د کرنل جوړولو سیسټم یو سیټ دی میک فایلونه с ډیری د پروسې اتومات کولو لپاره دودیز اوزار او سکریپټونه. لومړی، د متقابل ترتیب پروګرام پرانیزئ:
make ARCH=um menuconfig
دا به په جزوي توګه ستاسو لپاره د ډیالوګ بکس جوړ او ښکاره کړي. كله '[Select]'، تاسو به وکولی شئ د Space یا Enter کیلي په کارولو سره تنظیم کړئ. کړکۍ ته لاړ شئ، د معمول په څیر، د کیبورډ تیر "پورته" او "لاندې" سره، او عناصر غوره کړئ - "کیڼ" یا "ښي".
د لید پوائنټر —> پدې معنی چې تاسو په فرعي مینو کې یاست ، د Enter کیلي په فشارولو سره لاسرسی ومومئ. له دې څخه د خلاصون لاره په څرګنده توګه ده '[Exit]'.
لاندې اختیارونه په 'کې شامل کړئ[Select]' او ډاډ ترلاسه کړئ چې دوی د دوی تر څنګ یو '[*]' لري:
UML-specific Options:
- Host filesystem
Networking support (enable this to get the submenu to show up):
- Networking options:
- TCP/IP Networking
UML Network devices:
- Virtual network device
- SLiRP transport
دا دی، تاسو کولی شئ په پرله پسې ډول د انتخابولو له لارې له دې کړکۍ څخه وځئ[Exit]'. یوازې ډاډ ترلاسه کړئ چې تاسو ته په پای کې د تنظیم کولو خوندي کولو ته هڅول کیږي او غوره کړئ '[Yes]'.
زه وړاندیز کوم چې تاسو د دې پوسټ لوستلو وروسته د کرنل جوړونې اختیارونو سره لوبې وکړئ. د دې تجربو له لارې ، تاسو کولی شئ د ټیټې کچې کرنل میخانیکونو کار پوهیدو او د هغې په مجلس کې د مختلف بیرغونو اغیزې په اړه ډیر څه زده کړئ.
linux --help
User Mode Linux v5.1.16
available at http://user-mode-linux.sourceforge.net/
--showconfig
Prints the config file that this UML binary was generated from.
iomem=<name>,<file>
Configure <file> as an IO memory region named <name>.
mem=<Amount of desired ram>
This controls how much "physical" memory the kernel allocates
for the system. The size is specified as a number followed by
one of 'k', 'K', 'm', 'M', which have the obvious meanings.
This is not related to the amount of memory in the host. It can
be more, and the excess, if it's ever used, will just be swapped out.
Example: mem=64M
--help
Prints this message.
debug
this flag is not needed to run gdb on UML in skas mode
root=<file containing the root fs>
This is actually used by the generic kernel in exactly the same
way as in any other kernel. If you configure a number of block
devices and want to boot off something other than ubd0, you
would use something like:
root=/dev/ubd5
--version
Prints the version number of the kernel.
umid=<name>
This is used to assign a unique identity to this UML machine and
is used for naming the pid file and management console socket.
con[0-9]*=<channel description>
Attach a console or serial line to a host channel. See
http://user-mode-linux.sourceforge.net/old/input.html for a complete
description of this switch.
eth[0-9]+=<transport>,<options>
Configure a network device.
aio=2.4
This is used to force UML to use 2.4-style AIO even when 2.6 AIO is
available. 2.4 AIO is a single thread that handles one request at a
time, synchronously. 2.6 AIO is a thread which uses the 2.6 AIO
interface to handle an arbitrary number of pending requests. 2.6 AIO
is not available in tt mode, on 2.4 hosts, or when UML is built with
/usr/include/linux/aio_abi.h not available. Many distributions don't
include aio_abi.h, so you will need to copy it from a kernel tree to
your /usr/include/linux in order to build an AIO-capable UML
nosysemu
Turns off syscall emulation patch for ptrace (SYSEMU).
SYSEMU is a performance-patch introduced by Laurent Vivier. It changes
behaviour of ptrace() and helps reduce host context switch rates.
To make it work, you need a kernel patch for your host, too.
See http://perso.wanadoo.fr/laurent.vivier/UML/ for further
information.
uml_dir=<directory>
The location to place the pid and umid files.
quiet
Turns off information messages during boot.
hostfs=<root dir>,<flags>,...
This is used to set hostfs parameters. The root directory argument
is used to confine all hostfs mounts to within the specified directory
tree on the host. If this isn't specified, then a user inside UML can
mount anything on the host that's accessible to the user that's running
it.
