ostium
Olim administratio probata est experimentum ad IP telephony in officio nostro introducendum. Cum experientia mea in hac re esset exigua, negotium magnum in me excitavit studium, et in varias eventus rationes investigandas sum. In fine intendere decrevi communicare scientiam quam acquisieram in spem alicui usui fore. Itaβ¦
initial notitia
Asteriscus electus est et explicavit ut IP PBX. Classis telephonica consistit e Cisco 7906g, Panasonica UT-KX123B, Grandfluvia GXP1400 et Dlink DPH-150S(E)/F3, Yealink T19 et T21 machinis. Haec varietas ob hoc quod in experimenti parte placuit aliquid de omnibus experiri ad sententiam de pretio/qualitatis/commoditate ratiocinandam.
negotium
Simplificare et augere processum novarum machinarum quam maxime constituendi. Omnia telephona tempus synchronisedi debent, librum telephonicum oneratum a servo habent et accessum ad occasus administratori praebent.
Solutio huius problematis simplex est - deductio automatismi conformationis telephonicae, sic dictae. PROVIDENTIA. Profecto de meo exsecutione de hoc mirabili munere disseretur.
Configurans tftpd, dhcpd
Occasus telephonicas distribuere, optio universalis tftp elegi, omnibus suggestis suffulta, facile configurare et administrare.
Nulla certa figuratio pro tftp requirebatur. Vexillum tftpd institui et omnia quae necessaria erant in indice radicis collocavi.
Tabularios uncinos posui in directoriis secundum fabrica phone. Verum, machina Cisco numquam in suum folder ibat, ut in sua radice reponerem.
Ut telephona indicanda situm tftp servientis, optio-66. Praeterea eas in singulas classes fabricando divisit. Unumquodque genus suum segmentum electronicum recepit et unumquodque folder pro imaginum conformatione. Viam machinae ex D-linko electronicae MAC computandae erant, cum informationes de fabrica in dhcp petitione non praebent.
Fragment dhcpd.conf
# Specificare optiones optiones requisiti optio-66 c. 66 = text; genus "panasonic" {par si substring (optionem vendor-class-identifier,0,9) = "panasonic"; option option-66 "10.1.1.50/panasonic/"; } class "cisco" { match if substring (option vendor-class-identifier,0,36) = "Cisco Systems, Inc. IP Phone CP-7906"; option option-66 "10.1.1.50/cisco/"; } class "grandstream" { match if substring (option vendor-class-identifier,0,11) = "grandstream"; option option-66 "10.1.1.50/grandstream/"; } class "dlink" { par si (binarii-ad-ascii (16,8":", substring(hardware,1,4)) = "c8:d3:a3:8d") vel (16,8":", substring(hardware,1,4)) = "90:94:e4:72"); optio optio-66 "10.1.1.50/dlink/"; } class "yealink" { match if substring (option vendor-class-identifier,0,7) = "Yealink"; optio optio-66 "10.1.1.50/yealink/"; }
telephona gestabilia a piscina generali violenter excludenda erant. Alioquin nolebant ad "padding lacus" ire.
Exemplum de subnet occasus
subnet 10.1.1.0 netmask 255.255.255.0 { optio itineris 10.1.1.1; stagnum {negant membra "cisco"; membra negant "panasonic"; membra negant "dlink"; vagari 10.1.1.230 10.1.1.240; } piscinam {permitte membra "cisco"; vagari 10.1.1.65 10.1.1.69; } lacus {permittit membra "panasonic"; vagari 10.1.1.60 10.1.1.64; } lacus { permittit membra "dlink"; vagari 10.1.1.55 10.1.1.59; } }
Postquam omnia officia in quibus implicantur restarting, telephona confidenter ierunt ut servo suo tftp assignato pro occasus. Reliquum est ut eas ibi ponat.
Cisco 7906
Has machinis accepi in originali fasciculo. Amicos mihi cum asterisco mutandum habui. Sed id varius est. In casu speciali, fabrica configurare, secundum mandatum, tabellam SEPAABBCCDDEEFF.cnf.xml creavi in ββradice tftp servo. Ubi AABBCCDDEEFF est oratio MAC de fabrica.
