm -s python -t rpm jsonschema==2.6.0
sudo yum install -y python-jsonschema-2.6.0-1.noarch.rpm
fpm -s python -t rpm kombu==3.0.35
sudo yum install -y python-kombu-3.0.35-1.noarch.rpm
fpm -s python -t rpm celery==3.1.18
sudo yum install -y python-celery-3.1.18-1.noarch.rpm
fpm -s python -t rpm loremipsum==1.0.5
sudo yum install -y python-loremipsum-1.0.5-1.noarch.rpm
fpm -s python -t rpm lxml==4.5.0
sudo yum install -y python-lxml-4.5.0-1.x86_64.rpm
fpm -s python -t rpm milksnake==0.1.5
sudo yum install -y python-milksnake-0.1.5-1.noarch.rpm
fpm -s python -t rpm mistune==0.8.4
sudo yum install -y python-mistune-0.8.4-1.noarch.rpm
fpm -s python -t rpm mmh3==2.3.1
sudo yum install -y python-mmh3-2.3.1-1.x86_64.rpm
fpm -s python -t rpm exam==0.10.6
sudo yum install -y python-exam-0.10.6-1.noarch.rpm
fpm -s python -t rpm msgpack==0.6.2
sudo yum install -y python-msgpack-0.6.2-1.x86_64.rpm
fpm -s python -t rpm oauth2==1.9.0.post1
sudo yum install -y python-oauth2-1.9.0.post1-1.noarch.rpm
fpm -s python -t rpm oauthlib==3.1.0
sudo yum install -y python-oauthlib-3.1.0-1.noarch.rpm
fpm -s python -t rpm parsimonious==0.8.0
sudo yum install -y python-parsimonious-0.8.0-1.noarch.rpm
fpm -s python -t rpm requests==2.20.1
sudo yum install -y python-requests-2.20.1-1.noarch.rpm
fpm -s python -t rpm petname==2.0
sudo yum install -y python-petname-2.0-1.noarch.rpm
fpm -s python -t rpm python-utils==2.3.0
sudo yum install -y python-utils-2.3.0-1.noarch.rpm
fpm -s python -t rpm progressbar2==3.10.1
sudo yum install -y python-progressbar2-3.10.1-1.noarch.rpm
fpm -s python -t rpm pytest-django==2.9.1
sudo yum install -y python-pytest-django-2.9.1-1.noarch.rpm
fpm -s python -t rpm pytest-html==1.9.0
sudo yum install -y python-pytest-html-1.9.0-1.noarch.rpm
fpm -s python -t rpm python-memcached==1.59
sudo yum install -y python-memcached-1.59-1.noarch.rpm
fpm -s python -t rpm python-openid==2.2.5
sudo yum install -y python-openid-2.2.5-1.noarch.rpm
fpm -s python -t rpm python-u2flib-server==4.0.1
sudo yum install -y python-u2flib-server-4.0.1-1.noarch.rpm
fpm -s python -t rpm qrcode==5.3
sudo yum install -y python-qrcode-5.3-1.noarch.rpm
fpm -s python -t rpm querystring-parser==1.2.4
sudo yum install -y python-querystring_parser-1.2.4-1.noarch.rpm
fpm -s python -t rpm redis==2.10.5
sudo yum install -y python-redis-2.10.5-1.noarch.rpm
fpm -s python -t rpm rb==1.7
sudo yum install -y python-rb-1.7-1.noarch.rpm
fpm -s python -t rpm redis-py-cluster==1.3.4
sudo yum install -y python-redis-py-cluster-1.3.4-1.noarch.rpm
fpm -s python -t rpm requests-oauthlib==0.3.3
sudo yum install -y python-requests-oauthlib-0.3.3-1.noarch.rpm
fpm -s python -t rpm percy==2.0.2
sudo yum install -y python-percy-2.0.2-1.noarch.rpm
fpm -s python -t rpm selenium==3.141.0
sudo yum install -y python-selenium-3.141.0-1.noarch.rpm
fpm -s python -t rpm semaphore==0.4.65
sudo yum install -y python-semaphore-0.4.65-1.x86_64.rpm
fpm -s python -t rpm sentry-sdk==0.14.1
sudo yum install -y python-sentry-sdk-0.14.1-1.noarch.rpm
fpm -s python -t rpm setproctitle==1.1.10
sudo yum install -y python-setproctitle-1.1.10-1.x86_64.rpm
fpm -s python -t rpm simplejson==3.8.2
sudo yum install -y python-simplejson-3.8.2-1.x86_64.rpm
fpm -s python -t rpm sqlparse==0.1.19
sudo yum install -y python-sqlparse-0.1.19-1.noarch.rpm
fpm -s python -t rpm statsd==3.1
sudo yum install -y python-statsd-3.1-1.noarch.rpm
fpm -s python -t rpm strict-rfc3339==0.7
sudo yum install -y python-strict-rfc3339-0.7-1.noarch.rpm
fpm -s python -t rpm structlog==16.1.0
sudo yum install -y python-structlog-16.1.0-1.noarch.rpm
fpm -s python -t rpm symbolic==6.1.4
sudo yum install -y python-symbolic-6.1.4-1.x86_64.rpm
fpm -s python -t rpm toronado==0.0.11
sudo yum install -y python-toronado-0.0.11-1.noarch.rpm
fpm -s python -t rpm ua-parser==0.7.3
sudo yum install -y python-ua-parser-0.7.3-1.noarch.rpm
fpm -s python -t rpm uwsgi==2.0.18
sudo yum install -y python-uwsgi-2.0.18-1.noarch.rpm
fpm -s python -t rpm -n PyYAML pyyaml==3.11
sudo yum install -y PyYAML-3.11-1.x86_64.rpm
fpm -s python -t rpm django-auth-ldap==1.2.17
sudo yum install -y python-django-auth-ldap-1.2.17-1.noarch.rpm

