🥇Cryptographic workstation based on public key signs for the Android platform

Tempus est demonstrare quomodo cryptographic workstation fundatur in signis publicis clavis cryptoarmpkcs operatur in unum tabulatorum mobilium, scilicet Android.

Notio, quae proponitur, cum utilitas cryptoarmpkcs explicatur, est ut utentis minimum incommodum experiatur cum subscriptione electronic creando et comprobando. Quam ob rem proposuimus utens signis cryptographicis tamquam tabellarius clavem ad libellum personale PKCS#11 et / vel secure vasa PKCS#12. Dicendum est usum PKCS#12 in multis casibus evenire fere solum posse, exempli gratia, cum eadem PKCS #11 signa certis suggestis fulciantur. Itaque cryptoarmpkcs utilitates ad Android suggestum cum auxilio pro PKCS #12 vasis munitis incipere constituimus.

Statim notemus quod, cum consilium in suggestu C et Tcl/Tk factum sit, portatio nullas praecipuas difficultates effecit. Hoc factum technologiae gratiarum actione fieri potest Androwish. Cum explicans erigens amet Nullae quaestiones fuerunt (meae ambitus operandi est Linux - Mageia-7.0). Scriptum unum tantum dabo ad instrumenta Imperii Android explicandi (sdk-tools-linux-xxxx.zip);

#!/bin/sh
if [ $# -ne 1   ]
    then 
	echo "./InstallAndroidSDK.sh <sdk-tools-linux-xxxxxxxx.zip>"
	echo "Не указан архив или число параметров больше 1"
	exit 1
fi
if [ ! -f $1 ]
    then 
	echo "./InstallAndroidSDK.sh <sdk-tools-linux-xxxxxxxx.zip>"
	echo "архив $1 отсутствует"
	exit 1
fi
#Распаковываем SDK-TOOLS в папку tools
#unzip sdk-tools-linux-4333796.zip
unzip $1
#Создаем папку android-sdk-linux
mkdir android-sdk-linux
#Перемещвем папку tools в android-sdk-linux
mv tools android-sdk-linux
cd android-sdk-linux/tools/bin
./sdkmanager "platform-tools" "platforms;android-29"

Maxime memorabile est quod ambitus Androwish duos interpretes comprehendit, undrowish-xxx et vanillawish-xxx, qui omnino idem sunt in compositione cum "balalaikas" (packages) in ipsa Androwish. Differentia inter undrowish et vanillawish est quod vanillawish habet SDL/AGG/freetypum secundum backend:

Praesens harum duarum utilitatum permittit tibi applicationem evolvere quin ipsum Android et ipsum emulatorem cum maximo approximatione ad realem machinam accedat. Inprimis hoc, utique, undro- xxx.

Sarcina actualis consuetudo pro Android aedificatur in ambitu AWSDK. Proiectum tuum arbor movenda est ad folder ~/AWSDK/res/app. Hoc in casu, principalis moduli propositi tui renominandus est ad main.tcl. Si balalaikas additis cum dynamicis bibliothecis uteris, bibliothecae ponendae sunt in folders ~/AWSDK/libs/x86 pro aemulo et ~/AWSDK/libs/armeabi pro reali fabrica.

Post hoc, mox percurre mandatum;

$wish ~/AWSDK/tools/bones

sequere mandata;

In sarcina collecta apk in ~/AWSDK/aedifica/outputs/apk folder collocabuntur.

Si veram machinam vel aemulatorem coniunctam habes, sarcina statim institui potest.
In hoc casu, ratio realis in lusione debet esse.

Sed ad ipsam applicationem redeamus. Quid in eo mutandum erat?

Naturaliter mutationes principaliter ad magnitudinem ductilis pertinent. I had to redesign the main (initium fenestrae). Quam ob rem pro una fenestra in computatorio iusto;

Tres fenestrae in Android apparuit:

Prima fenestra informativum est. Conventio, in plures partes divisa. Prima pars, in summo sita, nomen utilitatem et logon continet.

Proximum est scriptor logo, informationes charta et tres globuli paginam complent.
Pagina scripta est utens carbaso componens. Pagina duo genera globulis utitur: unum in rectanguli translucentis (medii), alterum in rectanguli forma cum angulis rotundatis. A balalaika est creare bullarum rotundatis angulis tkpath. Personaliter, haec balalaika valde me impressionem fecit. Geometria scilicet, cum pellibus laborat, partem leonis codicis sumit. Infra scriptum est creare_titul_page.tcl primam paginam applicationis creare. Quisquis eam recensere potest ad propriam visionem accommodatam.