Iam plus quam semel scripta est de phones e Cisco constituendis, ut tabellam operantes cum uncinis deseram.
Optiones pro Cisco
<?xml version="1.0" encoding="UTF-8"?> <device xsi_type="axl:XIPPhone" ctiid="94"> <fullConfig>true</fullConfig> <deviceProtocol>SIP</deviceProtocol> <sshUserId>root</sshUserId> <sshPassword>ADMIN_PWD</sshPassword> <devicePool> <dateTimeSetting> <dateTemplate>D-M-Y</dateTemplate> <timeZone>Central Pacific Standard Time</timeZone> <ntps> <ntp> <name>10.1.1.4</name> <ntpMode>Unicast</ntpMode> </ntp> </ntps> </dateTimeSetting> <callManagerGroup> <members> <member priority="0"> <callManager> <name>10.1.1.50</name> <ports> <ethernetPhonePort>2000</ethernetPhonePort> <sipPort>5060</sipPort> <securedSipPort>5061</securedSipPort> </ports> <processNodeName>10.1.1.50</processNodeName> </callManager> </member> </members> </callManagerGroup> <srstInfo> <srstOption>Disable</srstOption> </srstInfo> <connectionMonitorDuration>120</connectionMonitorDuration> </devicePool> <sipProfile> <sipCallFeatures> <cnfJoinEnabled>true</cnfJoinEnabled> <callForwardURI>x-cisco-serviceuri-cfwdall</callForwardURI> <callPickupURI>x-cisco-serviceuri-pickup</callPickupURI> <callPickupListURI>x-cisco-serviceuri-opickup</callPickupListURI> <callPickupGroupURI>x-cisco-serviceuri-gpickup</callPickupGroupURI> <meetMeServiceURI>x-cisco-serviceuri-meetme</meetMeServiceURI> <abbreviatedDialURI>x-cisco-serviceuri-abbrdial</abbreviatedDialURI> <rfc2543Hold>false</rfc2543Hold> <callHoldRingback>2</callHoldRingback> <localCfwdEnable>true</localCfwdEnable> <semiAttendedTransfer>true</semiAttendedTransfer> <anonymousCallBlock>2</anonymousCallBlock> <callerIdBlocking>2</callerIdBlocking> <dndControl>0</dndControl> <remoteCcEnable>true</remoteCcEnable> <retainForwardInformation>false</retainForwardInformation> </sipCallFeatures> <sipStack> <sipInviteRetx>6</sipInviteRetx> <sipRetx>10</sipRetx> <timerInviteExpires>180</timerInviteExpires> <timerRegisterExpires>3600</timerRegisterExpires> <timerRegisterDelta>5</timerRegisterDelta> <timerKeepAliveExpires>120</timerKeepAliveExpires> <timerSubscribeExpires>120</timerSubscribeExpires> <timerSubscribeDelta>5</timerSubscribeDelta> <timerT1>500</timerT1> <timerT2>4000</timerT2> <maxRedirects>70</maxRedirects> <remotePartyID>true</remotePartyID> <userInfo>None</userInfo> </sipStack> <autoAnswerTimer>1</autoAnswerTimer> <autoAnswerAltBehavior>false</autoAnswerAltBehavior> <autoAnswerOverride>true</autoAnswerOverride> <transferOnhookEnabled>false</transferOnhookEnabled> <enableVad>false</enableVad> <preferredCodec>none</preferredCodec> <dtmfAvtPayload>101</dtmfAvtPayload> <dtmfDbLevel>3</dtmfDbLevel> <dtmfOutofBand>avt</dtmfOutofBand> <kpml>3</kpml> <alwaysUsePrimeLine>false</alwaysUsePrimeLine> <alwaysUsePrimeLineVoiceMail>false</alwaysUsePrimeLineVoiceMail> <phoneLabel>Cisco Phone</phoneLabel> <stutterMsgWaiting>2</stutterMsgWaiting> <callStats>false</callStats> <offhookToFirstDigitTimer>15000</offhookToFirstDigitTimer> <silentPeriodBetweenCallWaitingBursts>10</silentPeriodBetweenCallWaitingBursts> <disableLocalSpeedDialConfig>true</disableLocalSpeedDialConfig> <poundEndOfDial>false</poundEndOfDial> <startMediaPort>16384</startMediaPort> <stopMediaPort>32766</stopMediaPort> <sipLines> <line button="1" lineIndex="1"> <featureID>9</featureID> <proxy>10.1.1.50</proxy> <port>5060</port> <autoAnswer> <autoAnswerEnabled>2</autoAnswerEnabled> </autoAnswer> <callWaiting>3</callWaiting> <sharedLine>false</sharedLine> <messageWaitingLampPolicy>3</messageWaitingLampPolicy> <messagesNumber></messagesNumber> <ringSettingIdle>4</ringSettingIdle> <ringSettingActive>5</ringSettingActive> <forwardCallInfoDisplay> <callerName>true</callerName> <callerNumber>true</callerNumber> <redirectedNumber>false</redirectedNumber> <dialedNumber>true</dialedNumber> </forwardCallInfoDisplay> <featureLabel></featureLabel> <displayName>User #103</displayName> <name>103</name> <authName>103</authName> <authPassword>SIP_PWD</authPassword> </line> </sipLines> <externalNumberMask>$num</externalNumberMask> <voipControlPort>5060</voipControlPort> <dscpForAudio>184</dscpForAudio> <ringSettingBusyStationPolicy>0</ringSettingBusyStationPolicy> <dialTemplate>dialplan.xml</dialTemplate> </sipProfile> <commonProfile> <phonePassword>*0#</phonePassword> <backgroundImageAccess>true</backgroundImageAccess> <callLogBlfEnabled>2</callLogBlfEnabled> </commonProfile> <loadInformation></loadInformation> <vendorConfig> <disableSpeaker>false</disableSpeaker> <disableSpeakerAndHeadset>false</disableSpeakerAndHeadset> <forwardingDelay>1</forwardingDelay> <pcPort>0</pcPort> <settingsAccess>1</settingsAccess> <garp>0</garp> <voiceVlanAccess>0</voiceVlanAccess> <videoCapability>0</videoCapability> <autoSelectLineEnable>1</autoSelectLineEnable> <webAccess>0</webAccess> <daysDisplayNotActive>1,7</daysDisplayNotActive> <displayOnTime>09:00</displayOnTime> <displayOnDuration>12:00</displayOnDuration> <displayIdleTimeout>01:00</displayIdleTimeout> <spanToPCPort>1</spanToPCPort> <loggingDisplay>2</loggingDisplay> <loadServer>10.1.1.50</loadServer> <recordingTone>0</recordingTone> <recordingToneLocalVolume>100</recordingToneLocalVolume> <recordingToneRemoteVolume>50</recordingToneRemoteVolume> <recordingToneDuration></recordingToneDuration> <displayOnWhenIncomingCall>0</displayOnWhenIncomingCall> <rtcp>0</rtcp> <moreKeyReversionTimer>5</moreKeyReversionTimer> <autoCallSelect>1</autoCallSelect> <logServer>10.1.1.50</logServer> <g722CodecSupport>0</g722CodecSupport> <headsetWidebandUIControl>0</headsetWidebandUIControl> <handsetWidebandUIControl>0</handsetWidebandUIControl> <headsetWidebandEnable>0</headsetWidebandEnable> <handsetWidebandEnable>0</handsetWidebandEnable> <peerFirmwareSharing>0</peerFirmwareSharing> <enableCdpSwPort>1</enableCdpSwPort> <enableCdpPcPort>1</enableCdpPcPort> </vendorConfig> <versionStamp>1143565489-a3cbf294-7526-4c29-8791-c4fce4ce4c37</versionStamp> <userLocale> <name>Russian_Russian_Federation</name> <langCode>ru_RU</langCode> <version></version> <winCharSet>utf-8</winCharSet> </userLocale> <networkLocale></networkLocale> <networkLocaleInfo> <name></name> <version></version> </networkLocaleInfo> <deviceSecurityMode>1</deviceSecurityMode> <idleTimeout>0</idleTimeout> <authenticationURL></authenticationURL> <directoryURL>http://10.1.1.50/provisioning/cisco-services.xml</directoryURL> <idleURL></idleURL> <informationURL></informationURL> <messagesURL></messagesURL> <proxyServerURL></proxyServerURL> <servicesURL>http://10.1.1.50/provisioning/cisco-services.xml</servicesURL> <dscpForSCCPPhoneConfig>96</dscpForSCCPPhoneConfig> <dscpForSCCPPhoneServices>0</dscpForSCCPPhoneServices> <dscpForCm2Dvce>96</dscpForCm2Dvce> <transportLayerProtocol>2</transportLayerProtocol> <singleButtonBarge>0</singleButtonBarge> <capfAuthMode>0</capfAuthMode> <capfList><capf> <phonePort>3804</phonePort> <!-- <processNodeName>10.1.1.50</processNodeName> --> </capf> </capfList> <certHash></certHash> <encrConfig>false</encrConfig> <advertiseG722Codec>1</advertiseG722Codec> </device>
D-Link DPH-150S/F3
Si telephonum in hac serie mox empturus es, cave, auto- tunditur solum in 150S/F3 machinis. In 150S/F2 fabrica quae in manus meas pervenerunt, talem functionem non inveni.
