Ke nako ea ho bonts'a mokhoa oa ho sebetsa oa cryptographic o ipapisitseng le maemo a bohlokoa a sechaba e sebetsa ho e 'ngoe ea li-platform tsa mobile, e leng Android.
Khopolo e ileng ea behoa ha ho ntse ho etsoa sesebelisoa sa cryptoarmpkcs ke hore mosebedisi o lokela ho ba le mathata a fokolang ha a theha le ho netefatsa saena ea elektroniki. Ke ka lebaka leo re sisinyang ho sebelisa li-tokens tsa cryptographic e le sesebelisoa sa bohlokoa bakeng sa setifikeiti sa hau le/kapa lijana tse sireletsehileng . Ho tlameha ho boleloa hore tšebeliso ea PKCS#12 maemong a mangata e fetoha hoo e batlang e le eona feela e ka khonehang, mohlala, ha li-tokens tse tšoanang tsa PKCS # 11 li se na tšehetso bakeng sa liforomo tse itseng. Kahoo re ile ra etsa qeto ea ho qala ho tsamaisa lisebelisoa tsa cryptoarmpkcs sethaleng sa Android ka tšehetso ea lijana tse sireletsehileng tsa PKCS#12.
A re ke re hlokomele hang-hang hore kaha morero o ne o etsoa sethaleng sa C le Tcl / Tk, ho tsamaisa thepa ha hoa ka ha baka mathata leha e le afe a motheo. Sena se ile sa khoneha ka lebaka la theknoloji . Ka ho manolla le Ho ne ho se na mathata (tikoloho ea ka ea mosebetsi ke Linux - Mageia-7.0). Ke tla fana ka sengoloa se le seng feela bakeng sa ho tsamaisa Lisebelisoa tsa Line ea Taelo ea Android (sdk-tools-linux-xxxx.zip):
#!/bin/sh
if [ $# -ne 1 ]
then
echo "./InstallAndroidSDK.sh <sdk-tools-linux-xxxxxxxx.zip>"
echo "Не указан архив или число параметров больше 1"
exit 1
fi
if [ ! -f $1 ]
then
echo "./InstallAndroidSDK.sh <sdk-tools-linux-xxxxxxxx.zip>"
echo "архив $1 отсутствует"
exit 1
fi
#Распаковываем SDK-TOOLS в папку tools
#unzip sdk-tools-linux-4333796.zip
unzip $1
#Создаем папку android-sdk-linux
mkdir android-sdk-linux
#Перемещвем папку tools в android-sdk-linux
mv tools android-sdk-linux
cd android-sdk-linux/tools/bin
./sdkmanager "platform-tools" "platforms;android-29" Ntho e tsotehang ka ho fetisisa ke hore tikoloho ea Androwish e kenyelletsa bafetoleli ba babeli, undrowish-xxx le vanillawish-xxx, tse ts'oanang ka ho feletseng ka ho hlophisoa ha "balalaikas" (liphutheloana) tse kenyelletsoeng Androwish ka boeona. Phapang lipakeng tsa undrowish le vanillawish ke hore vanillawish e na le SDL/AGG/freetype based backend:
Ho ba teng ha lits'ebeletso tsena tse peli ho u fa monyetla oa ho nts'etsapele sesebelisoa ntle le ho sebelisa Android ka boeona le emulator ea eona e nang le tekanyo e kholo ea sesebelisoa sa 'nete. Pele ho tsohle, sena ke, ehlile, uandroidwish-xxx.
Sephutheloana sa 'nete sa tloaelo bakeng sa Android se hahiloe tikolohong ea AWSDK. Sefate sa hau sa projeke se lokela ho isoa ho ~/AWSDK/assets/app foldareng. Tabeng ena, mojule oa mantlha oa projeke ea hau e tlameha ho reha lebitso la main.tcl. Haeba u sebelisa li-balalaika tse eketsehileng tse nang le lilaebrari tse matla, joale lilaebrari li tlameha ho behoa ka har'a lifoldara ~/AWSDK/libs/x86 bakeng sa emulator le ~/AWSDK/libs/armeabi bakeng sa sesebelisoa sa sebele.
Ka mor'a sena, tsamaisa feela taelo:
$wish ~/AWSDK/tools/bonesmme o latele ditaelo tsa hae:
Sephutheloana sa apk se tla be se fumaneha ho ~/AWSDK/build/outputs/apk foldareng.
Haeba u na le sesebelisoa sa 'nete kapa emulator e hokahaneng, sephutheloana se ka kenngoa hang-hang.
Tabeng ena, sesebelisoa sa sebele se tlameha ho ba boemong ba ho lokisa liphoso.
