ProHoster > Блог > Whakahaerenga > Te teihana mahi cryptographic i runga i nga paerewa matua mo te papaaapapa Android

Te teihana mahi cryptographic i runga i nga paerewa matua mo te papaaapapa Android

Te teihana mahi cryptographic i runga i nga paerewa matua mo te papaaapapa AndroidKua tae ki te wa ki te whakaatu pehea te teihana mahi cryptographic i runga i nga paerewa matua a te iwi cryptoarmpkcs e mahi ana i runga i tetahi o nga papaa waea, ara ko te Android.

Ko te ariā i whakatakotoria i te wa e whakawhanake ana i te whaipainga cryptoarmpkcs ko te mea me pa ki te kaiwhakamahi te iti o te raru i te wa e hanga ana me te manatoko i tetahi waitohu hiko. Koinei te take ka whakaaro matou ki te whakamahi i nga tohu tohu tohu hei kawe matua mo te tiwhikete whaiaro PKCS # 11 me/ranei nga ipu haumaru PKCS # 12. Me kii ko te whakamahi i te PKCS#12 i roto i te maha o nga keehi ka puta ko te mea anake ka taea, hei tauira, karekau he tautoko i nga tohu PKCS#11 mo etahi papa. Na ka whakatau matou ki te timata ki te kawe i te whaipainga cryptoarmpkcs ki te papaaho Android me te tautoko mo nga ipu whakamarumaru PKCS#12.

Kia mahara tonu mai i te wa i mahia ai te kaupapa i runga i te papaaapapa C me Tcl/Tk, karekau he raru nui o te tauranga. I taea tenei na te hangarau Androwish. Me te hura me te te whakarite i te taiao Kaore he raruraru (ko taku taiao mahi ko Linux - Mageia-7.0). Ka hoatu e ahau kia kotahi anake te tuhinga mo te whakamahi Utauta Raina Whakahau Android (sdk-tools-linux-xxxx.zip):

#!/bin/sh
if [ $# -ne 1   ]
    then 
	echo "./InstallAndroidSDK.sh <sdk-tools-linux-xxxxxxxx.zip>"
	echo "Не указан архив или число параметров больше 1"
	exit 1
fi
if [ ! -f $1 ]
    then 
	echo "./InstallAndroidSDK.sh <sdk-tools-linux-xxxxxxxx.zip>"
	echo "архив $1 отсутствует"
	exit 1
fi
#Распаковываем SDK-TOOLS в папку tools
#unzip sdk-tools-linux-4333796.zip
unzip $1
#Создаем папку android-sdk-linux
mkdir android-sdk-linux
#Перемещвем папку tools в android-sdk-linux
mv tools android-sdk-linux
cd android-sdk-linux/tools/bin
./sdkmanager "platform-tools" "platforms;android-29"

Ko te mea tino whakamiharo ko te taiao Androwish e rua nga kaiwhakamaori, undrowish-xxx me vanillawish-xxx, he rite tonu te hanga ki nga "balalaikas" (nga kete) kei roto ano i a Androwish. Ko te rereketanga i waenga i te undrowish me te vanillawish ko te vanillawish he SDL/AGG/freetype e pa ana ki muri:

Te teihana mahi cryptographic i runga i nga paerewa matua mo te papaaapapa Android

Ko te aroaro o enei taputapu e rua ka taea e koe te whakawhanake i tetahi tono me te kore e whakamahi i te Android ake me tana emulator me te tino tata ki tetahi taputapu tuuturu. Tuatahi, ko te tikanga, undroidwish-xxx tenei.

Ko te putea ritenga mo te Android ka hangaia i roto i te taiao AWSDK. Me nukuhia to rakau kaupapa ki te kōpaki ~/AWSDK/taonga/taupānga. I tenei take, me whakaingoatia te waahanga matua o to kaupapa ki main.tcl. Mena ka whakamahi koe i etahi atu balalaikas me nga whare pukapuka hihiri, me whakanoho nga whare pukapuka ki nga kōpaki ~/AWSDK/libs/x86 mo te emulator me ~/AWSDK/libs/armeabi mo te taputapu mau.

I muri i tenei, rere noa te whakahau:

$wish ~/AWSDK/tools/bones

me te whai i ana tohutohu:

Te teihana mahi cryptographic i runga i nga paerewa matua mo te papaaapapa Android

Ko te kohinga apk kua kohia ka noho ki te ~/AWSDK/build/outputs/apk kōpaki.

Mena kei a koe he taputapu tuuturu, he emulator ranei e hono ana, ka taea te whakauru tonu i te kete.
I tenei keehi, me noho te taputapu tuuturu ki te aratau patuiro.

Engari kia hoki ano ki te tono ake. He aha te mea me whakarereke i roto?

