Predgovor ali kako je nastala ideja o sekcioniranju
Zgodba se začne tukaj: Potem ko so bili takrat izčrpani skoraj vsi viri za optimizacijo zahteve, se je postavilo vprašanje - kaj naprej? Tako se je porodila ideja o razdelitvi.
Lirična digresija:
Ravno 'tisti trenutek', saj . Hvala in Habru!
Kako drugače lahko osrečite stranko in hkrati izboljšate svoje sposobnosti?
Da vse čim bolj poenostavimo, potem obstajata samo dva načina za radikalno izboljšanje delovanja baze podatkov:
1) Obsežna pot - povečamo sredstva, spremenimo konfiguracijo;
2) Intenzivna pot - optimizacija poizvedb
Ker, ponavljam, takrat ni bilo več jasno, kaj še spremeniti v zahtevi za pospešitev, je bila izbrana pot - spremembe dizajna mize.
Postavlja se torej glavno vprašanje: kaj in kako bomo spremenili?
Začetni pogoji
Prvič, tu je ta ERD (prikazan pogojno poenostavljeno):
Glavne značilnosti:
- odnosi mnogo proti mnogo
- tabela že ima potencialni particijski ključ
Prvotna zahteva:
SELECT
p."PARAMETER_ID" as parameter_id,
pc."PC_NAME" AS pc_name,
pc."CUSTOMER_PARTNUMBER" AS customer_partnumber,
w."LASERMARK" AS lasermark,
w."LOTID" AS lotid,
w."REPORTED_VALUE" AS reported_value,
w."LOWER_SPEC_LIMIT" AS lower_spec_limit,
w."UPPER_SPEC_LIMIT" AS upper_spec_limit,
p."TYPE_CALCUL" AS type_calcul,
s."SHIPMENT_NAME" AS shipment_name,
s."SHIPMENT_DATE" AS shipment_date,
extract(year from s."SHIPMENT_DATE") AS year,
extract(month from s."SHIPMENT_DATE") as month,
s."REPORT_NAME" AS report_name,
p."SPARAM_NAME" AS SPARAM_name,
p."CUSTOMERPARAM_NAME" AS customerparam_name
FROM data w INNER JOIN shipment s ON s."SHIPMENT_ID" = w."SHIPMENT_ID"
INNER JOIN parameters p ON p."PARAMETER_ID" = w."PARAMETER_ID"
INNER JOIN shipment_pc sp ON s."SHIPMENT_ID" = sp."SHIPMENT_ID"
INNER JOIN pc pc ON pc."PC_ID" = sp."PC_ID"
INNER JOIN ( SELECT w2."LASERMARK" , MAX(s2."SHIPMENT_DATE") AS "SHIPMENT_DATE"
FROM shipment s2 INNER JOIN data w2 ON s2."SHIPMENT_ID" = w2."SHIPMENT_ID"
GROUP BY w2."LASERMARK"
) md ON md."SHIPMENT_DATE" = s."SHIPMENT_DATE" AND md."LASERMARK" = w."LASERMARK"
WHERE
s."SHIPMENT_DATE" >= '2018-07-01' AND s."SHIPMENT_DATE" <= '2018-09-30' ;
Rezultati izvedbe na testni bazi:
strošek : 502 997.55
Čas izvedbe: 505 sekund.
Kaj vidimo? Redna zahteva, ki temelji na časovnem odseku.
Naredimo najpreprostejšo logično predpostavko: če obstaja vzorec časovne rezine, nam bo pomagal? Tako je – pregrajevanje.
Kaj razdeliti?
Na prvi pogled je izbira očitna - deklarativno particioniranje tabele “shipment” s ključem “SHIPMENT_DATE” (skakanje preveč naprej – na koncu se je pri izdelavi izkazalo malo narobe).
Kako razdeliti?
Tudi to vprašanje ni pretežko. Na srečo je v PostgreSQL 10 zdaj mehanizem za človeško particioniranje.
Torej:
- Shrani izpis izvorne tabele - pg_dump izvorna_tabela
- Izbriši izvirno tabelo - spustite tabelo izvorna_tabela
- Ustvarite nadrejeno tabelo s particioniranjem obsega - ustvari tabelo izvorna_tabela
- Ustvari razdelke - ustvari tabelo izvorna_tabela, ustvari indeks
- Uvozi izpis, ustvarjen v 1. koraku – pg_restore
Skripte za particioniranje
Zaradi preprostosti in priročnosti so bili koraki 2,3,4, XNUMX, XNUMX združeni v en skript.
