Di wêneyê de, kernel Linux bi rêya GPIO silavan ji we re dişîne.
Di vê beşa çîroka veguheztina RISC-V RocketChip ji bo panelek Chineseînî ya bi Cyclone IV re, em ê hîn Linux-ê bimeşînin, û her weha fêr bibin ka meriv çawa bixwe kontrolkera bîranîna IP Core mîheng dike û hûrgulî danasîna DTS ya amûrê biguhezîne. Ev gotar berdewamiyek e , lê, berevajî ya berê ya berbiçav berfireh, ew ê pir kurt be.
… Ji ber ku setup_smp Tenê tê gotin heke kernel bi piştgiriya SMP ve hatî mîheng kirin, hûn dikarin biceribînin ku pir-core neçalak bikin. Ger hewce be ku ez di modula bîranînê de jî piştgirîya atomê bicîh bikim (ji min re xuya bû ku cache bi serê xwe vê yekê diqelişe), ew ê ne xweş be, lê di doza yek-core de divê ew bi me re destwerdanê neke.
Dîsa jî derneket...
[ 0.000000] OF: fdt: Ignoring memory range 0x80000000 - 0x80200000
[ 0.000000] Linux version 4.19.0-sifive-1+ (trosinenko@trosinenko-pc) (gcc version 8.3.0 (Buildroot 2019.02-07449-g4eddd28f99)) #1 Thu Jul 4 18:38:10 MSK 2019
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] Initial ramdisk at: 0x(____ptrval____) (16777216 bytes)
[ 0.000000] Zone ranges:
[ 0.000000] DMA32 [mem 0x0000000080200000-0x00000000bfffffff]
[ 0.000000] Normal [mem 0x00000000c0000000-0x00000bffffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080200000-0x00000000bfffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080200000-0x00000000bfffffff]
[ 0.000000] software IO TLB: mapped [mem 0xbb1fc000-0xbf1fc000] (64MB)
[ 0.000000] Unable to find "cpu" devicetree entry
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258055
[ 0.000000] Kernel command line: debug console=ttySIF0,125200 root=/dev/mmcblk0p2 loglevel=7 rootwait
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] Sorting __ex_table...
[ 0.000000] BUG: Bad page state in process swapper pfn:80bf7
[ 0.000000] page:ffffffe03f029e08 count:0 mapcount:-65280 mapping:0000000000000000 index:0x1
[ 0.000000] flags: 0x0()
[ 0.000000] raw: 0000000000000000 0000000000000100 0000000000000200 0000000000000000
[ 0.000000] raw: 0000000000000001 0000000000000000 00000000ffff00ff
[ 0.000000] page dumped because: nonzero mapcount
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.0-sifive-1+ #1
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffe00002cfde>] walk_stackframe+0x0/0xa0
[ 0.000000] [<ffffffe00002d1da>] show_stack+0x2a/0x34
[ 0.000000] [<ffffffe00063c898>] chachachllachachachTradeonachachach_inachachipachachachachllachachachTradeonachachachdevachachachypachachachllachachachTradeona+0x20/0x28
[ 0.000000] [<ffffffe00009499c>] bad_page+0xe4/0x102
[ 0.000000] [<ffffffe0000949f2>] free_pages_check_bad+0x38/0x7a
[ 0.000000] [<ffffffe000094bb0>] free_pcppages_bulk+0x106/0x36c
[ 0.000000] [<ffffffe0000957be>] free_unref_page_commit.isra.23+0x86/0x8e
[ 0.000000] [<ffffffe0000960bc>] free_unref_page+0x44/0x58
[ 0.000000] [<ffffffe0000960de>] __free_pages.part.28+0xe/0x22
[ 0.000000] [<ffffffe0000056da>] __free_pages_bootmem+0x86/0x90
[ 0.000000] [<ffffffe000007c46>] free_all_bootmem+0x156/0x1ba
[ 0.000000] [<ffffffe0000023f8>] mem_init+0x36/0x44
[ 0.000000] [<ffffffe0000007a0>] start_kernel+0x1aa/0x328
[ 0.000000] [<ffffffe000000058>] _sinittext+0x58/0x5c
[ 0.000000] Disabling lock debugging due to kernel taint
[ 0.000000] BUG: Bad page state in process swapper pfn:80bf9
[ 0.000000] page:ffffffe03f029e78 count:0 mapcount:-65280 mapping:0000000000000000 index:0x0
[ 0.000000] flags: 0x0()
[ 0.000000] raw: 0000000000000000 ffffffe03f020080 ffffffe03f020080 0000000000000000
[ 0.000000] raw: 0000000000000000 0000000000000000 00000000ffff00ff
[ 0.000000] page dumped because: nonzero mapcount
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G B 4.19.0-sifive-1+ #1
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffe00002cfde>] walk_stackframe+0x0/0xa0
[ 0.000000] [<ffffffe00002d1da>] show_stack+0x2a/0x34
[ 0.000000] [<ffffffe00063c898>] chachachllachachachTradeonachachach_inachachipachachachachllachachachTradeonachachachdevachachachypachachachllachachachTradeona+0x20/0x28
[ 0.000000] [<ffffffe00009499c>] bad_page+0xe4/0x102
[ 0.000000] [<ffffffe0000949f2>] free_pages_check_bad+0x38/0x7a
[ 0.000000] [<ffffffe0000955c6>] __free_pages_ok+0x3fe/0x430
[ 0.000000] [<ffffffe0000960ea>] __free_pages.part.28+0x1a/0x22
[ 0.000000] [<ffffffe0000056da>] __free_pages_bootmem+0x86/0x90
[ 0.000000] [<ffffffe000007c46>] free_all_bootmem+0x156/0x1ba
[ 0.000000] [<ffffffe0000023f8>] mem_init+0x36/0x44
[ 0.000000] [<ffffffe0000007a0>] start_kernel+0x1aa/0x328
[ 0.000000] [<ffffffe000000058>] _sinittext+0x58/0x5c
[ 0.000000] BUG: Bad page state in process swapper pfn:80bfa
[ 0.000000] page:ffffffe03f029eb0 count:0 mapcount:-65280 mapping:0000000000000000 index:0x0
[ 0.000000] flags: 0x0()
[ 0.000000] raw: 0000000000000000 ffffffe03f0200b8 ffffffe03f0200b8 0000000000000000
[ 0.000000] raw: 0000000000000000 0000000000000000 00000000ffff00ff
[ 0.000000] page dumped because: nonzero mapcount
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G B 4.19.0-sifive-1+ #1
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffe00002cfde>] walk_stackframe+0x0/0xa0
[ 0.000000] [<ffffffe00002d1da>] show_stack+0x2a/0x34
[ 0.000000] [<ffffffe00063c898>] chachachllachachachTradeonachachach_inachachipachachachachllachachachTradeonachachachdevachachachypachachachllachachachTradeona+0x20/0x28
[ 0.000000] [<ffffffe00009499c>] bad_page+0xe4/0x102
[ 0.000000] [<ffffffe0000949f2>] free_pages_check_bad+0x38/0x7a
[ 0.000000] [<ffffffe0000955c6>] __free_pages_ok+0x3fe/0x430
[ 0.000000] [<ffffffe0000960ea>] __free_pages.part.28+0x1a/0x22
[ 0.000000] [<ffffffe0000056da>] __free_pages_bootmem+0x86/0x90
[ 0.000000] [<ffffffe000007c46>] free_all_bootmem+0x156/0x1ba
[ 0.000000] [<ffffffe0000023f8>] mem_init+0x36/0x44
[ 0.000000] [<ffffffe0000007a0>] start_kernel+0x1aa/0x328
[ 0.000000] [<ffffffe000000058>] _sinittext+0x58/0x5c
[ 0.000000] BUG: Bad page state in process swapper pfn:80bfb
[ 0.000000] page:ffffffe03f029ee8 count:0 mapcount:-65280 mapping:0000000000000000 index:0x0
[ 0.000000] flags: 0x0()
[ 0.000000] raw: 0000000000000000 ffffffe03f0200f0 ffffffe03f0200f0 0000000000000000
[ 0.000000] raw: 0000000000000000 0000000000000000 00000000ffff00ff
[ 0.000000] page dumped because: nonzero mapcount
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G B 4.19.0-sifive-1+ #1
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffe00002cfde>] walk_stackframe+0x0/0xa0
[ 0.000000] [<ffffffe00002d1da>] show_stack+0x2a/0x34
[ 0.000000] [<ffffffe00063c898>] chachachllachachachTradeonachachach_inachachipachachachachllachachachTradeonachachachdevachachachypachachachllachachachTradeona+0x20/0x28
[ 0.000000] [<ffffffe00009499c>] bad_page+0xe4/0x102
[ 0.000000] [<ffffffe0000949f2>] free_pages_check_bad+0x38/0x7a
[ 0.000000] [<ffffffe0000955c6>] __free_pages_ok+0x3fe/0x430
[ 0.000000] [<ffffffe0000960ea>] __free_pages.part.28+0x1a/0x22
[ 0.000000] [<ffffffe0000056da>] __free_pages_bootmem+0x86/0x90
[ 0.000000] [<ffffffe000007c46>] free_all_bootmem+0x156/0x1ba
[ 0.000000] [<ffffffe0000023f8>] mem_init+0x36/0x44
[ 0.000000] [<ffffffe0000007a0>] start_kernel+0x1aa/0x328
[ 0.000000] [<ffffffe000000058>] _sinittext+0x58/0x5c
[ 0.000000] BUG: Bad page state in process swapper pfn:80bfc
[ 0.000000] page:ffffffe03f029f20 count:0 mapcount:-65280 mapping:0000000000000000 index:0x0
[ 0.000000] flags: 0x0()
[ 0.000000] raw: 0000000000000000 ffffffe03f020028 ffffffe03f020028 0000000000000000
[ 0.000000] raw: 0000000000000000 0000000000000000 00000000ffff00ff
...Balkêş e ku piştî hemî debugkirinê min biryar da ku binihêrim ka hilberîna kernelê "referans" çawa xuya dike, wî got. make qemu, û xeletiyek wekhev dît.