Ko te tikanga, ko nga huringa e pa ana ki te rahi o te mata. Me hoahoa ano e ahau te matua (matapihi timata). Ko te mutunga, hei utu mo te matapihi kotahi i runga i te rorohiko auau:

Te teihana mahi cryptographic i runga i nga paerewa matua mo te papaaapapa Android

E toru nga matapihi i puta i runga i te Android:

Te teihana mahi cryptographic i runga i nga paerewa matua mo te papaaapapa Android

Ko te matapihi tuatahi he korero. Ko te tikanga, ka wehewehea ki etahi waahanga. Ko te waahanga tuatahi, kei runga, kei roto te ingoa o te taputapu me tana tohu.

I muri mai ko te waitohu o te kaihanga, te pepa korero me nga paatene e toru hei whakaoti i te wharangi.
Ka tuhia te wharangi ma te whakamahi i te waahanga kanawehi. E rua nga momo patene e whakamahia ana e te wharangi: kotahi te ahua o te tapawha whakawhiti (waenganui), me etahi atu e rua ki te ahua o te tapawha me nga kokonga porotaka. I whakamahia he balalaika hei hanga patene me nga kokonga porotaka tkpath. Noku ake, he tino pai te whakaaro o tenei balalaika ki ahau. Ko te tikanga, i te wa e mahi ana me te koaka, ka tangohia e te ahuahanga te waahanga o te waehere. Kei raro ko te tuhinga create_titul_page.tcl hei hanga i te wharangi tuatahi o te tono. Ka taea e te tangata te whakatika kia rite ki tana ake tirohanga.

