🥇Gradnja straže in njenih odvisnosti v rpm. Namestitev straže iz rpm, osnovne nastavitve

Opis

Sentry — orodje za spremljanje izjem in napak v vaših aplikacijah.

Ključne značilnosti:

enostavno vključiti v projekt,
lovi napake v uporabnikovem brskalniku in na vašem strežniku.
Prost,
Seznam napak se posodablja v realnem času,
Če je bila napaka označena kot odpravljena in se znova pojavi, se znova ustvari in upošteva v ločeni niti,
Napake so razvrščene in prikazane po pogostosti pojavljanja,
Napake je mogoče filtrirati po statusu, viru beleženja, ravni beleženja, imenu strežnika itd.

Primerjava z dnevniki ELK: Najpomembneje je, da je v ELK vsak nov dnevnik iste vrste ločen vnos. in v sentry je vsaka nova izjema iste vrste samo + 1 k številu svojega zapisa

Sentry podpira večino programskih jezikov. Več podrobnosti tukaj.

Zagon Sentryja z dockerjem in docker-compose

Sentry lahko zaženete z dockerjem in docker-compose, kot je opisano tukaj: https://github.com/getsentry/onpremise. Toda skript zažene dodatne storitve na istem strežniku v enem načinu (brez tolerance napak) (za različico sentry 10.0.0):

datum
postgres
redis
oskrbnik živalskega vrta
kafka
klikhouse
simbolikator

Če potrebujete odpornost na napake, boste morali bodisi uporabiti načrte izdelkov v oblaku ali namestiti Sentry brez tega skripta.

Ta objava opisuje postopek gradnje Sentryja in njegovih odvisnosti v rpm. Če morate Sentry namestiti tam, kjer ni interneta, lahko iz prejetih rpm-jev naredite repozitorij yum.

Pomembna pojasnila o sestavljanju in nameščanju paketov

Nekateri paketi so odvisni drug od drugega. Zato je postopek montaže in namestitve razdeljen na več stopenj.

NAREDITI:

Ta objava pokriva izdelavo in namestitev različice Sentry 9.1.2. Ko razvijalci izdajo nekaj manjših izdaj, lahko zgradite različico Sentry 10.XY.Veliko najnovejših potrditev v master je popravkov.

Strežniške zahteve za gradnjo rpm

Več kot je procesorjev, hitreje bodo zgrajeni semafor in simbolni paketi

Izklopite Selinux

Skupnost bo naklonjena le, če nekdo napiše politike selinux za Sentry.

sudo sed -i s/^SELINUX=.*$/SELINUX=disabled/ /etc/selinux/config
sudo reboot

Povezovanje repozitorija epel-release

sudo yum install -y epel-release git

Zberemo odvisnosti v rpm pip in jih namestimo. Datoteka 1general_dependencies.sh

echo "Install dependencies"
sudo yum install -y cargo gcc gcc-c++ libffi-devel libjpeg-devel libxml2-devel 
libxslt libxslt-devel make mc openssl-devel python-devel memcached 
python-lxml python-nose python2-pip python34 rpm-build rpmdevtools 
ruby-devel rubygems zlib-devel redis xmlsec1-openssl xmlsec1 
libtool-ltdl-devel xmlsec1-devel xmlsec1-openssl-devel openldap-devel

echo "Build common pip dependencies to rpm by fpm"
gem install --no-document fpm
echo "For chardet==3.0.2 need setuptools>=12"
echo "For cryptography==2.8 need setuptools>=18.5"
fpm -s python -t rpm setuptools==18.5
sudo yum install -y python-setuptools-18.5-1.noarch.rpm
fpm -s python -t rpm --name python2-pip pip==20.0.2
sudo yum install -y python2-pip-20.0.2-1.noarch.rpm

Namestite in zaženite PostgreSQL 9.6, da zgradite python-psycopg2-binary. Datoteka 2psycopg2-binary.sh

Različico PostgreSQL lahko spremenite v skriptu.

sudo yum install -y postgresql-devel
fpm -s python -t rpm psycopg2-binary==2.7.7
sudo yum install -y python-psycopg2-binary-2.7.7-1.x86_64.rpm
sudo yum remove -y postgresql-devel postgresql postgresql-libs