Configuratio fasciculi in xml vel manifesta forma textui esse potest. Una postulatio est pro xml: tag debet esse in initio lineae, alioquin parser eam negliget et valor parametri respondentis non mutabitur.
Duo files ad telephonum configurare solebant. f0D00580000.cfg - ad accommodanda occasus omnium telephonicorum et 00112233aabb.cfg (MAC oratio in casu inferiore) pro singulis fundis. Singulae occasus naturaliter prioritatem habent superiorem.
Plenus occasus plus quam mille lineas continet, ut articulum non cluant, minimam copiam occasus sufficientem describam.
Radix est nodi requiritur VOIP_CONFIG_FILE et nodi habitant in eo versionem. Occasus tantum adhibebitur si versio tabella altior est quam currens occasus in fabrica. Hunc valorem invenire potes per interfacem telephonicii in sectione conservativa (ratio administrationis). Pro phones cum uncinis officinarum, in utroque casu est 2.0002. Singulae tabellae praeterea versiones maiores esse debent quam versio fasciculi communis.
Primum fasciculum cum communi schemate omnibus telephoniis praebebo. Re vera omnia uncinis recondit, singula fasciculi tantum responsabiles erunt numero telephonico et inscriptione in scrinii.
In duobus clausulis infra, tempus zonae ac temporis synchronisationi parametri ponuntur, portus initialis pro RTP et pons retis inter WAN et LAN connexiones technicae valeant.
Fragment 1
<GLOBAL_CONFIG_MODULE> <WAN_Mode>DHCP</WAN_Mode> <Default_Protocol>2</Default_Protocol> <Enable_DHCP>1</Enable_DHCP> <DHCP_Auto_DNS>1</DHCP_Auto_DNS> <DHCP_Auto_Time>0</DHCP_Auto_Time> <Host_Name>VOIP</Host_Name> <RTP_Initial_Port>10000</RTP_Initial_Port> <RTP_Port_Quantity>200</RTP_Port_Quantity> <SNTP_Server>10.1.1.4</SNTP_Server> <Enable_SNTP>1</Enable_SNTP> <Time_Zone>71</Time_Zone> <Time_Zone_Name>UCT_011</Time_Zone_Name> <Enable_DST>0</Enable_DST> <SNTP_Timeout>60</SNTP_Timeout> <Default_UI>12</Default_UI> <MTU_Length>1500</MTU_Length> </GLOBAL_CONFIG_MODULE> <LAN_CONFIG_MODULE> <Enable_Bridge_Mode>1</Enable_Bridge_Mode> <Enable_Port_Mirror>1</Enable_Port_Mirror> </LAN_CONFIG_MODULE>
Nomina ipsa conformationis parametri satis sunt descripta ad vitanda ea in specie describenda.