Scriptor create_titul_page.tcl

package require Tk
package require tkpath 0.3.0
global mydir
set mydir [file dirname [info script]]
#Грузим картинки
#Логотип продукта
image create photo logo_product -file [file join $mydir "imageme" "validcertkey_51x24.png"] 
#Логотип производителя
image create photo logo_orel -file [file join $mydir "imageme" "я_орел_425x200.png"] -format "png -alpha 1.0"
#Андроида с tcl/tk
image create photo logo_and -file [file join $mydir "imageme" "AndTk_inv_147x173.png"] -format "png -alpha 1.0"
#Свиток опечатанный
image create photo svitok -file [file join $mydir "imageme" "blue_svitok.png"] -format "png -alpha 1.0"
#Плитка
image create photo tileand -file [file join $mydir "imageme" "tile_green_and_32x32.png"] -format "png -alpha 1.0"
#Увеличить/уменьшить (отрицательное значение - уменьшение)
proc scaleImage {im xfactor {yfactor 0}} {
set mode -subsample
if {$xfactor>=0 && $yfactor>=0} {
set mode -zoom
} else {
set xfactor [expr $xfactor * -1]
}
if {$yfactor == 0} {set yfactor $xfactor}
set t [image create photo]
$t copy $im
$im blank
$im copy $t -shrink $mode $xfactor $yfactor
image delete $t
}
proc createtile {w  backg} {
image create photo tiled
tiled copy $backg -to 0 0 $::scrwidth $::scrheight -shrink
$backg copy tiled
image delete tiled
# Мостим холст
$w create image 0 0  
-image $backg  
-anchor nw
}
proc create_rectangle  {canv img x1 y1 x2 y2 color alfa {wbd 0} {colorline black} } {
image create photo $img -format "default -colorformat  rgb"
set rgb1 [winfo rgb $canv $color]
set cr  [lindex $rgb1 0]
set cg  [lindex $rgb1 1]
set cb  [lindex $rgb1 2]
set fill [format "#%04x%04x%04x" $cr $cg $cb ]
#Создаем цветной праямоугольник
$img put $fill -to 0 0 [expr {$x2 - $x1}] [expr {$y2 -$y1}]
#Сохраняем картинку
set dimg [$img data -format png]
#Создаем image с учетом alpha канала
image create photo $img -data $dimg -format "png -alpha $alfa"
#    $img put [list $rgb1] -to 0 0 [expr {$x2 - $x1}] [expr {$y2 -$y1}]
#Отображаем цветной прямоугольник
set imgr [$canv create image $x1 $y1 -image $img -anchor nw] 
set cc [subst {butImg $img}]
$canv bind $imgr <ButtonPress-1> $cc
#Оконтовка вокруг цветного прямоугольника
if {$wbd > 0 } {
set item [$canv create rect $x1 $y1 $x2 $y2 -outline $colorline -width $wbd ]
$canv bind $item <ButtonPress-1> $cc
}
return $imgr
}
proc butImg {img} {
tk_messageBox -title "Кнопка" -icon info -message "Нажали кнопку=$img" -detail "::screenwidth=$::scrwidthn::screenheight=$::scrheight" -parent .
if {$img == "exit"} {
set answer [tk_dialog .dialog2 "Конец работы" "Вы действительноnхотите выйти?" question 0 "Да" "Нет" ]
if {$answer == 0} {
exit
}	
}
}
proc page_titul {fr  logo_manufacturer} {
global mydir
#Создаем холст на весь экран
tkp::canvas $fr.can -borderwidth 0 -height [winfo screenheight .] -width [winfo screenwidth .] -relief flat
#Мостим холст плиткой 
createtile "$fr.can"  "tileand"
pack $fr.can  -anchor center -expand 1 -fill both -side top  -padx 0 -pady 0
#Вычисляем координаты для логотипа производителя
#update чтобы обновилась информация в БД об окнах
update
