🥇Cryptographic goobta shaqada ee ku salaysan halbeegyada furaha dadweynaha ee aaladda Android

Waa waqtigii la muujin lahaa sida goobta shaqada cryptographic ee ku saleysan heerarka muhiimka ah ee dadweynaha cryptoarmpkcs wuxuu ku shaqeeyaa mid ka mid ah aaladaha mobilada, kaas oo ah Android.

Fikradda la dejiyay markii la horumarinayay utility cryptoarmpkcs waa in isticmaaluhu uu la kulmo ugu yaraan dhib la'aan marka la abuurayo oo la xaqiijinayo saxiixa elektarooniga ah. Taasi waa sababta aan u soo jeedineyno isticmaalka calaamadaha cryptographic side fure u ah shahaadada shakhsi ahaaneed PKCS#11 iyo/ama weel ammaan ah PKCS#12. Waa in la sheegaa in isticmaalka PKCS # 12 xaalado badan ay soo baxdo in ay noqoto ku dhawaad kaliya ee suurtogalka ah, tusaale ahaan, marka isla PKCS # 11 calaamaduhu aysan taageero u helin meelo gaar ah. Markaa waxaan go'aansanay inaan bilowno u-dejinta utility cryptoarmpkcs masraxa Android anagoo kaashanayna PKCS#12 weelasha sugan.

Aynu isla markiiba ogaano in tan iyo markii mashruuca lagu sameeyay madal C iyo Tcl/Tk, soo-dejintu ma aysan keenin wax caqabado aasaasi ah. Tan waxaa suurta galiyay tignoolajiyada Androwish. Iyada oo furfuran iyo dejinta deegaanka Ma jirin wax dhibaato ah (deegaanka shaqada waa Linux - Mageia-7.0). Waxaan bixin doonaa hal qoraal oo kaliya oo lagu geynayo Aaladaha Khadka Taliska Android (sdk-tools-linux-xxxx.zip):

#!/bin/sh
if [ $# -ne 1   ]
    then 
	echo "./InstallAndroidSDK.sh <sdk-tools-linux-xxxxxxxx.zip>"
	echo "Не указан архив или число параметров больше 1"
	exit 1
fi
if [ ! -f $1 ]
    then 
	echo "./InstallAndroidSDK.sh <sdk-tools-linux-xxxxxxxx.zip>"
	echo "архив $1 отсутствует"
	exit 1
fi
#Распаковываем SDK-TOOLS в папку tools
#unzip sdk-tools-linux-4333796.zip
unzip $1
#Создаем папку android-sdk-linux
mkdir android-sdk-linux
#Перемещвем папку tools в android-sdk-linux
mv tools android-sdk-linux
cd android-sdk-linux/tools/bin
./sdkmanager "platform-tools" "platforms;android-29"

Waxa ugu cajiibsan ayaa ah in deegaanka Androwish ay ka kooban yihiin laba tarjumaan oo kala ah, Undrowish-xxx iyo vaniljwish-xxx, kuwaas oo gabi ahaanba la mid ah “balalaikas” (baakadaha) ee Androwish laftiisa ku jira. Farqiga u dhexeeya ka-noqoshada iyo vaniljiyuhu waa in vaniljiyuhu leeyahay dhabarka dambe ee SDL/AGG/nooca xorta ah:

Joogitaanka labadan utility waxay kuu ogolaaneysaa inaad horumariso arji adiga oo aan isticmaalin Android lafteeda iyo emulatorkeeda oo leh qiyaasta ugu badan ee aaladda dhabta ah. Marka hore, tani waa, dabcan, unroidwish-xxx.

Xirmada gaarka ah ee Android-ka ee dhabta ah waxaa lagu dhisay deegaanka AWSDK. Geedka mashruucaaga waa in loo raro ~/AWSDK/ hantida/ galka abka. Xaaladdan oo kale, qaybta ugu weyn ee mashruucaaga waa in loo beddelaa main.tcl. Haddii aad isticmaasho balalaikas dheeraad ah oo leh maktabado firfircoon, markaa maktabadaha waa in lagu dhejiyaa galka ~/AWSDK/libs/x86 ee emulator-ka iyo ~/AWSDK/libs/armeabi ee qalabka dhabta ah.

Tan ka dib, kaliya socodsii amarka:

$wish ~/AWSDK/tools/bones

raacna tilmaamaha:

Xirmada apk ee la soo ururiyey waxay ku jiri doontaa ~/AWSDK/build/outputs/apk folder.

Haddii aad leedahay qalab dhab ah ama emulator ku xiran, xirmada waa la rakibi karaa isla markiiba.
Xaaladdan oo kale, qalabka dhabta ah waa inuu ku jiraa qaabka debug.