Hangaia_titul_page.tcl

package require Tk
package require tkpath 0.3.0
global mydir
set mydir [file dirname [info script]]
#Грузим картинки
#Логотип продукта
image create photo logo_product -file [file join $mydir "imageme" "validcertkey_51x24.png"] 
#Логотип производителя
image create photo logo_orel -file [file join $mydir "imageme" "я_орел_425x200.png"] -format "png -alpha 1.0"
#Андроида с tcl/tk
image create photo logo_and -file [file join $mydir "imageme" "AndTk_inv_147x173.png"] -format "png -alpha 1.0"
#Свиток опечатанный
image create photo svitok -file [file join $mydir "imageme" "blue_svitok.png"] -format "png -alpha 1.0"
#Плитка
image create photo tileand -file [file join $mydir "imageme" "tile_green_and_32x32.png"] -format "png -alpha 1.0"
#Увеличить/уменьшить (отрицательное значение - уменьшение)
proc scaleImage {im xfactor {yfactor 0}} {
set mode -subsample
if {$xfactor>=0 && $yfactor>=0} {
set mode -zoom
} else {
set xfactor [expr $xfactor * -1]
}
if {$yfactor == 0} {set yfactor $xfactor}
set t [image create photo]
$t copy $im
$im blank
$im copy $t -shrink $mode $xfactor $yfactor
image delete $t
}
proc createtile {w  backg} {
image create photo tiled
tiled copy $backg -to 0 0 $::scrwidth $::scrheight -shrink
$backg copy tiled
image delete tiled
# Мостим холст
$w create image 0 0  
-image $backg  
-anchor nw
}
proc create_rectangle  {canv img x1 y1 x2 y2 color alfa {wbd 0} {colorline black} } {
image create photo $img -format "default -colorformat  rgb"
set rgb1 [winfo rgb $canv $color]
set cr  [lindex $rgb1 0]
set cg  [lindex $rgb1 1]
set cb  [lindex $rgb1 2]
set fill [format "#%04x%04x%04x" $cr $cg $cb ]
#Создаем цветной праямоугольник
$img put $fill -to 0 0 [expr {$x2 - $x1}] [expr {$y2 -$y1}]
#Сохраняем картинку
set dimg [$img data -format png]
#Создаем image с учетом alpha канала
image create photo $img -data $dimg -format "png -alpha $alfa"
#    $img put [list $rgb1] -to 0 0 [expr {$x2 - $x1}] [expr {$y2 -$y1}]
#Отображаем цветной прямоугольник
set imgr [$canv create image $x1 $y1 -image $img -anchor nw] 
set cc [subst {butImg $img}]
$canv bind $imgr <ButtonPress-1> $cc
#Оконтовка вокруг цветного прямоугольника
if {$wbd > 0 } {
set item [$canv create rect $x1 $y1 $x2 $y2 -outline $colorline -width $wbd ]
$canv bind $item <ButtonPress-1> $cc
}
return $imgr
}
proc butImg {img} {
tk_messageBox -title "Кнопка" -icon info -message "Нажали кнопку=$img" -detail "::screenwidth=$::scrwidthn::screenheight=$::scrheight" -parent .
if {$img == "exit"} {
set answer [tk_dialog .dialog2 "Конец работы" "Вы действительноnхотите выйти?" question 0 "Да" "Нет" ]
if {$answer == 0} {
exit
}	
}
}
proc page_titul {fr  logo_manufacturer} {
global mydir
#Создаем холст на весь экран
tkp::canvas $fr.can -borderwidth 0 -height [winfo screenheight .] -width [winfo screenwidth .] -relief flat
#Мостим холст плиткой 
createtile "$fr.can"  "tileand"
pack $fr.can  -anchor center -expand 1 -fill both -side top  -padx 0 -pady 0
#Вычисляем координаты для логотипа производителя
#update чтобы обновилась информация в БД об окнах
update
#    set aa [winfo height $fr.labtitul]
set aa $::padly
#Центрируем логотип разработчика
set ha [image width $logo_manufacturer]
set xman [expr {($::scrwidth - $ha) / 2 }]
$fr.can create image $xman $aa -image $logo_manufacturer -anchor nw -tag tag_logo
set blogo [$fr.can bbox tag_logo]
set wexit [lindex $blogo 3]
if {$::typetlf } {
set dlx [expr {$::padlx / 1}]
$fr.can create text [expr $dlx + 6] [expr {$wexit + $::padly + 6}] -anchor nw -text "Электронная подпись" -fill black -font {{Roboto Condensed Medium} 15 }
$fr.can create text $dlx [expr {$wexit + $::padly}] -anchor nw -text "Электронная подпись" -fill white -font {{Roboto Condensed Medium} 15 } -tag id_text0
update
set blogo [$fr.can bbox id_text0]
set wexit [lindex $blogo 3]
$fr.can create text [expr $dlx + 4] [expr {$wexit + $::padly + 4 - 80}] -anchor nw -text "для платформы Android" -fill black -font {{Roboto Condensed Medium} 13}
$fr.can create text $dlx [expr {$wexit + $::padly - 80}] -anchor nw -text "для платформы Android" -fill white -font {{Roboto Condensed Medium} 13} -tag id_text1