Empa ha re khutleleng ts'ebelisong ka boeona. Ke eng e neng e tlameha ho fetoloa ho eona?
Ka tlhaho, liphetoho li amana haholo le boholo ba skrine. Ke ile ka tlameha ho hlophisa bocha ka sehloohong (fensetere ea ho qala). Ka lebaka leo, ho e-na le fensetere e le 'ngoe khomphuteng e tloaelehileng:
Ho hlahile lifensetere tse tharo ho Android:
Fesetere ea pele e na le tlhaiso-leseling. Conventionally, e arotsoe ka likarolo tse 'maloa. Karolo ea pele, e kaholimo, e na le lebitso la ts'ebeliso le logo ea eona.
E latelang ho tla logo ea moetsi, leqephe la tlhahisoleseling le likonopo tse tharo tse tlatsang leqephe.
Leqephe le ngotsoe ho sebelisoa karolo ea canvas. Leqephe lena le sebelisa mefuta e 'meli ea likonopo: e' ngoe e le sebopeho sa khutlonnetsepa (bohareng), 'me tse ling tse peli e le khutlonnetsepa e nang le likhutlo tse chitja. Ho ne ho sebelisoa balalaika ho etsa likonopo tse nang le likhutlo tse chitja . Ka bonna, balalaika ena e ile ea nkhahla haholo. Ka tlhaho, ha u sebetsa ka seile, geometry e nka karolo ea tau ea khoutu. Ka tlase ke mongolo create_titul_page.tcl ho theha leqephe la pele la ts'ebeliso. Mang kapa mang a ka e hlophisa ho lumellana le pono ea bona.
Script create_titul_page.tcl
package require Tk
package require tkpath 0.3.0
global mydir
set mydir [file dirname [info script]]
#Грузим картинки
#Логотип продукта
image create photo logo_product -file [file join $mydir "imageme" "validcertkey_51x24.png"]
#Логотип производителя
image create photo logo_orel -file [file join $mydir "imageme" "я_орел_425x200.png"] -format "png -alpha 1.0"
#Андроида с tcl/tk
image create photo logo_and -file [file join $mydir "imageme" "AndTk_inv_147x173.png"] -format "png -alpha 1.0"
#Свиток опечатанный
image create photo svitok -file [file join $mydir "imageme" "blue_svitok.png"] -format "png -alpha 1.0"
#Плитка
image create photo tileand -file [file join $mydir "imageme" "tile_green_and_32x32.png"] -format "png -alpha 1.0"
#Увеличить/уменьшить (отрицательное значение - уменьшение)
proc scaleImage {im xfactor {yfactor 0}} {
set mode -subsample
if {$xfactor>=0 && $yfactor>=0} {
set mode -zoom
} else {
set xfactor [expr $xfactor * -1]
}
if {$yfactor == 0} {set yfactor $xfactor}
set t [image create photo]
$t copy $im
$im blank
$im copy $t -shrink $mode $xfactor $yfactor
image delete $t
}
proc createtile {w backg} {
image create photo tiled
tiled copy $backg -to 0 0 $::scrwidth $::scrheight -shrink
$backg copy tiled
image delete tiled
# Мостим холст
$w create image 0 0
-image $backg
-anchor nw
}
proc create_rectangle {canv img x1 y1 x2 y2 color alfa {wbd 0} {colorline black} } {
image create photo $img -format "default -colorformat rgb"
set rgb1 [winfo rgb $canv $color]
set cr [lindex $rgb1 0]
set cg [lindex $rgb1 1]
set cb [lindex $rgb1 2]
set fill [format "#%04x%04x%04x" $cr $cg $cb ]
#Создаем цветной праямоугольник
$img put $fill -to 0 0 [expr {$x2 - $x1}] [expr {$y2 -$y1}]
#Сохраняем картинку
set dimg [$img data -format png]
#Создаем image с учетом alpha канала
image create photo $img -data $dimg -format "png -alpha $alfa"
# $img put [list $rgb1] -to 0 0 [expr {$x2 - $x1}] [expr {$y2 -$y1}]
#Отображаем цветной прямоугольник
set imgr [$canv create image $x1 $y1 -image $img -anchor nw]
set cc [subst {butImg $img}]
$canv bind $imgr <ButtonPress-1> $cc
#Оконтовка вокруг цветного прямоугольника
if {$wbd > 0 } {
set item [$canv create rect $x1 $y1 $x2 $y2 -outline $colorline -width $wbd ]
$canv bind $item <ButtonPress-1> $cc
}
return $imgr
}
proc butImg {img} {
tk_messageBox -title "Кнопка" -icon info -message "Нажали кнопку=$img" -detail "::screenwidth=$::scrwidthn::screenheight=$::scrheight" -parent .