Laakin aan ku soo laabano codsiga laftiisa. Maxay ahayd in lagu beddelo dhexdeeda?

Dabiici ahaan, isbeddellada ayaa ugu horreyntii la xiriira cabbirka shaashadda. Waa inaan dib u habayn ku sameeyaa daaqadda ugu weyn (bilowga). Natiijo ahaan, halkii hal daaqad laga heli lahaa kumbuyuutarka caadiga ah:

Saddex daaqadood ayaa ka soo muuqday Android:

Daaqadda kowaad waa xog. Caadi ahaan, waxa loo qaybiyaa dhawr qaybood. Qaybta hore, oo ku taal xagga sare, waxay ka kooban tahay magaca tamarta iyo calaamadeeda.

Waxa ku xiga summada soo-saaraha, xaashida macluumaadka iyo saddexda badhamada oo dhammaystira bogga.
Bogga waxaa lagu qoray iyadoo la isticmaalayo qaybta shiraac. Boggu waxa uu isticmaalaa laba nooc oo badhanno ah: mid qaab leydi translucent ah (dhexe), iyo labada kale oo ah qaab leydi leh geeso wareegsan. Balalaika ayaa loo isticmaalay in lagu abuuro badhammo leh geeso wareegsan tkpath. Shakhsi ahaan, balalaikani waxay igu samaysay raad aad u wanaagsan. Dabiici ahaan, marka lagu shaqaynayo shiraac, joomatari ayaa qaata qaybta libaax ee xeerka. Hoos waxaa ah qoraalka create_titul_page.tcl si loo abuuro bogga koowaad ee codsiga. Qof kastaa wuu wax ka beddeli karaa si uu u waafajiyo aragtidiisa.