HAUSTUS una linea
<SIP_CONFIG_MODULE> <SIP__Port>5060</SIP__Port> <SIP_Line_List> <SIP_Line_List_Entry> <ID>SIP1</ID> <Register_Addr>10.1.1.50</Register_Addr> <Register_Port>5060</Register_Port> <Register_TTL>3600</Register_TTL> <Enable_Reg>1</Enable_Reg> <Proxy_Addr>10.1.1.50</Proxy_Addr> <DTMF_Mode>1</DTMF_Mode> <DTMF_Info_Mode>0</DTMF_Info_Mode> <VoiceCodecMap>G711A,G711U,G722</VoiceCodecMap> </SIP_Line_List_Entry> </SIP_Line_List> </SIP_CONFIG_MODULE>
Remota Imperium Occasus
<MMI_CONFIG_MODULE> <Telnet_Port>23</Telnet_Port> <Web_Port>80</Web_Port> <Web_Server_Type>0</Web_Server_Type> <Https_Web_Port>443</Https_Web_Port> <Remote_Control>1</Remote_Control> <Enable_MMI_Filter>0</Enable_MMI_Filter> <Telnet_Prompt></Telnet_Prompt> <MMI_Filter> <MMI_Filter_Entry> <ID>Item1</ID> <First_IP>10.1.1.152</First_IP> <End_IP>10.1.1.160</End_IP> </MMI_Filter_Entry> </MMI_Filter> <MMI_Account> <MMI_Account_Entry> <ID>Account1</ID> <Name>admin</Name> <Password>ADMIN_PWD</Password> <Level>10</Level> </MMI_Account_Entry> <MMI_Account_Entry> <ID>Account2</ID> <Name>guest</Name> <Password>GUEST_PWD</Password> <Level>5</Level> </MMI_Account_Entry> </MMI_Account> </MMI_CONFIG_MODULE>
Phone occasus
<PHONE_CONFIG_MODULE> <Menu_Password>123</Menu_Password> <KeyLock_Password>123</KeyLock_Password> <Fast_Keylock_Code></Fast_Keylock_Code> <Enable_KeyLock>0</Enable_KeyLock> <Emergency_Call>112</Emergency_Call> <LCD_Title>Company</LCD_Title> <LCD_Constrast>5</LCD_Constrast> <LCD_Luminance>1</LCD_Luminance> <Backlight_Off_Time>30</Backlight_Off_Time> <Enable_Power_LED>0</Enable_Power_LED> <Time_Display_Style>0</Time_Display_Style> <Enable_TimeDisplay>1</Enable_TimeDisplay> <Alarm__Clock>0,,1</Alarm__Clock> <Date_Display_Style>0</Date_Display_Style> <Date_Separator>0</Date_Separator> <Enable_Pre-Dial>1</Enable_Pre-Dial> <Xml_PhoneBook> <Xml_PhoneBook_Entry> <ID>XML-PBook1</ID> <Name>Phonebook</Name> <Addr>http://10.1.1.50/provisioning/dlink-phonebook.xml</Addr> <Auth>:</Auth> <Policy>0</Policy> <Sipline>0</Sipline> </Xml_PhoneBook_Entry> </Xml_PhoneBook> <Phonebook_Groups>friend,home,work,business,classmate,colleague</Phonebook_Groups> </PHONE_CONFIG_MODULE>
Omnes aliae occasus manebit "default". Nunc quaevis telephonica Dlink cum retiacula coniuncta statim communem parametris pro omnibus accipiet. Singulos parametros ut pro fabrica constituas, fasciculus separatus necessarius est. In eo tantum opus est ut occasus necessarii singulis subscribenti notentur.
subscribens occasus
<?xml version="1.0" encoding="UTF-8"?> <VOIP_CONFIG_FILE> <version>2.0006</version> <SIP_CONFIG_MODULE> <SIP_Line_List> <SIP_Line_List_Entry> <ID>SIP1</ID> <Display_Name>User #117</Display_Name> <Phone_Number>117</Phone_Number> <Register_Port>5060</Register_Port> <Register_User>117</Register_User> <Register_Pswd>SIP_PWD</Register_Pswd> <Register_TTL>3600</Register_TTL> <Enable_Reg>1</Enable_Reg> <Proxy_Port>5060</Proxy_Port> <Proxy_User>117</Proxy_User> <Proxy_Pswd>SIP_PWD</Proxy_Pswd> </SIP_Line_List_Entry> </SIP_Line_List> </SIP_CONFIG_MODULE> </VOIP_CONFIG_FILE>
Panasonic UT-KX123B
Hae machinis occasus secundum rationem paulo diversam accipiunt. Configuratio in scriniis textibus reponitur. Maxima configuratio magnitudo fasciculi 120 KB est. Nihilominus numerus limariorum, tota magnitudo eorum 120 KB non excedere debet.