The only flag currently supported is 'append', which specifies that all
files opened by hostfs will be opened in append mode.
دا پینل د لانچ اصلي پیرامیټونه روښانه کوي. راځئ چې د لږ تر لږه اړین انتخابونو سیټ سره دانه چلوو:
linux
root=/dev/root
rootfstype=hostfs
rootflags=$HOME/prefix/uml-demo
rw
mem=64M
init=/bin/sh
دا کمانډ پرمخ وړئ او تاسو باید د لاندې په څیر یو څه ترلاسه کړئ:
یوه بله پاڼه
Core dump limits :
soft - 0
hard - NONE
Checking that ptrace can change system call numbers...OK
Checking syscall emulation patch for ptrace...OK
Checking advanced syscall emulation patch for ptrace...OK
Checking environment variables for a tempdir...none found
Checking if /dev/shm is on tmpfs...OK
Checking PROT_EXEC mmap in /dev/shm...OK
Adding 32137216 bytes to physical memory to account for exec-shield gap
Linux version 5.1.16 (cadey@kahless) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #30 Sun Jul 7 18:57:19 UTC 2019
Built 1 zonelists, mobility grouping on. Total pages: 23898
Kernel command line: root=/dev/root rootflags=/home/cadey/dl/uml/alpine rootfstype=hostfs rw mem=64M init=/bin/sh
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
Memory: 59584K/96920K available (2692K kernel code, 708K rwdata, 588K rodata, 104K init, 244K bss, 37336K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS: 15
clocksource: timer: mask: 0xffffffffffffffff max_cycles: 0x1cd42e205, max_idle_ns: 881590404426 ns
Calibrating delay loop... 7479.29 BogoMIPS (lpj=37396480)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes)
Checking that host ptys support output SIGIO...Yes
Checking that host ptys support SIGIO on close...No, enabling workaround
devtmpfs: initialized
random: get_random_bytes called from setup_net+0x48/0x1e0 with crng_init=0
Using 2.6 host AIO
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 256 (order: 0, 6144 bytes)
NET: Registered protocol family 16
clocksource: Switched to clocksource timer
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
console [stderr0] disabled
mconsole (version 2) initialized on /home/cadey/.uml/tEwIjm/mconsole
Checking host MADV_REMOVE support...OK
workingset: timestamp_bits=62 max_order=14 bucket_order=0
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered (default)
io scheduler bfq registered
loop: module loaded
NET: Registered protocol family 17
Initialized stdio console driver
Using a channel type which is configured out of UML
setup_one_line failed for device 1 : Configuration failed
Using a channel type which is configured out of UML
setup_one_line failed for device 2 : Configuration failed
Using a channel type which is configured out of UML
setup_one_line failed for device 3 : Configuration failed
Using a channel type which is configured out of UML
setup_one_line failed for device 4 : Configuration failed
Using a channel type which is configured out of UML
setup_one_line failed for device 5 : Configuration failed
Using a channel type which is configured out of UML
setup_one_line failed for device 6 : Configuration failed
Using a channel type which is configured out of UML
setup_one_line failed for device 7 : Configuration failed
Using a channel type which is configured out of UML
setup_one_line failed for device 8 : Configuration failed
Using a channel type which is configured out of UML
setup_one_line failed for device 9 : Configuration failed
Using a channel type which is configured out of UML
setup_one_line failed for device 10 : Configuration failed
Using a channel type which is configured out of UML
setup_one_line failed for device 11 : Configuration failed
Using a channel type which is configured out of UML
setup_one_line failed for device 12 : Configuration failed
Using a channel type which is configured out of UML
setup_one_line failed for device 13 : Configuration failed
Using a channel type which is configured out of UML
setup_one_line failed for device 14 : Configuration failed
Using a channel type which is configured out of UML
setup_one_line failed for device 15 : Configuration failed
Console initialized on /dev/tty0
console [tty0] enabled
console [mc-1] enabled
Failed to initialize ubd device 0 :Couldn't determine size of device's file
VFS: Mounted root (hostfs filesystem) on device 0:11.
devtmpfs: mounted
This architecture does not have kernel memory protection.