Mixabin, asta paşîn (kernel Linux) tevlihevtir e: GDB, ku bi JTAG ve bi RocketChip-ê ve girêdayî ye, xuya ye ku bi navnîşanên laşî re dixebite bêyî ku MMU çawa were mîheng kirin, û kernel di vê gavê de ku em jê re eleqedar dibin jixwe dîmenê mîheng kiriye. ji navnîşanan, ji ber vê yekê hêsan e ku meriv bêje display/10i $pc ew ê nexebite - em ê tenê pir tiştan bibînin unimp. Lê heke me berê xwe da berdêl (xuya ye ku 0x80200000 -> 0xffffffe000000000), wê hingê hûn dikarin bixapînin:
1: x/10i $pc
=> 0xffffffe000002436 <setup_smp>: unimp
0xffffffe000002438 <setup_smp+2>: unimp
0xffffffe00000243a <setup_smp+4>: unimp
0xffffffe00000243c <setup_smp+6>: unimp
0xffffffe00000243e <setup_smp+8>: unimp
0xffffffe000002440 <setup_smp+10>: unimp
0xffffffe000002442 <setup_smp+12>: unimp
0xffffffe000002444 <setup_smp+14>: unimp
0xffffffe000002446 <setup_smp+16>: unimp
0xffffffe000002448 <setup_smp+18>: unimp
(gdb) undisplay 1
(gdb) display/10i ($pc - 0xffffffe000002436 + 0x80202436)
2: x/10i ($pc - 0xffffffe000002436 + 0x80202436)
0x80202436: addi sp,sp,-96
0x80202438: sd s0,80(sp)
0x8020243a: sd s1,72(sp)
0x8020243c: sd s2,64(sp)
0x8020243e: sd s3,56(sp)
0x80202440: sd s4,48(sp)
0x80202442: sd s5,40(sp)
0x80202444: sd s6,32(sp)
0x80202446: sd s7,24(sp)
0x80202448: sd s8,16(sp)Xalên veqetandinê bi heman rengî têne danîn:
(gdb) p setup_smp
$1 = {<text variable, no debug info>} 0xffffffe000002436 <setup_smp>
(gdb) b *0x80202436
Breakpoint 1 at 0x80202436
(gdb) c
Continuing.
Program received signal SIGTRAP, Trace/breakpoint trap.
setup_smp () at /home/trosinenko/freedom-u-sdk/linux/arch/riscv/kernel/smpboot.c:58
58 while ((dn = of_find_node_by_type(dn, "cpu"))) {
(gdb) bt
#0 setup_smp () at /home/trosinenko/freedom-u-sdk/linux/arch/riscv/kernel/smpboot.c:58
#1 0xffffffe0000022a2 in setup_arch () at /home/trosinenko/freedom-u-sdk/linux/arch/riscv/kernel/setup.c:253
#2 0x0000000000000000 in ?? ()
Backtrace stopped: frame did not save the PCLê hûn neçar in ku wan bi destan ji holê rakin da ku bi pêş de biçin - ji bo GDB ev celebek xefikek bi tevahî nayê fêm kirin e. Oh, erê, heke hûn biqewimin dibêjin s an n li gorî si, gdb dê hewl bide ku nuqteyek veqetandî ya nepenî têxe nav, ku ji ber sedemên diyar dê neyê danîn, lê rêyek tune ku GDB-ê nerazî bike. Lê lez nekin ku panelê ji nû ve bidin destpêkirin - li gorî çavdêriyên min, bes e ku hûn tenê gdb ji nû ve bidin destpêkirin (bala xwe bidin ku dibe ku xalên şikestî yên kevn winda nebin).
Bi rastî, hûn ê neçar bimînin ku bi pirsgirêka orîjînal re mijûl bibin: cîhkirina xeletkirinê printk nav fonksiyonek of_find_node_by_type, ku ji hêla koda lêgerînê ya kernelê ya boot processor ve tê bikar anîn, nîşan dide ku ew li şûna navên celebên cîhazê hin çopê dibîne. Mînakî, ew rêza "Bendera Serial" ji cîhek digire, her çend ev eşkere ne di qada dtb de ye. device_type. Piştî ku li van baytên di wêneya kernelê de geriyam, min ew dîtin, li guheztinê nihêrî, û tiştê eşkere fêm kir: mezinahiya kernelê di pîvanên bootê de bi eşkere kêm tê texmîn kirin: 8Mb tê veqetandin, lê ew ji deh zêdetir digire. Min 16Mb veqetand, lê xerîbî nesekinî. Piştî reqsê bi xwendina FDT-ê ji navnîşanên cihêreng (bi gelemperî navnîşan li kernelê di qeydê de tê veguheztin a1), Min di dawiyê de biryar da ku bişopînim, lê çi сейчас li wir tê pars kirin. Xweşbextane, li şûna ku hûn bi debugerek li dora xwe bimeşin (û em ji bîr mekin ku di wergera navnîşanê de nuans hene ku hîn jî pêdivî ye ku bi rengekî an yekî din werin çareser kirin), hûn dikarin bi hêsanî û pelê bişkînin. drivers/of/fdt.c amaje kirin #define pr_debug printk. Encam ev bû:
zêdekirina derana debugê
diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
index 3db0d71d128b..fac47df9d1db 100644
--- a/arch/riscv/kernel/setup.c
+++ b/arch/riscv/kernel/setup.c
@@ -173,6 +173,7 @@ asmlinkage void __init setup_vm(void)
void __init parse_dtb(unsigned int hartid, void *dtb)
{
+ printk("HART = %u DTB = %lxn", hartid, dtb);
early_init_dt_scan(__va(dtb));
}
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 74eaedd5b860..c019e4158e1d 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -940,10 +940,12 @@ struct device_node *of_find_node_by_type(struct device_node *from,
unsigned long flags;
raw_spin_lock_irqsave(&devtree_lock, flags);
- for_each_of_allnodes_from(from, np)
+ for_each_of_allnodes_from(from, np) {
+ printk("%lx %lx [%s] | [%s]n", from, np, np->type, type);
if (np->type && (of_node_cmp(np->type, type) == 0)
&& of_node_get(np))
break;
+ }
of_node_put(from);
raw_spin_unlock_irqrestore(&devtree_lock, flags);
return np;
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index 800ad252cf9c..2b45870ebada 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -31,6 +31,8 @@
#include "of_private.h"
+#define pr_debug printk
+
/*
* of_fdt_limit_memory - limit the number of regions in the /memory node
* @limit: maximum entries
@@ -1253,6 +1255,7 @@ bool __init early_init_dt_scan(void *params)
*/
void __init unflatten_device_tree(void)
{
+ printk("INITIAL: %lxn", initial_boot_params);
__unflatten_device_tree(initial_boot_params, NULL, &of_root,
early_init_dt_alloc_memory_arch, false);Derketina li ser hardware
SIFIVE, INC.