Configuratio fasciculi consistit in linea linearum, quae sequuntur condiciones subiectae;
- Prima linea semper est linea commentaria, inclusa sequenti serie notarum (44 bytes);
# Panasonic HAUSTUS Phone Latin Forma File #
Repraesentatio hexadecimali sequentis sequentis:
23 20 50 61 6E 61 73 6F 6E 69 63 20 53 49 50 20 50 68 6F 6E 65 20 53 74 61 6E 64 61 72 64 20 46 6F 72 6D 61 74 20 46 69 6 C 65 20 23
Ne forte mutationes accidentales ad ordinem notarum statutum pertineant, suadetur ut lima figuratio in linea incipiatur;
# HAUSTUS Panasonic Phone Standard Format File # NON MUTARE HAM LINEAM! - Configurationis lima finiendum inani linea.
- Quisque linea cum sequentia finire debet " Β».
- Maxima chorda longitudo 537 bytes inclusa sequentia " "
- Sequentes lineae neglectae sunt;
- lines excedens, 537 byte limit;
- lineis vacua;
- comment lineas incipiens cum "#";
- Fila cujusque moduli scribitur forma XXX="ayy" (XXX: nomen parametri, yyy: valor ipsius). Valor duplicibus sententiis includi debet.
- Linea parametri in plures lineas discindere non licet. Hoc evenit in errore processus limam configurationem et, per consequens defectum, initializationem.
- Valores aliquorum parametrorum separatim pro singulis lineis specificari debent. Parameter cum suffixo "_1" in nomine est parameter lineae 1; "_2"βfor line 2, etc.
- Maximam longitudinem parametri nomen XXXII ingenia.
- Maxima longitudo moduli valoris 500 characteribus duplicatis characteribus excepta est.
- Nulla spatia in chorda admittuntur nisi indoles spatium valorem comprehendat.
- Aliquot valores moduli definiri possunt "blank" ut modulum ad valorem inane constituant.
- Parametri nullo certo ordine specificantur.
- Si idem modulus plus semel in file configurationis specificatur, applicatur valor primi determinatus.
Talis gravitas necessitatum ad fasciculi configurationis, libere loquendo, me offendit. Opinor, exsecutio commercii cum servo regiminis in phones Panasonicis valde incommodum est. In hoc parametro, telephonum signanter aliis inferior est.
Cum primum machinam inverteris (vel post eam ad uncinis officinas reponenda), conatur onerare fasciculi producti sic dicti (in hoc casu KX-UT123RU.cfg), quae ad semitas continendas debet. reliquae configurationes imagini.
Tabularium productum# HAUSTUS Panasonic Phone Standard Format File # NON MUTARE HAM LINEAM!
CFG_STANDARD_FILE_PATH="tftp://10.1.1.50/panasonic/{mac}.cfg"
CFG_PRODUCT_FILE_PATH="tftp://10.1.1.50/panasonic/KX-UT123RU.cfg"
CFG_MASTER_FILE_PATH="tftp://10.1.1.50/panasonic/master.cfg"
Post haec, telephonum nuntium de praeparatione ad perfectionem exhibebit et exspectabit dum reboet. Et postquam reboot, incipit processus limae configurationis ei assignatae.
Commendatur occasus generales specificare pro omnibus telephoniis in file master.cfg. Ut cum Dlink, aliquos modulos tantum denotabo. Nomina reliquorum parametri earumque bona in documentis de fabrica reperiri possunt.
