Traduzione dell'articolo preparato per gli studenti del corso . Sei interessato a svilupparti in questa direzione? Guarda la registrazione della trasmissione della master class di Ivan Piskunov
In questo articolo ti guiderò attraverso i passaggi per configurare un server DNS su RHEL 7 o CentOS 7. Per la dimostrazione ho utilizzato Red Hat Enterprise Linux 7.4. Il nostro obiettivo è creare un record A e un record PTR rispettivamente per le zone di ricerca diretta e inversa.
Innanzitutto, installa i pacchetti RPM necessari per il server DNS.
NOTA: per RHEL è necessario avere , o puoi , con il quale il gestore pacchetti “yum” può installare i pacchetti RPM e le dipendenze necessari.
# yum install bind bind-chroot caching-nameserverLe mie impostazioni:
# hostname
golinuxhub-client.example
Мой IP-адрес 192.168.1.7
# ip address | egrep 'inet.*enp0s3'
inet 192.168.1.7/24 brd 192.168.1.255 scope global dynamic enp0s3Poiché utilizzeremo chroot, dobbiamo disabilitare il servizio.
# systemctl stop named
# systemctl disable namedQuindi copia i file richiesti nella directory chroot.
NOTA. Usa l'argomentazione -p in una squadra cp per preservare diritti e proprietari.
[root@golinuxhub-client ~]# cp -rpvf /usr/share/doc/bind-9.9.4/sample/etc/* /var/named/chroot/etc/
‘/usr/share/doc/bind-9.9.4/sample/etc/named.conf’ -> ‘/var/named/chroot/etc/named.conf’
‘/usr/share/doc/bind-9.9.4/sample/etc/named.rfc1912.zones’ -> ‘/var/named/chroot/etc/named.rfc1912.zones’Quindi copia i file associati alla zona in una nuova posizione.
[root@golinuxhub-client ~]# cp -rpvf /usr/share/doc/bind-9.9.4/sample/var/named/* /var/named/chroot/var/named/
‘/usr/share/doc/bind-9.9.4/sample/var/named/data’ -> ‘/var/named/chroot/var/named/data’
‘/usr/share/doc/bind-9.9.4/sample/var/named/my.external.zone.db’ -> ‘/var/named/chroot/var/named/my.external.zone.db’
‘/usr/share/doc/bind-9.9.4/sample/var/named/my.internal.zone.db’ -> ‘/var/named/chroot/var/named/my.internal.zone.db’
‘/usr/share/doc/bind-9.9.4/sample/var/named/named.ca’ -> ‘/var/named/chroot/var/named/named.ca’
‘/usr/share/doc/bind-9.9.4/sample/var/named/named.empty’ -> ‘/var/named/chroot/var/named/named.empty’
‘/usr/share/doc/bind-9.9.4/sample/var/named/named.localhost’ -> ‘/var/named/chroot/var/named/named.localhost’
‘/usr/share/doc/bind-9.9.4/sample/var/named/named.loopback’ -> ‘/var/named/chroot/var/named/named.loopback’
‘/usr/share/doc/bind-9.9.4/sample/var/named/slaves’ -> ‘/var/named/chroot/var/named/slaves’
‘/usr/share/doc/bind-9.9.4/sample/var/named/slaves/my.ddns.internal.zone.db’ -> ‘/var/named/chroot/var/named/slaves/my.ddns.internal.zone.db’
‘/usr/share/doc/bind-9.9.4/sample/var/named/slaves/my.slave.internal.zone.db’ -> ‘/var/named/chroot/var/named/slaves/my.slave.internal.zone.db’
```bash
Теперь давайте посмотрим на основной файл конфигурации.
```bash
# cd /var/named/chroot/etc/Cancella il contenuto di name.conf e incolla quanto segue.
[root@golinuxhub-client etc]# vim named.conf
options {
listen-on port 53 { 127.0.0.1; any; };
# listen-on-v6 port 53 { ::1; };
directory "/var/named";
dump-file "/var/named/data/cache_dump.db";
statistics-file "/var/named/data/named_stats.txt";
memstatistics-file "/var/named/data/named_mem_stats.txt";
allow-query { localhost; any; };
allow-query-cache { localhost; any; };
};
logging {
channel default_debug {
file "data/named.run";
severity dynamic;
};
};
view my_resolver {
match-clients { localhost; any; };
recursion yes;
include "/etc/named.rfc1912.zones";
};È necessario aggiungere informazioni specifiche sulla zona /var/named/chroot/etc/named.rfc1912.zones. Aggiungi le voci di seguito. Il file example.zone è il file della zona di ricerca diretta e esempio.rzone - file della zona inversa.