5555555555555555555555555
5555 5555
5555 5555
5555 5555
5555 5555555555555555555555
5555 555555555555555555555555
5555 5555
5555 5555
5555 5555
5555555555555555555555555555 55555
55555 555555555 55555
55555 55555 55555
55555 5 55555
55555 55555
55555 55555
55555 55555
55555 55555
55555 55555
555555555
55555
5
SiFive RISC-V Core IP
{
#address-cells = <0x00000001>;
#size-cells = <0x00000001>;
compatible = "freechips,rocketchip-unknown-dev";
model = "freechips,rocketchip-unknown";
chosen {
linux,initrd-start = <0x82000000>;
riscv,kernel-end = <0x81200000>;
riscv,kernel-start = <0x80200000>;
#address-cells = <0x00000001>;
#size-cells = <0x00000000>;
bootargs = <0x64656275 0x6720636f 0x6e736f6c 0x653d7474 0x79534946 0x302c3132 0x35323030 0x20726f6f 0x743d2f64 0x65762f6d 0x6d63626c 0x6b307032 0x206c6f67 0x6c657665 0x6c3d3720 0x726f6f74 0x77616974>;
}
firmware {
sifive,uboot = "YYYY-MM-DD";
}
aliases {
serial0 = <0x2f736f63 0x2f736572 0x69616c40 0x36343030 0x30303030>;
}
cpus {
#address-cells = <0x00000001>;
#size-cells = <0x00000000>;
cpu@0 {
device_type = "cpu";
clock-frequency = <0x00000000>;
compatible = "sifive,rocket0", "riscv";
d-cache-block-size = <0x00000010>;
d-cache-sets = <0x00000040>;
d-cache-size = <0x00001000>;
d-tlb-sets = <0x00000001>;
d-tlb-size = <0x00000020>;
i-cache-block-size = <0x00000010>;
i-cache-sets = <0x00000040>;
i-cache-size = <0x00001000>;
i-tlb-sets = <0x00000001>;
i-tlb-size = <0x00000020>;
mmu-type = "riscv,sv39";
next-level-cache = <0x00000001>;
reg = <0x00000000>;
riscv,isa = "rv64imafdc";
status = "okay";
timebase-frequency = <0x000f4240>;
tlb-split;
interrupt-controller {
#interrupt-cells = <0x00000001>;
compatible = "riscv,cpu-intc";
interrupt-controller;
phandle = <0x00000002>;
}
}
}
ram@80000000 {
device_type = "memory";
reg = <0x80000000 0x40000000>;
reg-names = "mem";
phandle = <0x00000001>;
}
soc {
#address-cells = <0x00000001>;
#size-cells = <0x00000001>;
compatible = "freechips,rocketchip-unknown-soc", "simple-bus";
ranges;
clint@2000000 {
compatible = "riscv,clint0";
interrupts-extended = <0x00000002 0x00000003 0x00000002 0x00000007>;
reg = <0x02000000 0x00010000>;
reg-names = "control";
}
debug-controller@0 {
compatible = "sifive,debug-013", "riscv,debug-013";
interrupts-extended = <0x00000002 0x0000ffff>;
reg = <0x00000000 0x00001000>;
reg-names = "control";
}
gpio@64002000 {
#gpio-cells = <0x00000002>;
#interrupt-cells = <0x00000002>;
compatible = "sifive,gpio0";
gpio-controller;
interrupt-controller;
interrupt-parent = <0x00000003>;
interrupts = <0x00000003 0x00000004 0x00000005 0x00000006 0x00000007 0x00000008>;
reg = <0x64002000 0x00001000>;
reg-names = "control";
}
interrupt-controller@c000000 {
#interrupt-cells = <0x00000001>;
compatible = "riscv,plic0";
interrupt-controller;
interrupts-extended = <0x00000002 0x0000000b 0x00000002 0x00000009>;
reg = <0x0c000000 0x04000000>;
reg-names = "control";
riscv,max-priority = <0x00000007>;
riscv,ndev = <0x00000008>;
phandle = <0x00000003>;
}
rom@10000 {
compatible = "sifive,maskrom0";
reg = <0x00010000 0x00002000>;
reg-names = "mem";
}
serial@64000000 {
compatible = "sifive,uart0";
interrupt-parent = <0x00000003>;
interrupts = <0x00000002>;
reg = <0x64000000 0x00001000>;
reg-names = "control";
}
spi@64001000 {
#address-cells = <0x00000001>;
#size-cells = <0x00000000>;
compatible = "sifive,spi0";
interrupt-parent = <0x00000003>;
interrupts = <0x00000001>;
reg = <0x64001000 0x00001000>;
reg-names = "control";
mmc@0 {
compatible = "mmc-spi-slot";
disable-wp;
reg = <0x00000000>;
spi-max-frequency = <0x01312d00>;
voltage-ranges = <0x00000ce4 0x00000ce4>;
}
}
tlclk {
#clock-cells = <0x00000000>;
clock-frequency = <0x017d7840>;
clock-output-names = "tlclk";
compatible = "fixed-clock";
}
}
}
[ 0.000000] HART = 0 DTB = 81200000
[ 0.000000] search "chosen", depth: 0, uname:
[ 0.000000] search "chosen", depth: 1, uname: chosen
[ 0.000000] Looking for initrd properties...
[ 0.000000] Command line is: debug console=ttySIF0,125200 root=/dev/mmcblk0p2 loglevel=7 rootwait
[ 0.000000] dt_root_size_cells = 1
[ 0.000000] dt_root_addr_cells = 1
[ 0.000000] memory scan node ram@80000000, reg size 8,
[ 0.000000] - 80000000 , 40000000
[ 0.000000] OF: fdt: Ignoring memory range 0x80000000 - 0x80200000
[ 0.000000] Linux version 4.19.0-sifive-1+ (trosinenko@trosinenko-pc) (gcc version 8.3.0 (Buildroot 2019.02-07449-g4eddd28f99)) #1 SMP Sat Jul 6 12:14:41 MSK 2019
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] DMA32 [mem 0x0000000080200000-0x00000000bfffffff]
[ 0.000000] Normal [mem 0x00000000c0000000-0x00000bffffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080200000-0x00000000bfffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080200000-0x00000000bfffffff]
[ 0.000000] INITIAL: ffffffe001000000
[ 0.000000] -> unflatten_device_tree()
[ 0.000000] Unflattening device tree:
[ 0.000000] magic: d00dfeed
[ 0.000000] size: 00001000
[ 0.000000] version: 00000011
[ 0.000000] size is 13512, allocating...
[ 0.000000] unflattening (____ptrval____)...
[ 0.000000] fixed up name for ->
[ 0.000000] fixed up name for chosen -> chosen
[ 0.000000] fixed up name for firmware -> firmware
[ 0.000000] fixed up name for aliases -> aliases
[ 0.000000] fixed up name for cpus -> cpus
[ 0.000000] fixed up name for cpu@0 -> cpu
[ 0.000000] fixed up name for interrupt-controller -> interrupt-controller
[ 0.000000] fixed up name for ram@80000000 -> ram
[ 0.000000] fixed up name for soc -> soc
[ 0.000000] fixed up name for clint@2000000 -> clint
[ 0.000000] fixed up name for debug-controller@0 -> debug-controller
[ 0.000000] fixed up name for gpio@64002000 -> gpio
[ 0.000000] fixed up name for interrupt-controller@c000000 -> interrupt-controller
[ 0.000000] fixed up name for rom@10000 -> rom
[ 0.000000] fixed up name for serial@64000000 -> serial
[ 0.000000] fixed up name for spi@64001000 -> spi
[ 0.000000] fixed up name for mmc@0 -> mmc
[ 0.000000] fixed up name for tlclk -> tlclk
[ 0.000000] <- unflatten_device_tree()
[ 0.000000] software IO TLB: mapped [mem 0xbb1fc000-0xbf1fc000] (64MB)
[ 0.000000] 0 ffffffe03effcab0 [attach() failed for %s with error %d
[ 0.000000] ] | [cpu]
[ 0.000000] 0 ffffffe03eff0020 [(null)] | [cpu]Derketina QEMU
SIFIVE, INC.