Script create_titul_page.tcl

package require Tk
package require tkpath 0.3.0
global mydir
set mydir [file dirname [info script]]
#Грузим картинки
#Логотип продукта
image create photo logo_product -file [file join $mydir "imageme" "validcertkey_51x24.png"] 
#Логотип производителя
image create photo logo_orel -file [file join $mydir "imageme" "я_орел_425x200.png"] -format "png -alpha 1.0"
#Андроида с tcl/tk
image create photo logo_and -file [file join $mydir "imageme" "AndTk_inv_147x173.png"] -format "png -alpha 1.0"
#Свиток опечатанный
image create photo svitok -file [file join $mydir "imageme" "blue_svitok.png"] -format "png -alpha 1.0"
#Плитка
image create photo tileand -file [file join $mydir "imageme" "tile_green_and_32x32.png"] -format "png -alpha 1.0"
#Увеличить/уменьшить (отрицательное значение - уменьшение)
proc scaleImage {im xfactor {yfactor 0}} {
set mode -subsample
if {$xfactor>=0 && $yfactor>=0} {
set mode -zoom
} else {
set xfactor [expr $xfactor * -1]
}
if {$yfactor == 0} {set yfactor $xfactor}
set t [image create photo]
$t copy $im
$im blank
$im copy $t -shrink $mode $xfactor $yfactor
image delete $t
}
proc createtile {w  backg} {
image create photo tiled
tiled copy $backg -to 0 0 $::scrwidth $::scrheight -shrink
$backg copy tiled
image delete tiled
# Мостим холст
$w create image 0 0  
-image $backg  
-anchor nw
}
proc create_rectangle  {canv img x1 y1 x2 y2 color alfa {wbd 0} {colorline black} } {
image create photo $img -format "default -colorformat  rgb"
set rgb1 [winfo rgb $canv $color]
set cr  [lindex $rgb1 0]
set cg  [lindex $rgb1 1]
set cb  [lindex $rgb1 2]
set fill [format "#%04x%04x%04x" $cr $cg $cb ]
#Создаем цветной праямоугольник
$img put $fill -to 0 0 [expr {$x2 - $x1}] [expr {$y2 -$y1}]
#Сохраняем картинку
set dimg [$img data -format png]
#Создаем image с учетом alpha канала
image create photo $img -data $dimg -format "png -alpha $alfa"
#    $img put [list $rgb1] -to 0 0 [expr {$x2 - $x1}] [expr {$y2 -$y1}]
#Отображаем цветной прямоугольник
set imgr [$canv create image $x1 $y1 -image $img -anchor nw] 
set cc [subst {butImg $img}]
$canv bind $imgr <ButtonPress-1> $cc
#Оконтовка вокруг цветного прямоугольника
if {$wbd > 0 } {
set item [$canv create rect $x1 $y1 $x2 $y2 -outline $colorline -width $wbd ]
$canv bind $item <ButtonPress-1> $cc
}
return $imgr
}
proc butImg {img} {
tk_messageBox -title "Кнопка" -icon info -message "Нажали кнопку=$img" -detail "::screenwidth=$::scrwidthn::screenheight=$::scrheight" -parent .
if {$img == "exit"} {
set answer [tk_dialog .dialog2 "Конец работы" "Вы действительноnхотите выйти?" question 0 "Да" "Нет" ]
if {$answer == 0} {
exit
}	
}
}
proc page_titul {fr  logo_manufacturer} {
global mydir
#Создаем холст на весь экран
tkp::canvas $fr.can -borderwidth 0 -height [winfo screenheight .] -width [winfo screenwidth .] -relief flat
#Мостим холст плиткой 
createtile "$fr.can"  "tileand"
pack $fr.can  -anchor center -expand 1 -fill both -side top  -padx 0 -pady 0
#Вычисляем координаты для логотипа производителя
#update чтобы обновилась информация в БД об окнах
update
#    set aa [winfo height $fr.labtitul]
set aa $::padly
#Центрируем логотип разработчика
set ha [image width $logo_manufacturer]
set xman [expr {($::scrwidth - $ha) / 2 }]
$fr.can create image $xman $aa -image $logo_manufacturer -anchor nw -tag tag_logo
set blogo [$fr.can bbox tag_logo]
set wexit [lindex $blogo 3]
if {$::typetlf } {
set dlx [expr {$::padlx / 1}]
$fr.can create text [expr $dlx + 6] [expr {$wexit + $::padly + 6}] -anchor nw -text "Электронная подпись" -fill black -font {{Roboto Condensed Medium} 15 }
$fr.can create text $dlx [expr {$wexit + $::padly}] -anchor nw -text "Электронная подпись" -fill white -font {{Roboto Condensed Medium} 15 } -tag id_text0
update
set blogo [$fr.can bbox id_text0]
set wexit [lindex $blogo 3]
$fr.can create text [expr $dlx + 4] [expr {$wexit + $::padly + 4 - 80}] -anchor nw -text "для платформы Android" -fill black -font {{Roboto Condensed Medium} 13}
$fr.can create text $dlx [expr {$wexit + $::padly - 80}] -anchor nw -text "для платформы Android" -fill white -font {{Roboto Condensed Medium} 13} -tag id_text1