Prevedite in namestite python-dateutil rpm. Datoteka 3dateutil.sh

#!/bin/bash

echo "Build and install python-dateutil rpm"
mkdir -p ~/rpmbuild/{BUILD,RPMS,SOURCES,SRPMS,SPECS}
spectool -g -R spec/python-dateutil.spec
wget https://raw.githubusercontent.com/patsevanton/sentry-rpm/master/spec/python-dateutil-system-zoneinfo.patch -P ~/rpmbuild/SOURCES
wget https://raw.githubusercontent.com/patsevanton/sentry-rpm/master/spec/python-dateutil-timelex-string.patch -P ~/rpmbuild/SOURCES
rpmbuild --bb spec/python-dateutil.spec
sudo yum install -y ~/rpmbuild/RPMS/noarch/python-dateutil-2.4.2-1.el7.noarch.rpm

Prevedite in namestite python-urllib3 rpm. Datoteka 4urllib3.sh

naslov spojlerja

echo "Build pip dependencies to rpm by fpm for urllib3"
fpm -s python -t rpm pycparser==2.19
sudo yum install -y python-pycparser-2.19-1.noarch.rpm
fpm -s python -t rpm cffi==1.14.0
sudo yum install -y python-cffi-1.14.0-1.x86_64.rpm
fpm -s python -t rpm cryptography==2.8
sudo yum install -y python-cryptography-2.8-1.x86_64.rpm
fpm -s python -t rpm idna==2.7
sudo yum install -y python-idna-2.7-1.noarch.rpm
sudo chmod +r /usr/lib/python2.7/site-packages/idna-2.7-py2.7.egg-info/PKG-INFO
fpm -s python -t rpm pyOpenSSL==19.1.0
sudo yum install -y python-pyopenssl-19.1.0-1.noarch.rpm
fpm -s python -t rpm pbr==5.4.4
sudo yum install -y python-pbr-5.4.4-1.noarch.rpm
fpm -s python -t rpm mock==2.0.0
sudo yum install -y python-mock-2.0.0-1.noarch.rpm
fpm -s python -t rpm py==1.8.1
sudo yum install -y python-py-1.8.1-1.noarch.rpm
fpm -s python -t rpm six==1.10.0
sudo yum install -y python-six-1.10.0-1.noarch.rpm
fpm -s python -t rpm pluggy==0.6.0
sudo yum install -y python-pluggy-0.6.0-1.noarch.rpm
fpm -s python -t rpm attrs==19.3.0
sudo yum install -y python-attrs-19.3.0-1.noarch.rpm
fpm -s python -t rpm more-itertools==5.0.0
sudo yum install -y python-more-itertools-5.0.0-1.noarch.rpm
fpm -s python -t rpm pytest==3.5.1
sudo yum install -y python-pytest-3.5.1-1.noarch.rpm

echo "Build urllib rpm"
spectool -g -R spec/urllib3-1.24.2.spec
sudo yum-builddep -y spec/urllib3-1.24.2.spec
rpmbuild --bb spec/urllib3-1.24.2.spec
sudo yum install -y ~/rpmbuild/RPMS/noarch/python-urllib3-1.24.2-1.el7.noarch.rpm

Preostale odvisnosti pipov zberemo v rpm in jih namestimo. Datoteka 5other_dependencies.sh