#    set aa [winfo height $fr.labtitul]
set aa $::padly
#Центрируем логотип разработчика
set ha [image width $logo_manufacturer]
set xman [expr {($::scrwidth - $ha) / 2 }]
$fr.can create image $xman $aa -image $logo_manufacturer -anchor nw -tag tag_logo
set blogo [$fr.can bbox tag_logo]
set wexit [lindex $blogo 3]
if {$::typetlf } {
set dlx [expr {$::padlx / 1}]
$fr.can create text [expr $dlx + 6] [expr {$wexit + $::padly + 6}] -anchor nw -text "Электронная подпись" -fill black -font {{Roboto Condensed Medium} 15 }
$fr.can create text $dlx [expr {$wexit + $::padly}] -anchor nw -text "Электронная подпись" -fill white -font {{Roboto Condensed Medium} 15 } -tag id_text0
update
set blogo [$fr.can bbox id_text0]
set wexit [lindex $blogo 3]
$fr.can create text [expr $dlx + 4] [expr {$wexit + $::padly + 4 - 80}] -anchor nw -text "для платформы Android" -fill black -font {{Roboto Condensed Medium} 13}
$fr.can create text $dlx [expr {$wexit + $::padly - 80}] -anchor nw -text "для платформы Android" -fill white -font {{Roboto Condensed Medium} 13} -tag id_text1
set blogo [$fr.can bbox id_text1]
set wexit [lindex $blogo 3]
$fr.can create text [expr $dlx + 3] [expr {$wexit + $::padly + 3 - 50}] -anchor nw -text "№ 63 ФЗ "Об электроннойnподписи от 6 апреля 2011 года"" -fill black -font {{Roboto} 10}
$fr.can create text $dlx [expr {$wexit + $::padly - 50}] -anchor nw -text "№ 63 ФЗ "Об электроннойnподписи от 6 апреля 2011 года"" -fill white -font {{Roboto} 10} -tag id_text2
set blogo [$fr.can bbox id_text2]
set wexit [lindex $blogo 3]
$fr.can create text [expr $dlx + 2] [expr {$wexit + $::padly + 2 - 40}] -text "Авторы: В.Н. Орловnhttp://soft.lissi.ru, http://www.lissi.run+7(495)589-99-53ne-mail: [email protected]" 
-anchor nw -fill black  -font {{Roboto} 9}
$fr.can create text $dlx [expr {$wexit + $::padly - 40}] -text "Авторы: В.Н. Орловnhttp://soft.lissi.ru, http://www.lissi.run+7(495)589-99-53ne-mail: [email protected]" 
-anchor nw -fill white -tag id_text3  -font {{Roboto} 9}
} else {
$fr.can create text [expr $::padlx + 2] [expr {$wexit + $::padly + 2}] -anchor nw -text "Электронная подпись" -fill black -font {{Nimbus Sans Narrow} 20}
$fr.can create text $::padlx [expr {$wexit + $::padly}] -anchor nw -text "Электронная подпись" -fill white -font {{Nimbus Sans Narrow} 20} -tag id_text0
set blogo [$fr.can bbox id_text0]
set wexit [lindex $blogo 3]
$fr.can create text [expr $::padlx + 2] [expr {$wexit + $::padly + 2 - 20}] -anchor nw -text "для платформы Android" -fill black -font {{Nimbus Sans Narrow} 18}
$fr.can create text $::padlx [expr {$wexit + $::padly - 20}] -anchor nw -text "для платформы Android" -fill white -font {{Nimbus Sans Narrow} 18} -tag id_text1
set blogo [$fr.can bbox id_text1]
set wexit [lindex $blogo 3]
$fr.can create text [expr $::padlx + 2] [expr {$wexit + $::padly + 2}] -anchor nw -text "№ 63 ФЗ "Об электроннойnподписи от 6 апреля 2011 года"" -fill black -font {{Nimbus Sans Narrow} 14}
$fr.can create text $::padlx [expr {$wexit + $::padly}] -anchor nw -text "№ 63 ФЗ "Об электроннойnподписи от 6 апреля 2011 года"" -fill white -font {{Nimbus Sans Narrow} 14} -tag id_text2