set blogo [$fr.can bbox id_text1]
set wexit [lindex $blogo 3]
$fr.can create text [expr $dlx + 3] [expr {$wexit + $::padly + 3 - 50}] -anchor nw -text "№ 63 ФЗ "Об электроннойnподписи от 6 апреля 2011 года"" -fill black -font {{Roboto} 10}
$fr.can create text $dlx [expr {$wexit + $::padly - 50}] -anchor nw -text "№ 63 ФЗ "Об электроннойnподписи от 6 апреля 2011 года"" -fill white -font {{Roboto} 10} -tag id_text2
set blogo [$fr.can bbox id_text2]
set wexit [lindex $blogo 3]
$fr.can create text [expr $dlx + 2] [expr {$wexit + $::padly + 2 - 40}] -text "Авторы: В.Н. Орловnhttp://soft.lissi.ru, http://www.lissi.run+7(495)589-99-53ne-mail: [email protected]" 
-anchor nw -fill black  -font {{Roboto} 9}
$fr.can create text $dlx [expr {$wexit + $::padly - 40}] -text "Авторы: В.Н. Орловnhttp://soft.lissi.ru, http://www.lissi.run+7(495)589-99-53ne-mail: [email protected]" 
-anchor nw -fill white -tag id_text3  -font {{Roboto} 9}
} else {
$fr.can create text [expr $::padlx + 2] [expr {$wexit + $::padly + 2}] -anchor nw -text "Электронная подпись" -fill black -font {{Nimbus Sans Narrow} 20}
$fr.can create text $::padlx [expr {$wexit + $::padly}] -anchor nw -text "Электронная подпись" -fill white -font {{Nimbus Sans Narrow} 20} -tag id_text0
set blogo [$fr.can bbox id_text0]
set wexit [lindex $blogo 3]
$fr.can create text [expr $::padlx + 2] [expr {$wexit + $::padly + 2 - 20}] -anchor nw -text "для платформы Android" -fill black -font {{Nimbus Sans Narrow} 18}
$fr.can create text $::padlx [expr {$wexit + $::padly - 20}] -anchor nw -text "для платформы Android" -fill white -font {{Nimbus Sans Narrow} 18} -tag id_text1
set blogo [$fr.can bbox id_text1]
set wexit [lindex $blogo 3]
$fr.can create text [expr $::padlx + 2] [expr {$wexit + $::padly + 2}] -anchor nw -text "№ 63 ФЗ "Об электроннойnподписи от 6 апреля 2011 года"" -fill black -font {{Nimbus Sans Narrow} 14}
$fr.can create text $::padlx [expr {$wexit + $::padly}] -anchor nw -text "№ 63 ФЗ "Об электроннойnподписи от 6 апреля 2011 года"" -fill white -font {{Nimbus Sans Narrow} 14} -tag id_text2
set blogo [$fr.can bbox id_text2]
set wexit [lindex $blogo 3]
$fr.can create text [expr $::padlx + 1] [expr {$wexit + $::padly + 1}] -text "Авторы: В.Н. Орловnhttp://soft.lissi.ru, http://www.lissi.run+7(495)589-99-53ne-mail: [email protected]" 
-anchor nw -fill black  -font {{Nimbus Sans Narrow} 12}
$fr.can create text $::padlx [expr {$wexit + $::padly}] -text "Авторы: В.Н. Орловnhttp://soft.lissi.ru, http://www.lissi.run+7(495)589-99-53ne-mail: [email protected]" 
-anchor nw -fill white -tag id_text3  -font {{Nimbus Sans Narrow} 12} -tag id_text3
set blogo [$fr.can bbox id_text2]
}
set blogo [$fr.can bbox id_text3]
set wland [lindex $blogo 3]
$fr.can create image $::padlx $wland -image logo_and -anchor nw -tag tag_land
set ha [image height logo_and]
set wa [image width logo_and]
set ha1 [expr {$ha - ($ha / 2 ) }]
$fr.can create image [expr {$wa - 80 }] [expr {$wland + $ha1}] -image svitok -anchor nw -tag tag_land
if {$::typetlf} {
set x1 [expr {$::padlx / 2}]
set y1 [expr {$wland + 120}]
set x2 [expr {$::::scrwidth - $x1}]
set y2 [expr {$y1 + 120}]
set wd 8
set rr 18
} else {
set x1 [expr {$::padlx / 2}]
set y1 [expr {$wland + 40}]
set x2 [expr {$::::scrwidth - $x1}]
set y2 [expr {$y1 + 40}]
set wd 4
set rr 6
}
set g5 [$fr.can gradient create linear -stops {{0 lightgreen} {1 green}}] 
set S3 [$fr.can style create -stroke "skyblue" -fill  $g5 -strokewidth $wd  -fillopacity 0.6]
set im1 [$fr.can create prect $x1 $y1 $x2 $y2 -rx $rr -style $S3]
$fr.can bind $im1 <ButtonPress-1> {butImg "img1"}
#Печатаем техт
set blogo [$fr.can bbox $im1]
set by2 [lindex $blogo 3]
set by1 [lindex $blogo 1]
set bb [expr {($by2 - $by1) / 2}]
set bx2 [lindex $blogo 2]
set bx1 [lindex $blogo 0]
set bbx [expr {($bx2 - $bx1) / 2}]
set txt1 [$fr.can create text [expr {$x1 + $::padlx * 2}] [expr {$y1 + 1 }] -anchor nw -text "Сайт разработчика" -fill black -font {{Arial} 10 normal}] 
#Центрируем техт
set btxt1 [$fr.can bbox $txt1]
#Смещение по оси Y
set ty2 [lindex $btxt1 3]
set ty1 [lindex $btxt1 1]
set tt [expr {$ty2 - $ty1}]
