Tandaan. transl.: ang may-akda ng artikulo - Erkan Erol, isang inhinyero mula sa SAP - nagbabahagi ng kanyang pag-aaral ng mga mekanismo ng paggana ng koponan kubectl exec, napakapamilyar sa lahat ng nagtatrabaho sa Kubernetes. Sinamahan niya ang buong algorithm ng mga listahan ng source code ng Kubernetes (at mga kaugnay na proyekto), na nagbibigay-daan sa iyong maunawaan ang paksa nang kasinglalim ng kinakailangan.
Isang Biyernes, lumapit sa akin ang isang kasamahan at nagtanong kung paano mag-execute ng command sa pod gamit . Hindi ako nakasagot sa kanya at biglang napagtanto na wala akong alam sa mekanismo ng operasyon kubectl exec. Oo, mayroon akong ilang mga ideya tungkol sa istraktura nito, ngunit hindi ako 100% sigurado sa kanilang kawastuhan at samakatuwid ay nagpasya akong harapin ang isyung ito. Ang pagkakaroon ng pag-aaral ng mga blog, dokumentasyon at source code, natutunan ko ang maraming mga bagong bagay, at sa artikulong ito nais kong ibahagi ang aking mga natuklasan at pag-unawa. Kung may mali, mangyaring makipag-ugnayan sa akin sa .
Pagsasanay
Upang lumikha ng isang kumpol sa isang MacBook, nag-clone ako . Pagkatapos ay naitama ko ang mga IP address ng mga node sa kubelet config, dahil hindi pinapayagan ng mga default na setting kubectl exec. Maaari mong basahin ang higit pa tungkol sa pangunahing dahilan para dito .
- Anumang kotse = aking MacBook
- Master node IP = 192.168.205.10
- Worker node IP = 192.168.205.11
- API server port = 6443
Piraso
- proseso ng kubectl exec: Kapag nag-execute kami ng βkubectl exec...β magsisimula na ang proseso. Magagawa ito sa anumang makina na may access sa K8s API server. Tandaan transl.: Dagdag pa sa mga listahan ng console, ginagamit ng may-akda ang komentong "anumang makina", na nagpapahiwatig na ang mga kasunod na utos ay maaaring isagawa sa alinmang ganoong makina na may access sa Kubernetes.
- : Isang bahagi sa master node na nagbibigay ng access sa Kubernetes API. Ito ang frontend para sa control plane sa Kubernetes.
- : Isang ahente na tumatakbo sa bawat node sa cluster. Tinitiyak nito ang pagpapatakbo ng mga lalagyan sa pod.
- (container runtime): Ang software na responsable para sa pagpapatakbo ng mga container. Mga halimbawa: Docker, CRI-O, containerdβ¦
- pinakabuod: OS kernel sa worker node; ay responsable para sa pamamahala ng proseso.
- target (target) lalagyan: isang lalagyan na bahagi ng isang pod at tumatakbo sa isa sa mga node ng manggagawa.
Ang natuklasan ko
1. Aktibidad sa panig ng kliyente
Gumawa ng pod sa isang namespace default:
// any machine
$ kubectl run exec-test-nginx --image=nginxPagkatapos ay isinasagawa namin ang exec command at maghintay ng 5000 segundo para sa karagdagang mga obserbasyon:
// any machine
$ kubectl exec -it exec-test-nginx-6558988d5-fgxgg -- sh
# sleep 5000Lumilitaw ang proseso ng kubectl (na may pid=8507 sa aming kaso):
// any machine
$ ps -ef |grep kubectl
501 8507 8409 0 7:19PM ttys000 0:00.13 kubectl exec -it exec-test-nginx-6558988d5-fgxgg -- shKung susuriin namin ang aktibidad ng network ng proseso, makikita namin na mayroon itong mga koneksyon sa api-server (192.168.205.10.6443):
// any machine
$ netstat -atnv |grep 8507
tcp4 0 0 192.168.205.1.51673 192.168.205.10.6443 ESTABLISHED 131072 131768 8507 0 0x0102 0x00000020
tcp4 0 0 192.168.205.1.51672 192.168.205.10.6443 ESTABLISHED 131072 131768 8507 0 0x0102 0x00000028Tingnan natin ang code. Lumilikha ang Kubectl ng POST na kahilingan gamit ang exec subresource at nagpapadala ng REST na kahilingan:
req := restClient.Post().