if {$img == "exit"} {
set answer [tk_dialog .dialog2 "Конец работы" "Вы действительноnхотите выйти?" question 0 "Да" "Нет" ]
if {$answer == 0} {
exit
}
}
}
proc page_titul {fr logo_manufacturer} {
global mydir
#Создаем холст на весь экран
tkp::canvas $fr.can -borderwidth 0 -height [winfo screenheight .] -width [winfo screenwidth .] -relief flat
#Мостим холст плиткой
createtile "$fr.can" "tileand"
pack $fr.can -anchor center -expand 1 -fill both -side top -padx 0 -pady 0
#Вычисляем координаты для логотипа производителя
#update чтобы обновилась информация в БД об окнах
update
# set aa [winfo height $fr.labtitul]
set aa $::padly
#Центрируем логотип разработчика
set ha [image width $logo_manufacturer]
set xman [expr {($::scrwidth - $ha) / 2 }]
$fr.can create image $xman $aa -image $logo_manufacturer -anchor nw -tag tag_logo
set blogo [$fr.can bbox tag_logo]
set wexit [lindex $blogo 3]
if {$::typetlf } {
set dlx [expr {$::padlx / 1}]
$fr.can create text [expr $dlx + 6] [expr {$wexit + $::padly + 6}] -anchor nw -text "Электронная подпись" -fill black -font {{Roboto Condensed Medium} 15 }
$fr.can create text $dlx [expr {$wexit + $::padly}] -anchor nw -text "Электронная подпись" -fill white -font {{Roboto Condensed Medium} 15 } -tag id_text0
update
set blogo [$fr.can bbox id_text0]
set wexit [lindex $blogo 3]
$fr.can create text [expr $dlx + 4] [expr {$wexit + $::padly + 4 - 80}] -anchor nw -text "для платформы Android" -fill black -font {{Roboto Condensed Medium} 13}
$fr.can create text $dlx [expr {$wexit + $::padly - 80}] -anchor nw -text "для платформы Android" -fill white -font {{Roboto Condensed Medium} 13} -tag id_text1
set blogo [$fr.can bbox id_text1]
set wexit [lindex $blogo 3]
$fr.can create text [expr $dlx + 3] [expr {$wexit + $::padly + 3 - 50}] -anchor nw -text "№ 63 ФЗ "Об электроннойnподписи от 6 апреля 2011 года"" -fill black -font {{Roboto} 10}
$fr.can create text $dlx [expr {$wexit + $::padly - 50}] -anchor nw -text "№ 63 ФЗ "Об электроннойnподписи от 6 апреля 2011 года"" -fill white -font {{Roboto} 10} -tag id_text2
set blogo [$fr.can bbox id_text2]
set wexit [lindex $blogo 3]
$fr.can create text [expr $dlx + 2] [expr {$wexit + $::padly + 2 - 40}] -text "Авторы: В.Н. Орловnhttp://soft.lissi.ru, http://www.lissi.run+7(495)589-99-53ne-mail: [email protected]"
-anchor nw -fill black -font {{Roboto} 9}
$fr.can create text $dlx [expr {$wexit + $::padly - 40}] -text "Авторы: В.Н. Орловnhttp://soft.lissi.ru, http://www.lissi.run+7(495)589-99-53ne-mail: [email protected]"
-anchor nw -fill white -tag id_text3 -font {{Roboto} 9}
} else {
$fr.can create text [expr $::padlx + 2] [expr {$wexit + $::padly + 2}] -anchor nw -text "Электронная подпись" -fill black -font {{Nimbus Sans Narrow} 20}
$fr.can create text $::padlx [expr {$wexit + $::padly}] -anchor nw -text "Электронная подпись" -fill white -font {{Nimbus Sans Narrow} 20} -tag id_text0
set blogo [$fr.can bbox id_text0]
set wexit [lindex $blogo 3]
$fr.can create text [expr $::padlx + 2] [expr {$wexit + $::padly + 2 - 20}] -anchor nw -text "для платформы Android" -fill black -font {{Nimbus Sans Narrow} 18}
$fr.can create text $::padlx [expr {$wexit + $::padly - 20}] -anchor nw -text "для платформы Android" -fill white -font {{Nimbus Sans Narrow} 18} -tag id_text1
set blogo [$fr.can bbox id_text1]
set wexit [lindex $blogo 3]