Torej:
Shranite izpis izvorne tabele
pg_dump postgres --file=/dump/shipment.dmp --format=c --table=shipment --verbose > /dump/shipment.log 2>&1Izbrišite izvorno tabelo + Ustvarite nadrejeno tabelo s particioniranjem obsega + Ustvarite particije
--create_partition_shipment.sql
do language plpgsql $$
declare
rec_shipment_date RECORD ;
partition_name varchar;
index_name varchar;
current_year varchar ;
current_month varchar ;
begin_year varchar ;
begin_month varchar ;
next_year varchar ;
next_month varchar ;
first_flag boolean ;
i integer ;
begin
RAISE NOTICE 'CREATE TEMPORARY TABLE FOR SHIPMENT_DATE';
CREATE TEMP TABLE tmp_shipment_date as select distinct "SHIPMENT_DATE" from shipment order by "SHIPMENT_DATE" ;
RAISE NOTICE 'DROP TABLE shipment';
drop table shipment cascade ;
CREATE TABLE public.shipment
(
"SHIPMENT_ID" integer NOT NULL DEFAULT nextval('shipment_shipment_id_seq'::regclass),
"SHIPMENT_NAME" character varying(30) COLLATE pg_catalog."default",
"SHIPMENT_DATE" timestamp without time zone,
"REPORT_NAME" character varying(40) COLLATE pg_catalog."default"
)
PARTITION BY RANGE ("SHIPMENT_DATE")
WITH (
OIDS = FALSE
)
TABLESPACE pg_default;
RAISE NOTICE 'CREATE PARTITIONS FOR TABLE shipment';
current_year:='0';
current_month:='0';
begin_year := '0' ;
begin_month := '0' ;
next_year := '0' ;
next_month := '0' ;
FOR rec_shipment_date IN SELECT * FROM tmp_shipment_date LOOP
RAISE NOTICE 'SHIPMENT_DATE=%',rec_shipment_date."SHIPMENT_DATE";
current_year := date_part('year' ,rec_shipment_date."SHIPMENT_DATE");
current_month := date_part('month' ,rec_shipment_date."SHIPMENT_DATE") ;
IF to_number(current_month,'99') < 10 THEN
current_month := '0'||current_month ;
END IF ;
--Init borders
IF begin_year = '0' THEN
first_flag := true ; --first time flag
begin_year := current_year ;
begin_month := current_month ;
IF current_month = '12' THEN
next_year := date_part('year' ,rec_shipment_date."SHIPMENT_DATE" + interval '1 year') ;
ELSE
next_year := current_year ;
END IF;
next_month := date_part('month' ,rec_shipment_date."SHIPMENT_DATE" + interval '1 month') ;
END IF;
-- Check current date into borders NOT for First time
IF to_date( current_year||'.'||current_month, 'YYYY.MM') >= to_date( begin_year||'.'||begin_month, 'YYYY.MM') AND
to_date( current_year||'.'||current_month, 'YYYY.MM') < to_date( next_year||'.'||next_month, 'YYYY.MM') AND
NOT first_flag
THEN
CONTINUE ;
ELSE
--NEW borders only for second and after time
begin_year := current_year ;
begin_month := current_month ;
IF current_month = '12' THEN
next_year := date_part('year' ,rec_shipment_date."SHIPMENT_DATE" + interval '1 year') ;
ELSE
next_year := current_year ;
END IF;
next_month := date_part('month' ,rec_shipment_date."SHIPMENT_DATE" + interval '1 month') ;
END IF;
partition_name := 'shipment_shipment_date_'||begin_year||'-'||begin_month||'-01-'|| next_year||'-'||next_month||'-01' ;
EXECUTE format('CREATE TABLE ' || quote_ident(partition_name) || ' PARTITION OF shipment FOR VALUES FROM ( %L ) TO ( %L ) ' , current_year||'-'||current_month||'-01' , next_year||'-'||next_month||'-01' ) ;
index_name := partition_name||'_shipment_id_idx';
RAISE NOTICE 'INDEX NAME =%',index_name;
EXECUTE format('CREATE INDEX ' || quote_ident(index_name) || ' ON '|| quote_ident(partition_name) ||' USING btree ("SHIPMENT_ID") TABLESPACE pg_default ' ) ;
--Drop first time flag
first_flag := false ;
END LOOP;
end
$$;Uvažanje odlagališča
pg_restore -d postgres --data-only --format=c --table=shipment --verbose shipment.dmp > /tmp/data_dump/shipment_restore.log 2>&1Preverjanje rezultatov particioniranja
Kaj imamo kot rezultat? Celotno besedilo izvedbenega načrta je veliko in dolgočasno, zato se je povsem mogoče omejiti na končne številke.