naslov spojlerja

echo "Build rpm by fpm"
fpm -s python -t rpm jmespath==0.9.5
sudo yum install -y python-jmespath-0.9.5-1.noarch.rpm
fpm -s python -t rpm amqp==1.4.9
sudo yum install -y python-amqp-1.4.9-1.noarch.rpm
fpm -s python -t rpm anyjson==0.3.3
sudo yum install -y python-anyjson-0.3.3-1.noarch.rpm
fpm -s python -t rpm billiard==3.3.0.23
sudo yum install -y python-billiard-3.3.0.23-1.x86_64.rpm
fpm -s python -t rpm docutils==0.16
sudo yum install -y python-docutils-0.16-1.noarch.rpm
fpm -s python -t rpm Pillow==4.2.1
sudo yum install -y python-pillow-4.2.1-1.x86_64.rpm
fpm -s python -t rpm botocore==1.5.70
sudo yum install -y python-botocore-1.5.70-1.noarch.rpm
fpm -s python -t rpm boto3==1.4.5
sudo yum install -y python-boto3-1.4.5-1.noarch.rpm
fpm -s python -t rpm chardet==3.0.2
sudo yum install -y python-chardet-3.0.2-1.noarch.rpm
fpm -s python -t rpm croniter==0.3.31
sudo yum install -y python-croniter-0.3.31-1.noarch.rpm
fpm -s python -t rpm cssselect==1.1.0
sudo yum install -y python-cssselect-1.1.0-1.noarch.rpm
fpm -s python -t rpm cssutils==0.9.10
sudo yum install -y python-cssutils-0.9.10-1.noarch.rpm
fpm -s python -t rpm django-crispy-forms==1.4.0
sudo yum install -y python-django-crispy-forms-1.4.0-1.noarch.rpm
fpm -s python -t rpm django-jsonfield==0.9.13
sudo yum install -y python-django-jsonfield-0.9.13-1.noarch.rpm
fpm -s python -t rpm django-picklefield==0.3.2
sudo yum install -y python-django-picklefield-0.3.2-1.noarch.rpm
fpm -s python -t rpm django-sudo==2.1.0
sudo yum install -y python-django-sudo-2.1.0-1.noarch.rpm
fpm -s python -t rpm django-templatetag-sugar==1.0
sudo yum install -y python-django-templatetag-sugar-1.0-1.noarch.rpm
fpm -s python -t rpm djangorestframework==2.4.8
sudo yum install -y python-djangorestframework-2.4.8-1.noarch.rpm
fpm -s python -t rpm email-reply-parser==0.2.0
sudo yum install -y python-email_reply_parser-0.2.0-1.noarch.rpm
fpm -s python -t rpm enum34==1.1.9
sudo yum install -y python-enum34-1.1.9-1.noarch.rpm
fpm -s python -t rpm functools32==3.2.3.post2
sudo yum install -y python-functools32-3.2.3_2-1.noarch.rpm
fpm -s python -t rpm futures==3.3.0
sudo yum install -y python-futures-3.3.0-1.noarch.rpm
fpm -s python -t rpm hiredis==0.1.6
sudo yum install -y python-hiredis-0.1.6-1.x86_64.rpm
fpm -s python -t rpm honcho==1.0.1
sudo yum install -y python-honcho-1.0.1-1.noarch.rpm
fpm -s python -t rpm httplib2==0.17.0
sudo yum install -y python-httplib2-0.17.0-1.noarch.rpm
fpm -s python -t rpm jsonschema==2.6.0
sudo yum install -y python-jsonschema-2.6.0-1.noarch.rpm
fpm -s python -t rpm kombu==3.0.35
sudo yum install -y python-kombu-3.0.35-1.noarch.rpm
fpm -s python -t rpm celery==3.1.18
sudo yum install -y python-celery-3.1.18-1.noarch.rpm
fpm -s python -t rpm loremipsum==1.0.5
sudo yum install -y python-loremipsum-1.0.5-1.noarch.rpm
fpm -s python -t rpm lxml==4.5.0
sudo yum install -y python-lxml-4.5.0-1.x86_64.rpm
fpm -s python -t rpm milksnake==0.1.5
sudo yum install -y python-milksnake-0.1.5-1.noarch.rpm
fpm -s python -t rpm mistune==0.8.4
sudo yum install -y python-mistune-0.8.4-1.noarch.rpm
fpm -s python -t rpm mmh3==2.3.1
sudo yum install -y python-mmh3-2.3.1-1.x86_64.rpm
fpm -s python -t rpm exam==0.10.6
sudo yum install -y python-exam-0.10.6-1.noarch.rpm
fpm -s python -t rpm msgpack==0.6.2