5555555555555555555555555
5555 5555
5555 5555
5555 5555
5555 5555555555555555555555
5555 555555555555555555555555
5555 5555
5555 5555
5555 5555
5555555555555555555555555555 55555
55555 555555555 55555
55555 55555 55555
55555 5 55555
55555 55555
55555 55555
55555 55555
55555 55555
55555 55555
555555555
55555
5
SiFive RISC-V Core IP
{
#address-cells = <0x00000002>;
#size-cells = <0x00000002>;
compatible = "riscv-virtio";
model = "riscv-virtio,qemu";
chosen {
linux,initrd-start = <0x00000000 0x88000000>;
linux,initrd-end = <0x00000000 0x88442b86>;
riscv,kernel-start = <0x00000000 0x80200000>;
riscv,kernel-end = <0x00000000 0x80c482ac>;
bootargs = "";
stdout-path = <0x2f756172 0x74403130 0x30303030>;
}
uart@10000000 {
interrupts = <0x0000000a>;
interrupt-parent = <0x00000002>;
clock-frequency = <0x00384000>;
reg = <0x00000000 0x10000000 0x00000000 0x00000100>;
compatible = "ns16550a";
}
test@100000 {
reg = <0x00000000 0x00100000 0x00000000 0x00001000>;
compatible = "sifive,test0";
}
virtio_mmio@10008000 {
interrupts = <0x00000008>;
interrupt-parent = <0x00000002>;
reg = <0x00000000 0x10008000 0x00000000 0x00001000>;
compatible = "virtio,mmio";
}
virtio_mmio@10007000 {
interrupts = <0x00000007>;
interrupt-parent = <0x00000002>;
reg = <0x00000000 0x10007000 0x00000000 0x00001000>;
compatible = "virtio,mmio";
}
virtio_mmio@10006000 {
interrupts = <0x00000006>;
interrupt-parent = <0x00000002>;
reg = <0x00000000 0x10006000 0x00000000 0x00001000>;
compatible = "virtio,mmio";
}
virtio_mmio@10005000 {
interrupts = <0x00000005>;
interrupt-parent = <0x00000002>;
reg = <0x00000000 0x10005000 0x00000000 0x00001000>;
compatible = "virtio,mmio";
}
virtio_mmio@10004000 {
interrupts = <0x00000004>;
interrupt-parent = <0x00000002>;
reg = <0x00000000 0x10004000 0x00000000 0x00001000>;
compatible = "virtio,mmio";
}
virtio_mmio@10003000 {
interrupts = <0x00000003>;
interrupt-parent = <0x00000002>;
reg = <0x00000000 0x10003000 0x00000000 0x00001000>;
compatible = "virtio,mmio";
}
virtio_mmio@10002000 {
interrupts = <0x00000002>;
interrupt-parent = <0x00000002>;
reg = <0x00000000 0x10002000 0x00000000 0x00001000>;
compatible = "virtio,mmio";
}
virtio_mmio@10001000 {
interrupts = <0x00000001>;
interrupt-parent = <0x00000002>;
reg = <0x00000000 0x10001000 0x00000000 0x00001000>;
compatible = "virtio,mmio";
}
cpus {
#address-cells = <0x00000001>;
#size-cells = <0x00000000>;
timebase-frequency = <0x00989680>;
cpu@0 {
device_type = "cpu";
reg = <0x00000000>;
status = "okay";
compatible = "riscv";
riscv,isa = "rv64imafdcsu";
mmu-type = "riscv,sv48";
clock-frequency = <0x3b9aca00>;
interrupt-controller {
#interrupt-cells = <0x00000001>;
interrupt-controller;
compatible = "riscv,cpu-intc";
linux,phandle = <0x00000001>;
phandle = <0x00000001>;
}
}
}
memory@80000000 {
device_type = "memory";
reg = <0x00000000 0x80000000 0x00000000 0x40000000>;
}
soc {
#address-cells = <0x00000002>;
#size-cells = <0x00000002>;
compatible = "simple-bus";
ranges;
pci@30000000 {
interrupt-map-mask = <0x00001800 0x00000000 0x00000000 0x00000007>;
interrupt-map = <0x00000000 0x00000000 0x00000000 0x00000001 0x00000002 0x00000020 0x00000000 0x00000000 0x00000000 0x00000002 0x00000002 0x00000021 0x00000000 0x00000000 0x00000000 0x00000003 0x00000002 0x00000022 0x00000000 0x00000000 0x00000000 0x00000004 0x00000002 0x00000023 0x00000800 0x00000000 0x00000000 0x00000001 0x00000002 0x00000021 0x00000800 0x00000000 0x00000000 0x00000002 0x00000002 0x00000022 0x00000800 0x00000000 0x00000000 0x00000003 0x00000002 0x00000023 0x00000800 0x00000000 0x00000000 0x00000004 0x00000002 0x00000020 0x00001000 0x00000000 0x00000000 0x00000001 0x00000002 0x00000022 0x00001000 0x00000000 0x00000000 0x00000002 0x00000002 0x00000023 0x00001000 0x00000000 0x00000000 0x00000003 0x00000002 0x00000020 0x00001000 0x00000000 0x00000000 0x00000004 0x00000002 0x00000021 0x00001800 0x00000000 0x00000000 0x00000001 0x00000002 0x00000023 0x00001800 0x00000000 0x00000000 0x00000002 0x00000002 0x00000020 0x00001800 0x00000000 0x00000000 0x00000003 0x00000002 0x00000021 0x00001800 0x00000000 0x00000000 0x00000004 0x00000002 0x00000022>;
ranges = <0x01000000 0x00000000 0x00000000 0x00000000 0x03000000 0x00000000 0x00010000 0x02000000 0x00000000 0x40000000 0x00000000 0x40000000 0x00000000 0x40000000>;
reg = <0x00000000 0x30000000 0x00000000 0x10000000>;
dma-coherent;
bus-range = <0x00000000 0x000002ff>;
linux,pci-domain = <0x00000000>;
device_type = "pci";
compatible = "pci-host-ecam-generic";
#size-cells = <0x00000002>;
#interrupt-cells = <0x00000001>;
#address-cells = <0x00000003>;
}
interrupt-controller@c000000 {
linux,phandle = <0x00000002>;
phandle = <0x00000002>;
riscv,ndev = <0x00000035>;
riscv,max-priority = <0x00000007>;
reg-names = "control";
reg = <0x00000000 0x0c000000 0x00000000 0x04000000>;
interrupts-extended = <0x00000001 0x0000000b 0x00000001 0x00000009>;
interrupt-controller;
compatible = "riscv,plic0";
#interrupt-cells = <0x00000001>;
#address-cells = <0x00000000>;
}
clint@2000000 {
interrupts-extended = <0x00000001 0x00000003 0x00000001 0x00000007>;
reg = <0x00000000 0x02000000 0x00000000 0x00010000>;
compatible = "riscv,clint0";
}
}
}
[ 0.000000] HART = 0 DTB = 80e00000
[ 0.000000] search "chosen", depth: 0, uname:
[ 0.000000] search "chosen", depth: 1, uname: chosen
[ 0.000000] Looking for initrd properties...