set tt [expr {$tt / 2}]
set offsy [expr {($by1 + $bb) - ($ty1 + $tt)}]
#Смещение по оси X
set tx2 [lindex $btxt1 2]
set tx1 [lindex $btxt1 0]
set ttx [expr {$tx2 - $tx1}]
set ttx [expr {$ttx / 2}]
set offsx [expr {($bx1 + $bbx) - ($tx1 + $ttx)}]
$fr.can move $txt1 $offsx $offsy
$fr.can bind $txt1 <ButtonPress-1> {butImg "img1"}
if {$::typetlf} {
set y1 [expr $y2 + 40]
set x2 [expr {$::::scrwidth - $x1}]
set y2 [expr {$y1 + 120}]
} else {
set y1 [expr {$y1 + 60}]
set x2 [expr {$::::scrwidth - $x1}]
set y2 [expr {$y1 + 40}]
}
set im1 [create_rectangle $fr.can "but2" $x1 $y1 $x2 $y2 "#2b972d" 0.6 $wd "skyblue"]
#Печатаем техт
set blogo [$fr.can bbox $im1]
set by2 [lindex $blogo 3]
set by1 [lindex $blogo 1]
set bb [expr {($by2 - $by1) / 2}]
set bx2 [lindex $blogo 2]
set bx1 [lindex $blogo 0]
set bbx [expr {($bx2 - $bx1) / 2}]
set txt1 [$fr.can create text [expr {$x1 + $::padlx * 2}] [expr {$y1 + 1 }] -anchor nw -text "Переход в основное меню" -fill black -font {{Roboto Condensed Medium} 12}] 
#Центрируем текст
set btxt1 [$fr.can bbox $txt1]
#Смещение по оси Y
set ty2 [lindex $btxt1 3]
set ty1 [lindex $btxt1 1]
set tt [expr {$ty2 - $ty1}]
set tt [expr {$tt / 2}]
set offsy [expr {($by1 + $bb) - ($ty1 + $tt)}]
#Смещение по оси X
set tx2 [lindex $btxt1 2]
set tx1 [lindex $btxt1 0]
set ttx [expr {$tx2 - $tx1}]
set ttx [expr {$ttx / 2}]
set offsx [expr {($bx1 + $bbx) - ($tx1 + $ttx)}]
$fr.can move $txt1 $offsx $offsy
$fr.can bind $txt1 <ButtonPress-1> {butImg "but2"}
if {$::typetlf} {
set x1 [expr {$::padlx / 2}]
set y1 [expr $y2 + 40]
set x2 [expr {$::::scrwidth - $x1}]
set y2 [expr {$y1 + 120}]
} else {
set x1 [expr {$::padlx / 2}]
set y1 [expr {$y1 + 60}]
set x2 [expr {$::::scrwidth - $x1}]
set y2 [expr {$y1 + 40}]
}
set S3 [$fr.can style create -stroke skyblue -fill  $g5 -strokewidth $wd  -fillopacity 0.6]
set im1 [$fr.can create prect $x1 $y1 $x2 $y2 -rx $rr -style $S3]
set blogo [$fr.can bbox $im1]
$fr.can bind $im1 <ButtonPress-1> {butImg "exit"}
set by2 [lindex $blogo 3]
set by1 [lindex $blogo 1]
set bb [expr {($by2 - $by1) / 2}]
set bx2 [lindex $blogo 2]
set bx1 [lindex $blogo 0]
set bbx [expr {($bx2 - $bx1) / 2}]
set txt1 [$fr.can create text [expr {$x1 + $::padlx * 2}] [expr {$y1 + 1 }] -anchor nw -text "Конец работы" -fill black  -font {Arial 10 normal}]
$fr.can bind $txt1 <ButtonPress-1> {butImg "exit"}
set btxt1 [$fr.can bbox $txt1]
#Смещение по оси Y
set ty2 [lindex $btxt1 3]
set ty1 [lindex $btxt1 1]
set tt [expr {$ty2 - $ty1}]
set tt [expr {$tt / 2}]
set offsy [expr {($by1 + $bb) - ($ty1 + $tt)}]
#Смещение по оси X
set tx2 [lindex $btxt1 2]
set tx1 [lindex $btxt1 0]
set ttx [expr {$tx2 - $tx1}]
set ttx [expr {$ttx / 2}]
set offsx [expr {($bx1 + $bbx) - ($tx1 + $ttx)}]
$fr.can move $txt1 $offsx $offsy
}
#Собственно скрипт
#Считываем размеры экрана
set ::scrwidth [winfo screenwidth .]
set ::scrheight [winfo screenheight .]
set ::typetlf 0
#Проверяем, что это телефон
if {$::scrwidth < $::scrheight} {
set ::typetlf 1
}
set ::padls 20
set ::padlx 15
set ::padly 15
if {$::typetlf} {
wm attributes . -fullscreen 1
scaleImage icon_openfile_18x16 3
scaleImage ::img::view_18x16 3
#Логотип производителя
scaleImage logo_orel 2
#Логотип продуктв
scaleImage logo_product 2
#Андроида tcl/tk
scaleImage logo_and 3
#Свиток опечатанный
scaleImage svitok 4
set ::padls 50
set ::padlx 75
set ::padly 50
} else {
#Конфигурирование виджета под смартфон
scaleImage logo_orel -2
set ::scrwidth 370
set ::scrheight 700
wm minsize . $::scrwidth $::scrheight
set geometr $::scrwidth
append geometr "x"
append geometr $::scrheight
append geometr "+0+0"
wm geometry . $geometr
}
#Создаем название продукта
set name_product "CryptoArmPKCS-A" 
label .labtitul -image logo_product -compound left -fg snow -text $name_product -font {Arial 10 bold} -anchor w  -width [winfo screenwidth .] -pady $::padls -padx 10 -bg #222222 
pack .labtitul -anchor nw -expand 0 -fill x -side top  -padx 1 -pady 0
#Создаем стартовую страницу
set i 0
ttk::frame .fr$i -pad 0 -padding 0
page_titul ".fr$i"  "logo_orel"
pack .fr$i -side top -anchor center -expand 1 -fill both -side top  -padx 0 -pady 0 
update