Anyị na-achịkọta na rpm sentry ma wụnye ya. Faịlụ 6sentry.sh

echo "Install nodejs and yarn"
curl -sL https://rpm.nodesource.com/setup_10.x | sudo bash -
sudo yum install -y nodejs
sudo sed -e '/nodesource-source/,+6d' -i /etc/yum.repos.d/nodesource-el7.repo
curl -sL https://dl.yarnpkg.com/rpm/yarn.repo | sudo tee /etc/yum.repos.d/yarn.repo
sudo yum install -y yarn

cp spec/config.yml spec/sentry.conf.py ~/rpmbuild/SOURCES
cp spec/sentry-cron.service spec/sentry-web.service spec/sentry-worker.service ~/rpmbuild/SOURCES
spectool -g spec/sentry-9.1.2.spec
sudo yum-builddep -y spec/sentry-9.1.2.spec
rpmbuild -bb spec/sentry-9.1.2.spec
sudo yum install -y ~/rpmbuild/RPMS/noarch/python-sentry-9.1.2-1.el7.noarch.rpm

Ịwụnye sentry rpm na ndabere na sava ọzọ

Gbanyụọ Selinux

sudo sed -i s/^SELINUX=.*$/SELINUX=disabled/ /etc/selinux/config
#### sudo reboot

Ijikọ ebe nchekwa ntọhapụ epel

sudo yum install -y epel-release git libjpeg-turbo redis
sudo systemctl start redis

Wụnye ma mee PostgreSQL 9.6. Faịlụ 7postgresql.sh

sudo yum install -y https://download.postgresql.org/pub/repos/yum/reporpms/EL-7-x86_64/pgdg-redhat-repo-latest.noarch.rpm
sudo yum install -y postgresql96 postgresql96-server postgresql96-contrib
sudo /usr/pgsql-9.6/bin/postgresql96-setup initdb
sudo systemctl start postgresql-9.6
sudo -i -u postgres psql -c "create user sentry with password 'password';"
sudo -i -u postgres psql -c "create database sentry with owner sentry;"
sudo -i -u postgres psql -c "alter role sentry superuser;"