set blogo [$fr.can bbox id_text1]
set wexit [lindex $blogo 3]
$fr.can create text [expr $dlx + 3] [expr {$wexit + $::padly + 3 - 50}] -anchor nw -text "№ 63 ФЗ "Об электроннойnподписи от 6 апреля 2011 года"" -fill black -font {{Roboto} 10}
$fr.can create text $dlx [expr {$wexit + $::padly - 50}] -anchor nw -text "№ 63 ФЗ "Об электроннойnподписи от 6 апреля 2011 года"" -fill white -font {{Roboto} 10} -tag id_text2
set blogo [$fr.can bbox id_text2]
set wexit [lindex $blogo 3]
$fr.can create text [expr $dlx + 2] [expr {$wexit + $::padly + 2 - 40}] -text "Авторы: В.Н. Орловnhttp://soft.lissi.ru, http://www.lissi.run+7(495)589-99-53ne-mail: [email protected]" 
-anchor nw -fill black  -font {{Roboto} 9}
$fr.can create text $dlx [expr {$wexit + $::padly - 40}] -text "Авторы: В.Н. Орловnhttp://soft.lissi.ru, http://www.lissi.run+7(495)589-99-53ne-mail: [email protected]" 
-anchor nw -fill white -tag id_text3  -font {{Roboto} 9}
} else {
$fr.can create text [expr $::padlx + 2] [expr {$wexit + $::padly + 2}] -anchor nw -text "Электронная подпись" -fill black -font {{Nimbus Sans Narrow} 20}
$fr.can create text $::padlx [expr {$wexit + $::padly}] -anchor nw -text "Электронная подпись" -fill white -font {{Nimbus Sans Narrow} 20} -tag id_text0
set blogo [$fr.can bbox id_text0]
set wexit [lindex $blogo 3]
$fr.can create text [expr $::padlx + 2] [expr {$wexit + $::padly + 2 - 20}] -anchor nw -text "для платформы Android" -fill black -font {{Nimbus Sans Narrow} 18}
$fr.can create text $::padlx [expr {$wexit + $::padly - 20}] -anchor nw -text "для платформы Android" -fill white -font {{Nimbus Sans Narrow} 18} -tag id_text1
set blogo [$fr.can bbox id_text1]
set wexit [lindex $blogo 3]
$fr.can create text [expr $::padlx + 2] [expr {$wexit + $::padly + 2}] -anchor nw -text "№ 63 ФЗ "Об электроннойnподписи от 6 апреля 2011 года"" -fill black -font {{Nimbus Sans Narrow} 14}
$fr.can create text $::padlx [expr {$wexit + $::padly}] -anchor nw -text "№ 63 ФЗ "Об электроннойnподписи от 6 апреля 2011 года"" -fill white -font {{Nimbus Sans Narrow} 14} -tag id_text2
set blogo [$fr.can bbox id_text2]
set wexit [lindex $blogo 3]
$fr.can create text [expr $::padlx + 1] [expr {$wexit + $::padly + 1}] -text "Авторы: В.Н. Орловnhttp://soft.lissi.ru, http://www.lissi.run+7(495)589-99-53ne-mail: [email protected]" 
-anchor nw -fill black  -font {{Nimbus Sans Narrow} 12}
$fr.can create text $::padlx [expr {$wexit + $::padly}] -text "Авторы: В.Н. Орловnhttp://soft.lissi.ru, http://www.lissi.run+7(495)589-99-53ne-mail: [email protected]" 
-anchor nw -fill white -tag id_text3  -font {{Nimbus Sans Narrow} 12} -tag id_text3
set blogo [$fr.can bbox id_text2]
}
set blogo [$fr.can bbox id_text3]
set wland [lindex $blogo 3]
$fr.can create image $::padlx $wland -image logo_and -anchor nw -tag tag_land
set ha [image height logo_and]
set wa [image width logo_and]
set ha1 [expr {$ha - ($ha / 2 ) }]
$fr.can create image [expr {$wa - 80 }] [expr {$wland + $ha1}] -image svitok -anchor nw -tag tag_land
if {$::typetlf} {
set x1 [expr {$::padlx / 2}]
set y1 [expr {$wland + 120}]
set x2 [expr {$::::scrwidth - $x1}]
set y2 [expr {$y1 + 120}]
set wd 8
set rr 18
} else {
set x1 [expr {$::padlx / 2}]
set y1 [expr {$wland + 40}]
set x2 [expr {$::::scrwidth - $x1}]
set y2 [expr {$y1 + 40}]
set wd 4
set rr 6
}
set g5 [$fr.can gradient create linear -stops {{0 lightgreen} {1 green}}] 
set S3 [$fr.can style create -stroke "skyblue" -fill  $g5 -strokewidth $wd  -fillopacity 0.6]
set im1 [$fr.can create prect $x1 $y1 $x2 $y2 -rx $rr -style $S3]
$fr.can bind $im1 <ButtonPress-1> {butImg "img1"}
#Печатаем техт
set blogo [$fr.can bbox $im1]
set by2 [lindex $blogo 3]
set by1 [lindex $blogo 1]
set bb [expr {($by2 - $by1) / 2}]
set bx2 [lindex $blogo 2]
set bx1 [lindex $blogo 0]
set bbx [expr {($bx2 - $bx1) / 2}]
set txt1 [$fr.can create text [expr {$x1 + $::padlx * 2}] [expr {$y1 + 1 }] -anchor nw -text "Сайт разработчика" -fill black -font {{Arial} 10 normal}] 
#Центрируем техт
set btxt1 [$fr.can bbox $txt1]
#Смещение по оси Y
set ty2 [lindex $btxt1 3]
set ty1 [lindex $btxt1 1]
set tt [expr {$ty2 - $ty1}]
