ProHoster > Блог > ozi ịntanetị > Ụlọ ọrụ SLS Septemba 6

Ụlọ ọrụ SLS Septemba 6

Ụlọ ọrụ SLS Septemba 6
Anyị na-akpọ gị òkù ka ị bịa ọmụmụ ihe na mbipụta SLS-3D, nke a ga-eme na Septemba 6 na ogige teknụzụ Kalibr: "Ohere, uru karịa FDM na SLA, ihe atụ nke mmejuputa".

Na nzukọ ọmụmụ ihe, ndị nnọchiteanya Sinterit, bụ ndị bịara kpọmkwem maka nzube a site na Poland, ga-ewebata ndị sonyere na usoro mbụ dịnụ maka idozi nsogbu mmepụta site na iji SLS 3D obibi.

Ụlọ ọrụ SLS Septemba 6
Site na Poland, site n'aka onye nrụpụta, Adrianna Kania, onye na-ahụ maka ịzụ ahịa mba ụwa nke Sinterit, na Januz Wroblewski, onye nduzi ahịa, bịara nzukọ ọmụmụ ihe ahụ.

Adrianna Kania

ntozu:

  • Master na Foundry Engineering na AGH University of Science and Technology
  • Asambodo Ọzụzụ 3D Systems Corporation
  • Asambodo CSWA sitere na Solidworks

Januz Wroblewski

ntozu:

  • MBA Harvard
  • Master na Civil Engineering na Wroclaw University of Technology

Na mmemme seminarị

Ọmụmụ ihe a ga-ekpuchi isiokwu ndị a:

  • Kedu teknụzụ obibi akwụkwọ 3D na-eji usoro nkwado, gịnị kpatara na ọ ka mma ibipụta na-enweghị ha yana ihe kpatara na ha adịghị mkpa mgbe ị na-ebipụta SLS;
  • Kedu ihe kpatara teknụzụ SLS ji arụ ọrụ nke ọma n'ihe gbasara akụrụngwa na oge maka iji na ụlọ ọrụ;
  • Ihe kpatara na SLS bụ otu n'ime ụzọ kachasị mma isi bipụta ihe zuru ezu;
  • Ngwa maka mbipụta SLS - Sinterit powders, ihe onwunwe ha na ngwa;
  • Ọmụmaatụ nke ngwa na ike nke usoro nbipute Sinterit Lisa.

Gụkwuo na webụsaịtị, debanye aha wee bịa na nzukọ ọmụmụ ihe Fraịde a.

Taa, anyị na-ekwukwa maka ihe ngosi na Top 3D Expo 2019 September ogbako, raara nye iji mgbakwunye na teknụzụ dijitalụ na ọgwụ.

GỤKWUO:

Ọgwụ na Top 3D Expo

Mbipụta 3D na ọgwụ: kedu ihe dị ọhụrụ?

Ụlọ ọrụ SLS Septemba 6
Site na akụkọ “Mbipụta 3D na ọgwụ. Kedu nke pụtara ọhụrụ?" ga-ekwu Roman Olegovich Gorbatov - Candidates of Medical Sciences, traumatologist-orthopedist, osote prọfesọ nke Department of Traumatology, Orthopedics na Military Surgery, isi nke Laboratory nke Additive Teknụzụ nke Federal State Budgetary Educational Institution of Higher Education "PIMU" nke Ministry of Health Russia. , onye so na bọọdụ nke "Association of Specialists in 3D Printing in Medicine."

Ụlọ ọrụ SLS Septemba 6

Isiokwu

Akụkọ a ga-enye ozi na:

  • olu nke ahịa maka ngwaahịa ọgwụ 3D ebipụtara ma na Russia na mba ọzọ;
  • ihe, akụrụngwa, ngwanrọ na teknụzụ obibi akwụkwọ 3D bụ isi ejiri na ọgwụ;
  • ọnụ ọgụgụ nke ngwaahịa etinyere n'ime mmadụ, emepụtara site na iji teknụzụ mgbakwunye;
  • iji mbipụta 3D na dentistry, traumatology na orthopedics, neurosurgery, rehabilitation, pharmacology, oncology, etc.;
  • bioprinting nke akụkụ na anụ ahụ;
  • na-akpali ụlọ ọgwụ ikpe nke na-emeso ndị ọrịa na-eji 3D obibi;
  • isi ntụziaka nke mmepe nke ọgwụ 3D obibi akwụkwọ na Russia na n'ụwa.

Chọpụta ihe ndị ọzọ site n'ige ntị n'okwu ọgbakọ. Zụrụ tiketi na webụsaịtị mmemme tupu Septemba 15, tupu ọnụ ahịa abawanye.

Ihe ngwọta 3D na orthopedics

Ụlọ ọrụ SLS Septemba 6
Onye isi mmepe nke ụlọ ọrụ ahụ "Ngwọta 3D" Maxim Sukhanov ga-ekwu okwu n'isiokwu bụ "Ngwọta 3D na Orthopedics".