set blogo [$fr.can bbox id_text2]
set wexit [lindex $blogo 3]
$fr.can create text [expr $::padlx + 1] [expr {$wexit + $::padly + 1}] -text "Авторы: В.Н. Орловnhttp://soft.lissi.ru, http://www.lissi.run+7(495)589-99-53ne-mail: [email protected]" 
-anchor nw -fill black  -font {{Nimbus Sans Narrow} 12}
$fr.can create text $::padlx [expr {$wexit + $::padly}] -text "Авторы: В.Н. Орловnhttp://soft.lissi.ru, http://www.lissi.run+7(495)589-99-53ne-mail: [email protected]" 
-anchor nw -fill white -tag id_text3  -font {{Nimbus Sans Narrow} 12} -tag id_text3
set blogo [$fr.can bbox id_text2]
}
set blogo [$fr.can bbox id_text3]
set wland [lindex $blogo 3]
$fr.can create image $::padlx $wland -image logo_and -anchor nw -tag tag_land
set ha [image height logo_and]
set wa [image width logo_and]
set ha1 [expr {$ha - ($ha / 2 ) }]
$fr.can create image [expr {$wa - 80 }] [expr {$wland + $ha1}] -image svitok -anchor nw -tag tag_land
if {$::typetlf} {
set x1 [expr {$::padlx / 2}]
set y1 [expr {$wland + 120}]
set x2 [expr {$::::scrwidth - $x1}]
set y2 [expr {$y1 + 120}]
set wd 8
set rr 18
} else {
set x1 [expr {$::padlx / 2}]
set y1 [expr {$wland + 40}]
set x2 [expr {$::::scrwidth - $x1}]
set y2 [expr {$y1 + 40}]
set wd 4
set rr 6
}
set g5 [$fr.can gradient create linear -stops {{0 lightgreen} {1 green}}] 
set S3 [$fr.can style create -stroke "skyblue" -fill  $g5 -strokewidth $wd  -fillopacity 0.6]
set im1 [$fr.can create prect $x1 $y1 $x2 $y2 -rx $rr -style $S3]
$fr.can bind $im1 <ButtonPress-1> {butImg "img1"}
#Печатаем техт
set blogo [$fr.can bbox $im1]
set by2 [lindex $blogo 3]
set by1 [lindex $blogo 1]
set bb [expr {($by2 - $by1) / 2}]
set bx2 [lindex $blogo 2]
set bx1 [lindex $blogo 0]
set bbx [expr {($bx2 - $bx1) / 2}]
set txt1 [$fr.can create text [expr {$x1 + $::padlx * 2}] [expr {$y1 + 1 }] -anchor nw -text "Сайт разработчика" -fill black -font {{Arial} 10 normal}] 
#Центрируем техт
set btxt1 [$fr.can bbox $txt1]
#Смещение по оси Y
set ty2 [lindex $btxt1 3]
set ty1 [lindex $btxt1 1]
set tt [expr {$ty2 - $ty1}]
set tt [expr {$tt / 2}]
set offsy [expr {($by1 + $bb) - ($ty1 + $tt)}]
#Смещение по оси X
set tx2 [lindex $btxt1 2]
set tx1 [lindex $btxt1 0]
set ttx [expr {$tx2 - $tx1}]
set ttx [expr {$ttx / 2}]
set offsx [expr {($bx1 + $bbx) - ($tx1 + $ttx)}]
$fr.can move $txt1 $offsx $offsy
$fr.can bind $txt1 <ButtonPress-1> {butImg "img1"}
if {$::typetlf} {
set y1 [expr $y2 + 40]
set x2 [expr {$::::scrwidth - $x1}]
set y2 [expr {$y1 + 120}]
} else {
set y1 [expr {$y1 + 60}]
set x2 [expr {$::::scrwidth - $x1}]
set y2 [expr {$y1 + 40}]
}
set im1 [create_rectangle $fr.can "but2" $x1 $y1 $x2 $y2 "#2b972d" 0.6 $wd "skyblue"]
#Печатаем техт
set blogo [$fr.can bbox $im1]
set by2 [lindex $blogo 3]
set by1 [lindex $blogo 1]
set bb [expr {($by2 - $by1) / 2}]
set bx2 [lindex $blogo 2]
set bx1 [lindex $blogo 0]
set bbx [expr {($bx2 - $bx1) / 2}]
set txt1 [$fr.can create text [expr {$x1 + $::padlx * 2}] [expr {$y1 + 1 }] -anchor nw -text "Переход в основное меню" -fill black -font {{Roboto Condensed Medium} 12}] 
#Центрируем текст