$fr.can create text [expr $::padlx + 2] [expr {$wexit + $::padly + 2}] -anchor nw -text "№ 63 ФЗ "Об электроннойnподписи от 6 апреля 2011 года"" -fill black -font {{Nimbus Sans Narrow} 14}
$fr.can create text $::padlx [expr {$wexit + $::padly}] -anchor nw -text "№ 63 ФЗ "Об электроннойnподписи от 6 апреля 2011 года"" -fill white -font {{Nimbus Sans Narrow} 14} -tag id_text2
set blogo [$fr.can bbox id_text2]
set wexit [lindex $blogo 3]
$fr.can create text [expr $::padlx + 1] [expr {$wexit + $::padly + 1}] -text "Авторы: В.Н. Орловnhttp://soft.lissi.ru, http://www.lissi.run+7(495)589-99-53ne-mail: [email protected]"
-anchor nw -fill black -font {{Nimbus Sans Narrow} 12}
$fr.can create text $::padlx [expr {$wexit + $::padly}] -text "Авторы: В.Н. Орловnhttp://soft.lissi.ru, http://www.lissi.run+7(495)589-99-53ne-mail: [email protected]"
-anchor nw -fill white -tag id_text3 -font {{Nimbus Sans Narrow} 12} -tag id_text3
set blogo [$fr.can bbox id_text2]
}
set blogo [$fr.can bbox id_text3]
set wland [lindex $blogo 3]
$fr.can create image $::padlx $wland -image logo_and -anchor nw -tag tag_land
set ha [image height logo_and]
set wa [image width logo_and]
set ha1 [expr {$ha - ($ha / 2 ) }]
$fr.can create image [expr {$wa - 80 }] [expr {$wland + $ha1}] -image svitok -anchor nw -tag tag_land
if {$::typetlf} {
set x1 [expr {$::padlx / 2}]
set y1 [expr {$wland + 120}]
set x2 [expr {$::::scrwidth - $x1}]
set y2 [expr {$y1 + 120}]
set wd 8
set rr 18
} else {
set x1 [expr {$::padlx / 2}]
set y1 [expr {$wland + 40}]
set x2 [expr {$::::scrwidth - $x1}]
set y2 [expr {$y1 + 40}]
set wd 4
set rr 6
}
set g5 [$fr.can gradient create linear -stops {{0 lightgreen} {1 green}}]
set S3 [$fr.can style create -stroke "skyblue" -fill $g5 -strokewidth $wd -fillopacity 0.6]
set im1 [$fr.can create prect $x1 $y1 $x2 $y2 -rx $rr -style $S3]
$fr.can bind $im1 <ButtonPress-1> {butImg "img1"}
#Печатаем техт
set blogo [$fr.can bbox $im1]
set by2 [lindex $blogo 3]
set by1 [lindex $blogo 1]
set bb [expr {($by2 - $by1) / 2}]
set bx2 [lindex $blogo 2]
set bx1 [lindex $blogo 0]
set bbx [expr {($bx2 - $bx1) / 2}]
set txt1 [$fr.can create text [expr {$x1 + $::padlx * 2}] [expr {$y1 + 1 }] -anchor nw -text "Сайт разработчика" -fill black -font {{Arial} 10 normal}]
#Центрируем техт
set btxt1 [$fr.can bbox $txt1]
#Смещение по оси Y
set ty2 [lindex $btxt1 3]
set ty1 [lindex $btxt1 1]
set tt [expr {$ty2 - $ty1}]
set tt [expr {$tt / 2}]
set offsy [expr {($by1 + $bb) - ($ty1 + $tt)}]
#Смещение по оси X
set tx2 [lindex $btxt1 2]
set tx1 [lindex $btxt1 0]
set ttx [expr {$tx2 - $tx1}]
set ttx [expr {$ttx / 2}]
set offsx [expr {($bx1 + $bbx) - ($tx1 + $ttx)}]
$fr.can move $txt1 $offsx $offsy
$fr.can bind $txt1 <ButtonPress-1> {butImg "img1"}
if {$::typetlf} {
set y1 [expr $y2 + 40]
set x2 [expr {$::::scrwidth - $x1}]
set y2 [expr {$y1 + 120}]
} else {
set y1 [expr {$y1 + 60}]
set x2 [expr {$::::scrwidth - $x1}]
set y2 [expr {$y1 + 40}]
}
set im1 [create_rectangle $fr.can "but2" $x1 $y1 $x2 $y2 "#2b972d" 0.6 $wd "skyblue"]
#Печатаем техт
set blogo [$fr.can bbox $im1]
set by2 [lindex $blogo 3]
set by1 [lindex $blogo 1]
set bb [expr {($by2 - $by1) / 2}]
set bx2 [lindex $blogo 2]
set bx1 [lindex $blogo 0]
set bbx [expr {($bx2 - $bx1) / 2}]
set txt1 [$fr.can create text [expr {$x1 + $::padlx * 2}] [expr {$y1 + 1 }] -anchor nw -text "Переход в основное меню" -fill black -font {{Roboto Condensed Medium} 12}]