Ụlọ ọrụ SLS Septemba 6

Isiokwu

Mmemme gụnyere:

  • nkenke banyere ụlọ ọrụ;
  • iji mbipụta 3D na orthopedics;
  • ọgwụgwọ corset dị ka usoro ọgwụgwọ scoliosis;
  • nkenke akụkọ ihe mere eme nke ọgwụgwọ;
  • usoro ọgwụgwọ dị ugbu a;
  • akụkọ ndị ọrịa;
  • teknụzụ ọgbara ọhụrụ;
  • usoro mmepụta;
  • nsonaazụ.

Ndị a abụghị ndị na-ekwu okwu gbasara ahụike na akụkọ gbasara ogbako ahụ; a ga-enwe ndị ọzọ, yana ọtụtụ isiokwu dị iche iche kpamkpam site na mpaghara dị iche iche nke ụlọ ọrụ. Hụ webụsaịtị maka mmemme mmemme dị ugbu a.

Iji nweta ozi ndị ọzọ gbasara iji mbipụta 3D, nyocha 3D na nhazi dijitalụ na ọgwụ, gaa na ngosi na ogbako.

Klas Master na Top 3D Expo

Ụlọ ọrụ SLS Septemba 6

  • Klas Master na mbipụta 3D (Basic),
  • Klas Master na mbipụta 3D (Nke dị elu),
  • Klas Master na nyocha 3D (Basic),
  • Klas Master na nyocha 3D (Advanced),
  • Klas Master na nhazi nhazi nke akụkụ 3D ebipụtara,
  • Klas Master na nkedo site na iji mbipụta 3D.

Gụkwuo na webụsaịtị ihe omume, ma soro ọkwa anyị - anyị ga-agwa gị gbasara ihe omume ngosi-ogbako nke ọma.

Ọzọkwa na Top 3D Expo

Ngosipụta

Ụlọ ọrụ SLS Septemba 6
Na akụkụ ngosi ị ga-ahụ ihe ngosi nke ngwaahịa ọhụrụ n'ọhịa nke mgbakwunye na teknụzụ dijitalụ sitere na ndị na-emepụta ahịa ahịa. Gụnyere:

  • Ngwa 3D - ndị na-ebi akwụkwọ na nyocha, akụrụngwa maka VR na AR;
  • Ihe maka mbipụta 3D na ihe atụ nke ngwaahịa ndị a na-ebipụta na ha;
  • Software maka mpaghara niile nke mmepụta dijitalụ;
  • Igwe CNC na robotics maka ojiji na ụlọ ọrụ dị iche iche;
  • Ihe ngwọta agbakwunyere pụrụ iche maka ụlọ ọrụ na ụlọ ọrụ.

Nyocha 3D efu

Ụlọ ọrụ SLS Septemba 6
Onye ọbịa ngosi ọ bụla ga-enwe ohere ịnata nnomi dijitalụ n'efu site na ịme nyocha ogologo zuru oke na nyocha Texel 3D n'ime sekọnd 30.

Nzukọ na tebụl gburugburu

Ụlọ ọrụ SLS Septemba 6
Na ogbako a, ị ga-anụ ọtụtụ ihe ngosi na-adọrọ mmasị site n'aka ndị ọkachamara na-ahụ maka iji teknụzụ 3D na mpaghara ndị dị ka:

  • Ọgwụ na bioprinting;
  • Aerospace;
  • Ihe owuwu na ihe owuwu;
  • Mmụta;
  • Robotics;
  • Nyocha 3D na ntụgharị injinia;
  • Ụlọ ọrụ SLM obibi;
  • Mmụta mekanịkal injinịa.

Nzukọ a ga-agụnyekwa tebụl gburugburu na isiokwu ahụ "Otu esi enweta ego site na mbipụta 3D", ebe ndị ọkachamara ụlọ ọrụ ga-atụle:

  • Ntuziaka kachasị mma nke 2019;
  • Ọrụ ndị nwere obere oge nkwụghachi ụgwọ;
  • Kedu teknụzụ ga-agbanwe ahịa na ebe itinye ego na 2020;
  • Otu esi enweta ego na mbipụta FDM, SLM na SLS;
  • Kedu ihe dị iche na mmepe nke Russian, European, American na Chinese - nke n'ime ha bụ nke kachasị ọnụ ahịa na ntụkwasị obi.

N'ihe ngosi na ogbako nke Top 3D Expo, ị ga-ahụ ndị enyi ọhụrụ azụmahịa na njikọ bara uru na ndị ọkachamara sitere na ụlọ ọrụ si n'akụkụ ụwa dum. Ma nke ahụ abụghị ihe niile - lee webụsaịtị maka nkọwa zuru ezu na mmemme emelitere mgbe niile nke mmemme ahụ.

isi: www.habr.com

Tinye a comment