set btxt1 [$fr.can bbox $txt1]
#Смещение по оси Y
set ty2 [lindex $btxt1 3]
set ty1 [lindex $btxt1 1]
set tt [expr {$ty2 - $ty1}]
set tt [expr {$tt / 2}]
set offsy [expr {($by1 + $bb) - ($ty1 + $tt)}]
#Смещение по оси X
set tx2 [lindex $btxt1 2]
set tx1 [lindex $btxt1 0]
set ttx [expr {$tx2 - $tx1}]
set ttx [expr {$ttx / 2}]
set offsx [expr {($bx1 + $bbx) - ($tx1 + $ttx)}]
$fr.can move $txt1 $offsx $offsy
$fr.can bind $txt1 <ButtonPress-1> {butImg "but2"}
if {$::typetlf} {
set x1 [expr {$::padlx / 2}]
set y1 [expr $y2 + 40]
set x2 [expr {$::::scrwidth - $x1}]
set y2 [expr {$y1 + 120}]
} else {
set x1 [expr {$::padlx / 2}]
set y1 [expr {$y1 + 60}]
set x2 [expr {$::::scrwidth - $x1}]
set y2 [expr {$y1 + 40}]
}
set S3 [$fr.can style create -stroke skyblue -fill  $g5 -strokewidth $wd  -fillopacity 0.6]
set im1 [$fr.can create prect $x1 $y1 $x2 $y2 -rx $rr -style $S3]
set blogo [$fr.can bbox $im1]
$fr.can bind $im1 <ButtonPress-1> {butImg "exit"}
set by2 [lindex $blogo 3]
set by1 [lindex $blogo 1]
set bb [expr {($by2 - $by1) / 2}]
set bx2 [lindex $blogo 2]
set bx1 [lindex $blogo 0]
set bbx [expr {($bx2 - $bx1) / 2}]
set txt1 [$fr.can create text [expr {$x1 + $::padlx * 2}] [expr {$y1 + 1 }] -anchor nw -text "Конец работы" -fill black  -font {Arial 10 normal}]
$fr.can bind $txt1 <ButtonPress-1> {butImg "exit"}
set btxt1 [$fr.can bbox $txt1]
#Смещение по оси Y
set ty2 [lindex $btxt1 3]
set ty1 [lindex $btxt1 1]
set tt [expr {$ty2 - $ty1}]
set tt [expr {$tt / 2}]
set offsy [expr {($by1 + $bb) - ($ty1 + $tt)}]
#Смещение по оси X
set tx2 [lindex $btxt1 2]
set tx1 [lindex $btxt1 0]
set ttx [expr {$tx2 - $tx1}]
set ttx [expr {$ttx / 2}]
set offsx [expr {($bx1 + $bbx) - ($tx1 + $ttx)}]
$fr.can move $txt1 $offsx $offsy
}
#Собственно скрипт
#Считываем размеры экрана
set ::scrwidth [winfo screenwidth .]
set ::scrheight [winfo screenheight .]
set ::typetlf 0
#Проверяем, что это телефон
if {$::scrwidth < $::scrheight} {
set ::typetlf 1
}
set ::padls 20
set ::padlx 15
set ::padly 15
if {$::typetlf} {
wm attributes . -fullscreen 1
scaleImage icon_openfile_18x16 3
scaleImage ::img::view_18x16 3
#Логотип производителя
scaleImage logo_orel 2
#Логотип продуктв
scaleImage logo_product 2
#Андроида tcl/tk
scaleImage logo_and 3
#Свиток опечатанный
scaleImage svitok 4
set ::padls 50
set ::padlx 75
set ::padly 50
} else {
#Конфигурирование виджета под смартфон
scaleImage logo_orel -2
set ::scrwidth 370
set ::scrheight 700
wm minsize . $::scrwidth $::scrheight
set geometr $::scrwidth
append geometr "x"
append geometr $::scrheight
append geometr "+0+0"
wm geometry . $geometr
}
#Создаем название продукта
set name_product "CryptoArmPKCS-A" 
label .labtitul -image logo_product -compound left -fg snow -text $name_product -font {Arial 10 bold} -anchor w  -width [winfo screenwidth .] -pady $::padls -padx 10 -bg #222222 
pack .labtitul -anchor nw -expand 0 -fill x -side top  -padx 1 -pady 0
#Создаем стартовую страницу
set i 0
ttk::frame .fr$i -pad 0 -padding 0
page_titul ".fr$i"  "logo_orel"
pack .fr$i -side top -anchor center -expand 1 -fill both -side top  -padx 0 -pady 0 
update