# TODO: Проверить без прав superuser для роли sentry
#sudo -i -u postgres psql -c "alter role sentry nosuperuser;"
#sudo -i -u postgres psql -c "CREATE SCHEMA main AUTHORIZATION sentry;"

Anyị na-amalite njem (ịmepụta atụmatụ nchekwa data) wee malite ọrụ. Faịlụ 8start_sentry.sh

sudo systemctl start redis
sudo -i -u sentry /usr/bin/sentry --config /etc/sentry/ upgrade
sudo systemctl start sentry-worker
sudo systemctl start sentry-cron
sudo systemctl start sentry-web

Ịmepụta onye nchịkwa Sentry dị n'ime

https://forum.sentry.io/t/noninteractive-first-time-setup-of-user-via-upgrade/164

sudo -i -u sentry /usr/bin/sentry --config /etc/sentry/ createuser 

Ụlọ ọrụ sentry na rpm, ntinye, nhazi maka ndị umengwụ

Gbanyụọ Selinux

sudo sed -i s/^SELINUX=.*$/SELINUX=disabled/ /etc/selinux/config
sudo reboot

Gbaa scripts iji wuo na wụnye sentry

sudo yum install -y epel-release git
git clone https://github.com/patsevanton/sentry-rpm.git
cd sentry-rpm
./1general_dependencies.sh
./2psycopg2-binary.sh
./3dateutil.sh
./4urllib3.sh
./5other_dependencies.sh
./6sentry.sh
Копируем rpm из rpmbuild/RPMS и корня sentry-rpm на целевой сервер. Создаем yum репо. Устанавливаем все собранные rpm пакеты.
./7postgresql.sh
./8start_sentry.sh

Ịmepụta onye nchịkwa Sentry dị n'ime

https://forum.sentry.io/t/noninteractive-first-time-setup-of-user-via-upgrade/164

sudo -i -u sentry /usr/bin/sentry --config /etc/sentry/ createuser 

Nwepu ule izipu

Anyị ga-anwale ya na ọrụ java. Download java na maven.

sudo yum install -y java-1.8.0-openjdk-devel git
sudo wget http://repos.fedorapeople.org/repos/dchen/apache-maven/epel-apache-maven.repo -O /etc/yum.repos.d/epel-apache-maven.repo
sudo yum -y install apache-maven
git clone https://github.com/getsentry/examples.git
cd examples/java/basic
mvn compile exec:java

Ugbu a, anyị kwesịrị ịmalite java site na ịnyefe ya SENTRY_DSN

SENTRY_DSN=https://public:private@host:port/1 mvn exec:java

Ugbu a, anyị kwesịrị ịchọta SENTRY_DSN emepụtara ndabara.

Ka anyị gaa Sentry. Ka anyị gaa na ọrụ ndabara internal.

ma ọ bụ

Ka anyị gaa na ntọala ọrụ.

Gaa na igodo ndị ahịa (DSN).

Detuo DSN. Nke a bụ SENTRY_DSN.

Anyị na-eji paramita a malite java.

SENTRY_DSN=http://[email protected]:9000/1 mvn exec:java

Anyị na-ahụ foto a.

Ọ bụrụ na anyị aga UnsupportedOperationException, mgbe ahụ, anyị ga-ahụ gbasaa ozi.

Jiri Sentry mepụta nkata telegram

https://t.me/sentry_ru

N'ime mmemme ndị a:

• Nwalee LDAP. E dobelarị edemede ahụ 9sentry-ldap-auth.sh
• Nwalee ụdị sentry 10.0.X ka ewepụtara obere mpụta ole na ole.

Ebe nchekwa nwere scripts:

https://github.com/patsevanton/sentry-rpm

isi: www.habr.com