Resource("pods").
Name(pod.Name).
Namespace(pod.Namespace).
SubResource("exec")
req.VersionedParams(&corev1.PodExecOptions{
Container: containerName,
Command: p.Command,
Stdin: p.Stdin,
Stdout: p.Out != nil,
Stderr: p.ErrOut != nil,
TTY: t.Raw,
}, scheme.ParameterCodec)
return p.Executor.Execute("POST", req.URL(), p.Config, p.In, p.Out, p.ErrOut, t.Raw, sizeQueue)()
2. Aktibidad sa master node side
Maaari din naming obserbahan ang kahilingan sa gilid ng api-server:
handler.go:143] kube-apiserver: POST "/api/v1/namespaces/default/pods/exec-test-nginx-6558988d5-fgxgg/exec" satisfied by gorestful with webservice /api/v1
upgradeaware.go:261] Connecting to backend proxy (intercepting redirects) https://192.168.205.11:10250/exec/default/exec-test-nginx-6558988d5-fgxgg/exec-test-nginx?command=sh&input=1&output=1&tty=1
Headers: map[Connection:[Upgrade] Content-Length:[0] Upgrade:[SPDY/3.1] User-Agent:[kubectl/v1.12.10 (darwin/amd64) kubernetes/e3c1340] X-Forwarded-For:[192.168.205.1] X-Stream-Protocol-Version:[v4.channel.k8s.io v3.channel.k8s.io v2.channel.k8s.io channel.k8s.io]]Tandaan na ang kahilingan sa HTTP ay may kasamang kahilingan na baguhin ang protocol. ay nagbibigay-daan sa iyo upang multiplex ang indibidwal na stdin/stdout/stderr/spdy-error na "mga stream" sa isang koneksyon sa TCP.
Natatanggap ng server ng API ang kahilingan at kino-convert ito sa PodExecOptions:
// PodExecOptions is the query options to a Pod's remote exec call
type PodExecOptions struct {
metav1.TypeMeta
// Stdin if true indicates that stdin is to be redirected for the exec call
Stdin bool
// Stdout if true indicates that stdout is to be redirected for the exec call
Stdout bool
// Stderr if true indicates that stderr is to be redirected for the exec call
Stderr bool
// TTY if true indicates that a tty will be allocated for the exec call
TTY bool
// Container in which to execute the command.
Container string
// Command is the remote command to execute; argv array; not executed within a shell.
Command []string
}()
Upang maisagawa ang mga kinakailangang aksyon, dapat malaman ng api-server kung aling pod ang kailangan nitong kontakin:
// ExecLocation returns the exec URL for a pod container. If opts.Container is blank
// and only one container is present in the pod, that container is used.
func ExecLocation(
getter ResourceGetter,
connInfo client.ConnectionInfoGetter,
ctx context.Context,
name string,
opts *api.PodExecOptions,
) (*url.URL, http.RoundTripper, error) {
return streamLocation(getter, connInfo, ctx, name, opts, opts.Container, "exec")
}()
Siyempre, ang data tungkol sa endpoint ay kinuha mula sa impormasyon tungkol sa node:
nodeName := types.NodeName(pod.Spec.NodeName)
if len(nodeName) == 0 {
// If pod has not been assigned a host, return an empty location
return nil, nil, errors.NewBadRequest(fmt.Sprintf("pod %s does not have a host assigned", name))
}
nodeInfo, err := connInfo.GetConnectionInfo(ctx, nodeName)()
Hooray! Ang kubelet ay mayroon nang port (node.Status.DaemonEndpoints.KubeletEndpoint.Port), kung saan maaaring kumonekta ang API server:
// GetConnectionInfo retrieves connection info from the status of a Node API object.