set tt [expr {$tt / 2}]
set offsy [expr {($by1 + $bb) - ($ty1 + $tt)}]
#Смещение по оси X
set tx2 [lindex $btxt1 2]
set tx1 [lindex $btxt1 0]
set ttx [expr {$tx2 - $tx1}]
set ttx [expr {$ttx / 2}]
set offsx [expr {($bx1 + $bbx) - ($tx1 + $ttx)}]
$fr.can move $txt1 $offsx $offsy
$fr.can bind $txt1 <ButtonPress-1> {butImg "img1"}
if {$::typetlf} {
set y1 [expr $y2 + 40]
set x2 [expr {$::::scrwidth - $x1}]
set y2 [expr {$y1 + 120}]
} else {
set y1 [expr {$y1 + 60}]
set x2 [expr {$::::scrwidth - $x1}]
set y2 [expr {$y1 + 40}]
}
set im1 [create_rectangle $fr.can "but2" $x1 $y1 $x2 $y2 "#2b972d" 0.6 $wd "skyblue"]
#Печатаем техт
set blogo [$fr.can bbox $im1]
set by2 [lindex $blogo 3]
set by1 [lindex $blogo 1]
set bb [expr {($by2 - $by1) / 2}]
set bx2 [lindex $blogo 2]
set bx1 [lindex $blogo 0]
set bbx [expr {($bx2 - $bx1) / 2}]
set txt1 [$fr.can create text [expr {$x1 + $::padlx * 2}] [expr {$y1 + 1 }] -anchor nw -text "Переход в основное меню" -fill black -font {{Roboto Condensed Medium} 12}] 
#Центрируем текст
set btxt1 [$fr.can bbox $txt1]
#Смещение по оси Y
set ty2 [lindex $btxt1 3]
set ty1 [lindex $btxt1 1]
set tt [expr {$ty2 - $ty1}]
set tt [expr {$tt / 2}]
set offsy [expr {($by1 + $bb) - ($ty1 + $tt)}]
#Смещение по оси X
set tx2 [lindex $btxt1 2]
set tx1 [lindex $btxt1 0]
set ttx [expr {$tx2 - $tx1}]
set ttx [expr {$ttx / 2}]
set offsx [expr {($bx1 + $bbx) - ($tx1 + $ttx)}]
$fr.can move $txt1 $offsx $offsy
$fr.can bind $txt1 <ButtonPress-1> {butImg "but2"}
if {$::typetlf} {
set x1 [expr {$::padlx / 2}]
set y1 [expr $y2 + 40]
set x2 [expr {$::::scrwidth - $x1}]
set y2 [expr {$y1 + 120}]
} else {
set x1 [expr {$::padlx / 2}]
set y1 [expr {$y1 + 60}]
set x2 [expr {$::::scrwidth - $x1}]
set y2 [expr {$y1 + 40}]
}
set S3 [$fr.can style create -stroke skyblue -fill  $g5 -strokewidth $wd  -fillopacity 0.6]
set im1 [$fr.can create prect $x1 $y1 $x2 $y2 -rx $rr -style $S3]
set blogo [$fr.can bbox $im1]
$fr.can bind $im1 <ButtonPress-1> {butImg "exit"}
set by2 [lindex $blogo 3]
set by1 [lindex $blogo 1]
set bb [expr {($by2 - $by1) / 2}]
set bx2 [lindex $blogo 2]
set bx1 [lindex $blogo 0]
set bbx [expr {($bx2 - $bx1) / 2}]
set txt1 [$fr.can create text [expr {$x1 + $::padlx * 2}] [expr {$y1 + 1 }] -anchor nw -text "Конец работы" -fill black  -font {Arial 10 normal}]
$fr.can bind $txt1 <ButtonPress-1> {butImg "exit"}
set btxt1 [$fr.can bbox $txt1]
#Смещение по оси Y
set ty2 [lindex $btxt1 3]
set ty1 [lindex $btxt1 1]
set tt [expr {$ty2 - $ty1}]
set tt [expr {$tt / 2}]
set offsy [expr {($by1 + $bb) - ($ty1 + $tt)}]
#Смещение по оси X
set tx2 [lindex $btxt1 2]
set tx1 [lindex $btxt1 0]
set ttx [expr {$tx2 - $tx1}]
set ttx [expr {$ttx / 2}]
set offsx [expr {($bx1 + $bbx) - ($tx1 + $ttx)}]
$fr.can move $txt1 $offsx $offsy
}
#Собственно скрипт
#Считываем размеры экрана
set ::scrwidth [winfo screenwidth .]
set ::scrheight [winfo screenheight .]
set ::typetlf 0
#Проверяем, что это телефон
if {$::scrwidth < $::scrheight} {
set ::typetlf 1
}
set ::padls 20
set ::padlx 15
set ::padly 15
if {$::typetlf} {
wm attributes . -fullscreen 1
scaleImage icon_openfile_18x16 3
scaleImage ::img::view_18x16 3
#Логотип производителя
scaleImage logo_orel 2
#Логотип продуктв
scaleImage logo_product 2
#Андроида tcl/tk
scaleImage logo_and 3
#Свиток опечатанный
scaleImage svitok 4
set ::padls 50
set ::padlx 75
set ::padly 50
} else {
#Конфигурирование виджета под смартфон
scaleImage logo_orel -2
set ::scrwidth 370
set ::scrheight 700
wm minsize . $::scrwidth $::scrheight
set geometr $::scrwidth
append geometr "x"
append geometr $::scrheight
append geometr "+0+0"
wm geometry . $geometr
}
#Создаем название продукта
set name_product "CryptoArmPKCS-A" 
label .labtitul -image logo_product -compound left -fg snow -text $name_product -font {Arial 10 bold} -anchor w  -width [winfo screenwidth .] -pady $::padls -padx 10 -bg #222222 
pack .labtitul -anchor nw -expand 0 -fill x -side top  -padx 1 -pady 0
#Создаем стартовую страницу
set i 0
ttk::frame .fr$i -pad 0 -padding 0
page_titul ".fr$i"  "logo_orel"
pack .fr$i -side top -anchor center -expand 1 -fill both -side top  -padx 0 -pady 0 
update