#Центрируем текст
set btxt1 [$fr.can bbox $txt1]
#Смещение по оси Y
set ty2 [lindex $btxt1 3]
set ty1 [lindex $btxt1 1]
set tt [expr {$ty2 - $ty1}]
set tt [expr {$tt / 2}]
set offsy [expr {($by1 + $bb) - ($ty1 + $tt)}]
#Смещение по оси X
set tx2 [lindex $btxt1 2]
set tx1 [lindex $btxt1 0]
set ttx [expr {$tx2 - $tx1}]
set ttx [expr {$ttx / 2}]
set offsx [expr {($bx1 + $bbx) - ($tx1 + $ttx)}]
$fr.can move $txt1 $offsx $offsy
$fr.can bind $txt1 <ButtonPress-1> {butImg "but2"}
if {$::typetlf} {
set x1 [expr {$::padlx / 2}]
set y1 [expr $y2 + 40]
set x2 [expr {$::::scrwidth - $x1}]
set y2 [expr {$y1 + 120}]
} else {
set x1 [expr {$::padlx / 2}]
set y1 [expr {$y1 + 60}]
set x2 [expr {$::::scrwidth - $x1}]
set y2 [expr {$y1 + 40}]
}
set S3 [$fr.can style create -stroke skyblue -fill $g5 -strokewidth $wd -fillopacity 0.6]
set im1 [$fr.can create prect $x1 $y1 $x2 $y2 -rx $rr -style $S3]
set blogo [$fr.can bbox $im1]
$fr.can bind $im1 <ButtonPress-1> {butImg "exit"}
set by2 [lindex $blogo 3]
set by1 [lindex $blogo 1]
set bb [expr {($by2 - $by1) / 2}]
set bx2 [lindex $blogo 2]
set bx1 [lindex $blogo 0]
set bbx [expr {($bx2 - $bx1) / 2}]
set txt1 [$fr.can create text [expr {$x1 + $::padlx * 2}] [expr {$y1 + 1 }] -anchor nw -text "Конец работы" -fill black -font {Arial 10 normal}]
$fr.can bind $txt1 <ButtonPress-1> {butImg "exit"}
set btxt1 [$fr.can bbox $txt1]
#Смещение по оси Y
set ty2 [lindex $btxt1 3]
set ty1 [lindex $btxt1 1]
set tt [expr {$ty2 - $ty1}]
set tt [expr {$tt / 2}]
set offsy [expr {($by1 + $bb) - ($ty1 + $tt)}]
#Смещение по оси X
set tx2 [lindex $btxt1 2]
set tx1 [lindex $btxt1 0]
set ttx [expr {$tx2 - $tx1}]
set ttx [expr {$ttx / 2}]
set offsx [expr {($bx1 + $bbx) - ($tx1 + $ttx)}]
$fr.can move $txt1 $offsx $offsy
}
#Собственно скрипт
#Считываем размеры экрана
set ::scrwidth [winfo screenwidth .]
set ::scrheight [winfo screenheight .]
set ::typetlf 0
#Проверяем, что это телефон
if {$::scrwidth < $::scrheight} {
set ::typetlf 1
}
set ::padls 20
set ::padlx 15
set ::padly 15
if {$::typetlf} {
wm attributes . -fullscreen 1
scaleImage icon_openfile_18x16 3
scaleImage ::img::view_18x16 3
#Логотип производителя
scaleImage logo_orel 2
#Логотип продуктв
scaleImage logo_product 2
#Андроида tcl/tk
scaleImage logo_and 3
#Свиток опечатанный
scaleImage svitok 4
set ::padls 50
set ::padlx 75
set ::padly 50
} else {
#Конфигурирование виджета под смартфон
scaleImage logo_orel -2
set ::scrwidth 370
set ::scrheight 700
wm minsize . $::scrwidth $::scrheight
set geometr $::scrwidth
append geometr "x"
append geometr $::scrheight
append geometr "+0+0"
wm geometry . $geometr
}
#Создаем название продукта
set name_product "CryptoArmPKCS-A"
label .labtitul -image logo_product -compound left -fg snow -text $name_product -font {Arial 10 bold} -anchor w -width [winfo screenwidth .] -pady $::padls -padx 10 -bg #222222
pack .labtitul -anchor nw -expand 0 -fill x -side top -padx 1 -pady 0
#Создаем стартовую страницу
set i 0
ttk::frame .fr$i -pad 0 -padding 0
page_titul ".fr$i" "logo_orel"
pack .fr$i -side top -anchor center -expand 1 -fill both -side top -padx 0 -pady 0
updateHo kenya mongolo ona, sebelisa e 'ngoe ea lisebelisoa tsa unroidwish kapa vanillawish:
$ /usr/local/bin64/undroidwish-e5dc71ed9d-linux64 create_titul_page.tcl kapa
$/usr/local/bin64/vanillawish-e5dc71ed9d-linux64 create_titul_page.tcl Sephetho se bontšoa skrineng sa pele.