master.cfg################################################# ##########
#SystemSettings#
################################################# ##########
## Login Rationis Praeferentiae
ADMIN_ID="admin"
ADMIN_PASS="ADMIN_PWD"
USER_ID="user"
USER_PASS="USER_PWD"
## Ratio Tempus Occasus
NTP_ADDR="10.1.1.4"
TIME_ZONE="660"
DST_ENABLE="N"
DST_OFFSET="60"
DST_START_MONTH="3"
DST_START_ORDINAL_DAY="2"
DST_START_DAY_OF_WEEK="0"
DST_START_TIME="120"
DST_STOP_MONTH="10"
DST_STOP_ORDINAL_DAY="2"
DST_STOP_DAY_OF_WEEK="0"
DST_STOP_TIME="120"
LOCAL_TIME_ZONE_POSIX=""
## Syslog Optiones
SYSLOG_ADDR="10.1.1.50"
SYSLOG_PORT="514"
SYSLOG_EVENT_SIP="6"
SYSLOG_EVENT_CFG="6"
SYSLOG_EVENT_VOIP="6"
SYSLOG_EVENT_TEL="6"
Provisioning Occasus ##
OPTION66_ENABLE="Y"
OPTION66_REBOOT="N"
PROVISION_ENABLE="Y"
CFG_STANDARD_FILE_PATH="tftp://10.1.1.50/panasonic/{mac}.cfg"
CFG_PRODUCT_FILE_PATH="tftp://10.1.1.50/panasonic/KX-UT123RU.cfg"
CFG_MASTER_FILE_PATH="tftp://10.1.1.50/panasonic/master.cfg"
################################################# ##########
#NetworkSettings#
################################################# ##########
## IP Optiones
CONNECTION_TYPE="1"
HOST_NAME="UT123"
DHCP_DNS_ENABLE="Y"
STATIC_IP_ADDRESS=""
STATIC_SUBNET=""
STATIC_GATEWAY=""
USER_DNS1_ADDR=""
USER_DNS2_ADDR=""
DNS ## Occasus
DNS_QRY_PRLL="Y"
DNS_PRIORITY="N"
DNS1_ADDR="10.1.1.1"
DNS2_ADDR=""
## HTTP Optiones
HTTPD_PORTOPEN_AUTO="Y"
HTTP_VER="1"
HTTP_USER_AGENT="Panasonic_{MODEL}/{fwver} ({mac})"
HTTP_SSL_VERIFY="0"
CFG_ROOT_CERTIFICATE_PATH=""
## XML Application Occasus
XML_HTTPD_PORT="6666"
XMLAPP_ENABLE="Y"
XMLAPP_USERID=""
XMLAPP_USERPASS=""
XMLAPP_START_URL=""
XMLAPP_INITIAL_URL=""
XMLAPP_INCOMING_URL=""
XMLAPP_TALKING_URL=""
XMLAPP_MAKECALL_URL=""
XMLAPP_CALLLOG_URL=""
XMLAPP_IDLING_URL=""
XMLAPP_LDAP_URL="Β»
XMLAPP_LDAP_USERID=""
XMLAPP_LDAP_USERPASS=""
Traditionally, solum occasus subscribens manent in singulis tabellis machinalis.
aabbccddeeff.cfgDISPLAY_NAME_1="User #168"
PHONE_NUMBER_1="168"
SIP_URI_1="168"
LINE_ENABLE_1="Enable"
PROFILE_ENABLE_1="Enabled"
SIP_AUTHID_1="168"
SIP_PASS_1="SIP_PWD"
Grandstream GXP-1400
Parametri horum telephonicorum in una tabula xml repositae nomine cfg{mac}.xml. Vel in textu plano nomine cfg{mac}. Hoc telephonum solum unum fasciculum configurationis postulat, sic optimizing occasus movendo ad fasciculum commune non laborabit. Alterum notam erigi Grandstremam parametri nominat. Omnes numerati sunt et ut P### designati sunt. Exempli gratia:
P1650 - author interfaciei interretialem telephonicii administrandi (0 - HTTPS, 1 - HTTP)
P47 - HAUSTUS electronicus pro connexione servo.
Si figuratio in fasciculo textu reponitur, parametri nullam compagem requirunt nec ullo ordine sunt. Lineae ab # incipientes tractatae sunt ut comment.
Si occasus in forma xml sistuntur, in nodo nidificandi sunt , qui iterum nidificari debet . Omnes parametri scripti sunt in forma textuum respondentium cum valore parametri intus.
