Poznámka. preklad.: autor článku - Erkan Erol, inžinier zo SAP - zdieľa svoju štúdiu o mechanizmoch fungovania tímu kubectl exec, tak známy každému, kto pracuje s Kubernetes. Celý algoritmus sprevádza výpismi zdrojového kódu Kubernetes (a súvisiacich projektov), ktoré vám umožňujú pochopiť tému tak hlboko, ako je to potrebné.
Raz v piatok za mnou prišiel kolega a spýtal sa ma, ako vykonať príkaz v module pomocou . Nevedel som mu odpovedať a zrazu som si uvedomil, že neviem nič o mechanizme práce kubectl exec. Áno, mal som isté predstavy o jeho zariadení, no nebol som si 100% istý ich správnosťou a preto som sa rozhodol venovať sa tejto problematike. Po preštudovaní blogov, dokumentácie a zdrojového kódu som sa veľa naučil av tomto článku sa chcem podeliť o svoje objavy a pochopenie. Ak niečo nie je v poriadku, kontaktujte ma na .
Tréning
Aby som vytvoril klaster na MacBooku, naklonoval som . Potom som opravil IP adresy uzlov v konfigurácii kubelet'a, pretože predvolené nastavenia neumožňovali kubectl exec. O hlavnom dôvode si môžete prečítať viac .
- Akýkoľvek stroj = môj MacBook
- IP hlavného uzla = 192.168.205.10
- IP pracovný uzol = 192.168.205.11
- Port servera API = 6443
Komponenty
- proces kubectl exec: keď urobíme "kubectl exec..." proces sa spustí. Môžete to urobiť na akomkoľvek počítači s prístupom k serveru K8s API. Poznámka. preklad: Ďalej vo výpisoch konzoly autor používa komentár „akýkoľvek stroj“, čo znamená, že nasledujúce príkazy je možné vykonávať na akomkoľvek takomto stroji s prístupom ku Kubernetes.
- : Komponent na hlavnom uzle, ktorý poskytuje prístup k rozhraniu Kubernetes API. Toto je frontend pre riadiacu rovinu v Kubernetes.
- : agent, ktorý beží na každom uzle v klastri. Zabezpečuje prácu nádob v pod.
- (container runtime): Softvér zodpovedný za prevádzku kontajnerov. Príklady: Docker, CRI-O, kontajnerové…
- jadro: jadro OS na pracovnom uzle; zodpovedný za riadenie procesov.
- terč (cieľ) kontajner: kontajner, ktorý je súčasťou modulu a beží na jednom z pracovných uzlov.
Čo som objavil
1. Činnosť na strane klienta
Vytvorte pod v mennom priestore default:
// any machine
$ kubectl run exec-test-nginx --image=nginxPotom vykonáme príkaz exec a počkáme 5000 sekúnd na ďalšie pozorovania:
// any machine
$ kubectl exec -it exec-test-nginx-6558988d5-fgxgg -- sh
# sleep 5000Objaví sa proces kubectl (s pid=8507 v našom prípade):
// any machine
$ ps -ef |grep kubectl
501 8507 8409 0 7:19PM ttys000 0:00.13 kubectl exec -it exec-test-nginx-6558988d5-fgxgg -- shAk skontrolujeme sieťovú aktivitu procesu, zistíme, že má pripojenie k api-serveru (192.168.205.10.6443):
// any machine
$ netstat -atnv |grep 8507
tcp4 0 0 192.168.205.1.51673 192.168.205.10.6443 ESTABLISHED 131072 131768 8507 0 0x0102 0x00000020
tcp4 0 0 192.168.205.1.51672 192.168.205.10.6443 ESTABLISHED 131072 131768 8507 0 0x0102 0x00000028Pozrime sa na kód. Kubectl vytvorí požiadavku POST s podzdrojom exec a odošle požiadavku REST:
req := restClient.Post().
Resource("pods").
Name(pod.Name).
Namespace(pod.Namespace).