[ 0.000000] initrd_start=0x88000000 initrd_end=0x88442b86
[ 0.000000] Command line is: earlyprintk
[ 0.000000] dt_root_size_cells = 2
[ 0.000000] dt_root_addr_cells = 2
[ 0.000000] memory scan node memory@80000000, reg size 16,
[ 0.000000] - 80000000 , 40000000
[ 0.000000] OF: fdt: Ignoring memory range 0x80000000 - 0x80200000
[ 0.000000] Linux version 4.19.0-sifive-1+ (trosinenko@trosinenko-pc) (gcc version 8.3.0 (Buildroot 2019.02-07449-g4eddd28f99)) #1 SMP Sat Jul 6 12:14:41 MSK 2019
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] Initial ramdisk at: 0x(____ptrval____) (4467590 bytes)
[ 0.000000] Zone ranges:
[ 0.000000] DMA32 [mem 0x0000000080200000-0x00000000bfffffff]
[ 0.000000] Normal [mem 0x00000000c0000000-0x00000bffffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080200000-0x00000000bfffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080200000-0x00000000bfffffff]
[ 0.000000] INITIAL: ffffffe000c00000
[ 0.000000] -> unflatten_device_tree()
[ 0.000000] Unflattening device tree:
[ 0.000000] magic: d00dfeed
[ 0.000000] size: 00000d56
[ 0.000000] version: 00000011
[ 0.000000] size is 14192, allocating...
[ 0.000000] unflattening (____ptrval____)...
[ 0.000000] fixed up name for ->
[ 0.000000] fixed up name for chosen -> chosen
[ 0.000000] fixed up name for uart@10000000 -> uart
[ 0.000000] fixed up name for test@100000 -> test
[ 0.000000] fixed up name for virtio_mmio@10008000 -> virtio_mmio
[ 0.000000] fixed up name for virtio_mmio@10007000 -> virtio_mmio
[ 0.000000] fixed up name for virtio_mmio@10006000 -> virtio_mmio
[ 0.000000] fixed up name for virtio_mmio@10005000 -> virtio_mmio
[ 0.000000] fixed up name for virtio_mmio@10004000 -> virtio_mmio
[ 0.000000] fixed up name for virtio_mmio@10003000 -> virtio_mmio
[ 0.000000] fixed up name for virtio_mmio@10002000 -> virtio_mmio
[ 0.000000] fixed up name for virtio_mmio@10001000 -> virtio_mmio
[ 0.000000] fixed up name for cpus -> cpus
[ 0.000000] fixed up name for cpu@0 -> cpu
[ 0.000000] fixed up name for interrupt-controller -> interrupt-controller
[ 0.000000] fixed up name for memory@80000000 -> memory
[ 0.000000] fixed up name for soc -> soc
[ 0.000000] fixed up name for pci@30000000 -> pci
[ 0.000000] fixed up name for interrupt-controller@c000000 -> interrupt-controller
[ 0.000000] fixed up name for clint@2000000 -> clint
[ 0.000000] <- unflatten_device_tree()
[ 0.000000] software IO TLB: mapped [mem 0xbb1fc000-0xbf1fc000] (64MB)
[ 0.000000] 0 ffffffe03effc808 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effca78 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effcd98 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effd068 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effd230 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effd4b8 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effd740 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effd9c8 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effdc50 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effded8 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effe160 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effe3e8 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effe670 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effe888 [cpu] | [cpu]
[ 0.000000] ffffffe03effe888 ffffffe03effec00 [<NULL>] | [cpu]
[ 0.000000] ffffffe03effe888 ffffffe03effeee8 [memory] | [cpu]
[ 0.000000] ffffffe03effe888 ffffffe03efff0b0 [<NULL>] | [cpu]
[ 0.000000] ffffffe03effe888 ffffffe03efff320 [pci] | [cpu]
[ 0.000000] ffffffe03effe888 ffffffe03efff858 [<NULL>] | [cpu]
[ 0.000000] ffffffe03effe888 ffffffe03efffd58 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effc808 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effca78 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effcd98 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effd068 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effd230 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effd4b8 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effd740 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effd9c8 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effdc50 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effded8 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effe160 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effe3e8 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effe670 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effe888 [cpu] | [cpu]
[ 0.000000] elf_hwcap is 0x112d
[ 0.000000] percpu: Embedded 17 pages/cpu @(____ptrval____) s29400 r8192 d32040 u69632
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258055
[ 0.000000] Kernel command line: earlyprintk
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] Sorting __ex_table...
[ 0.000000] Memory: 949716K/1046528K available (6565K kernel code, 342K rwdata, 2564K rodata, 208K init, 832K bss, 96812K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0
[ 0.000000] plic: mapped 53 interrupts to 2 (out of 2) handlers.
[ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] bootconsole [early0] disabled
[ 0.000000] HART = 0 DTB = 80e00000
[ 0.000000] search "chosen", depth: 0, uname:
[ 0.000000] search "chosen", depth: 1, uname: chosen
[ 0.000000] Looking for initrd properties...
[ 0.000000] initrd_start=0x88000000 initrd_end=0x88442b86
[ 0.000000] Command line is: earlyprintk
[ 0.000000] dt_root_size_cells = 2
[ 0.000000] dt_root_addr_cells = 2
[ 0.000000] memory scan node memory@80000000, reg size 16,
[ 0.000000] - 80000000 , 40000000
[ 0.000000] OF: fdt: Ignoring memory range 0x80000000 - 0x80200000
[ 0.000000] Linux version 4.19.0-sifive-1+ (trosinenko@trosinenko-pc) (gcc version 8.3.0 (Buildroot 2019.02-07449-g4eddd28f99)) #1 SMP Sat Jul 6 12:14:41 MSK 2019
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] Initial ramdisk at: 0x(____ptrval____) (4467590 bytes)
[ 0.000000] Zone ranges:
[ 0.000000] DMA32 [mem 0x0000000080200000-0x00000000bfffffff]
[ 0.000000] Normal [mem 0x00000000c0000000-0x00000bffffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080200000-0x00000000bfffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080200000-0x00000000bfffffff]
[ 0.000000] INITIAL: ffffffe000c00000
[ 0.000000] -> unflatten_device_tree()
[ 0.000000] Unflattening device tree:
[ 0.000000] magic: d00dfeed
[ 0.000000] size: 00000d56
[ 0.000000] version: 00000011
[ 0.000000] size is 14192, allocating...
[ 0.000000] unflattening (____ptrval____)...
[ 0.000000] fixed up name for ->
[ 0.000000] fixed up name for chosen -> chosen
[ 0.000000] fixed up name for uart@10000000 -> uart
[ 0.000000] fixed up name for test@100000 -> test
[ 0.000000] fixed up name for virtio_mmio@10008000 -> virtio_mmio
[ 0.000000] fixed up name for virtio_mmio@10007000 -> virtio_mmio
[ 0.000000] fixed up name for virtio_mmio@10006000 -> virtio_mmio
[ 0.000000] fixed up name for virtio_mmio@10005000 -> virtio_mmio
[ 0.000000] fixed up name for virtio_mmio@10004000 -> virtio_mmio
[ 0.000000] fixed up name for virtio_mmio@10003000 -> virtio_mmio
[ 0.000000] fixed up name for virtio_mmio@10002000 -> virtio_mmio
[ 0.000000] fixed up name for virtio_mmio@10001000 -> virtio_mmio
[ 0.000000] fixed up name for cpus -> cpus
[ 0.000000] fixed up name for cpu@0 -> cpu
[ 0.000000] fixed up name for interrupt-controller -> interrupt-controller
[ 0.000000] fixed up name for memory@80000000 -> memory
[ 0.000000] fixed up name for soc -> soc
[ 0.000000] fixed up name for pci@30000000 -> pci
[ 0.000000] fixed up name for interrupt-controller@c000000 -> interrupt-controller
[ 0.000000] fixed up name for clint@2000000 -> clint
[ 0.000000] <- unflatten_device_tree()
[ 0.000000] software IO TLB: mapped [mem 0xbb1fc000-0xbf1fc000] (64MB)
[ 0.000000] 0 ffffffe03effc808 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effca78 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effcd98 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effd068 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effd230 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effd4b8 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effd740 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effd9c8 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effdc50 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effded8 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effe160 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effe3e8 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effe670 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effe888 [cpu] | [cpu]
[ 0.000000] ffffffe03effe888 ffffffe03effec00 [<NULL>] | [cpu]
[ 0.000000] ffffffe03effe888 ffffffe03effeee8 [memory] | [cpu]
[ 0.000000] ffffffe03effe888 ffffffe03efff0b0 [<NULL>] | [cpu]
[ 0.000000] ffffffe03effe888 ffffffe03efff320 [pci] | [cpu]
[ 0.000000] ffffffe03effe888 ffffffe03efff858 [<NULL>] | [cpu]
[ 0.000000] ffffffe03effe888 ffffffe03efffd58 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effc808 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effca78 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effcd98 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effd068 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effd230 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effd4b8 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effd740 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effd9c8 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effdc50 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effded8 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effe160 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effe3e8 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effe670 [<NULL>] | [cpu]
[ 0.000000] 0 ffffffe03effe888 [cpu] | [cpu]
[ 0.000000] elf_hwcap is 0x112d
[ 0.000000] percpu: Embedded 17 pages/cpu @(____ptrval____) s29400 r8192 d32040 u69632
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258055
[ 0.000000] Kernel command line: earlyprintk
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] Sorting __ex_table...