func (k *NodeConnectionInfoGetter) GetConnectionInfo(ctx context.Context, nodeName types.NodeName) (*ConnectionInfo, error) {
node, err := k.nodes.Get(ctx, string(nodeName), metav1.GetOptions{})
if err != nil {
return nil, err
}
// Find a kubelet-reported address, using preferred address type
host, err := nodeutil.GetPreferredNodeAddress(node, k.preferredAddressTypes)
if err != nil {
return nil, err
}
// Use the kubelet-reported port, if present
port := int(node.Status.DaemonEndpoints.KubeletEndpoint.Port)
if port <= 0 {
port = k.defaultPort
}
return &ConnectionInfo{
Scheme: k.scheme,
Hostname: host,
Port: strconv.Itoa(port),
Transport: k.transport,
}, nil
}()
Mula sa dokumentasyon :
Ang mga koneksyon na ito ay ginawa sa HTTPS endpoint ng kubelet. Bilang default, hindi bini-verify ng apiserver ang sertipiko ng kubelet, na ginagawang mahina ang koneksyon sa mga pag-atake ng man-in-the-middle (MITM) at hindi ligtas para sa pagtatrabaho sa hindi mapagkakatiwalaan at/o mga pampublikong network.
Ngayon alam na ng API server ang endpoint at itinatatag ang koneksyon:
// Connect returns a handler for the pod exec proxy
func (r *ExecREST) Connect(ctx context.Context, name string, opts runtime.Object, responder rest.Responder) (http.Handler, error) {
execOpts, ok := opts.(*api.PodExecOptions)
if !ok {
return nil, fmt.Errorf("invalid options object: %#v", opts)
}
location, transport, err := pod.ExecLocation(r.Store, r.KubeletConn, ctx, name, execOpts)
if err != nil {
return nil, err
}
return newThrottledUpgradeAwareProxyHandler(location, transport, false, true, true, responder), nil
}()
Tingnan natin kung ano ang nangyayari sa master node.
Una, nalaman namin ang IP ng worker node. Sa aming kaso ito ay 192.168.205.11:
// any machine
$ kubectl get nodes k8s-node-1 -o wide
NAME STATUS ROLES AGE VERSION INTERNAL-IP EXTERNAL-IP OS-IMAGE KERNEL-VERSION CONTAINER-RUNTIME
k8s-node-1 Ready <none> 9h v1.15.3 192.168.205.11 <none> Ubuntu 16.04.6 LTS 4.4.0-159-generic docker://17.3.3Pagkatapos ay itakda ang kubelet port (10250 sa aming kaso):
// any machine
$ kubectl get nodes k8s-node-1 -o jsonpath='{.status.daemonEndpoints.kubeletEndpoint}'
map[Port:10250]
Ngayon ay oras na upang suriin ang network. Mayroon bang koneksyon sa worker node (192.168.205.11)? Ito ay! Kung pumatay ka ng isang proseso exec, mawawala ito, kaya alam ko na ang koneksyon ay itinatag ng api-server bilang resulta ng exec command na naisakatuparan.
// master node
$ netstat -atn |grep 192.168.205.11
tcp 0 0 192.168.205.10:37870 192.168.205.11:10250 ESTABLISHED
β¦
Bukas pa rin ang koneksyon sa pagitan ng kubectl at api-server. Bukod pa rito, may isa pang koneksyon na nag-uugnay sa api-server at kubelet.
3. Aktibidad sa worker node
Ngayon kumonekta tayo sa worker node at tingnan kung ano ang nangyayari dito.
Una sa lahat, nakikita natin na ang koneksyon dito ay itinatag din (pangalawang linya); Ang 192.168.205.10 ay ang IP ng master node:
// worker node
$ netstat -atn |grep 10250
tcp6 0 0 :::10250 :::* LISTEN
tcp6 0 0 192.168.205.11:10250 192.168.205.10:37870 ESTABLISHED
Paano naman ang team namin sleep? Hurray, andyan din siya!
// worker node
$ ps -afx
...