SubResource("exec")
req.VersionedParams(&corev1.PodExecOptions{
Container: containerName,
Command: p.Command,
Stdin: p.Stdin,
Stdout: p.Out != nil,
Stderr: p.ErrOut != nil,
TTY: t.Raw,
}, scheme.ParameterCodec)
return p.Executor.Execute("POST", req.URL(), p.Config, p.In, p.Out, p.ErrOut, t.Raw, sizeQueue)()
2. Aktivita na strane hlavného uzla
Požiadavku môžeme pozorovať aj na strane api-servera:
handler.go:143] kube-apiserver: POST "/api/v1/namespaces/default/pods/exec-test-nginx-6558988d5-fgxgg/exec" satisfied by gorestful with webservice /api/v1
upgradeaware.go:261] Connecting to backend proxy (intercepting redirects) https://192.168.205.11:10250/exec/default/exec-test-nginx-6558988d5-fgxgg/exec-test-nginx?command=sh&input=1&output=1&tty=1
Headers: map[Connection:[Upgrade] Content-Length:[0] Upgrade:[SPDY/3.1] User-Agent:[kubectl/v1.12.10 (darwin/amd64) kubernetes/e3c1340] X-Forwarded-For:[192.168.205.1] X-Stream-Protocol-Version:[v4.channel.k8s.io v3.channel.k8s.io v2.channel.k8s.io channel.k8s.io]]Všimnite si, že požiadavka HTTP obsahuje požiadavku na zmenu protokolu. umožňuje, aby boli oddelené "streamy" stdin/stdout/stderr/spdy-error multiplexované cez jediné pripojenie TCP.
Server API prijme požiadavku a skonvertuje ju na PodExecOptions:
// PodExecOptions is the query options to a Pod's remote exec call
type PodExecOptions struct {
metav1.TypeMeta
// Stdin if true indicates that stdin is to be redirected for the exec call
Stdin bool
// Stdout if true indicates that stdout is to be redirected for the exec call
Stdout bool
// Stderr if true indicates that stderr is to be redirected for the exec call
Stderr bool
// TTY if true indicates that a tty will be allocated for the exec call
TTY bool
// Container in which to execute the command.
Container string
// Command is the remote command to execute; argv array; not executed within a shell.
Command []string
}()
Na vykonanie požadovaných akcií musí api-server vedieť, ktorý modul potrebuje kontaktovať:
// ExecLocation returns the exec URL for a pod container. If opts.Container is blank
// and only one container is present in the pod, that container is used.
func ExecLocation(
getter ResourceGetter,
connInfo client.ConnectionInfoGetter,
ctx context.Context,
name string,
opts *api.PodExecOptions,
) (*url.URL, http.RoundTripper, error) {
return streamLocation(getter, connInfo, ctx, name, opts, opts.Container, "exec")
}()
Samozrejme, údaje o koncovom bode sú prevzaté z informácií o uzle:
nodeName := types.NodeName(pod.Spec.NodeName)
if len(nodeName) == 0 {
// If pod has not been assigned a host, return an empty location
return nil, nil, errors.NewBadRequest(fmt.Sprintf("pod %s does not have a host assigned", name))
}
nodeInfo, err := connInfo.GetConnectionInfo(ctx, nodeName)()
Hurá! Kubelet má teraz port (node.Status.DaemonEndpoints.KubeletEndpoint.Port), ku ktorému sa môže server API pripojiť:
// GetConnectionInfo retrieves connection info from the status of a Node API object.
func (k *NodeConnectionInfoGetter) GetConnectionInfo(ctx context.Context, nodeName types.NodeName) (*ConnectionInfo, error) {
node, err := k.nodes.Get(ctx, string(nodeName), metav1.GetOptions{})
if err != nil {
return nil, err
}
// Find a kubelet-reported address, using preferred address type
host, err := nodeutil.GetPreferredNodeAddress(node, k.preferredAddressTypes)
if err != nil {
return nil, err
}
// Use the kubelet-reported port, if present
port := int(node.Status.DaemonEndpoints.KubeletEndpoint.Port)
if port <= 0 {
port = k.defaultPort
}
return &ConnectionInfo{
Scheme: k.scheme,
Hostname: host,
Port: strconv.Itoa(port),
Transport: k.transport,
}, nil
}()
Z dokumentácie :
Tieto pripojenia sú ukončené na koncovom bode HTTPS kubeletu. V predvolenom nastavení apiserver neoveruje certifikát kubelet, čo robí pripojenie zraniteľným voči "man-in-the-middle útokom" (MITM) a nebezpečné pracovať v nedôveryhodných a/alebo verejných sieťach.