Leqephe la bobeli le thathamisa ts'ebetso e tšehetsoeng ke cryptoarmpkcs-A utility. Mohala o mong le o mong ke konopo, ha o tobetse, leqephe le sebetsang le tla hlahisoa. Geometry ea sebaka sa konopo leqepheng lena e khethoa ke fonte e sebelisoang. Ka tlase ke sengoloa sa create_page_functions.tcl ho theha leqephe la bobeli/le sebetsang la ts'ebeliso. Mang kapa mang a ka e hlophisa ho lumellana le mesebetsi ea bona.
Script create_page_functions.tcl
package require Tk
package require tkpath 0.3.0
global mydir
set mydir [file dirname [info script]]
#Увеличить/уменьшить (отрицательное значение - уменьшение)
proc scaleImage {im xfactor {yfactor 0}} {
set mode -subsample
if {$xfactor>=0 && $yfactor>=0} {
set mode -zoom
} else {
set xfactor [expr $xfactor * -1]
}
if {$yfactor == 0} {set yfactor $xfactor}
set t [image create photo]
$t copy $im
$im blank
$im copy $t -shrink $mode $xfactor $yfactor
image delete $t
}
proc createtile {w backg} {
image create photo tiled
tiled copy $backg -to 0 0 $::scrwidth $::scrheight -shrink
$backg copy tiled
image delete tiled
# Мостим холст
$w create image 0 0
-image $backg
-anchor nw
}
proc butCliked {num fr} {
pack forget .fr1
set ::tekFrfunc $fr
pack $fr -side top -anchor center -expand 1 -fill both -side top -padx 0 -pady 0
tk_dialog .dialog1 "Dear user:" "Button $num was clickednFr=$fr" info 0 OK
}
proc butImg {img} {
tk_messageBox -title "Кнопка" -icon info -message "Нажали кнопку=$img" -detail "::screenwidth=$::scrwidthn::screenheight=$::scrheight" -parent .
if {$img == "exit"} {
set answer [tk_dialog .dialog2 "Конец работы" "Вы действительноnхотите выйти?" question 0 "Да" "Нет" ]
if {$answer == 0} {
exit
}
}
}
proc butReturn {} {
pack forget $::tekFrfunc
pack .fr1 -side top -anchor center -expand 1 -fill both -side top -padx 0 -pady 0
# tk_dialog .dialog1 "Dear user:" "Button $num was clickednFr=$fr" info 0 OK
}
proc page_func {fr tile titul functions} {
#Кнопки меню
upvar $functions but
#Создаем шрифт для кнопок
if {$::typetlf} {
set feFONT_button "-family {Roboto} -size 9 -weight bold -slant roman"
set widl 10
} else {
set feFONT_button "-family {Arial} -size 12 -weight bold -slant roman"
set widl 5
}
catch {font delete fontTEMP_drawer}
eval font create fontTEMP_drawer $feFONT_button
#Вычисляем максимальныю длину текста
set drawerCNT 0
set strMaxWidthPx 15
set Ndrawers [expr {[array size but] - 1}]
while { $drawerCNT <= $Ndrawers } {
set strWidthPx [font measure fontTEMP_drawer "$but($drawerCNT)"]
if { $strWidthPx > $strMaxWidthPx } {
set strMaxWidthPx $strWidthPx
}
incr drawerCNT
}
set drawerWidthPx [expr $strMaxWidthPx + 10]
set xxx [expr {($::::scrwidth - $drawerWidthPx) / 2}]
if {$fr != ".fr1"} {
set hret [expr $::scrheight / 4]
} else {
set hret $::scrheight
}
set hret [expr $::scrheight / 4]
tkp::canvas $fr.can -borderwidth 0 -height $hret -width $::scrwidth -relief flat
#Мостим холст плиткой
createtile "$fr.can" $tile
pack $fr.can -anchor center -expand 1 -fill both -side top -padx 0 -pady 0
if {$titul != "" } {
set allfunc $titul
catch {font delete fontTEMP_titul}
set font_titul "-family {Roboto Condensed Medium} -size 15"
eval font create fontTEMP_titul $font_titul
set funcWidthPx [font measure fontTEMP_titul "$allfunc"]
set dlx [expr {($::::scrwidth - $funcWidthPx) / 2}]
$fr.can create text [expr $dlx + 6] [expr {6 + 6}] -anchor nw -text "$allfunc" -fill black -font fontTEMP_titul