[ 0.000000] Memory: 949716K/1046528K available (6565K kernel code, 342K rwdata, 2564K rodata, 208K init, 832K bss, 96812K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0
[ 0.000000] plic: mapped 53 interrupts to 2 (out of 2) handlers.
[ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] bootconsole [early0] disabled
[ 0.000000] Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=100000)
[ 0.000000] pid_max: default: 32768 minimum: 301
[ 0.000000] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.000000] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.020000] rcu: Hierarchical SRCU implementation.
[ 0.020000] smp: Bringing up secondary CPUs ...
[ 0.020000] smp: Brought up 1 node, 1 CPU
[ 0.050000] devtmpfs: initialized
[ 0.050000] 0 ffffffe03effc808 [<NULL>] | [cpu]
[ 0.050000] 0 ffffffe03effca78 [<NULL>] | [cpu]
[ 0.050000] 0 ffffffe03effcd98 [<NULL>] | [cpu]
[ 0.050000] 0 ffffffe03effd068 [<NULL>] | [cpu]
[ 0.050000] 0 ffffffe03effd230 [<NULL>] | [cpu]
[ 0.050000] 0 ffffffe03effd4b8 [<NULL>] | [cpu]
[ 0.050000] 0 ffffffe03effd740 [<NULL>] | [cpu]
[ 0.050000] 0 ffffffe03effd9c8 [<NULL>] | [cpu]
[ 0.050000] 0 ffffffe03effdc50 [<NULL>] | [cpu]
[ 0.050000] 0 ffffffe03effded8 [<NULL>] | [cpu]
[ 0.050000] 0 ffffffe03effe160 [<NULL>] | [cpu]
[ 0.050000] 0 ffffffe03effe3e8 [<NULL>] | [cpu]
[ 0.050000] 0 ffffffe03effe670 [<NULL>] | [cpu]
[ 0.050000] 0 ffffffe03effe888 [cpu] | [cpu]
[ 0.050000] random: get_random_u32 called from bucket_table_alloc+0x76/0x17a with crng_init=0
[ 0.050000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.050000] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.060000] NET: Registered protocol family 16
[ 0.090000] vgaarb: loaded
[ 0.090000] SCSI subsystem initialized
[ 0.090000] usbcore: registered new interface driver usbfs
[ 0.090000] usbcore: registered new interface driver hub
[ 0.090000] usbcore: registered new device driver usb
[ 0.090000] pps_core: LinuxPPS API ver. 1 registered
[ 0.090000] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 0.090000] PTP clock support registered
[ 0.100000] Advanced Linux Sound Architecture Driver Initialized.
[ 0.100000] clocksource: Switched to clocksource riscv_clocksource
[ 0.110000] NET: Registered protocol family 2
[ 0.110000] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes)
[ 0.110000] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.110000] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.110000] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.110000] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.110000] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.110000] NET: Registered protocol family 1
[ 0.120000] Unpacking initramfs...
[ 0.590000] workingset: timestamp_bits=62 max_order=18 bucket_order=0
[ 0.620000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.620000] io scheduler noop registered
[ 0.620000] io scheduler deadline registered
[ 0.620000] io scheduler cfq registered (default)
[ 0.620000] io scheduler mq-deadline registered
[ 0.620000] io scheduler kyber registered
[ 0.620000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.690000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.690000] 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 10, base_baud = 230400) is a 16550A
[ 0.720000] console [ttyS0] enabled
[ 0.720000] [drm] radeon kernel modesetting enabled.
[ 0.720000] [drm] amdgpu kernel modesetting enabled.
[ 0.730000] loop: module loaded
[ 0.730000] libphy: Fixed MDIO Bus: probed
[ 0.740000] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 0.740000] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.740000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.740000] ehci-pci: EHCI PCI platform driver
[ 0.740000] ehci-platform: EHCI generic platform driver
[ 0.740000] mousedev: PS/2 mouse device common for all mice
[ 0.740000] usbcore: registered new interface driver usbhid
[ 0.740000] usbhid: USB HID core driver
[ 0.740000] usbcore: registered new interface driver snd-usb-audio
[ 0.740000] NET: Registered protocol family 10
[ 0.750000] Segment Routing with IPv6
[ 0.750000] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 0.750000] NET: Registered protocol family 17
[ 0.750000] Key type dns_resolver registered
[ 0.760000] ALSA device list:
[ 0.760000] No soundcards found.
[ 0.770000] Freeing unused kernel memory: 208K
[ 0.770000] This architecture does not have kernel memory protection.
[ 0.770000] Run /init as init process(Rêzên "Dem-qeydkirî" ji hêla kernelê ve têne derxistin, li pêşiya wan dara ji hêla BBL ve tê derxistin) Ji aliyekê ve FDT bi serfirazî tê xwendin, ji hêla din ve, di parskirinê de celebek bêaqilî tête peyda kirin. obje” dar.
Di dema pêvajoya xeletkirinê de, min fêm kir ku BBL nikare navnîşana "du qat" bixwîne, ne ji ber ku di mîhengê de xeletiyek hebû, lê tenê ji ber ku girêka root xwediyê wê bû. #address-cells = <1>; #size-cells = <1>;.
Berfirehkirina derana debugê, min ew nîşanker dît type и name "lêdan", û bi awayek ecêb: yekem byta wan (ji sifirê dest pê dike) ji sifirê hate vegerandin, tiştek mîna 0xabcdef -> 0xab00ef. Ez neçar bûm ku taktîkek naskirî bikar bînim: zanîna navnîşanên ku bîranîna xerabûyî lê ye, wê li fonksiyonê zêde bike printk vê daneyê çap bike. Belê, dijwarî bixwe printk wan li cihê ku hindik in belav bikin. Mixabin, ew pir zelal nebûye. Dûv re min dest pê kir, şêwra jihevdexistinê objdump guhertoya, bi destan xalên veqetandinê destnîşan bikin û gav bi gav beşa pirsgirêkê ya kodê derbas bikin. Û dûv re tiştek nepenî û ne xweş hat kifş kirin: ger ez tavilê li deverek ji rewşa naskirî-baş dûr nuqteyek veqetînim, wê hingê, li ser wê rawestim, ez ê bîranîna jixwe zirardar bibînim. Lê heke hûn hewl bidin ku bi bêdengî gav bi gav li ser wê bizivirin, xeletî xwe vedişêre! Ew bîhnek wekî kontrolkerek bîranîna şikestî û cache ye ku heke hûn bi berdewamî nirxa pêwîst daxwaz bikin, xeletiyê vedişêre. Çi eger…
Li şûna bîranînê
Bi fersendê ve girêda ku ez pirsgirêkek ku ne li ser milê min bû çareser bikim, min texmîn kir ku dibe ku min tenê çîçek bîranînek şikestî wergirtibe. Dûv re hat bîra min ku netbookek deh-salî ne tenê komputerek portable e, lê di heman demê de çavkaniyek hêja ya DDR2 SO-DIMM e. Wekî bonus, hûn dikarin bîranîna ku ji panelê hatî derxistin têxin nav wê û Memtest-ê hema tavilê daliqînin (Linux, bi awayê, hema hema li qalika grafîkî hatî barkirin. Lê çêtir e ku hûn vê ceribandinê dubare nekin ger hûn agahdariya li ser dîskên siwarkirî binirxînin…). Ji aliyek ve, em dikarin texmîn bikin ku bîranîn bi tenê li gorî vê netbook-a taybetî nebû. Ji aliyê din ve, wî karîbû boot bike! Hêvî hebû ku bîranîn bi tenê "şikestî" bû, û pirsgirêk ne di pêça min de bû.