Teraz server API pozná koncový bod a vytvorí spojenie:
// Connect returns a handler for the pod exec proxy
func (r *ExecREST) Connect(ctx context.Context, name string, opts runtime.Object, responder rest.Responder) (http.Handler, error) {
execOpts, ok := opts.(*api.PodExecOptions)
if !ok {
return nil, fmt.Errorf("invalid options object: %#v", opts)
}
location, transport, err := pod.ExecLocation(r.Store, r.KubeletConn, ctx, name, execOpts)
if err != nil {
return nil, err
}
return newThrottledUpgradeAwareProxyHandler(location, transport, false, true, true, responder), nil
}()
Pozrime sa, čo sa stane na hlavnom uzle.
Najprv zistite IP pracovného uzla. V našom prípade je to 192.168.205.11:
// any machine
$ kubectl get nodes k8s-node-1 -o wide
NAME STATUS ROLES AGE VERSION INTERNAL-IP EXTERNAL-IP OS-IMAGE KERNEL-VERSION CONTAINER-RUNTIME
k8s-node-1 Ready <none> 9h v1.15.3 192.168.205.11 <none> Ubuntu 16.04.6 LTS 4.4.0-159-generic docker://17.3.3Potom nastavte port kubelet (v našom prípade 10250):
// any machine
$ kubectl get nodes k8s-node-1 -o jsonpath='{.status.daemonEndpoints.kubeletEndpoint}'
map[Port:10250]
Teraz je čas otestovať sieť. Existuje spojenie s pracovným uzlom (192.168.205.11)? To je! Ak „zabijete“ proces exec, zmizne, takže viem, že spojenie nadviazal api-server v dôsledku vykonaného príkazu exec.
// master node
$ netstat -atn |grep 192.168.205.11
tcp 0 0 192.168.205.10:37870 192.168.205.11:10250 ESTABLISHED
…
Spojenie medzi kubectl a api-serverom je stále otvorené. Okrem toho existuje ďalšie prepojenie spájajúce api-server a kubelet.
3. Aktivita na pracovnom uzle
Teraz sa pripojíme k pracovnému uzlu a uvidíme, čo sa na ňom deje.
Predovšetkým vidíme, že je nadviazané aj spojenie s ním (druhý riadok); 192.168.205.10 je adresa IP hlavného uzla:
// worker node
$ netstat -atn |grep 10250
tcp6 0 0 :::10250 :::* LISTEN
tcp6 0 0 192.168.205.11:10250 192.168.205.10:37870 ESTABLISHED
A čo náš tím sleep? Hurá, aj ona je tam!
// worker node
$ ps -afx
...
31463 ? Sl 0:00 _ docker-containerd-shim 7d974065bbb3107074ce31c51f5ef40aea8dcd535ae11a7b8f2dd180b8ed583a /var/run/docker/libcontainerd/7d974065bbb3107074ce31c51
31478 pts/0 Ss 0:00 _ sh
31485 pts/0 S+ 0:00 _ sleep 5000
…Ale počkaj, ako to kubelet vytiahol? Kubelet má démona, ktorý otvára prístup k API cez port pre požiadavky api-server:
// Server is the library interface to serve the stream requests.
type Server interface {
http.Handler
// Get the serving URL for the requests.
// Requests must not be nil. Responses may be nil iff an error is returned.
GetExec(*runtimeapi.ExecRequest) (*runtimeapi.ExecResponse, error)
GetAttach(req *runtimeapi.AttachRequest) (*runtimeapi.AttachResponse, error)
GetPortForward(*runtimeapi.PortForwardRequest) (*runtimeapi.PortForwardResponse, error)
// Start the server.
// addr is the address to serve on (address:port) stayUp indicates whether the server should
// listen until Stop() is called, or automatically stop after all expected connections are
// closed. Calling Get{Exec,Attach,PortForward} increments the expected connection count.
// Function does not return until the server is stopped.
Start(stayUp bool) error
// Stop the server, and terminate any open connections.
Stop() error
}()
Kubelet vypočítava koncový bod odpovede pre požiadavky exec:
func (s *server) GetExec(req *runtimeapi.ExecRequest) (*runtimeapi.ExecResponse, error) {
if err := validateExecRequest(req); err != nil {
return nil, err
}
token, err := s.cache.Insert(req)
if err != nil {
return nil, err
}
return &runtimeapi.ExecResponse{
Url: s.buildURL("exec", token),
}, nil
}()
Nezamieňajte. Nevracia výsledok príkazu, ale koncový bod pripojenia:
type ExecResponse struct {
// Fully qualified URL of the exec streaming server.