$fr.can create text $dlx 6 -anchor nw -text "$allfunc" -fill white -font fontTEMP_titul -tag id_text0
set blogo [$fr.can bbox id_text0]
set boxbut [expr ([lindex $blogo 3] + 6 + 6)]
} else {
set boxbut [expr 6 + 6]
}
#Вычисляем самый широкий текст у кнопок
#См. выше
#Размещаем кнопки
set BDwidth_canvas 0
set maxTextHeightPx [font metrics fontTEMP_drawer -linespace]
set maxTextHeightPx [expr {$maxTextHeightPx + ( $maxTextHeightPx / 2)}]
set drawerHeightPx $maxTextHeightPx
set xLocTextPx [expr {($::::scrwidth - $drawerWidthPx) / 2}]
set yLocTextPx [expr $BDwidth_canvas + ($drawerHeightPx / 2) + $boxbut]
set canvasHeightPx [expr $Ndrawers * $drawerHeightPx]
set drawerCNT 0
set Ndrawers [expr {[array size but] - 1}]
while { $drawerCNT <= $Ndrawers } {
set yLineLocPx [ expr (( $drawerCNT ) * $drawerHeightPx + $boxbut)]
#Линия перед текстом
$fr.can create line
$xLocTextPx $yLineLocPx
[expr $drawerWidthPx + $xLocTextPx] $yLineLocPx
-fill "#a0a0a0" -width $widl
$fr.can create text [expr $xLocTextPx + 5] $yLocTextPx
-anchor w
-font fontTEMP_drawer
-text "$but($drawerCNT)"
-tag textlineTag($drawerCNT)
if {$drawerCNT == 0} {
if {$fr == ".fr1"} {
$fr.can bind textlineTag($drawerCNT) <ButtonRelease-1> {butImg "but1"}
} else {
$fr.can bind textlineTag($drawerCNT) <ButtonRelease-1> {butReturn}
}
} else {
frame .fn$drawerCNT -background white -relief flat -pady 0 -padx 0
set titul $but($drawerCNT)
set cmd "$fr.can bind textlineTag($drawerCNT) <ButtonRelease-1> {butCliked $drawerCNT .fn$drawerCNT}"
set cmd [subst "$cmd"]
eval $cmd
set but1(0) "Возврат в основное меню"
page_func ".fn$drawerCNT" voda "$titul" "but1"
}
incr drawerCNT
set yLocTextPx [ expr $yLocTextPx + $drawerHeightPx]
#Завершаюшая линия
if { $drawerCNT > $Ndrawers } {
set yLineLocPx [ expr (( $drawerCNT ) * $drawerHeightPx + $boxbut)]
$fr.can create line $xLocTextPx $yLineLocPx
[expr $drawerWidthPx + $xLocTextPx] $yLineLocPx
-fill "#a0a0a0" -width $widl
}
}
}
#Собственно скрипт
#Считываем размеры экрана
set ::scrwidth [winfo screenwidth .]
set ::scrheight [winfo screenheight .]
set ::typetlf 0
#Проверяем, что это телефон
if {$::scrwidth < $::scrheight} {
set ::typetlf 1
}
set ::padls 20
set ::padlx 15
set ::padly 15
if {$::typetlf} {
wm attributes . -fullscreen 1
#Логотип продуктв
scaleImage logo_product 2
set ::padls 50
set ::padlx 75
set ::padly 50
} else {
#Конфигурирование виджета под смартфон
set ::scrwidth 370
set ::scrheight 700
wm minsize . $::scrwidth $::scrheight
set geometr $::scrwidth
append geometr "x"
append geometr $::scrheight
append geometr "+0+0"
wm geometry . $geometr
}
#Грузим картинки
image create photo voda -file [file join $mydir "imageme" "voda_400x800.png"]
#Логотип продукта
image create photo logo_product -file [file join $mydir "imageme" "validcertkey_51x24.png"]
#Создаем название продукта
set name_product "CryptoArmPKCS-A"
label .labtitul -image logo_product -compound left -fg snow -text $name_product -font {Arial 10 bold} -anchor w -width [winfo screenwidth .] -pady $::padls -padx 10 -bg #222222
pack .labtitul -anchor nw -expand 0 -fill x -side top -padx 1 -pady 0
#Создаем страницы с функционалом
set i 1
ttk::frame .fr$i -pad 0 -padding 0
#Кнопки основного меню
set but(0) "Стартовая страница"
set but(1) "Подписать документ"
set but(2) "Работаем с ЭП (PKCS7)"
set but(3) "Запрос на сертификат"
set but(4) "Просмотр запроса/сертификата"
set but(5) "Список криптомеханизмов"