Hei mahi i tenei tuhinga, whakamahia tetahi o nga taputapu undroidwish, vanillawish ranei:

$ /usr/local/bin64/undroidwish-e5dc71ed9d-linux64   create_titul_page.tcl

ranei 

$/usr/local/bin64/vanillawish-e5dc71ed9d-linux64  create_titul_page.tcl

Ka whakaatuhia te hua ki te whakaahua tuatahi.

Ko te wharangi tuarua e whakaatu ana i nga mahi e tautokohia ana e te whaipainga cryptoarmpkcs-A. Ko ia raina he paatene, ka paatohia, ka whakaatuhia he whaarangi mahi. Ko te ahuahanga o te tuunga paatene ki tenei wharangi ka whakatauhia e te momotuhi e whakamahia ana. Kei raro nei te tuhinga create_page_functions.tcl hei hanga i te wharangi tuarua/mahi o te tono. Ka taea hoki e te tangata te whakatika kia rite ki a raatau mahi.

Hōtuhi create_page_functions.tcl

package require Tk
package require tkpath 0.3.0
global mydir
set mydir [file dirname [info script]]
#Увеличить/уменьшить (отрицательное значение - уменьшение)
proc scaleImage {im xfactor {yfactor 0}} {
set mode -subsample
if {$xfactor>=0 && $yfactor>=0} {
set mode -zoom
} else {
set xfactor [expr $xfactor * -1]
}
if {$yfactor == 0} {set yfactor $xfactor}
set t [image create photo]
$t copy $im
$im blank
$im copy $t -shrink $mode $xfactor $yfactor
image delete $t
}
proc createtile {w  backg} {
image create photo tiled
tiled copy $backg -to 0 0 $::scrwidth $::scrheight -shrink
$backg copy tiled
image delete tiled
# Мостим холст
$w create image 0 0  
-image $backg  
-anchor nw
}
proc butCliked {num fr} {
pack forget  .fr1
set ::tekFrfunc $fr
pack $fr -side top -anchor center -expand 1 -fill both -side top  -padx 0 -pady 0 
tk_dialog .dialog1 "Dear user:" "Button $num was clickednFr=$fr" info 0 OK 
}
proc butImg {img} {
tk_messageBox -title "Кнопка" -icon info -message "Нажали кнопку=$img" -detail "::screenwidth=$::scrwidthn::screenheight=$::scrheight" -parent .
if {$img == "exit"} {
set answer [tk_dialog .dialog2 "Конец работы" "Вы действительноnхотите выйти?" question 0 "Да" "Нет" ]
if {$answer == 0} {
exit
}	
}
}
proc butReturn {} {
pack forget  $::tekFrfunc
pack .fr1 -side top -anchor center -expand 1 -fill both -side top  -padx 0 -pady 0 
#    tk_dialog .dialog1 "Dear user:" "Button $num was clickednFr=$fr" info 0 OK 
}
proc page_func {fr tile titul functions} {
#Кнопки  меню
upvar $functions but
#Создаем шрифт для кнопок
if {$::typetlf} {
set feFONT_button "-family {Roboto} -size 9 -weight bold -slant roman"
set widl 10
} else {
set feFONT_button "-family {Arial} -size 12 -weight bold -slant roman"
set widl 5
}
catch {font delete fontTEMP_drawer}
eval font create fontTEMP_drawer  $feFONT_button
#Вычисляем максимальныю длину текста
set drawerCNT 0
set strMaxWidthPx 15
set Ndrawers [expr {[array size but] - 1}]
while { $drawerCNT <= $Ndrawers } {
set strWidthPx [font measure fontTEMP_drawer "$but($drawerCNT)"]
if { $strWidthPx > $strMaxWidthPx } {
set strMaxWidthPx $strWidthPx
}
incr drawerCNT
}
set drawerWidthPx [expr $strMaxWidthPx + 10]
set xxx [expr {($::::scrwidth - $drawerWidthPx) / 2}]
if {$fr != ".fr1"} {
set hret [expr $::scrheight / 4]
} else {
set hret $::scrheight
}
set hret [expr $::scrheight / 4]
tkp::canvas $fr.can -borderwidth 0 -height $hret -width $::scrwidth -relief flat
#Мостим холст плиткой 
createtile "$fr.can"  $tile
pack $fr.can  -anchor center -expand 1 -fill both -side top  -padx 0 -pady 0
if {$titul != "" } {
set allfunc $titul
catch {font delete fontTEMP_titul}
set font_titul "-family {Roboto Condensed Medium} -size 15"
eval font create fontTEMP_titul  $font_titul
set funcWidthPx [font measure fontTEMP_titul "$allfunc"]
set dlx [expr {($::::scrwidth - $funcWidthPx) / 2}]
$fr.can create text [expr $dlx + 6] [expr {6 + 6}] -anchor nw -text "$allfunc" -fill black -font fontTEMP_titul
$fr.can create text $dlx 6 -anchor nw -text "$allfunc" -fill white -font fontTEMP_titul -tag id_text0