Url string `protobuf:"bytes,1,opt,name=url,proto3" json:"url,omitempty"`
XXX_NoUnkeyedLiteral struct{} `json:"-"`
XXX_sizecache int32 `json:"-"`
}()
Kubelet implementuje rozhranie RuntimeServiceClient, ktorý je súčasťou rozhrania Container Runtime Interface (viac sme o tom písali napr. - približne. preklad.):
Dlhý výpis z cri-api v kubernetes/kubernetes
// For semantics around ctx use and closing/ending streaming RPCs, please refer to https://godoc.org/google.golang.org/grpc#ClientConn.NewStream.
type RuntimeServiceClient interface {
// Version returns the runtime name, runtime version, and runtime API version.
Version(ctx context.Context, in *VersionRequest, opts ...grpc.CallOption) (*VersionResponse, error)
// RunPodSandbox creates and starts a pod-level sandbox. Runtimes must ensure
// the sandbox is in the ready state on success.
RunPodSandbox(ctx context.Context, in *RunPodSandboxRequest, opts ...grpc.CallOption) (*RunPodSandboxResponse, error)
// StopPodSandbox stops any running process that is part of the sandbox and
// reclaims network resources (e.g., IP addresses) allocated to the sandbox.
// If there are any running containers in the sandbox, they must be forcibly
// terminated.
// This call is idempotent, and must not return an error if all relevant
// resources have already been reclaimed. kubelet will call StopPodSandbox
// at least once before calling RemovePodSandbox. It will also attempt to
// reclaim resources eagerly, as soon as a sandbox is not needed. Hence,
// multiple StopPodSandbox calls are expected.
StopPodSandbox(ctx context.Context, in *StopPodSandboxRequest, opts ...grpc.CallOption) (*StopPodSandboxResponse, error)
// RemovePodSandbox removes the sandbox. If there are any running containers
// in the sandbox, they must be forcibly terminated and removed.
// This call is idempotent, and must not return an error if the sandbox has
// already been removed.
RemovePodSandbox(ctx context.Context, in *RemovePodSandboxRequest, opts ...grpc.CallOption) (*RemovePodSandboxResponse, error)
// PodSandboxStatus returns the status of the PodSandbox. If the PodSandbox is not
// present, returns an error.
PodSandboxStatus(ctx context.Context, in *PodSandboxStatusRequest, opts ...grpc.CallOption) (*PodSandboxStatusResponse, error)
// ListPodSandbox returns a list of PodSandboxes.
ListPodSandbox(ctx context.Context, in *ListPodSandboxRequest, opts ...grpc.CallOption) (*ListPodSandboxResponse, error)
// CreateContainer creates a new container in specified PodSandbox
CreateContainer(ctx context.Context, in *CreateContainerRequest, opts ...grpc.CallOption) (*CreateContainerResponse, error)
// StartContainer starts the container.
StartContainer(ctx context.Context, in *StartContainerRequest, opts ...grpc.CallOption) (*StartContainerResponse, error)
// StopContainer stops a running container with a grace period (i.e., timeout).
// This call is idempotent, and must not return an error if the container has
// already been stopped.
// TODO: what must the runtime do after the grace period is reached?
StopContainer(ctx context.Context, in *StopContainerRequest, opts ...grpc.CallOption) (*StopContainerResponse, error)
// RemoveContainer removes the container. If the container is running, the
// container must be forcibly removed.
// This call is idempotent, and must not return an error if the container has
// already been removed.
RemoveContainer(ctx context.Context, in *RemoveContainerRequest, opts ...grpc.CallOption) (*RemoveContainerResponse, error)
// ListContainers lists all containers by filters.
ListContainers(ctx context.Context, in *ListContainersRequest, opts ...grpc.CallOption) (*ListContainersResponse, error)
// ContainerStatus returns status of the container. If the container is not
// present, returns an error.
ContainerStatus(ctx context.Context, in *ContainerStatusRequest, opts ...grpc.CallOption) (*ContainerStatusResponse, error)
// UpdateContainerResources updates ContainerConfig of the container.