Ev tê vê wateyê ku hûn hewce ne ku hewl bidin ku bi bîranîna netbook-ê re demkî dest pê bikin. Mixabin, Quartus 18 nizane meriv çawa vê IP Core nûve bike da ku ew were guherandin. Ev tê vê wateyê ku dem di dawiyê de hatiye ku meriv fêr bibe ka meriv çawa mînakên nû biafirîne. Her tişt pir hêsan derket holê: em di Kataloga IP-yê de li tiştê Kontrolkerê DDR2 SDRAM bi ALTMEMPHY Intel FPGA IP-yê digerin û em blokek bi heman navgîniya berê digirin. Pirsgirêk tenê danîna mîhengên bîranîna rast e.
Danîna pîvanên modula bîranînê
Ji bo mîhengkirina modulê rêyek berbiçav heye: Parametreyên ji SPD bixwînin. Bi rastî, heke komputerek asayî daneyên SPD-ê dixwîne û li gorî wê kontrolkerê mîheng dike, wê hingê bila em van daneyan li ser netbookek heyî jê bikin û têkevin tabloyek.
Ev li ser Ubuntu tê kirin : divê hûn pakêtê saz bikin i2c-tools, modulên barkirinê eeprom и i2c-i801 (Lêbelê ez ne bawer im ku ajokarê duyemîn dê li her deverê bixebite), paşê birevin decode-dimms:
deşîfre-dimms derket
# decode-dimms version 6231 (2014-02-20 10:54:34 +0100)
Memory Serial Presence Detect Decoder
By Philip Edelbrock, Christian Zuckschwerdt, Burkart Lingner,
Jean Delvare, Trent Piepho and others
Decoding EEPROM: /sys/bus/i2c/drivers/eeprom/0-0050
Guessing DIMM is in bank 1
---=== SPD EEPROM Information ===---
EEPROM Checksum of bytes 0-62 OK (0x00)
SPD Revision Invalid
Fundamental Memory type Unknown (0x00)
---=== Manufacturing Information ===---
Manufacturer Undefined
Part Number Undefined
Decoding EEPROM: /sys/bus/i2c/drivers/eeprom/4-0050
Guessing DIMM is in bank 1
---=== SPD EEPROM Information ===---
EEPROM Checksum of bytes 0-62 OK (0x00)
SPD Revision Invalid
Fundamental Memory type Unknown (0x00)
---=== Manufacturing Information ===---
Manufacturer Undefined
Part Number Undefined
Decoding EEPROM: /sys/bus/i2c/drivers/eeprom/6-0050
Guessing DIMM is in bank 1
---=== SPD EEPROM Information ===---
EEPROM Checksum of bytes 0-62 OK (0x76)
# of bytes written to SDRAM EEPROM 128
Total number of bytes in EEPROM 256
Fundamental Memory type DDR2 SDRAM
SPD Revision 1.2
---=== Memory Characteristics ===---
Maximum module speed 800 MHz (PC2-6400)
Size 1024 MB
Banks x Rows x Columns x Bits 8 x 13 x 10 x 64
Ranks 2
SDRAM Device Width 16 bits
Module Height 30.0 mm
Module Type SO-DIMM (67.6 mm)
DRAM Package Planar
Voltage Interface Level SSTL 1.8V
Module Configuration Type No Parity
Refresh Rate Reduced (7.8 us) - Self Refresh
Supported Burst Lengths 4, 8
tCL-tRCD-tRP-tRAS 6-6-6-18
Supported CAS Latencies (tCL) 6T, 5T, 4T
Minimum Cycle Time 2.50 ns at CAS 6 (tCK min)
3.00 ns at CAS 5
3.75 ns at CAS 4
Maximum Access Time 0.40 ns at CAS 6 (tAC)
0.45 ns at CAS 5
0.50 ns at CAS 4
Maximum Cycle Time (tCK max) 8.00 ns
---=== Timing Parameters ===---
Address/Command Setup Time Before Clock (tIS) 0.17 ns
Address/Command Hold Time After Clock (tIH) 0.25 ns
Data Input Setup Time Before Strobe (tDS) 0.05 ns
Data Input Hold Time After Strobe (tDH) 0.12 ns
Minimum Row Precharge Delay (tRP) 15.00 ns
Minimum Row Active to Row Active Delay (tRRD) 10.00 ns
Minimum RAS# to CAS# Delay (tRCD) 15.00 ns
Minimum RAS# Pulse Width (tRAS) 45.00 ns
Write Recovery Time (tWR) 15.00 ns
Minimum Write to Read CMD Delay (tWTR) 7.50 ns
Minimum Read to Pre-charge CMD Delay (tRTP) 7.50 ns
Minimum Active to Auto-refresh Delay (tRC) 60.00 ns
Minimum Recovery Delay (tRFC) 127.50 ns
Maximum DQS to DQ Skew (tDQSQ) 0.20 ns
Maximum Read Data Hold Skew (tQHS) 0.30 ns
---=== Manufacturing Information ===---
Manufacturer Samsung
Manufacturing Location Code 0x02
Part Number M4 70T2864QZ3-CF7
Revision Code 0x3351
Manufacturing Date 2009-W34
Assembly Serial Number 0x79C64E9A
Number of SDRAM DIMMs detected and decoded: 3Pirsgirêk ev e ku hin dem li vir nayên destnîşan kirin, ji ber vê yekê em riya duyemîn bigirin.
Li ser modulên me çi hatî nivîsandin:
Di vê rewşê de, nivîsandina li ser çîpên bîranînê bixwe balkêştir e: K4T1G164QQ-HCF7. Bi nivîsandina vê rêzê li Google-ê, em danehevek ji çend dehan rûpelan bi hemî pîvanên pêwîst digirin, ku dikarin bi rengek xweş di nav taybetmendiyên IP Core de bêne bicîh kirin. Tenê bala xwe bidin yekîneyên pîvanê: li cîhek ns, cihekî - ps, û carinan jî parve dike tCK. Ez ê fêrî we nekim ku hûn bala xwe bidinê - Min bi xwe gelek tişt bi rasthatinî mîheng kirin (ez nikarim garantî bikim ku hûn nikanin bîranîn an FPGA bi vî rengî "şewitînin"). Ez ê tenê bala we bikişînim ser vê yekê: Min nikarîbû kontrolker ji bo demek pir dirêj bixebitim, û gava paşîn ev bû ku ez hewce bikim ku firehiya hemî navberên bîranînê ji bo lihevhatina koda Verilog-ê ya çêkirî kontrol bikim. : piştî her tiştî, dema ku tê MemIfBundle diyar kirin val mem_ba = IO(Output(UInt(2.W))), û 8 bank hene (ango navnîşanek 3 bit fireh), wê hingê ya ku me heye ew e ku encamek ji kontrolkera bîranînê ya ku li hewayê daliqandî ye - pirsgirêkek, lê ne krîtîk, ji ber vê yekê her tişt tê sentez kirin, lê nexebite.
Dibe ku ger kontrolker were nûve kirin dê her tişt bi modula kevn re bixebite, lê ji bo naha ez pir tembel im ku ez bi xeletiyên potansiyel ên potansiyel re mijûl bibim: Ji xwe têra min heye.