Ad hoc scriptum exequendum, una utilitas vel inutilis, utere;

$ /usr/local/bin64/undroidwish-e5dc71ed9d-linux64   create_titul_page.tcl

aut

$/usr/local/bin64/vanillawish-e5dc71ed9d-linux64  create_titul_page.tcl

Eventus in primo tortore ostenditur.

Secunda pagina recenset functionalitatem cryptoarmpkcs-A utilitatem. Quaelibet linea puga, cum coniuctionem, pagina functionis ostendetur. Geometria globuli collocationis in hac pagina fonte adhibito determinatur. Infra scriptum est creare_page_functiones Quisque potest etiam id emendare ad officia sua.

Scriptor create_page_functions.tcl

package require Tk
package require tkpath 0.3.0
global mydir
set mydir [file dirname [info script]]
#Увеличить/уменьшить (отрицательное значение - уменьшение)
proc scaleImage {im xfactor {yfactor 0}} {
set mode -subsample
if {$xfactor>=0 && $yfactor>=0} {
set mode -zoom
} else {
set xfactor [expr $xfactor * -1]
}
if {$yfactor == 0} {set yfactor $xfactor}
set t [image create photo]
$t copy $im
$im blank
$im copy $t -shrink $mode $xfactor $yfactor
image delete $t
}
proc createtile {w  backg} {
image create photo tiled
tiled copy $backg -to 0 0 $::scrwidth $::scrheight -shrink
$backg copy tiled
image delete tiled
# Мостим холст
$w create image 0 0  
-image $backg  
-anchor nw
}
proc butCliked {num fr} {
pack forget  .fr1
set ::tekFrfunc $fr
pack $fr -side top -anchor center -expand 1 -fill both -side top  -padx 0 -pady 0 
tk_dialog .dialog1 "Dear user:" "Button $num was clickednFr=$fr" info 0 OK 
}
proc butImg {img} {
tk_messageBox -title "Кнопка" -icon info -message "Нажали кнопку=$img" -detail "::screenwidth=$::scrwidthn::screenheight=$::scrheight" -parent .
if {$img == "exit"} {
set answer [tk_dialog .dialog2 "Конец работы" "Вы действительноnхотите выйти?" question 0 "Да" "Нет" ]
if {$answer == 0} {
exit
}	
}
}
proc butReturn {} {
pack forget  $::tekFrfunc
pack .fr1 -side top -anchor center -expand 1 -fill both -side top  -padx 0 -pady 0 
#    tk_dialog .dialog1 "Dear user:" "Button $num was clickednFr=$fr" info 0 OK 
}
proc page_func {fr tile titul functions} {
#Кнопки  меню
upvar $functions but
#Создаем шрифт для кнопок
if {$::typetlf} {
set feFONT_button "-family {Roboto} -size 9 -weight bold -slant roman"
set widl 10
} else {
set feFONT_button "-family {Arial} -size 12 -weight bold -slant roman"
set widl 5
}
catch {font delete fontTEMP_drawer}
eval font create fontTEMP_drawer  $feFONT_button
#Вычисляем максимальныю длину текста
set drawerCNT 0
set strMaxWidthPx 15
set Ndrawers [expr {[array size but] - 1}]
while { $drawerCNT <= $Ndrawers } {
set strWidthPx [font measure fontTEMP_drawer "$but($drawerCNT)"]
if { $strWidthPx > $strMaxWidthPx } {
set strMaxWidthPx $strWidthPx
}
incr drawerCNT
}
set drawerWidthPx [expr $strMaxWidthPx + 10]
set xxx [expr {($::::scrwidth - $drawerWidthPx) / 2}]
if {$fr != ".fr1"} {
set hret [expr $::scrheight / 4]
} else {
set hret $::scrheight
}
set hret [expr $::scrheight / 4]
tkp::canvas $fr.can -borderwidth 0 -height $hret -width $::scrwidth -relief flat
#Мостим холст плиткой 
createtile "$fr.can"  $tile
pack $fr.can  -anchor center -expand 1 -fill both -side top  -padx 0 -pady 0
if {$titul != "" } {
set allfunc $titul
catch {font delete fontTEMP_titul}
set font_titul "-family {Roboto Condensed Medium} -size 15"
eval font create fontTEMP_titul  $font_titul
set funcWidthPx [font measure fontTEMP_titul "$allfunc"]
set dlx [expr {($::::scrwidth - $funcWidthPx) / 2}]
$fr.can create text [expr $dlx + 6] [expr {6 + 6}] -anchor nw -text "$allfunc" -fill black -font fontTEMP_titul
$fr.can create text $dlx 6 -anchor nw -text "$allfunc" -fill white -font fontTEMP_titul -tag id_text0
set blogo [$fr.can bbox id_text0]
set boxbut [expr ([lindex $blogo 3] + 6 + 6)]