UpdateContainerResources(ctx context.Context, in *UpdateContainerResourcesRequest, opts ...grpc.CallOption) (*UpdateContainerResourcesResponse, error)
// ReopenContainerLog asks runtime to reopen the stdout/stderr log file
// for the container. This is often called after the log file has been
// rotated. If the container is not running, container runtime can choose
// to either create a new log file and return nil, or return an error.
// Once it returns error, new container log file MUST NOT be created.
ReopenContainerLog(ctx context.Context, in *ReopenContainerLogRequest, opts ...grpc.CallOption) (*ReopenContainerLogResponse, error)
// ExecSync runs a command in a container synchronously.
ExecSync(ctx context.Context, in *ExecSyncRequest, opts ...grpc.CallOption) (*ExecSyncResponse, error)
// Exec prepares a streaming endpoint to execute a command in the container.
Exec(ctx context.Context, in *ExecRequest, opts ...grpc.CallOption) (*ExecResponse, error)
// Attach prepares a streaming endpoint to attach to a running container.
Attach(ctx context.Context, in *AttachRequest, opts ...grpc.CallOption) (*AttachResponse, error)
// PortForward prepares a streaming endpoint to forward ports from a PodSandbox.
PortForward(ctx context.Context, in *PortForwardRequest, opts ...grpc.CallOption) (*PortForwardResponse, error)
// ContainerStats returns stats of the container. If the container does not
// exist, the call returns an error.
ContainerStats(ctx context.Context, in *ContainerStatsRequest, opts ...grpc.CallOption) (*ContainerStatsResponse, error)
// ListContainerStats returns stats of all running containers.
ListContainerStats(ctx context.Context, in *ListContainerStatsRequest, opts ...grpc.CallOption) (*ListContainerStatsResponse, error)
// UpdateRuntimeConfig updates the runtime configuration based on the given request.
UpdateRuntimeConfig(ctx context.Context, in *UpdateRuntimeConfigRequest, opts ...grpc.CallOption) (*UpdateRuntimeConfigResponse, error)
// Status returns the status of the runtime.
Status(ctx context.Context, in *StatusRequest, opts ...grpc.CallOption) (*StatusResponse, error)
}
()
Iba používa gRPC na volanie metódy prostredníctvom rozhrania Container Runtime Interface:
type runtimeServiceClient struct {
cc *grpc.ClientConn
}()
func (c *runtimeServiceClient) Exec(ctx context.Context, in *ExecRequest, opts ...grpc.CallOption) (*ExecResponse, error) {
out := new(ExecResponse)
err := c.cc.Invoke(ctx, "/runtime.v1alpha2.RuntimeService/Exec", in, out, opts...)
if err != nil {
return nil, err
}
return out, nil
}()
Za implementáciu zodpovedá Container Runtime RuntimeServiceServer:
Dlhý výpis z cri-api v kubernetes/kubernetes
// RuntimeServiceServer is the server API for RuntimeService service.
type RuntimeServiceServer interface {
// Version returns the runtime name, runtime version, and runtime API version.
Version(context.Context, *VersionRequest) (*VersionResponse, error)
// RunPodSandbox creates and starts a pod-level sandbox. Runtimes must ensure
// the sandbox is in the ready state on success.
RunPodSandbox(context.Context, *RunPodSandboxRequest) (*RunPodSandboxResponse, error)
// StopPodSandbox stops any running process that is part of the sandbox and
// reclaims network resources (e.g., IP addresses) allocated to the sandbox.
// If there are any running containers in the sandbox, they must be forcibly
// terminated.
// This call is idempotent, and must not return an error if all relevant
// resources have already been reclaimed. kubelet will call StopPodSandbox
// at least once before calling RemovePodSandbox. It will also attempt to
// reclaim resources eagerly, as soon as a sandbox is not needed. Hence,
// multiple StopPodSandbox calls are expected.
StopPodSandbox(context.Context, *StopPodSandboxRequest) (*StopPodSandboxResponse, error)
// RemovePodSandbox removes the sandbox. If there are any running containers
// in the sandbox, they must be forcibly terminated and removed.
// This call is idempotent, and must not return an error if the sandbox has
// already been removed.
RemovePodSandbox(context.Context, *RemovePodSandboxRequest) (*RemovePodSandboxResponse, error)
// PodSandboxStatus returns the status of the PodSandbox. If the PodSandbox is not
// present, returns an error.