sudo yum install -y python-msgpack-0.6.2-1.x86_64.rpm
fpm -s python -t rpm oauth2==1.9.0.post1
sudo yum install -y python-oauth2-1.9.0.post1-1.noarch.rpm
fpm -s python -t rpm oauthlib==3.1.0
sudo yum install -y python-oauthlib-3.1.0-1.noarch.rpm
fpm -s python -t rpm parsimonious==0.8.0
sudo yum install -y python-parsimonious-0.8.0-1.noarch.rpm
fpm -s python -t rpm requests==2.20.1
sudo yum install -y python-requests-2.20.1-1.noarch.rpm
fpm -s python -t rpm petname==2.0
sudo yum install -y python-petname-2.0-1.noarch.rpm
fpm -s python -t rpm python-utils==2.3.0
sudo yum install -y python-utils-2.3.0-1.noarch.rpm
fpm -s python -t rpm progressbar2==3.10.1
sudo yum install -y python-progressbar2-3.10.1-1.noarch.rpm
fpm -s python -t rpm pytest-django==2.9.1
sudo yum install -y python-pytest-django-2.9.1-1.noarch.rpm
fpm -s python -t rpm pytest-html==1.9.0
sudo yum install -y python-pytest-html-1.9.0-1.noarch.rpm
fpm -s python -t rpm python-memcached==1.59
sudo yum install -y python-memcached-1.59-1.noarch.rpm
fpm -s python -t rpm python-openid==2.2.5
sudo yum install -y python-openid-2.2.5-1.noarch.rpm
fpm -s python -t rpm python-u2flib-server==4.0.1
sudo yum install -y python-u2flib-server-4.0.1-1.noarch.rpm
fpm -s python -t rpm qrcode==5.3
sudo yum install -y python-qrcode-5.3-1.noarch.rpm
fpm -s python -t rpm querystring-parser==1.2.4
sudo yum install -y python-querystring_parser-1.2.4-1.noarch.rpm
fpm -s python -t rpm redis==2.10.5
sudo yum install -y python-redis-2.10.5-1.noarch.rpm
fpm -s python -t rpm rb==1.7
sudo yum install -y python-rb-1.7-1.noarch.rpm
fpm -s python -t rpm redis-py-cluster==1.3.4
sudo yum install -y python-redis-py-cluster-1.3.4-1.noarch.rpm
fpm -s python -t rpm requests-oauthlib==0.3.3
sudo yum install -y python-requests-oauthlib-0.3.3-1.noarch.rpm
fpm -s python -t rpm percy==2.0.2
sudo yum install -y python-percy-2.0.2-1.noarch.rpm
fpm -s python -t rpm selenium==3.141.0
sudo yum install -y python-selenium-3.141.0-1.noarch.rpm
fpm -s python -t rpm semaphore==0.4.65
sudo yum install -y python-semaphore-0.4.65-1.x86_64.rpm
fpm -s python -t rpm sentry-sdk==0.14.1
sudo yum install -y python-sentry-sdk-0.14.1-1.noarch.rpm
fpm -s python -t rpm setproctitle==1.1.10
sudo yum install -y python-setproctitle-1.1.10-1.x86_64.rpm
fpm -s python -t rpm simplejson==3.8.2
sudo yum install -y python-simplejson-3.8.2-1.x86_64.rpm
fpm -s python -t rpm sqlparse==0.1.19
sudo yum install -y python-sqlparse-0.1.19-1.noarch.rpm
fpm -s python -t rpm statsd==3.1
sudo yum install -y python-statsd-3.1-1.noarch.rpm
fpm -s python -t rpm strict-rfc3339==0.7
sudo yum install -y python-strict-rfc3339-0.7-1.noarch.rpm
fpm -s python -t rpm structlog==16.1.0
sudo yum install -y python-structlog-16.1.0-1.noarch.rpm
fpm -s python -t rpm symbolic==6.1.4
sudo yum install -y python-symbolic-6.1.4-1.x86_64.rpm
fpm -s python -t rpm toronado==0.0.11
sudo yum install -y python-toronado-0.0.11-1.noarch.rpm
fpm -s python -t rpm ua-parser==0.7.3
sudo yum install -y python-ua-parser-0.7.3-1.noarch.rpm
fpm -s python -t rpm uwsgi==2.0.18
sudo yum install -y python-uwsgi-2.0.18-1.noarch.rpm
fpm -s python -t rpm -n PyYAML pyyaml==3.11
sudo yum install -y PyYAML-3.11-1.x86_64.rpm
fpm -s python -t rpm django-auth-ldap==1.2.17
sudo yum install -y python-django-auth-ldap-1.2.17-1.noarch.rpm