Ji ber vê yekê, piştî ku diçin timebase-frequency di DTS de ji asta CPU ya taybetî heya asta girêk cpus (li gorî daxwaza pir têgihîştî ya kernelê), em distînin:
Nivîsa veşartî
[ 0.000000] OF: fdt: Ignoring memory range 0x80000000 - 0x80200000
[ 0.000000] Linux version 4.19.0-sifive-1+ (trosinenko@trosinenko-pc) (gcc version 8.3.0 (Buildroot 2019.02-07449-g4eddd28f99)) #1 SMP Tue Jul 9 22:42:36 MSK 2019
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] Initial ramdisk at: 0x(____ptrval____) (16777216 bytes)
[ 0.000000] Zone ranges:
[ 0.000000] DMA32 [mem 0x0000000080200000-0x00000000bfffffff]
[ 0.000000] Normal [mem 0x00000000c0000000-0x00000bffffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080200000-0x00000000bfffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080200000-0x00000000bfffffff]
[ 0.000000] software IO TLB: mapped [mem 0xbb1fc000-0xbf1fc000] (64MB)
[ 0.000000] elf_hwcap is 0x112d
[ 0.000000] percpu: Embedded 17 pages/cpu @(____ptrval____) s29400 r8192 d32040 u69632
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258055
[ 0.000000] Kernel command line: debug console=ttySIF0,125200 root=/dev/mmcblk0p2 loglevel=7 rootwait
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] Sorting __ex_table...
[ 0.000000] Memory: 937696K/1046528K available (6565K kernel code, 343K rwdata, 2564K rodata, 208K init, 832K bss, 108832K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0
[ 0.000000] plic: mapped 8 interrupts to 1 (out of 2) handlers.
[ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 3526361616960 ns
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
[ 0.020000] pid_max: default: 32768 minimum: 301
[ 0.030000] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.040000] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.140000] rcu: Hierarchical SRCU implementation.
[ 0.190000] smp: Bringing up secondary CPUs ...
[ 0.190000] smp: Brought up 1 node, 1 CPU
[ 0.220000] devtmpfs: initialized
[ 0.300000] random: get_random_u32 called from bucket_table_alloc+0x76/0x17a with crng_init=0
[ 0.330000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.340000] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.380000] NET: Registered protocol family 16
[ 1.850000] vgaarb: loaded
[ 1.870000] SCSI subsystem initialized
[ 1.900000] usbcore: registered new interface driver usbfs
[ 1.910000] usbcore: registered new interface driver hub
[ 1.920000] usbcore: registered new device driver usb
[ 1.930000] pps_core: LinuxPPS API ver. 1 registered
[ 1.940000] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 1.950000] PTP clock support registered
[ 1.970000] Advanced Linux Sound Architecture Driver Initialized.
[ 2.010000] clocksource: Switched to clocksource riscv_clocksource
[ 2.600000] NET: Registered protocol family 2
[ 2.640000] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes)
[ 2.650000] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 2.670000] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 2.700000] TCP: Hash tables configured (established 8192 bind 8192)
[ 2.720000] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 2.730000] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 2.750000] NET: Registered protocol family 1
[ 2.770000] Unpacking initramfs...
[ 23.980000] Initramfs unpacking failed: junk in compressed archive
[ 24.030000] workingset: timestamp_bits=62 max_order=18 bucket_order=0
[ 25.020000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 25.030000] io scheduler noop registered
[ 25.040000] io scheduler deadline registered
[ 25.050000] io scheduler cfq registered (default)
[ 25.060000] io scheduler mq-deadline registered
[ 25.060000] io scheduler kyber registered
[ 25.120000] sifive_gpio 64002000.gpio: SiFive GPIO chip registered 6 GPIOs
[ 25.150000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 28.870000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 28.940000] sifive-serial 64000000.serial: unable to find controller clock
[ 28.950000] sifive-serial: probe of 64000000.serial failed with error -2
[ 28.980000] [drm] radeon kernel modesetting enabled.
[ 28.990000] [drm] amdgpu kernel modesetting enabled.
[ 29.500000] loop: module loaded
[ 29.610000] sifive_spi 64001000.spi: Unable to find bus clock
[ 29.620000] sifive_spi: probe of 64001000.spi failed with error -2
[ 29.640000] libphy: Fixed MDIO Bus: probed
[ 29.680000] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 29.690000] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 29.700000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 29.710000] ehci-pci: EHCI PCI platform driver
[ 29.720000] ehci-platform: EHCI generic platform driver
[ 29.750000] mousedev: PS/2 mouse device common for all mice
[ 29.790000] usbcore: registered new interface driver usbhid
[ 29.800000] usbhid: USB HID core driver
[ 29.820000] usbcore: registered new interface driver snd-usb-audio
[ 29.900000] NET: Registered protocol family 10
[ 29.960000] Segment Routing with IPv6
[ 29.960000] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 30.020000] NET: Registered protocol family 17
[ 30.020000] Key type dns_resolver registered
[ 30.070000] bootconsole [early0] uses init memory and must be disabled even before the real one is ready
[ 30.080000] bootconsole [early0] disabledPiştî vê yekê tiştek xuya nabe.
Naha hûn dikarin hewl bidin ku bi sê pirsgirêkan re mijûl bibin:
[ 23.980000] Initramfs unpacking failed: junk in compressed archive
...
[ 28.940000] sifive-serial 64000000.serial: unable to find controller clock
...
[ 29.610000] sifive_spi 64001000.spi: Unable to find bus clock...û di heman demê de derketina ji konsolê jî disekine.
Serketina du pirsgirêkan bi frekansan re qet ne dijwar e: hûn hewce ne ku xalan lê zêde bikin clocks di bin darên amûrên pêwîst de, ji bo rehetiyê navek etîketek zelal ji bo girêkê dide tlclk:
diff --git a/arch/riscv/dts/zeowaa-1gb.dts b/arch/riscv/dts/zeowaa-1gb.dts
index 4b2cebc..1347e76 100644
--- a/arch/riscv/dts/zeowaa-1gb.dts
+++ b/arch/riscv/dts/zeowaa-1gb.dts
@@ -96,6 +97,7 @@
L8: serial@64000000 {
compatible = "sifive,uart0";
interrupt-parent = <&L0>;
+ clocks = <&tlclk>;
interrupts = <2>;
reg = <0x64000000 0x1000>;
reg-names = "control";
@@ -107,6 +109,7 @@
interrupt-parent = <&L0>;
interrupts = <1>;
reg = <0x64001000 0x1000>;
+ clocks = <&tlclk>;
reg-names = "control";
L12: mmc@0 {
compatible = "mmc-spi-slot";
@@ -116,7 +119,7 @@
voltage-ranges = <3300 3300>;
};
};
- L11: tlclk {
+ tlclk: tlclk {
#clock-cells = <0>;
clock-frequency = <25000000>;
clock-output-names = "tlclk";Bi lêzêdekirina rêzê #define pr_debug printk heta destpêka pelê init/initramfs.c, ku li şûna initramfs peyamek li ser çopê nîşan dide, em peyamek hinekî berfirehtir digirin:
[ 2.760000] Unpacking initramfs...
[ 2.770000] Detected gzip compressed data
[ 23.940000] Detected (null) compressed data
[ 23.970000] Initramfs unpacking failed: junk in compressed archiveYanî belkî çopê ne li gorî initramfs, û вместе.
Baş e, wî tiştek dît, belkî bes e. Konsol çû ku derê? Lêgerîn li ser Github lînkek pirsgirêkê dide: - Derket holê ku UART tenê, li gorî ajokar, ne hêjayî axaftinê ye. Lebê 11 Tîrmeh 2018 - salek berê. Derket holê ku ev peywir tu carî neketine dara ku ez jê re kernel çêdikim. Bi sepandina vê paçê bi destan, min Linuxek xebitî stend! Derket holê ku pirsgirêka initramfs bi rastî ne krîtîk bû.
Têkeve wekî bikarhêner = root, şîfre = sifive, min karî bê pirsgirêk (ji bilî têgihîştina ku hejmara GPIO bingehek heye, ku her tişt jê tê hesibandin, û ya ku tenê pêdivî ye ku ji pseudo-pelê têkildar were xwendin) bi rêya sysfs ronahiya LED li ser panelê.
Mîna cara paşîn, ez vîdyoyek nivîsê ya destpêkirina Linux ve girêdidim. Gava ku konsol ji zû-printk-ê diguhezîne ya standard, celebek çopê xuya dibe, mîna derketinê dema ku leza UART bi xeletî were danîn. Balkêş e, lîstikvan bi serketî di nav vê "tevliheviyê" de xebitî.
Source: www.habr.com