NOTA IMPORTANTE: la zona di ricerca inversa contiene 1.168.192 perché il mio indirizzo IP è 192.168.1.7
zone "example" IN {
type master;
file "example.zone";
allow-update { none; };
};
zone "1.168.192.in-addr.arpa" IN {
type master;
file "example.rzone";
allow-update { none; };
};I file associati alle zone si trovano qui:
# cd /var/named/chroot/var/named/Successivamente, creeremo file per le zone avanti e indietro. I nomi dei file saranno gli stessi indicati sopra nel file denominato.rfc1912.zones. Abbiamo già diversi modelli predefiniti che possiamo utilizzare.
# cp -p named.localhost example.zone
# cp -p named.loopback example.rzoneCome puoi vedere, le autorizzazioni attuali su tutti i file e le directory appartengono a radice.
[root@golinuxhub-client named]# ll
total 32
drwxr-xr-x. 2 root root 6 May 22 2017 data
-rw-r--r--. 1 root root 168 May 22 2017 example.rzone
-rw-r--r--. 1 root root 152 May 22 2017 example.zone
-rw-r--r--. 1 root root 56 May 22 2017 my.external.zone.db
-rw-r--r--. 1 root root 56 May 22 2017 my.internal.zone.db
-rw-r--r--. 1 root root 2281 May 22 2017 named.ca
-rw-r--r--. 1 root root 152 May 22 2017 named.empty
-rw-r--r--. 1 root root 152 May 22 2017 named.localhost
-rw-r--r--. 1 root root 168 May 22 2017 named.loopback
drwxr-xr-x. 2 root root 71 Feb 12 21:02 slavesModificare i permessi di tutti i file per indicare l'utente come proprietario radice e gruppo detto.
# chown root:named *Ma per i dati il proprietario deve esserlo nominato: nominato.
# chown -R named:named data
# ls -l
total 32
drwxr-xr-x. 2 named named 6 May 22 2017 data
-rw-r--r--. 1 root named 168 May 22 2017 example.rzone
-rw-r--r--. 1 root named 152 May 22 2017 example.zone
-rw-r--r--. 1 root named 56 May 22 2017 my.external.zone.db
-rw-r--r--. 1 root named 56 May 22 2017 my.internal.zone.db
-rw-r--r--. 1 root named 2281 May 22 2017 named.ca
-rw-r--r--. 1 root named 152 May 22 2017 named.empty
-rw-r--r--. 1 root named 152 May 22 2017 named.localhost
-rw-r--r--. 1 root named 168 May 22 2017 named.loopback
drwxr-xr-x. 2 root named 71 Feb 12 21:02 slavesAggiungi il seguente contenuto al file della zona di inoltro. Qui creiamo un record A per localhost (golinuxhub-client) e un altro per il server (golinuxhub-server).
# vim example.zone
$TTL 1D
@ IN SOA example. root (
1 ; serial
3H ; refresh
15M ; retry
1W ; expire
1D ) ; minimum
IN NS example.
IN A 192.168.1.7
golinuxhub-server IN A 192.168.1.5
golinuxhub-client IN A 192.169.1.7Successivamente, aggiungi il contenuto al file della zona inversa. Qui creiamo un record PTR per golinuxhub-client e per golinuxhub-server.
# vim example.rzone
$TTL 1D
@ IN SOA example. root.example. (
1997022700 ; serial
28800 ; refresh
14400 ; retry
3600000 ; expire
86400 ) ; minimum
IN NS example.
5 IN PTR golinuxhub-server.example.
7 IN PTR golinuxhub-client.example.Prima di lanciare il servizio denominato-chroot, controlliamo la configurazione del file di zona.
[root@golinuxhub-client named]# named-checkzone golinuxhub-client.example example.zone
zone golinuxhub-client.example/IN: loaded serial 1
OK
[root@golinuxhub-client named]# named-checkzone golinuxhub-client.example example.rzone
zone golinuxhub-client.example/IN: loaded serial 1997022700
OKTutto sembra a posto. Ora controlla il file di configurazione usando il seguente comando.
[root@golinuxhub-client named]# named-checkconf -t /var/named/chroot/ /etc/named.confQuindi, tutto è stato completato con successo.
[root@golinuxhub-client named]# echo $?
0NOTA IMPORTANTE: ho SELinux in modalità permissiva
# getenforce
PermissiveTutto sembra a posto, quindi è ora di lanciare il nostro servizio denominato-chroot .