Bil je
Cena: 502 997.55
Čas izvedbe: 505 sekund.
Je postalo
Cena: 77 872.36
Čas izvedbe: 79 sekund.
Kar dober rezultat. Zmanjšani stroški in čas izvedbe. Tako uporaba particioniranja daje pričakovan učinek in na splošno ni presenečenj.
Osrečite stranko
Rezultati testiranja so bili predstavljeni stranki v pregled. In po pregledu so dobili nekoliko nepričakovano razsodbo: »Super, razdelite tabelo »podatki«.
Da, vendar smo preučili popolnoma drugačno tabelo »pošiljke«; tabela »podatki« nima polja »DATUM_POŠILKE«.
Ni problema, dodaj, spremeni. Glavna stvar je, da je stranka zadovoljna z rezultatom, podrobnosti izvedbe niso posebej pomembne.
Particioniranje glavne tabele »podatki«
Na splošno ni bilo posebnih težav. Čeprav se je algoritem particioniranja seveda nekoliko spremenil.
Dodajanje stolpca »SHIPMENT_DATA« v tabelo »data«.
psql -h хост -U база -d юзер
=> ALTER TABLE data ADD COLUMN "SHIPMENT_DATE" timestamp without time zone ;Izpolnite vrednosti stolpca »PODATKI_POŠILJKE« v tabeli »podatki« z vrednostmi istoimenskega stolpca iz tabele »pošiljka«
-----------------------------
--update_data.sql
--updating for altered table "data" to values of "shipment_data" from the table "shipment"
--version 1.0
do language plpgsql $$
declare
rec_shipment_data RECORD ;
shipment_date timestamp without time zone ;
row_count integer ;
total_rows integer ;
begin
select count(*) into total_rows from shipment ;
RAISE NOTICE 'Total %',total_rows;
row_count:= 0 ;
FOR rec_shipment_data IN SELECT * FROM shipment LOOP
update data set "SHIPMENT_DATE" = rec_shipment_data."SHIPMENT_DATE" where "SHIPMENT_ID" = rec_shipment_data."SHIPMENT_ID";
row_count:= row_count +1 ;
RAISE NOTICE 'row count = % , from %',row_count,total_rows;
END LOOP;
end
$$;Shranite izpis tabele »podatki«.
pg_dump postgres --file=/dump/data.dmp --format=c --table=data --verbose > /dump/data.log 2>&1</sourcePonovno ustvarite particionirano tabelo »podatki«
--create_partition_data.sql
--create partitions for the table "wafer data" by range column "shipment_data" with one month duration
--version 1.0
do language plpgsql $$
declare
rec_shipment_date RECORD ;
partition_name varchar;
index_name varchar;
current_year varchar ;
current_month varchar ;
begin_year varchar ;
begin_month varchar ;
next_year varchar ;
next_month varchar ;
first_flag boolean ;
i integer ;
begin
RAISE NOTICE 'CREATE TEMPORARY TABLE FOR SHIPMENT_DATE';
CREATE TEMP TABLE tmp_shipment_date as select distinct "SHIPMENT_DATE" from shipment order by "SHIPMENT_DATE" ;
RAISE NOTICE 'DROP TABLE data';
drop table data cascade ;
RAISE NOTICE 'CREATE PARTITIONED TABLE data';
CREATE TABLE public.data
(
"RUN_ID" integer,
"LASERMARK" character varying(20) COLLATE pg_catalog."default" NOT NULL,
"LOTID" character varying(80) COLLATE pg_catalog."default",
"SHIPMENT_ID" integer NOT NULL,
"PARAMETER_ID" integer NOT NULL,
"INTERNAL_VALUE" character varying(75) COLLATE pg_catalog."default",
"REPORTED_VALUE" character varying(75) COLLATE pg_catalog."default",
"LOWER_SPEC_LIMIT" numeric,
"UPPER_SPEC_LIMIT" numeric ,
"SHIPMENT_DATE" timestamp without time zone
)
PARTITION BY RANGE ("SHIPMENT_DATE")
WITH (
OIDS = FALSE
)
TABLESPACE pg_default ;