set blogo [$fr.can bbox id_text0]
set boxbut [expr ([lindex $blogo 3] + 6 + 6)]
} else {
set boxbut [expr 6 + 6]
}
#Вычисляем самый широкий текст у кнопок
#См. выше
#Размещаем кнопки
set BDwidth_canvas 0
set maxTextHeightPx [font metrics fontTEMP_drawer -linespace] 
set maxTextHeightPx [expr {$maxTextHeightPx + ( $maxTextHeightPx / 2)}]
set drawerHeightPx $maxTextHeightPx
set xLocTextPx [expr {($::::scrwidth - $drawerWidthPx) / 2}]
set yLocTextPx [expr $BDwidth_canvas + ($drawerHeightPx / 2) + $boxbut]
set canvasHeightPx [expr $Ndrawers * $drawerHeightPx]
set drawerCNT 0
set Ndrawers [expr {[array size but] - 1}]
while { $drawerCNT <= $Ndrawers } {
set yLineLocPx [ expr (( $drawerCNT ) * $drawerHeightPx + $boxbut)]
#Линия перед текстом
$fr.can create line 
$xLocTextPx $yLineLocPx 
[expr $drawerWidthPx + $xLocTextPx] $yLineLocPx 
-fill "#a0a0a0" -width $widl
$fr.can create text [expr $xLocTextPx + 5] $yLocTextPx 
-anchor w 
-font fontTEMP_drawer 
-text "$but($drawerCNT)" 
-tag textlineTag($drawerCNT)
if {$drawerCNT == 0} {
if {$fr == ".fr1"} {
$fr.can bind textlineTag($drawerCNT)  <ButtonRelease-1>   {butImg "but1"}
} else {
$fr.can bind textlineTag($drawerCNT)  <ButtonRelease-1>   {butReturn}
}
} else {
frame .fn$drawerCNT -background white -relief flat -pady 0 -padx 0
set titul $but($drawerCNT)
set cmd "$fr.can bind textlineTag($drawerCNT)  <ButtonRelease-1>   {butCliked $drawerCNT .fn$drawerCNT}"
set cmd [subst "$cmd"]
eval $cmd 
set but1(0) "Возврат в основное меню"
page_func ".fn$drawerCNT" voda "$titul" "but1"
}
incr drawerCNT
set yLocTextPx [ expr $yLocTextPx + $drawerHeightPx]
#Завершаюшая линия
if { $drawerCNT > $Ndrawers } {
set yLineLocPx [ expr (( $drawerCNT ) * $drawerHeightPx + $boxbut)]
$fr.can create line $xLocTextPx $yLineLocPx 
[expr $drawerWidthPx + $xLocTextPx] $yLineLocPx 
-fill "#a0a0a0" -width $widl
}
}
}
#Собственно скрипт
#Считываем размеры экрана
set ::scrwidth [winfo screenwidth .]
set ::scrheight [winfo screenheight .]
set ::typetlf 0
#Проверяем, что это телефон
if {$::scrwidth < $::scrheight} {
set ::typetlf 1
}
set ::padls 20
set ::padlx 15
set ::padly 15
if {$::typetlf} {
wm attributes . -fullscreen 1
#Логотип продуктв
scaleImage logo_product 2
set ::padls 50
set ::padlx 75
set ::padly 50
} else {
#Конфигурирование виджета под смартфон
set ::scrwidth 370
set ::scrheight 700
wm minsize . $::scrwidth $::scrheight
set geometr $::scrwidth
append geometr "x"
append geometr $::scrheight
append geometr "+0+0"
wm geometry . $geometr
}
#Грузим картинки
image create photo voda -file [file join $mydir "imageme" "voda_400x800.png"]
#Логотип продукта
image create photo logo_product -file [file join $mydir "imageme" "validcertkey_51x24.png"] 
#Создаем название продукта
set name_product "CryptoArmPKCS-A" 
label .labtitul -image logo_product -compound left -fg snow -text $name_product -font {Arial 10 bold} -anchor w  -width [winfo screenwidth .] -pady $::padls -padx 10 -bg #222222 
pack .labtitul -anchor nw -expand 0 -fill x -side top  -padx 1 -pady 0
#Создаем страницы с функционалом
set i 1
ttk::frame .fr$i -pad 0 -padding 0
#Кнопки основного меню
set but(0) "Стартовая страница" 
set but(1) "Подписать документ"
set but(2) "Работаем с ЭП (PKCS7)" 
set but(3) "Запрос на сертификат" 
set but(4) "Просмотр запроса/сертификата" 
set but(5) "Список криптомеханизмов"
set but(6) "Просмотр ASN1-структуры" 
set but(7) "Объекты токена" 
set but(8) "Работаем с PKCS12/PFX" 
set but(9) "Самоподписанный сертификат"
set but(10) "Об Утилите/Дистрибутивы" 
set but(11) "Создать Токены"
set but(12) "Конфигурировние токена"
if {$::typetlf} {
scaleImage voda 3 2
}
#Создаем страницу с функционалом
page_func ".fr$i" voda "Функционал" "but"
#Отображаем страницу с функционалом
pack .fr$i -side top -anchor center -expand 1 -fill both -side top  -padx 0 -pady 0