Si aad ufuliso qoraalkan, isticmaal mid ka mid ah utility-ka aan la bedelin ama vaniljwish:

$ /usr/local/bin64/undroidwish-e5dc71ed9d-linux64   create_titul_page.tcl

ama

$/usr/local/bin64/vanillawish-e5dc71ed9d-linux64  create_titul_page.tcl

Natiijadu waxay ku tusaysaa sawirka hore.

Bogga labaad ayaa taxaya shaqada ay taageerto utility cryptoarmpkcs-A. Sadar kastaa waa badhan, marka la gujiyo, bog shaqaynaysa ayaa la soo bandhigi doonaa. Joomatari meelaynta badhanka boggan waxa go'aamiya farta la isticmaalay. Hoos waxaa ku yaal curinta_page_functions.tcl si loo abuuro bogga labaad ee arjiga. Qof kasta ayaa sidoo kale wax ka beddeli kara si uu ugu habboonaado shaqadooda.

Script create_page_functions.tcl

package require Tk
package require tkpath 0.3.0
global mydir
set mydir [file dirname [info script]]
#Увеличить/уменьшить (отрицательное значение - уменьшение)
proc scaleImage {im xfactor {yfactor 0}} {
set mode -subsample
if {$xfactor>=0 && $yfactor>=0} {
set mode -zoom
} else {
set xfactor [expr $xfactor * -1]
}
if {$yfactor == 0} {set yfactor $xfactor}
set t [image create photo]
$t copy $im
$im blank
$im copy $t -shrink $mode $xfactor $yfactor
image delete $t
}
proc createtile {w  backg} {
image create photo tiled
tiled copy $backg -to 0 0 $::scrwidth $::scrheight -shrink
$backg copy tiled
image delete tiled
# Мостим холст
$w create image 0 0  
-image $backg  
-anchor nw
}
proc butCliked {num fr} {
pack forget  .fr1
set ::tekFrfunc $fr
pack $fr -side top -anchor center -expand 1 -fill both -side top  -padx 0 -pady 0 
tk_dialog .dialog1 "Dear user:" "Button $num was clickednFr=$fr" info 0 OK 
}
proc butImg {img} {
tk_messageBox -title "Кнопка" -icon info -message "Нажали кнопку=$img" -detail "::screenwidth=$::scrwidthn::screenheight=$::scrheight" -parent .
if {$img == "exit"} {
set answer [tk_dialog .dialog2 "Конец работы" "Вы действительноnхотите выйти?" question 0 "Да" "Нет" ]
if {$answer == 0} {
exit
}	
}
}
proc butReturn {} {
pack forget  $::tekFrfunc
pack .fr1 -side top -anchor center -expand 1 -fill both -side top  -padx 0 -pady 0 
#    tk_dialog .dialog1 "Dear user:" "Button $num was clickednFr=$fr" info 0 OK 
}
proc page_func {fr tile titul functions} {
#Кнопки  меню
upvar $functions but
#Создаем шрифт для кнопок
if {$::typetlf} {
set feFONT_button "-family {Roboto} -size 9 -weight bold -slant roman"
set widl 10
} else {
set feFONT_button "-family {Arial} -size 12 -weight bold -slant roman"
set widl 5
}
catch {font delete fontTEMP_drawer}
eval font create fontTEMP_drawer  $feFONT_button
#Вычисляем максимальныю длину текста
set drawerCNT 0
set strMaxWidthPx 15
set Ndrawers [expr {[array size but] - 1}]
while { $drawerCNT <= $Ndrawers } {
set strWidthPx [font measure fontTEMP_drawer "$but($drawerCNT)"]
if { $strWidthPx > $strMaxWidthPx } {
set strMaxWidthPx $strWidthPx
}
incr drawerCNT
}
set drawerWidthPx [expr $strMaxWidthPx + 10]
set xxx [expr {($::::scrwidth - $drawerWidthPx) / 2}]
if {$fr != ".fr1"} {
set hret [expr $::scrheight / 4]
} else {
set hret $::scrheight
}
set hret [expr $::scrheight / 4]
tkp::canvas $fr.can -borderwidth 0 -height $hret -width $::scrwidth -relief flat
#Мостим холст плиткой 
createtile "$fr.can"  $tile
pack $fr.can  -anchor center -expand 1 -fill both -side top  -padx 0 -pady 0
if {$titul != "" } {
set allfunc $titul
catch {font delete fontTEMP_titul}
set font_titul "-family {Roboto Condensed Medium} -size 15"
eval font create fontTEMP_titul  $font_titul
set funcWidthPx [font measure fontTEMP_titul "$allfunc"]
set dlx [expr {($::::scrwidth - $funcWidthPx) / 2}]
$fr.can create text [expr $dlx + 6] [expr {6 + 6}] -anchor nw -text "$allfunc" -fill black -font fontTEMP_titul
$fr.can create text $dlx 6 -anchor nw -text "$allfunc" -fill white -font fontTEMP_titul -tag id_text0
set blogo [$fr.can bbox id_text0]