PodSandboxStatus(context.Context, *PodSandboxStatusRequest) (*PodSandboxStatusResponse, error)
// ListPodSandbox returns a list of PodSandboxes.
ListPodSandbox(context.Context, *ListPodSandboxRequest) (*ListPodSandboxResponse, error)
// CreateContainer creates a new container in specified PodSandbox
CreateContainer(context.Context, *CreateContainerRequest) (*CreateContainerResponse, error)
// StartContainer starts the container.
StartContainer(context.Context, *StartContainerRequest) (*StartContainerResponse, error)
// StopContainer stops a running container with a grace period (i.e., timeout).
// This call is idempotent, and must not return an error if the container has
// already been stopped.
// TODO: what must the runtime do after the grace period is reached?
StopContainer(context.Context, *StopContainerRequest) (*StopContainerResponse, error)
// RemoveContainer removes the container. If the container is running, the
// container must be forcibly removed.
// This call is idempotent, and must not return an error if the container has
// already been removed.
RemoveContainer(context.Context, *RemoveContainerRequest) (*RemoveContainerResponse, error)
// ListContainers lists all containers by filters.
ListContainers(context.Context, *ListContainersRequest) (*ListContainersResponse, error)
// ContainerStatus returns status of the container. If the container is not
// present, returns an error.
ContainerStatus(context.Context, *ContainerStatusRequest) (*ContainerStatusResponse, error)
// UpdateContainerResources updates ContainerConfig of the container.
UpdateContainerResources(context.Context, *UpdateContainerResourcesRequest) (*UpdateContainerResourcesResponse, error)
// ReopenContainerLog asks runtime to reopen the stdout/stderr log file
// for the container. This is often called after the log file has been
// rotated. If the container is not running, container runtime can choose
// to either create a new log file and return nil, or return an error.
// Once it returns error, new container log file MUST NOT be created.
ReopenContainerLog(context.Context, *ReopenContainerLogRequest) (*ReopenContainerLogResponse, error)
// ExecSync runs a command in a container synchronously.
ExecSync(context.Context, *ExecSyncRequest) (*ExecSyncResponse, error)
// Exec prepares a streaming endpoint to execute a command in the container.
Exec(context.Context, *ExecRequest) (*ExecResponse, error)
// Attach prepares a streaming endpoint to attach to a running container.
Attach(context.Context, *AttachRequest) (*AttachResponse, error)
// PortForward prepares a streaming endpoint to forward ports from a PodSandbox.
PortForward(context.Context, *PortForwardRequest) (*PortForwardResponse, error)
// ContainerStats returns stats of the container. If the container does not
// exist, the call returns an error.
ContainerStats(context.Context, *ContainerStatsRequest) (*ContainerStatsResponse, error)
// ListContainerStats returns stats of all running containers.
ListContainerStats(context.Context, *ListContainerStatsRequest) (*ListContainerStatsResponse, error)
// UpdateRuntimeConfig updates the runtime configuration based on the given request.
UpdateRuntimeConfig(context.Context, *UpdateRuntimeConfigRequest) (*UpdateRuntimeConfigResponse, error)
// Status returns the status of the runtime.
Status(context.Context, *StatusRequest) (*StatusResponse, error)
}
()
Ak áno, mali by sme vidieť spojenie medzi kubeletom a runtime kontajnera, však? Skontrolujme to.
Spustite tento príkaz pred a po príkaze exec a uvidíte rozdiel. V mojom prípade je rozdiel:
// worker node
$ ss -a -p |grep kubelet
...
u_str ESTAB 0 0 * 157937 * 157387 users:(("kubelet",pid=5714,fd=33))
...Hmmm... Nové unixové soketové spojenie medzi kubeletom (pid=5714) a niečím neznámym. čo by to mohlo byť? Správne, je to Docker (pid=1186)!
// worker node
$ ss -a -p |grep 157387
...
u_str ESTAB 0 0 * 157937 * 157387 users:(("kubelet",pid=5714,fd=33))
u_str ESTAB 0 0 /var/run/docker.sock 157387 * 157937 users:(("dockerd",pid=1186,fd=14))
...Ako si pamätáte, toto je proces démona docker (pid=1186), ktorý vykoná náš príkaz:
// worker node
$ ps -afx
...