Ka whakarite hoki tenei tuhinga i nga waahi mo ia paatene mahi:

Te teihana mahi cryptographic i runga i nga paerewa matua mo te papaaapapa Android

Ka whakakiia nga waahi ki nga widget matarohia me te kaupapa (papa tapanga, paatene, me etahi atu). Ko tetahi o enei waahi kua whakakiia ka kitea i te whakaahua tuatahi kei te taha matau. Mai i te wa tuatahi i aro matou ki te mahi me te ipu PKCS#12, i whakamahia te waehere kaore i whakarereketia mo te cryptoarmpkcs-A. I tenei waahanga ka whakatinanahia nga mahi e whai ake nei:

  • hainatia te tuhinga (Cades-BES, CAdes-T, CAdes-XLT1);
  • Ka mahi tahi matou me te waitohu hiko (PKCS7), tae atu ki te taapiri i te hainatanga;
  • Tirohia nga tiwhikete/tono tiwhikete:

    Te teihana mahi cryptographic i runga i nga paerewa matua mo te papaaapapa Android

  • Ka mahi tahi matou me PKCS12/PFX;
  • mo te whaipainga/Tohaina:

    Te teihana mahi cryptographic i runga i nga paerewa matua mo te papaaapapa Android

Ko nga mahi e toe ana e pa ana ki nga tohu PKCS#11. Kua hiki to ratou tauranga ki te Tau Hou. Kua whakamaheretia ki te hono i tetahi tohu rorohiko me te hono atu ki kapua tohu.

Mai i te tirohanga mahi, tata katoa he rite ki te whaipainga cryptoarmpkcs. Engari tera ano etahi rereke. Hei tauira, i muri i te hainatanga i tetahi tuhinga, ka patai te taputapu mena ka manatokohia te hainatanga ki te paetukutuku a State Services:

Te teihana mahi cryptographic i runga i nga paerewa matua mo te papaaapapa Android
Ka paohia te paatene "Ae", ka utaina e te kaitirotiro he wharangi hei manatoko i te hainatanga o nga tuhinga me nga tiwhikete. Me kii atu kaore tenei wharangi i tino hangaia mo te mata atamai. Ka kitea tenei i te wa e kowhiri ana i te waitohu, a, ki te wehea te hainatanga, ko te konae me te tuhinga. Engari ki te pai nga mea katoa, ka puta he hua pai:

Te teihana mahi cryptographic i runga i nga paerewa matua mo te papaaapapa Android

Kia maumahara ko te tirotiro i te hainatanga me te tiwhikete i runga i te paetukutuku a State Services he mea tika mena ka riro mai te tiwhikete i tetahi pokapu tohu whaimana (CA). Ki te kore, ka muhu tonu te hainatanga.

Hei waea atu ki te kaitirotiro, me taapiri e au etahi raina ki te tikanga openUrl:

proc openURL {url} {
global typesys
global macos
#  global windowsOS
#проверка, что утилита выполняется на смартфоне Android
if {$::typetlf} {
#Запуск браузера
borg activity android.intent.action.VIEW $url text/html
return
}
. . .
}

Ko te kaitirotiro i runga i te Android ka kiia e whai ake nei:

borg activity android.intent.action.VIEW <URL> text/html

He iti noa te ahua o te taapiri i te hainatanga hou ki tetahi tuhinga kua hainatia i mua. Ko te tiwhikete a te kaihaina hou (he pai ake ranei, ahakoa he ipu PKCS#12 me te tiwhikete me te taviri motuhake) me kowhiri i mua i runga i te wharangi "Waitohu tuhinga" me te wharangi "Mahi me te PKCS12/PFX", ma te whaipainga hei whakamahara ki a koe. :

Te teihana mahi cryptographic i runga i nga paerewa matua mo te papaaapapa Android
I roto i nga mahi mo te wa roa, ka tohu tonu te karaka:

Te teihana mahi cryptographic i runga i nga paerewa matua mo te papaaapapa Android
Ko nga mea e toe ana ko te kii kei hea te tango i nga tohatoha me te mihi ki a koe mo te Tau Hou e haere ake nei me te mihi ki nga tangata katoa i te tau 2020!

Te teihana mahi cryptographic i runga i nga paerewa matua mo te papaaapapa AndroidNa, tohatoha mo Linux, OS X, Windows me Android:

Source: will.com

Tāpiri i te kōrero