Run /bin/sh as init process
/bin/sh: can't access tty; job control turned off
random: fast init done
/ #
پورته لاسوهنې به موږ ته راکړي د میلمنو سیسټم لږترلږه، پرته له شیانو لکه /proc یا ټاکل شوی کوربه نوم. د مثال په توګه، لاندې کمانډونه هڅه وکړئ:
- uname -av
- cat /proc/self/pid
- hostname
د میلمه څخه د وتلو لپاره، ټایپ کړئ exit یا د فشار کنټرول. دا به شیل ووژني او د کرنل ویره تعقیب کړي:
/ # exit
Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000
fish: “./linux root=/dev/root rootflag…” terminated by signal SIGABRT (Abort)
موږ دا د کرنل ویره ترلاسه کړه ځکه چې د لینکس کرنل فکر کوي د پیل کولو پروسه تل روانه وي. پرته له دې، سیسټم نور نشي کولی کار وکړي او ټکر شي. مګر له هغه ځایه چې دا د کارونکي حالت پروسه ده ، پایله شوې محصول ځان ته لیږي SIGABRT، کوم چې د محصول پایله ده.
د میلمنو شبکې تنظیم کول
او دا هغه ځای دی چې شیان غلط پیل کیږي. د کارن موډ لینکس کې شبکه کول هغه ځای دی چیرې چې د محدود "کارونکي حالت" ټوله مفهوم له مینځه ځي. په هرصورت، معمولا د سیسټم په کچه، شبکه محدوده ده امتياز زموږ د ټولو د پوهیدو وړ دلایلو لپاره د اجرا کولو طریقې.
نوټ. per.: تاسو کولی شئ په UML کې د شبکې سره کار کولو لپاره د مختلف انتخابونو په اړه نور ولولئ دلته.
Slirp ته سفر
په هرصورت، دلته یو لرغونی او تقریبا غیر ملاتړ شوی وسیله نومیږي سلیپد کوم سره چې د کارن موډ لینکس کولی شي د شبکې سره اړیکه ونیسي. دا د کارونکي کچې TCP/IP سټیک په څیر کار کوي او د چلولو لپاره هیڅ سیسټم اجازې ته اړتیا نلري. دا وسیله وه په 1995 کې خپور شو، او وروستی تازه نیټه نیټه ده 2006 کال. سلیپ ډیر زوړ دی. د ملاتړ او تازه معلوماتو پرته د وخت په جریان کې ، تالیف کونکي دومره پرمخ تللي چې اوس دا وسیله یوازې تشریح کیدی شي کوډ روټ.
sudo apt-get install slirp
/usr/bin/slirp
Slirp v1.0.17 (BETA)
Copyright (c) 1995,1996 Danny Gasparovski and others.
All rights reserved.
This program is copyrighted, free software.
Please read the file COPYRIGHT that came with the Slirp
package for the terms and conditions of the copyright.
IP address of Slirp host: 127.0.0.1
IP address of your DNS(s): 1.1.1.1, 10.77.0.7
Your address is 10.0.2.15
(or anything else you want)
Type five zeroes (0) to exit.
[autodetect SLIP/CSLIP, MTU 1500, MRU 1500, 115200 baud]
SLiRP Ready ...
fish: “/usr/bin/slirp” terminated by signal SIGSEGV (Address boundary error)
او خدایانو. راځئ چې د سلیرپ ډیبګر نصب کړو او وګورو چې ایا موږ پوهیږو چې دلته څه پیښیږي:
sudo apt-get install gdb slirp-dbgsym
gdb /usr/bin/slirp
GNU gdb (Ubuntu 8.1-0ubuntu3) 8.1.0.20180409-git
Copyright (C) 2018 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-linux-gnu".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from /usr/bin/slirp...Reading symbols from /usr/lib/debug/.build-id/c6/2e75b69581a1ad85f72ac32c0d7af913d4861f.debug...done.
done.
(gdb) run
Starting program: /usr/bin/slirp
Slirp v1.0.17 (BETA)
Copyright (c) 1995,1996 Danny Gasparovski and others.
All rights reserved.
This program is copyrighted, free software.
Please read the file COPYRIGHT that came with the Slirp
package for the terms and conditions of the copyright.
IP address of Slirp host: 127.0.0.1
IP address of your DNS(s): 1.1.1.1, 10.77.0.7
Your address is 10.0.2.15
(or anything else you want)
Type five zeroes (0) to exit.
[autodetect SLIP/CSLIP, MTU 1500, MRU 1500, 115200 baud]
SLiRP Ready ...
Program received signal SIGSEGV, Segmentation fault.
ip_slowtimo () at ip_input.c:457
457 ip_input.c: No such file or directory.
تېروتنه په موږ کې وهي دا کرښه. راځئ چې سټیکټریس ته وګورو، شاید یو څه به زموږ سره مرسته وکړي:
(gdb) bt full
#0 ip_slowtimo () at ip_input.c:457
fp = 0x55784a40
#1 0x000055555556a57c in main_loop () at ./main.c:980
so = <optimized out>
so_next = <optimized out>
timeout = {tv_sec = 0, tv_usec = 0}
ret = 0
nfds = 0
ttyp = <optimized out>
ttyp2 = <optimized out>
best_time = <optimized out>
tmp_time = <optimized out>
#2 0x000055555555b116 in main (argc=1, argv=0x7fffffffdc58) at ./main.c:95
No locals.