set but(6) "Просмотр ASN1-структуры"
set but(7) "Объекты токена"
set but(8) "Работаем с PKCS12/PFX"
set but(9) "Самоподписанный сертификат"
set but(10) "Об Утилите/Дистрибутивы"
set but(11) "Создать Токены"
set but(12) "Конфигурировние токена"
if {$::typetlf} {
scaleImage voda 3 2
}
#Создаем страницу с функционалом
page_func ".fr$i" voda "Функционал" "but"
#Отображаем страницу с функционалом
pack .fr$i -side top -anchor center -expand 1 -fill both -side top -padx 0 -pady 0 Script ena e boetse e lokisa likheo bakeng sa konopo e 'ngoe le e' ngoe ea mosebetsi:
Likheo li tlatsitsoe ka li-widget tsa khale le tsa sehlooho (labelframe, konopo, joalo-joalo). E 'ngoe ea likheo tsena tse tlatsitsoeng e ka bonoa skrineng sa pele se ka ho le letona. Kaha mothating oa pele re tsepamisitse maikutlo ho sebetsa le setshelo sa PKCS#12, khoutu e ne e sebelisoa hoo e batlang e sa fetohe bakeng sa cryptoarmpkcs-A. Mothating ona ho kengoa tšebetsong mesebetsi e latelang:
- saena tokomane (Cades-BES, CAdes-T, CAdes-XLT1);
- Re sebetsa ka signature ea elektroniki (PKCS7), ho kenyelletsa le ho eketsa motho ea saenneng;
- Sheba litifikeiti/likopo tsa setifikeiti:
- Re sebetsa le PKCS12/PFX;
- mabapi le lisebelisoa / Likabelo:
Mesebetsi e setseng e amana haholoanyane le PKCS#11 tokens. Ho tsamaisoa ha bona ho chechisitsoe morao ho fihlela Selemo se Secha. Ho reriloe ho hokahanya lets'oao la software le ho hokela ho .
Ho latela pono e sebetsang, hoo e batlang e le ntho e 'ngoe le e' ngoe e tšoana le ts'ebeliso ea cryptoarmpkcs. Empa ho na le liphapang tse itseng. Mohlala, kamora ho saena tokomane, ts'ebeliso e botsa hore na tekeno e tla netefatsoa webosaeteng ea Litšebeletso tsa Naha:
Ha o tobetsa konopo ea "E", sebatli se tla kenya leqephe la ho netefatsa tekeno ea litokomane le litifikeiti. Ha re re hang-hang hore leqephe lena ha le hlile ha le etselitsoe skrineng sa smartphone. Sena se tla bonahala ha u khetha tekeno, 'me, haeba ho saena ho tlosoa, faele e nang le tokomane. Empa haeba tsohle li lokile, re tla fumana sephetho se setle:
Ho lokela ho hopoloa hore ho lekola tekeno le setifikeiti ho webosaete ea Litšebeletso tsa Naha hoa utloahala haeba setifikeiti se ile sa amoheloa setsing sa setifikeiti se ngolisitsoeng ka molao (). Ho seng joalo, tekeno e tla lula e sa sebetse.
Ho letsetsa sebatli, ke ile ka tlameha ho kenyelletsa mela e 'maloa ts'ebetsong ea openUrl:
proc openURL {url} {
global typesys
global macos
# global windowsOS
#проверка, что утилита выполняется на смартфоне Android
if {$::typetlf} {
#Запуск браузера
borg activity android.intent.action.VIEW $url text/html
return
}
. . .
}Sebatli ho Android se bitsoa ka tsela e latelang:
borg activity android.intent.action.VIEW <URL> text/html
Ho na le ntho e ikhethang ha u eketsa motho ea saenneng tokomane e saenneng pele. Setifikeiti se secha sa motho ea saenneng (kapa ho fapana le hoo, esita le setshelo sa PKCS#12 se nang le setifikeiti le senotlolo sa poraefete) se tlameha ho khethoa esale pele leqepheng la "Saena tokomane" kapa "Ho sebetsa le PKCS12/PFX", leo sesebelisoa se tla u hopotsa sona. :
Nakong ea ts'ebetso ea nako e telele, oache e tla tsoela pele ho tšoaea:
Ho setseng ke ho bolela hore na u ka khoasolla liphaello kae le ho u lebohela Selemong se Secha se tlang mme re lakaletsa bohle mahlohonolo ka 2020!
Kahoo, kabo ea Linux, OS X, Windows le Android:
Source: www.habr.com