[root@golinuxhub-client named]# systemctl restart named-chroot[root@golinuxhub-client named]# systemctl status named-chroot
● named-chroot.service - Berkeley Internet Name Domain (DNS)
Loaded: loaded (/usr/lib/systemd/system/named-chroot.service; disabled; vendor preset: disabled)
Active: active (running) since Mon 2018-02-12 21:53:23 IST; 19s ago
Process: 5236 ExecStop=/bin/sh -c /usr/sbin/rndc stop > /dev/null 2>&1 || /bin/kill -TERM $MAINPID (code=exited, status=0/SUCCESS)
Process: 5327 ExecStart=/usr/sbin/named -u named -c ${NAMEDCONF} -t /var/named/chroot $OPTIONS (code=exited, status=0/SUCCESS)
Process: 5325 ExecStartPre=/bin/bash -c if [ ! "$DISABLE_ZONE_CHECKING" == "yes" ]; then /usr/sbin/named-checkconf -t /var/named/chroot -z "$NAMEDCONF"; else echo "Checking of zone files is disabled"; fi (code=exited, status=0/SUCCESS)
Main PID: 5330 (named)
CGroup: /system.slice/named-chroot.service
└─5330 /usr/sbin/named -u named -c /etc/named.conf -t /var/named/chroot
Feb 12 21:53:23 golinuxhub-client.example named[5330]: managed-keys-zone/my_resolver: loaded serial 0
Feb 12 21:53:23 golinuxhub-client.example named[5330]: zone 0.in-addr.arpa/IN/my_resolver: loaded serial 0
Feb 12 21:53:23 golinuxhub-client.example named[5330]: zone 1.0.0.127.in-addr.arpa/IN/my_resolver: loaded serial 0
Feb 12 21:53:23 golinuxhub-client.example named[5330]: zone 1.168.192.in-addr.arpa/IN/my_resolver: loaded serial 1997022700
Feb 12 21:53:23 golinuxhub-client.example named[5330]: zone example/IN/my_resolver: loaded serial 1
Feb 12 21:53:23 golinuxhub-client.example named[5330]: zone localhost/IN/my_resolver: loaded serial 0
Feb 12 21:53:23 golinuxhub-client.example named[5330]: zone 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa/IN/my_resolver: loaded serial 0
Feb 12 21:53:23 golinuxhub-client.example named[5330]: zone localhost.localdomain/IN/my_resolver: loaded serial 0
Feb 12 21:53:23 golinuxhub-client.example named[5330]: all zones loaded
Feb 12 21:53:23 golinuxhub-client.example named[5330]: running
```bash
Убедитесь, что resolv.conf содержит ваш IP-адрес, чтобы он мог работать в качестве DNS-сервера.
```bash
# cat /etc/resolv.conf
search example
nameserver 192.168.1.7
```bash
Давайте проверим наш DNS-сервер для обратной зоны, используя dig.
```bash
[root@golinuxhub-client named]# dig -x 192.168.1.5
; <<>> DiG 9.9.4-RedHat-9.9.4-50.el7 <<>> -x 192.168.1.5
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 40331
;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 2
;; OPT PSEUDOSECTION:
; EDNS: version: 0, flags:; udp: 4096
;; QUESTION SECTION:
;5.1.168.192.in-addr.arpa. IN PTR
;; ANSWER SECTION:
5.1.168.192.in-addr.arpa. 86400 IN PTR golinuxhub-server.example.
;; AUTHORITY SECTION:
1.168.192.in-addr.arpa. 86400 IN NS example.
;; ADDITIONAL SECTION:
example. 86400 IN A 192.168.1.7
;; Query time: 1 msec
;; SERVER: 192.168.1.7#53(192.168.1.7)
;; WHEN: Mon Feb 12 22:13:17 IST 2018
;; MSG SIZE rcvd: 122Come puoi vedere, abbiamo ricevuto una risposta positiva (ANSWER) alla nostra richiesta (QUERY).
[root@golinuxhub-client named]# dig -x 192.168.1.7
; <<>> DiG 9.9.4-RedHat-9.9.4-50.el7 <<>> -x 192.168.1.7
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 55804
;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 2
;; OPT PSEUDOSECTION:
; EDNS: version: 0, flags:; udp: 4096
;; QUESTION SECTION:
;7.1.168.192.in-addr.arpa. IN PTR
;; ANSWER SECTION:
7.1.168.192.in-addr.arpa. 86400 IN PTR golinuxhub-client.example.
;; AUTHORITY SECTION:
1.168.192.in-addr.arpa. 86400 IN NS example.
;; ADDITIONAL SECTION:
example. 86400 IN A 192.168.1.7
;; Query time: 1 msec
;; SERVER: 192.168.1.7#53(192.168.1.7)
;; WHEN: Mon Feb 12 22:12:54 IST 2018
;; MSG SIZE rcvd: 122Possiamo controllare la zona diretta allo stesso modo.
[root@golinuxhub-client named]# nslookup golinuxhub-client.example
Server: 192.168.1.7
Address: 192.168.1.7#53
Name: golinuxhub-client.example
Address: 192.169.1.7
[root@golinuxhub-client named]# nslookup golinuxhub-server.example
Server: 192.168.1.7
Address: 192.168.1.7#53
Name: golinuxhub-server.example
Address: 192.168.1.5Questo articolo è un po' obsoleto poiché in RHEL 7 non è più necessario copiare i file di configurazione del bind nel chroot. .
Fonte: habr.com