set boxbut [expr ([lindex $blogo 3] + 6 + 6)]
} else {
set boxbut [expr 6 + 6]
}
#Вычисляем самый широкий текст у кнопок
#См. выше
#Размещаем кнопки
set BDwidth_canvas 0
set maxTextHeightPx [font metrics fontTEMP_drawer -linespace] 
set maxTextHeightPx [expr {$maxTextHeightPx + ( $maxTextHeightPx / 2)}]
set drawerHeightPx $maxTextHeightPx
set xLocTextPx [expr {($::::scrwidth - $drawerWidthPx) / 2}]
set yLocTextPx [expr $BDwidth_canvas + ($drawerHeightPx / 2) + $boxbut]
set canvasHeightPx [expr $Ndrawers * $drawerHeightPx]
set drawerCNT 0
set Ndrawers [expr {[array size but] - 1}]
while { $drawerCNT <= $Ndrawers } {
set yLineLocPx [ expr (( $drawerCNT ) * $drawerHeightPx + $boxbut)]
#Линия перед текстом
$fr.can create line 
$xLocTextPx $yLineLocPx 
[expr $drawerWidthPx + $xLocTextPx] $yLineLocPx 
-fill "#a0a0a0" -width $widl
$fr.can create text [expr $xLocTextPx + 5] $yLocTextPx 
-anchor w 
-font fontTEMP_drawer 
-text "$but($drawerCNT)" 
-tag textlineTag($drawerCNT)
if {$drawerCNT == 0} {
if {$fr == ".fr1"} {
$fr.can bind textlineTag($drawerCNT)  <ButtonRelease-1>   {butImg "but1"}
} else {
$fr.can bind textlineTag($drawerCNT)  <ButtonRelease-1>   {butReturn}
}
} else {
frame .fn$drawerCNT -background white -relief flat -pady 0 -padx 0
set titul $but($drawerCNT)
set cmd "$fr.can bind textlineTag($drawerCNT)  <ButtonRelease-1>   {butCliked $drawerCNT .fn$drawerCNT}"
set cmd [subst "$cmd"]
eval $cmd 
set but1(0) "Возврат в основное меню"
page_func ".fn$drawerCNT" voda "$titul" "but1"
}
incr drawerCNT
set yLocTextPx [ expr $yLocTextPx + $drawerHeightPx]
#Завершаюшая линия
if { $drawerCNT > $Ndrawers } {
set yLineLocPx [ expr (( $drawerCNT ) * $drawerHeightPx + $boxbut)]
$fr.can create line $xLocTextPx $yLineLocPx 
[expr $drawerWidthPx + $xLocTextPx] $yLineLocPx 
-fill "#a0a0a0" -width $widl
}
}
}
#Собственно скрипт
#Считываем размеры экрана
set ::scrwidth [winfo screenwidth .]
set ::scrheight [winfo screenheight .]
set ::typetlf 0
#Проверяем, что это телефон
if {$::scrwidth < $::scrheight} {
set ::typetlf 1
}
set ::padls 20
set ::padlx 15
set ::padly 15
if {$::typetlf} {
wm attributes . -fullscreen 1
#Логотип продуктв
scaleImage logo_product 2
set ::padls 50
set ::padlx 75
set ::padly 50
} else {
#Конфигурирование виджета под смартфон
set ::scrwidth 370
set ::scrheight 700
wm minsize . $::scrwidth $::scrheight
set geometr $::scrwidth
append geometr "x"
append geometr $::scrheight
append geometr "+0+0"
wm geometry . $geometr
}
#Грузим картинки
image create photo voda -file [file join $mydir "imageme" "voda_400x800.png"]
#Логотип продукта
image create photo logo_product -file [file join $mydir "imageme" "validcertkey_51x24.png"] 
#Создаем название продукта
set name_product "CryptoArmPKCS-A" 
label .labtitul -image logo_product -compound left -fg snow -text $name_product -font {Arial 10 bold} -anchor w  -width [winfo screenwidth .] -pady $::padls -padx 10 -bg #222222 
pack .labtitul -anchor nw -expand 0 -fill x -side top  -padx 1 -pady 0
#Создаем страницы с функционалом
set i 1
ttk::frame .fr$i -pad 0 -padding 0
#Кнопки основного меню
set but(0) "Стартовая страница" 
set but(1) "Подписать документ"
set but(2) "Работаем с ЭП (PKCS7)" 
set but(3) "Запрос на сертификат" 
set but(4) "Просмотр запроса/сертификата" 
set but(5) "Список криптомеханизмов"
set but(6) "Просмотр ASN1-структуры" 
set but(7) "Объекты токена" 
set but(8) "Работаем с PKCS12/PFX" 
set but(9) "Самоподписанный сертификат"
set but(10) "Об Утилите/Дистрибутивы" 
set but(11) "Создать Токены"
set but(12) "Конфигурировние токена"
if {$::typetlf} {
scaleImage voda 3 2
}
#Создаем страницу с функционалом
page_func ".fr$i" voda "Функционал" "but"
#Отображаем страницу с функционалом
pack .fr$i -side top -anchor center -expand 1 -fill both -side top  -padx 0 -pady 0