RAISE NOTICE 'CREATE PARTITIONS FOR TABLE data';
current_year:='0';
current_month:='0';
begin_year := '0' ;
begin_month := '0' ;
next_year := '0' ;
next_month := '0' ;
i := 1;
FOR rec_shipment_date IN SELECT * FROM tmp_shipment_date LOOP
RAISE NOTICE 'SHIPMENT_DATE=%',rec_shipment_date."SHIPMENT_DATE";
current_year := date_part('year' ,rec_shipment_date."SHIPMENT_DATE");
current_month := date_part('month' ,rec_shipment_date."SHIPMENT_DATE") ;
--Init borders
IF begin_year = '0' THEN
RAISE NOTICE '***Init borders';
first_flag := true ; --first time flag
begin_year := current_year ;
begin_month := current_month ;
IF current_month = '12' THEN
next_year := date_part('year' ,rec_shipment_date."SHIPMENT_DATE" + interval '1 year') ;
ELSE
next_year := current_year ;
END IF;
next_month := date_part('month' ,rec_shipment_date."SHIPMENT_DATE" + interval '1 month') ;
END IF;
-- RAISE NOTICE 'current_year=% , current_month=% ',current_year,current_month;
-- RAISE NOTICE 'begin_year=% , begin_month=% ',begin_year,begin_month;
-- RAISE NOTICE 'next_year=% , next_month=% ',next_year,next_month;
-- Check current date into borders NOT for First time
RAISE NOTICE 'Current data = %',to_char( to_date( current_year||'.'||current_month, 'YYYY.MM'), 'YYYY.MM');
RAISE NOTICE 'Begin data = %',to_char( to_date( begin_year||'.'||begin_month, 'YYYY.MM'), 'YYYY.MM');
RAISE NOTICE 'Next data = %',to_char( to_date( next_year||'.'||next_month, 'YYYY.MM'), 'YYYY.MM');
IF to_date( current_year||'.'||current_month, 'YYYY.MM') >= to_date( begin_year||'.'||begin_month, 'YYYY.MM') AND
to_date( current_year||'.'||current_month, 'YYYY.MM') < to_date( next_year||'.'||next_month, 'YYYY.MM') AND
NOT first_flag
THEN
RAISE NOTICE '***CONTINUE';
CONTINUE ;
ELSE
--NEW borders only for second and after time
RAISE NOTICE '***NEW BORDERS';
begin_year := current_year ;
begin_month := current_month ;
IF current_month = '12' THEN
next_year := date_part('year' ,rec_shipment_date."SHIPMENT_DATE" + interval '1 year') ;
ELSE
next_year := current_year ;
END IF;
next_month := date_part('month' ,rec_shipment_date."SHIPMENT_DATE" + interval '1 month') ;
END IF;
IF to_number(current_month,'99') < 10 THEN
current_month := '0'||current_month ;
END IF ;
IF to_number(begin_month,'99') < 10 THEN
begin_month := '0'||begin_month ;
END IF ;
IF to_number(next_month,'99') < 10 THEN
next_month := '0'||next_month ;
END IF ;
RAISE NOTICE 'current_year=% , current_month=% ',current_year,current_month;
RAISE NOTICE 'begin_year=% , begin_month=% ',begin_year,begin_month;
RAISE NOTICE 'next_year=% , next_month=% ',next_year,next_month;
partition_name := 'data_'||begin_year||begin_month||'01_'||next_year||next_month||'01' ;
RAISE NOTICE 'PARTITION NUMBER % , TABLE NAME =%',i , partition_name;
EXECUTE format('CREATE TABLE ' || quote_ident(partition_name) || ' PARTITION OF data FOR VALUES FROM ( %L ) TO ( %L ) ' , begin_year||'-'||begin_month||'-01' , next_year||'-'||next_month||'-01' ) ;
index_name := partition_name||'_shipment_id_parameter_id_idx';
RAISE NOTICE 'INDEX NAME =%',index_name;
EXECUTE format('CREATE INDEX ' || quote_ident(index_name) || ' ON '|| quote_ident(partition_name) ||' USING btree ("SHIPMENT_ID", "PARAMETER_ID") TABLESPACE pg_default ' ) ;