دلته موږ ګورو چې حادثه د اصلي لوپ پیل په وخت کې پیښیږي کله چې سلیپ د وخت پای ته رسیدو لپاره هڅه کوي. پدې مرحله کې ، ما باید د ډیبګ کولو هڅه پریږدي. مګر راځئ وګورو چې ایا سلیرپ له ډولونو څخه جوړ شوی کار کوي. ما آرشیف مستقیم له سایټ څخه ډاونلوډ کړ سرچینه، ځکه چې د کمانډ لاین له لارې له هغه ځای څخه یو څه ایستل یو درد دی:
cd ~/dl
wget https://xena.greedo.xeserv.us/files/slirp-1.0.16.tar.gz
tar xf slirp-1.0.16.tar.gz
cd slirp-1.0.16/src
./configure --prefix=$HOME/prefix/slirp
make
vi slirp.h
:6
a
<enter>
#define inline /**/
<escape>
:wq
make
نه دا هم کار نه کوي. لا تر اوسه د دې دندو لپاره سمبولونه نشي موندلی.
په دې وخت کې، ما پریښود او د ګیتوب په لټه کې شوم هیروکو د کڅوړو جوړول. زما تیوري دا وه چې د هیروکو ځینې جوړونې کڅوړه به هغه بائنری ولري چې زه ورته اړتیا لرم. په پای کې، لټون ما رهبري کړه دلته. ما ډاونلوډ او پیک کړ uml.tar.gz او لاندې یې وموندل:
total 6136
-rwxr-xr-x 1 cadey cadey 79744 Dec 10 2017 ifconfig*
-rwxr-xr-x 1 cadey cadey 373 Dec 13 2017 init*
-rwxr-xr-x 1 cadey cadey 149688 Dec 10 2017 insmod*
-rwxr-xr-x 1 cadey cadey 66600 Dec 10 2017 route*
-rwxr-xr-x 1 cadey cadey 181056 Jun 26 2015 slirp*
-rwxr-xr-x 1 cadey cadey 5786592 Dec 15 2017 uml*
-rwxr-xr-x 1 cadey cadey 211 Dec 13 2017 uml_run*
دا د سلیپ بائنری دی! ایا هغه کار کوي؟
./slirp
Slirp v1.0.17 (BETA) FULL_BOLT
Copyright (c) 1995,1996 Danny Gasparovski and others.
All rights reserved.
This program is copyrighted, free software.
Please read the file COPYRIGHT that came with the Slirp
package for the terms and conditions of the copyright.
IP address of Slirp host: 127.0.0.1
IP address of your DNS(s): 1.1.1.1, 10.77.0.7
Your address is 10.0.2.15
(or anything else you want)
Type five zeroes (0) to exit.
[autodetect SLIP/CSLIP, MTU 1500, MRU 1500]
SLiRP Ready ...
ټکر نه کوي - نو دا باید کار وکړي! راځئ چې دا بائنری په کې کښت کړو ~/bin/slirp:
او بیا به موږ د کرنل کمانډ لاین کې بدلونونه راوړو:
linux
root=/dev/root
rootfstype=hostfs
rootflags=$HOME/prefix/uml-demo
rw
mem=64M
eth0=slirp,,$HOME/bin/slirp
init=/init.sh
او راځئ چې تکرار کړو:
SLiRP Ready ...
networking set up
/bin/sh: can't access tty; job control turned off
nslookup google.com 8.8.8.8
Server: 8.8.8.8
Address 1: 8.8.8.8 dns.google
Name: google.com
Address 1: 172.217.12.206 lga25s63-in-f14.1e100.net
Address 2: 2607:f8b0:4004:800::200e iad30s09-in-x0e.1e100.net
شبکه باثباته ده!
د ډاکر فایل
د دې لپاره چې تاسو ته دا ټول چیک کول اسانه کړي ، ما راټول کړي دي ډکولر، کوم چې بیان شوي ډیری مرحلې اتومات کوي او تاسو ته باید کاري ترتیب درکړي. زه هم لرم مخکې ترتیب شوی کرنل، کوم چې هرڅه لري چې په پوسټ کې تشریح شوي. مګر دا مهمه ده چې پوه شئ چې دلته ما یوازې لږترلږه ترتیب بیان کړی دی.