} else {
set boxbut [expr 6 + 6]
}
#Вычисляем самый широкий текст у кнопок
#См. выше
#Размещаем кнопки
set BDwidth_canvas 0
set maxTextHeightPx [font metrics fontTEMP_drawer -linespace] 
set maxTextHeightPx [expr {$maxTextHeightPx + ( $maxTextHeightPx / 2)}]
set drawerHeightPx $maxTextHeightPx
set xLocTextPx [expr {($::::scrwidth - $drawerWidthPx) / 2}]
set yLocTextPx [expr $BDwidth_canvas + ($drawerHeightPx / 2) + $boxbut]
set canvasHeightPx [expr $Ndrawers * $drawerHeightPx]
set drawerCNT 0
set Ndrawers [expr {[array size but] - 1}]
while { $drawerCNT <= $Ndrawers } {
set yLineLocPx [ expr (( $drawerCNT ) * $drawerHeightPx + $boxbut)]
#Линия перед текстом
$fr.can create line 
$xLocTextPx $yLineLocPx 
[expr $drawerWidthPx + $xLocTextPx] $yLineLocPx 
-fill "#a0a0a0" -width $widl
$fr.can create text [expr $xLocTextPx + 5] $yLocTextPx 
-anchor w 
-font fontTEMP_drawer 
-text "$but($drawerCNT)" 
-tag textlineTag($drawerCNT)
if {$drawerCNT == 0} {
if {$fr == ".fr1"} {
$fr.can bind textlineTag($drawerCNT)  <ButtonRelease-1>   {butImg "but1"}
} else {
$fr.can bind textlineTag($drawerCNT)  <ButtonRelease-1>   {butReturn}
}
} else {
frame .fn$drawerCNT -background white -relief flat -pady 0 -padx 0
set titul $but($drawerCNT)
set cmd "$fr.can bind textlineTag($drawerCNT)  <ButtonRelease-1>   {butCliked $drawerCNT .fn$drawerCNT}"
set cmd [subst "$cmd"]
eval $cmd 
set but1(0) "Возврат в основное меню"
page_func ".fn$drawerCNT" voda "$titul" "but1"
}
incr drawerCNT
set yLocTextPx [ expr $yLocTextPx + $drawerHeightPx]
#Завершаюшая линия
if { $drawerCNT > $Ndrawers } {
set yLineLocPx [ expr (( $drawerCNT ) * $drawerHeightPx + $boxbut)]
$fr.can create line $xLocTextPx $yLineLocPx 
[expr $drawerWidthPx + $xLocTextPx] $yLineLocPx 
-fill "#a0a0a0" -width $widl
}
}
}
#Собственно скрипт
#Считываем размеры экрана
set ::scrwidth [winfo screenwidth .]
set ::scrheight [winfo screenheight .]
set ::typetlf 0
#Проверяем, что это телефон
if {$::scrwidth < $::scrheight} {
set ::typetlf 1
}
set ::padls 20
set ::padlx 15
set ::padly 15
if {$::typetlf} {
wm attributes . -fullscreen 1
#Логотип продуктв
scaleImage logo_product 2
set ::padls 50
set ::padlx 75
set ::padly 50
} else {
#Конфигурирование виджета под смартфон
set ::scrwidth 370
set ::scrheight 700
wm minsize . $::scrwidth $::scrheight
set geometr $::scrwidth
append geometr "x"
append geometr $::scrheight
append geometr "+0+0"
wm geometry . $geometr
}
#Грузим картинки
image create photo voda -file [file join $mydir "imageme" "voda_400x800.png"]
#Логотип продукта
image create photo logo_product -file [file join $mydir "imageme" "validcertkey_51x24.png"] 
#Создаем название продукта
set name_product "CryptoArmPKCS-A" 
label .labtitul -image logo_product -compound left -fg snow -text $name_product -font {Arial 10 bold} -anchor w  -width [winfo screenwidth .] -pady $::padls -padx 10 -bg #222222 
pack .labtitul -anchor nw -expand 0 -fill x -side top  -padx 1 -pady 0
#Создаем страницы с функционалом
set i 1
ttk::frame .fr$i -pad 0 -padding 0
#Кнопки основного меню
set but(0) "Стартовая страница" 
set but(1) "Подписать документ"
set but(2) "Работаем с ЭП (PKCS7)" 
set but(3) "Запрос на сертификат" 
set but(4) "Просмотр запроса/сертификата" 
set but(5) "Список криптомеханизмов"
set but(6) "Просмотр ASN1-структуры" 
set but(7) "Объекты токена" 
set but(8) "Работаем с PKCS12/PFX" 
set but(9) "Самоподписанный сертификат"
set but(10) "Об Утилите/Дистрибутивы" 
set but(11) "Создать Токены"
set but(12) "Конфигурировние токена"
if {$::typetlf} {
scaleImage voda 3 2
}
#Создаем страницу с функционалом
page_func ".fr$i" voda "Функционал" "but"
#Отображаем страницу с функционалом
pack .fr$i -side top -anchor center -expand 1 -fill both -side top  -padx 0 -pady 0

