QEMU 7.0 emulatora izlaidums

Tika izlaists projekta QEMU 7.0. Kā emulator QEMU ļauj palaist programmu, kas izveidota vienai aparatÅ«ras platformai, uz sistēmas ar pavisam citu arhitektÅ«ru, piemēram, izpildÄ«t ARM programmu uz x86 saderÄ«ga datora. Virtuālās vides režīmā QEMU koda izpildes veiktspēja izolētajā vidē ir tuvu aparatÅ«ras sistēmai, pateicoties instrukciju tieÅ”ai izpildei uz CPU un hipervizora Xen vai KVM moduļa izmantoÅ”anai.

Sākotnēji projektu izveidoja Fabris Bellards ar mērÄ·i nodroÅ”ināt iespēju darbināt x86 platformai izveidotus Linux izpildāmās failus uz arhitektÅ«rām, kas atŔķiras no x86. Izstrādes gadu laikā tika pievienota pilnÄ«gas emulācijas atbalsts 14 aparatÅ«ras arhitektÅ«rām, un emulēto aparatÅ«ras ierīču skaits pārsniedza 400. Sagatavojot 7.0 versiju, tika veikti vairāk nekā 2500 izmaiņu no 225 izstrādātājiem.

Galvenie uzlabojumi, kas pievienoti QEMU 7.0:

  • x86 arhitektÅ«ras emulatorā pievienots atbalsts Intel AMX (Advanced Matrix Extensions) instrukciju kopumam, kas Ä«stenots Intel Xeon Scalable servera procesoros. AMX piedāvā jaunus konfigurējamus TMM "TILE" reÄ£istrus un instrukcijas datu manipulēŔanai Å”ajos reÄ£istros, piemēram, TMUL (Tile matrix MULtiply) matricas reizināŔanai.
  • Sniedz iespēju ACPI notikumu žurnāloÅ”anai no viesu sistēmas caur ACPI ERST saskarni.
  • Virtiofs modulÄ«, kas tiek izmantots, lai pārsÅ«tÄ«tu daļu no viesu sistēmas failu sistēmas uz viesdatoru, uzlabots droŔības atzÄ«mju (security label) atbalsts. Novērsta CVE-2022-0358 ievainojamÄ«ba, kas ļauj paaugstināt privilēģijas sistēmā, radot izpildāmus failus virtiofs katalogos, kas pieder citai grupai un ir aprÄ«koti ar SGID karogu.
  • Palielināta aktÄ«vo sistēmas attēlu rezervēŔanas elastÄ«ba (tiek izveidots snapshots, pēc kura aktuālā stāvokļa atjaunināŔanai tiek pielietots copy-before-write (CBW) filtrs, kas kopē datus no laukumiem, kuros viesu sistēma veic ierakstus). Pievienots atbalsts attēliem formātos, kas atŔķiras no qcow2. NodroÅ”ināta iespēja piekļūt snapshot ar rezerves kopiju ne tieÅ”i, bet caur bloķējoŔās ierÄ«ces vadÄ«tāju snapshot-access. PaplaÅ”inātas CBW filtra darbÄ«bas pārvaldÄ«bas iespējas, piemēram, ir iespējams izslēgt no apstrādes noteiktas bitu kartes.
  • ARM emulator for ā€˜virt’ machines has added support for virtio-mem-pci, CPU topology definitions for guest systems, and PAuth activation when using the hypervisor KVM with the hvf accelerator. The ā€˜xlnx-versal-virt’ board emulator has added support for PMC SLCR and emulation of the OSPI Flash memory controller. New management models for CRF and APU have been added for the emulated ā€˜xlnx-zynqmp’ machines. Emulation of the FEAT_LVA2, FEAT_LVA (Large Virtual Address space), and FEAT_LPA (Large Physical Address space) extensions has been introduced.
  • Support for hosts with ARMv4 and ARMv5 CPUs, which lack support for unaligned memory access and do not have enough RAM to run QEMU, has been discontinued in the classic Tiny Code Generator (TCG).
  • The RISC-V architecture emulator has added support for the KVM hypervisor and implemented vector extensions Vector 1.0, as well as instructions Zve64f, Zve32f, Zfhmin, Zfh, zfinx, zdinx, and zhinx{min}. For the emulated ā€˜spike’ machines, support for loading OpenSBI binary files (RISC-V Supervisor Binary Interface) has been added. The ā€˜virt’ emulated machines can now utilize up to 32 CPU cores and support AIA.
  • The HPPA architecture emulator allows the use of up to 16 vCPUs, and the graphics driver for user environments HP-UX VDE/CDE has been improved. The ability to change the boot order for SCSI devices has been added.
  • In the OpenRISC architecture emulator for ā€˜sim’ boards, support for using up to 4 CPU cores, loading an external initrd image, and automatic device tree generation for the booting kernel has been added.
  • The PowerPC architecture emulator for the ā€˜pseries’ emulated machines has implemented the ability to run guest systems under the nested KVM hypervisor. Support for the spapr-nvdimm device has been added. The ā€˜powernv’ emulated machines now have support for the XIVE2 interrupt controller and PHB5 controllers, and enhancements have been made to the XIVE and PHB 3/4 support.
  • Support for z15 (Miscellaneous-Instruction-Extensions Facility 3) extensions has been added to the s390x architecture emulator.

Avots: opennet.lv

Iegādājieties uzticamu tÄ«mekļa hostingu ar DDoS aizsardzÄ«bu, VPS VDS serveriem šŸ”„ Iegādājieties uzticamu tÄ«mekļa hostingu ar DDoS aizsardzÄ«bu, VPS VDS serveriem | ProHoster