index_name := partition_name||'_lasermark_idx';
RAISE NOTICE 'INDEX NAME =%',index_name;
EXECUTE format('CREATE INDEX ' || quote_ident(index_name) || ' ON '|| quote_ident(partition_name) ||' USING btree ("LASERMARK" COLLATE pg_catalog."default") TABLESPACE pg_default ' ) ;
index_name := partition_name||'_shipment_id_idx';
RAISE NOTICE 'INDEX NAME =%',index_name;
EXECUTE format('CREATE INDEX ' || quote_ident(index_name) || ' ON '|| quote_ident(partition_name) ||' USING btree ("SHIPMENT_ID") TABLESPACE pg_default ' ) ;
index_name := partition_name||'_parameter_id_idx';
RAISE NOTICE 'INDEX NAME =%',index_name;
EXECUTE format('CREATE INDEX ' || quote_ident(index_name) || ' ON '|| quote_ident(partition_name) ||' USING btree ("PARAMETER_ID") TABLESPACE pg_default ' ) ;
index_name := partition_name||'_shipment_date_idx';
RAISE NOTICE 'INDEX NAME =%',index_name;
EXECUTE format('CREATE INDEX ' || quote_ident(index_name) || ' ON '|| quote_ident(partition_name) ||' USING btree ("SHIPMENT_DATE") TABLESPACE pg_default ' ) ;
--Drop first time flag
first_flag := false ;
END LOOP;
end
$$;
Naložite izpis, ustvarjen v 3. koraku.
pg_restore -h хост -юзер -d база --data-only --format=c --table=data --verbose data.dmp > data_restore.log 2>&1Ustvarite ločen razdelek za stare podatke
---------------------------------------------------
--create_partition_for_old_dates.sql
--create partitions for keeping old dates
--version 1.0
do language plpgsql $$
declare
rec_shipment_date RECORD ;
partition_name varchar;
index_name varchar;
begin
SELECT min("SHIPMENT_DATE") AS min_date INTO rec_shipment_date from data ;
RAISE NOTICE 'Old date is %',rec_shipment_date.min_date ;
partition_name := 'data_old_dates' ;
RAISE NOTICE 'PARTITION NAME IS %',partition_name;
EXECUTE format('CREATE TABLE ' || quote_ident(partition_name) || ' PARTITION OF data FOR VALUES FROM ( %L ) TO ( %L ) ' , '1900-01-01' ,
to_char( rec_shipment_date.min_date,'YYYY')||'-'||to_char(rec_shipment_date.min_date,'MM')||'-01' ) ;
index_name := partition_name||'_shipment_id_parameter_id_idx';
EXECUTE format('CREATE INDEX ' || quote_ident(index_name) || ' ON '|| quote_ident(partition_name) ||' USING btree ("SHIPMENT_ID", "PARAMETER_ID") TABLESPACE pg_default ' ) ;
index_name := partition_name||'_lasermark_idx';
EXECUTE format('CREATE INDEX ' || quote_ident(index_name) || ' ON '|| quote_ident(partition_name) ||' USING btree ("LASERMARK" COLLATE pg_catalog."default") TABLESPACE pg_default ' ) ;
index_name := partition_name||'_shipment_id_idx';
EXECUTE format('CREATE INDEX ' || quote_ident(index_name) || ' ON '|| quote_ident(partition_name) ||' USING btree ("SHIPMENT_ID") TABLESPACE pg_default ' ) ;
index_name := partition_name||'_parameter_id_idx';
EXECUTE format('CREATE INDEX ' || quote_ident(index_name) || ' ON '|| quote_ident(partition_name) ||' USING btree ("PARAMETER_ID") TABLESPACE pg_default ' ) ;
index_name := partition_name||'_shipment_date_idx';
EXECUTE format('CREATE INDEX ' || quote_ident(index_name) || ' ON '|| quote_ident(partition_name) ||' USING btree ("SHIPMENT_DATE") TABLESPACE pg_default ' ) ;
end
$$;Končni rezultati:
Bil je
Cena: 502 997.55
Čas izvedbe: 505 sekund.