Prevedemo v rpm sentry in ga namestimo. Datoteka 6sentry.sh

echo "Install nodejs and yarn"
curl -sL https://rpm.nodesource.com/setup_10.x | sudo bash -
sudo yum install -y nodejs
sudo sed -e '/nodesource-source/,+6d' -i /etc/yum.repos.d/nodesource-el7.repo
curl -sL https://dl.yarnpkg.com/rpm/yarn.repo | sudo tee /etc/yum.repos.d/yarn.repo
sudo yum install -y yarn

cp spec/config.yml spec/sentry.conf.py ~/rpmbuild/SOURCES
cp spec/sentry-cron.service spec/sentry-web.service spec/sentry-worker.service ~/rpmbuild/SOURCES
spectool -g spec/sentry-9.1.2.spec
sudo yum-builddep -y spec/sentry-9.1.2.spec
rpmbuild -bb spec/sentry-9.1.2.spec
sudo yum install -y ~/rpmbuild/RPMS/noarch/python-sentry-9.1.2-1.el7.noarch.rpm

Namestitev sentry rpm z odvisnostmi na drugem strežniku

Izklopite Selinux

sudo sed -i s/^SELINUX=.*$/SELINUX=disabled/ /etc/selinux/config
#### sudo reboot

Povezovanje repozitorija epel-release

sudo yum install -y epel-release git libjpeg-turbo redis
sudo systemctl start redis

Namestite in zaženite PostgreSQL 9.6. Datoteka 7postgresql.sh

sudo yum install -y https://download.postgresql.org/pub/repos/yum/reporpms/EL-7-x86_64/pgdg-redhat-repo-latest.noarch.rpm
sudo yum install -y postgresql96 postgresql96-server postgresql96-contrib
sudo /usr/pgsql-9.6/bin/postgresql96-setup initdb
sudo systemctl start postgresql-9.6
sudo -i -u postgres psql -c "create user sentry with password 'password';"
sudo -i -u postgres psql -c "create database sentry with owner sentry;"
sudo -i -u postgres psql -c "alter role sentry superuser;"

# TODO: Проверить без прав superuser для роли sentry
#sudo -i -u postgres psql -c "alter role sentry nosuperuser;"
#sudo -i -u postgres psql -c "CREATE SCHEMA main AUTHORIZATION sentry;"

Zaženemo migracijo (ustvarjanje sheme baze podatkov) in zaženemo storitve. Datoteka 8start_sentry.sh

sudo systemctl start redis
sudo -i -u sentry /usr/bin/sentry --config /etc/sentry/ upgrade
sudo systemctl start sentry-worker
sudo systemctl start sentry-cron
sudo systemctl start sentry-web

Ustvarjanje notranjega skrbnika Sentry

https://forum.sentry.io/t/noninteractive-first-time-setup-of-user-via-upgrade/164

sudo -i -u sentry /usr/bin/sentry --config /etc/sentry/ createuser

Gradnja straže v rpm, namestitev, konfiguracija za lene

Izklopite Selinux

sudo sed -i s/^SELINUX=.*$/SELINUX=disabled/ /etc/selinux/config
sudo reboot

Zaženite skripte za izdelavo in namestitev straže

sudo yum install -y epel-release git
git clone https://github.com/patsevanton/sentry-rpm.git
cd sentry-rpm
./1general_dependencies.sh
./2psycopg2-binary.sh
./3dateutil.sh
./4urllib3.sh
./5other_dependencies.sh
./6sentry.sh
Копируем rpm из rpmbuild/RPMS и корня sentry-rpm на целевой сервер. Создаем yum репо. Устанавливаем все собранные rpm пакеты.
./7postgresql.sh
./8start_sentry.sh

Ustvarjanje notranjega skrbnika Sentry

https://forum.sentry.io/t/noninteractive-first-time-setup-of-user-via-upgrade/164

sudo -i -u sentry /usr/bin/sentry --config /etc/sentry/ createuser

Preskušanje pošiljanja izjeme

Preizkusili ga bomo na java projektu. Prenesite javo in maven.

sudo yum install -y java-1.8.0-openjdk-devel git
sudo wget http://repos.fedorapeople.org/repos/dchen/apache-maven/epel-apache-maven.repo -O /etc/yum.repos.d/epel-apache-maven.repo
sudo yum -y install apache-maven
git clone https://github.com/getsentry/examples.git
cd examples/java/basic
mvn compile exec:java

Zdaj moramo zagnati Javo tako, da ji posredujemo SENTRY_DSN

SENTRY_DSN=https://public:private@host:port/1 mvn exec:java

Zdaj moramo najti privzeto ustvarjeni SENTRY_DSN.

Pojdimo na Sentry. Pojdimo na privzeti projekt internal.

ali

Pojdimo na nastavitve projekta.

Pojdite na Ključi odjemalca (DSN).

Kopirajte DSN. To je SENTRY_DSN.

S tem parametrom zaženemo Javo.

SENTRY_DSN=http://[email protected]:9000/1 mvn exec:java

Vidimo to sliko.

Če gremo na UnsupportedOperationException, potem bomo videli razširjene informacije.

Ustvaril klepet v Telegramu s programom Sentry

https://t.me/sentry_ru

V naslednjih epizodah:

Preizkusite LDAP. Scenarij je že pripravljen 9sentry-ldap-auth.sh
Preizkusite različico sentry 10.0.X po uvedbi nekaj manjših izdaj.

Repozitorij s skripti:

https://github.com/patsevanton/sentry-rpm

Vir: www.habr.com