Profecta exempli gratia
1.0 8 1 1 SIP_PWD User# 271 1 271 270 109 ADMIN_PWD USER_PWD ru 270 35/grandis amnis 109 TZc-35 36 109 http://36/provisioning/grandstream triginta
Yealink T19 et T21 "
Horum technicae exemplorum singulas configurationes lima pro machinis et communibus ad exempla sustinent. In casu meo parametros generales collocare debebam in tabulariis y000000000031.cfg et y000000000034.cfg, respectively. Individualis fasciculi configurationes secundum MAC inscriptionem nominantur: 00112233aabb.cfg.
Occasus pro Yealinks in forma textu repositae sunt. Sola mandata facienda sunt praesentia tabellae versionis in linea prima, in forma #!version: 1.0.0.1.
Omnes parametri scripti sunt in forma moduli = pretii. Commentaria incipienda sunt cum charactere "#". Parametri nomina earumque bona in documentis reperiri possunt in pagina fabrica fabrica.
General Occasus#!version:1.0.0.1
#Configure LURIDUS portum genus; 0-DHCP (default), 1-PPPoE, 2-Static IP Address;
network.internet_port.type = 0
#Configurare genus PC portum; 0-Router, 1-Bridge (default);
network.bridge_mode = 1
#Configurare accessum typum interretiali servientis; 0-Disabled, 1-HTTP & HTTPS (default), 2-HTTP Tantum, 3-HTTPS Tantum;
network.web_server_type = 3
#Configure maximum portum localem RTP. Circumspicit ab 0 ad 65535, valor default 11800 est.
network.port.max_rtpport = 10100
#Configure minimum portum localem RTP. Circumspicit ab 0 ad 65535, valorem default 11780 est.
network.port.min_rtpport = 10000
security.user_name.admin = root
security.user_password = radix: ADMIN_PWD
security.user_name.user = user
security.user_password = user:USER_PWD
#Specificare linguam interretam, valores validi sunt: ββAnglica, Chinese_S, Turcica, Lusitana, Hispanica, Italica, Gallica, Russica, Deutsch et Bohemica.
lang.wui = Russian
#Specifica linguam LCD valores validi sunt: ββAnglica (default), Chinese_S, Chinese_T, Germanica, Gallica, Turcica, Italica, Polonica, Hispanica et Lusitana.
lang.gui = Russian
#Configure tempus zonam et tempus zonam nomine. Zona temporis ab -11 ad +12 vagatur, valor default +8 est.
ARCANIS CAELESTIBUS default zona temporis nomen est Sina (Beijing).
#Refer ad Yealink IP Phones User Guide ut zonae temporis ac temporis nomina zonae magis praesto sint.
local_time.time_zone = +11
local_time.time_zone_name = Vladivostok
#Configure domain nomen vel inscriptio IP servo NTP. Valor default est cn.pool.ntp.org.
local_time.ntp_server1 = 10.1.1.4
#Configure the logo modus screen LCD; 0-Disabled (default), 1-System logo, 2-Custom logo;
phone_setting.lcd_logo.mode = 1
#Configurare accessum domicilium et nomen telephoni refecti. X. iugis a 1 5 .
remote_phonebook.data.1.url =
remote_phonebook.data.1.name = Phonebook
features.remote_phonebook.flash_time = 3600
singula occasus#!version:1.0.0.1
#Activare vel disable rationem 1, 0-Disabled (default), 1-Enabled;
account.1.enable = 1
#Configure pittacium in screen LCD pro ratione1 ostendi.
account.1.label = Test telephonum
#Configure ostentationem nomine account1.
account.1.display_name = User 998
#Configure the username et password pro mandare authenticas.
account.1.auth_name = 998
account.1.password = 998
#Configure actis mandare nomine.
account.1.user_name = 998
#Configure servo electronica HAUSTUS.
account.1.sip_server_host = 10.1.1.50
#Specifica portum pro servo HAUSTUS. Valor default est 5060.
account.1.sip_server_port = 5060
Quam ob rem, propter mirificam provisionem auto- munerum, quae in telephoniis commemoravi, nullae difficultates erant quae novas machinas cum reticulo conectentes erant. Omnia descenderunt ut MAC inscriptionem telephoni inveniendam et conformationem limam in usu exemplaris crearet.
Spero te perlegere ad finem et profuisse quod legas.
Lorem animos.
Source: www.habr.com