Je postalo
Cena: 68 533.70
Čas izvedbe: 69 sekund
Vredno, precej vredno. In glede na to, da nam je na tej poti uspelo bolj ali manj obvladati mehanizem particioniranja v PostgreSQL 10 - odličen rezultat.
Lirična digresija
Je mogoče še bolje – DA, LAHKO!Če želite to narediti, morate uporabiti MATERIALIZIRANI POGLED.
USTVARI MATERIALIZIRANI POGLED LASERMARK_VIEW
CREATE MATERIALIZED VIEW LASERMARK_VIEW
AS
SELECT w."LASERMARK" , MAX(s."SHIPMENT_DATE") AS "SHIPMENT_DATE"
FROM shipment s INNER JOIN data w ON s."SHIPMENT_ID" = w."SHIPMENT_ID"
GROUP BY w."LASERMARK" ;
CREATE INDEX lasermark_vw_shipment_date_ind on lasermark_view USING btree ("SHIPMENT_DATE") TABLESPACE pg_default;
analyze lasermark_view ;
Še enkrat prepisujemo zahtevo:
Poizvedba z materializiranim pogledom
SELECT
p."PARAMETER_ID" as parameter_id,
pc."PC_NAME" AS pc_name,
pc."CUSTOMER_PARTNUMBER" AS customer_partnumber,
w."LASERMARK" AS lasermark,
w."LOTID" AS lotid,
w."REPORTED_VALUE" AS reported_value,
w."LOWER_SPEC_LIMIT" AS lower_spec_limit,
w."UPPER_SPEC_LIMIT" AS upper_spec_limit,
p."TYPE_CALCUL" AS type_calcul,
s."SHIPMENT_NAME" AS shipment_name,
s."SHIPMENT_DATE" AS shipment_date,
extract(year from s."SHIPMENT_DATE") AS year,
extract(month from s."SHIPMENT_DATE") as month,
s."REPORT_NAME" AS report_name,
p."STC_NAME" AS STC_name,
p."CUSTOMERPARAM_NAME" AS customerparam_name
FROM data w INNER JOIN shipment s ON s."SHIPMENT_ID" = w."SHIPMENT_ID"
INNER JOIN parameters p ON p."PARAMETER_ID" = w."PARAMETER_ID"
INNER JOIN shipment_pc sp ON s."SHIPMENT_ID" = sp."SHIPMENT_ID"
INNER JOIN pc pc ON pc."PC_ID" = sp."PC_ID"
INNER JOIN LASERMARK_VIEW md ON md."SHIPMENT_DATE" = s."SHIPMENT_DATE" AND md."LASERMARK" = w."LASERMARK"
WHERE
s."SHIPMENT_DATE" >= '2018-07-01' AND s."SHIPMENT_DATE" <= '2018-09-30';
In dobimo še en rezultat:
Bil je
Cena: 502 997.55
Čas izvedbe: 505 sekunde
Je postalo
Cena: 42 481.16
Čas izvedbe: 43 sekund.
Čeprav je tako obetaven rezultat seveda varljiv, je treba ideje osvežiti. Skupni čas prejemanja podatkov torej ne bo veliko pomagal. Ampak kot poskus je zelo zanimivo.
Pravzaprav, kot se je izkazalo, še enkrat hvala in Habru!-
spremna beseda
Torej, stranka je zadovoljna. IN potreba izkoristiti situacijo.
Nova naloga: Kaj si lahko izmislite za poglobitev in razširitev?
In potem se spomnim - fantje, nimamo nadzora naših zbirk podatkov PostgreSQL.
Roko na srce, nekaj spremljanja še vedno obstaja v obliki Cloud Watch na AWS. Toda kakšna je korist tega spremljanja za DBA? Na splošno praktično nič.
Če imate priložnost narediti nekaj koristnega in zanimivega zase, je ne morete izkoristiti ...
ZA
Tako pridemo do najbolj zanimivega dela:
3. december 2018.
Sprejemanje odločitve za začetek raziskovanja razpoložljivih zmogljivosti za spremljanje učinkovitosti poizvedb PostgreSQL.
A to je povsem druga zgodba.
Se nadaljuje…
Vir: www.habr.com