Hoc scriptum etiam codicellos ad conjunctionem functionis cuiusque praeparat:

Tabulae cinematographicae refertae sunt contentorum classicorum et thematicorum (labelframe, globuli, etc.). Una harum blank impleta videri potest in dextra prima tortor. Cum in primo gradu opus PKCS#12 continentis notavimus, signum fere immutatum fuit pro cryptoarmpkcs-A. In hoc statu sequuntur munera implenda;

subscribere documentum (Cades-BES, CAdes-T, CAdes-XLT1);
Operamur cum subscriptione electronic (PKCS7), addito signatore;
Visum testimonium / libellum petitiones:
PKCS12/PFX laboramus;
de utilitate / Distributionibus:

Reliquae functiones cum signis PKCS#11 magis referuntur. Eorum portatio in annum novum dilata est. Propositum est coniungere signum et iungo cum software indicium nube.

Ex parte utilitatis, omnia fere cryptoarmpkcs utilitatis similia sunt. Sed sunt aliquae differentiae. Exempli causa, signo scripto, utilitas quaerit num verificabitur in rei publicae servitute subscriptio:

Cum puga pyga "Etiam" premes, navigatrum paginam augebis ad subscriptionem documentorum et testimonialium comprobanda. Dicamus ilicet hanc paginam non esse vere disposito in screen quis felis. Hoc notabile erit cum obsignatio seligat et, si subscriptio seiungitur, tabella cum tabella. Sed si omnia bona sunt, tunc pro certo habebimus;

Animadvertendum est quod inhibitio tam subscriptionis quam testimonium in rei publicae Services website tantum sensum facit si testimonium receptum est in centro certificationis adprobatum (УЦ). Alioquin subscriptio semper invalida erit.

Ut navigatrum appellavi, duos lineas ad rationem procedendi openUrl addere debebam;

proc openURL {url} {
global typesys
global macos
#  global windowsOS
#проверка, что утилита выполняется на смартфоне Android
if {$::typetlf} {
#Запуск браузера
borg activity android.intent.action.VIEW $url text/html
return
}
. . .
}

Navigatorium MASCULINUS sic appellatur:

borg activity android.intent.action.VIEW <URL> text/html

Proprium parvum est, cum novum signatorem addito documento ante signato. Novi libellum signatoris (immo, etiam PKCS#12 continens cum libello et clavis privatis) eligendum est in antecessum in pagina "Sign documenti" vel "Opus cum PKCS12/PFX", quam utilitas te admonebit. :

In operationibus diuturnis, horologium ad tick pergit;

Omne reliquum est, ubi distributiones inde acceptas et tibi gratulor in Novo Novo Anno ventura et omnes omnes optimos in 2020 exoptant!

Itaque distributiones pro Linux, OS X, Windows et Android:

Source: www.habr.com

Cryptographica workstation fundatur in signis publicis clavis pro suggestu MASCULINUS

Add a comment Отменить ответ