Qoraalkani waxa kale oo uu u diyaariyaa meelo banaan badhanka hawl kasta:

Meelaha banaan waxaa ka buuxa qalabyo heersare ah iyo mawduucyo (calaamadaha, badhanka, iwm.). Mid ka mid ah meelaha banaan ee buuxsamay waxaa lagu arki karaa shaashadda koowaad ee midigta. Tan iyo marxaladdii ugu horeysay waxaan diirada saarnay la shaqeynta PKCS#12 weelka, koodhka ayaa loo adeegsaday ku dhawaad aan isbeddelin ee cryptoarmpkcs-A. Marxaladdan waxaa la fuliyaa hawlaha soo socda:

saxiix dukumeentiga (Cades-BES, CAdes-T, CAdes-XLT1);
Waxaan la shaqeynaa saxiixa elektarooniga ah (PKCS7), oo ay ku jiraan ku darida saxiixe;
Arag codsiyada shahaadooyinka/shahaadada:
Waxaan la shaqaynaa PKCS12/PFX;
ku saabsan utility/Qaybinta:

Hawlaha soo haray waxay aad ugu xiran yihiin PKCS#11 calaamadaha. Dejintooda dib ayaa loo dhigay ilaa sanadka cusub. Waxaa la qorsheeyay in lagu xidho calaamada software oo lagu xidho daruur calaamo.

Marka laga eego dhinaca shaqada, ku dhawaad wax walba waxay la mid yihiin utility cryptoarmpkcs. Laakiin waxaa jira kala duwanaansho. Tusaale ahaan, ka dib markaad saxiixdo dukumeenti, utility wuxuu ku weydiinayaa in saxiixa lagu xaqiijin doono website-ka Adeegyada Gobolka:

Markaad gujiso badhanka "Haa", browserka ayaa ku shubi doona bog si loo xaqiijiyo saxeexa dukumentiyada iyo shahaadooyinka. Aynu isla markiiba nidhaahno boggani maaha mid loogu talagalay shaashadda casriga ah. Tani waxay noqon doontaa mid la dareemo marka la dooranayo saxiixa iyo, haddii saxiixa uu go'o, faylka uu ku jiro dukumeentigu. Laakiin haddii wax walba ay fiican yihiin, markaa waxaan heli doonaa natiijo wanaagsan:

Waa in maskaxda lagu hayaa in hubinta saxeexa iyo shahaadada labadaba ee shabakada Adeegyada Gobolka ay macno samaynayso kaliya haddii shahaadada laga helay xarun shahaado la aqoonsan yahay (CA). Haddii kale, saxiixu had iyo jeer wuxuu ahaan doonaa mid aan sax ahayn.

Si aan ugu waco browserka, waxa aan ku qasbanaay in aan ku daro dhawr sadar nidaamka openUrl:

proc openURL {url} {
global typesys
global macos
#  global windowsOS
#проверка, что утилита выполняется на смартфоне Android
if {$::typetlf} {
#Запуск браузера
borg activity android.intent.action.VIEW $url text/html
return
}
. . .
}

browserka ku jira Android waxa loo yaqaan sidan soo socota:

borg activity android.intent.action.VIEW <URL> text/html

Waxa jira wax u gaar ah marka lagu daro saxeexe cusub dukumeenti hore loo saxeexay. Shahaadada saxiixaha cusub (ama, xitaa PKCS#12 weel wata shahaado iyo fure gaar ah) waa in horay loogu doortaa bogga "Saxiix dukumeenti" ama "La shaqeynta PKCS12/PFX", kaas oo tamarta ay ku xasuusin doonto :

Inta lagu jiro hawlgallada muddada dheer, saacaddu waxay sii wadi doontaa inay saxdo:

Waxa hadhay oo dhan waa in la sheego meesha laga soo dejiyo qaybinta oo aan kuugu hambalyeeyo sanadka cusub ee soo socda oo qof walba u rajeeyo wanaag 2020!

Markaa, qaybinta Linux, OS X, Windows iyo Android:

Source: www.habr.com

Goobta shaqada Cryptographic ee ku salaysan halbeegyada furaha dadweynaha ee madal Android

Add a comment cancel reply