1186 ? Ssl 0:55 /usr/bin/dockerd -H fd://
17784 ? Sl 0:00 _ docker-containerd-shim 53a0a08547b2f95986402d7f3b3e78702516244df049ba6c5aa012e81264aa3c /var/run/docker/libcontainerd/53a0a08547b2f95986402d7f3
17801 pts/2 Ss 0:00 _ sh
17827 pts/2 S+ 0:00 _ sleep 5000
...4. Aktivita v kontajneri runtime
Poďme preskúmať zdrojový kód CRI-O, aby sme pochopili, čo sa deje. V Dockeri je logika podobná.
Za implementáciu je zodpovedný server RuntimeServiceServer:
// Server implements the RuntimeService and ImageService
type Server struct {
config libconfig.Config
seccompProfile *seccomp.Seccomp
stream StreamService
netPlugin ocicni.CNIPlugin
hostportManager hostport.HostPortManager
appArmorProfile string
hostIP string
bindAddress string
*lib.ContainerServer
monitorsChan chan struct{}
defaultIDMappings *idtools.IDMappings
systemContext *types.SystemContext // Never nil
updateLock sync.RWMutex
seccompEnabled bool
appArmorEnabled bool
}()
// Exec prepares a streaming endpoint to execute a command in the container.
func (s *Server) Exec(ctx context.Context, req *pb.ExecRequest) (resp *pb.ExecResponse, err error) {
const operation = "exec"
defer func() {
recordOperation(operation, time.Now())
recordError(operation, err)
}()
resp, err = s.getExec(req)
if err != nil {
return nil, fmt.Errorf("unable to prepare exec endpoint: %v", err)
}
return resp, nil
}()
Na konci reťazca spúšťací modul kontajnera vykoná príkaz na pracovnom uzle:
// ExecContainer prepares a streaming endpoint to execute a command in the container.
func (r *runtimeOCI) ExecContainer(c *Container, cmd []string, stdin io.Reader, stdout, stderr io.WriteCloser, tty bool, resize <-chan remotecommand.TerminalSize) error {
processFile, err := prepareProcessExec(c, cmd, tty)
if err != nil {
return err
}
defer os.RemoveAll(processFile.Name())
args := []string{rootFlag, r.root, "exec"}
args = append(args, "--process", processFile.Name(), c.ID())
execCmd := exec.Command(r.path, args...)
if v, found := os.LookupEnv("XDG_RUNTIME_DIR"); found {
execCmd.Env = append(execCmd.Env, fmt.Sprintf("XDG_RUNTIME_DIR=%s", v))
}
var cmdErr, copyError error
if tty {
cmdErr = ttyCmd(execCmd, stdin, stdout, resize)
} else {
if stdin != nil {
// Use an os.Pipe here as it returns true *os.File objects.
// This way, if you run 'kubectl exec <pod> -i bash' (no tty) and type 'exit',
// the call below to execCmd.Run() can unblock because its Stdin is the read half
// of the pipe.
r, w, err := os.Pipe()
if err != nil {
return err
}
go func() { _, copyError = pools.Copy(w, stdin) }()
execCmd.Stdin = r
}
if stdout != nil {
execCmd.Stdout = stdout
}
if stderr != nil {
execCmd.Stderr = stderr
}
cmdErr = execCmd.Run()
}
if copyError != nil {
return copyError
}
if exitErr, ok := cmdErr.(*exec.ExitError); ok {
return &utilexec.ExitErrorWrapper{ExitError: exitErr}
}
return cmdErr
}()
Nakoniec jadro vykoná príkazy:
Pripomienky
- Server API môže tiež inicializovať pripojenie ku kubeletu.
- Nasledujúce pripojenia pretrvávajú až do konca interaktívnej relácie exec:
- medzi kubectl a api-serverom;
- medzi api-serverom a kubectl;
- medzi kubeletom a časom prevádzky kontajnera.
- Kubectl alebo api-server nemôže nič spustiť na pracovných uzloch. Kubelet môže byť spustený, ale pri týchto akciách interaguje aj s runtime kontajnera.
zdroje
- diskusia "» v kubernetes-dev;
- Článok "»;
- diskusia "» pri chybe servera.
PS od prekladateľa
Prečítajte si aj na našom blogu:
- "Čo sa stane v Kubernetes, keď spustíte kubectl run?" и ;
- «»;
- «»;
- «".
Zdroj: hab.com