31463 ? Sl 0:00 _ docker-containerd-shim 7d974065bbb3107074ce31c51f5ef40aea8dcd535ae11a7b8f2dd180b8ed583a /var/run/docker/libcontainerd/7d974065bbb3107074ce31c51
31478 pts/0 Ss 0:00 _ sh
31485 pts/0 S+ 0:00 _ sleep 5000
β¦Ngunit teka: paano ito nakuha ni kubelet? Ang kubelet ay may daemon na nagbibigay ng access sa API sa pamamagitan ng port para sa mga kahilingan sa api-server:
// Server is the library interface to serve the stream requests.
type Server interface {
http.Handler
// Get the serving URL for the requests.
// Requests must not be nil. Responses may be nil iff an error is returned.
GetExec(*runtimeapi.ExecRequest) (*runtimeapi.ExecResponse, error)
GetAttach(req *runtimeapi.AttachRequest) (*runtimeapi.AttachResponse, error)
GetPortForward(*runtimeapi.PortForwardRequest) (*runtimeapi.PortForwardResponse, error)
// Start the server.
// addr is the address to serve on (address:port) stayUp indicates whether the server should
// listen until Stop() is called, or automatically stop after all expected connections are
// closed. Calling Get{Exec,Attach,PortForward} increments the expected connection count.
// Function does not return until the server is stopped.
Start(stayUp bool) error
// Stop the server, and terminate any open connections.
Stop() error
}()
Kinakalkula ng Kubelet ang endpoint ng tugon para sa mga kahilingan sa exec:
func (s *server) GetExec(req *runtimeapi.ExecRequest) (*runtimeapi.ExecResponse, error) {
if err := validateExecRequest(req); err != nil {
return nil, err
}
token, err := s.cache.Insert(req)
if err != nil {
return nil, err
}
return &runtimeapi.ExecResponse{
Url: s.buildURL("exec", token),
}, nil
}()
Huwag malito. Hindi nito ibinabalik ang resulta ng utos, ngunit ang endpoint para sa komunikasyon:
type ExecResponse struct {
// Fully qualified URL of the exec streaming server.
Url string `protobuf:"bytes,1,opt,name=url,proto3" json:"url,omitempty"`
XXX_NoUnkeyedLiteral struct{} `json:"-"`
XXX_sizecache int32 `json:"-"`
}()
Ipinapatupad ng Kubelet ang interface RuntimeServiceClient, na bahagi ng Container Runtime Interface (sumulat kami ng higit pa tungkol dito, halimbawa, β tinatayang. transl.):
Mahabang listahan mula sa cri-api sa kubernetes/kubernetes
// For semantics around ctx use and closing/ending streaming RPCs, please refer to https://godoc.org/google.golang.org/grpc#ClientConn.NewStream.
type RuntimeServiceClient interface {
// Version returns the runtime name, runtime version, and runtime API version.
Version(ctx context.Context, in *VersionRequest, opts ...grpc.CallOption) (*VersionResponse, error)
// RunPodSandbox creates and starts a pod-level sandbox. Runtimes must ensure
// the sandbox is in the ready state on success.
RunPodSandbox(ctx context.Context, in *RunPodSandboxRequest, opts ...grpc.CallOption) (*RunPodSandboxResponse, error)
// StopPodSandbox stops any running process that is part of the sandbox and
// reclaims network resources (e.g., IP addresses) allocated to the sandbox.
// If there are any running containers in the sandbox, they must be forcibly
// terminated.
// This call is idempotent, and must not return an error if all relevant
// resources have already been reclaimed. kubelet will call StopPodSandbox
// at least once before calling RemovePodSandbox. It will also attempt to
// reclaim resources eagerly, as soon as a sandbox is not needed. Hence,
// multiple StopPodSandbox calls are expected.
StopPodSandbox(ctx context.Context, in *StopPodSandboxRequest, opts ...grpc.CallOption) (*StopPodSandboxResponse, error)
// RemovePodSandbox removes the sandbox. If there are any running containers
// in the sandbox, they must be forcibly terminated and removed.
// This call is idempotent, and must not return an error if the sandbox has
// already been removed.
RemovePodSandbox(ctx context.Context, in *RemovePodSandboxRequest, opts ...grpc.CallOption) (*RemovePodSandboxResponse, error)
// PodSandboxStatus returns the status of the PodSandbox. If the PodSandbox is not
// present, returns an error.
PodSandboxStatus(ctx context.Context, in *PodSandboxStatusRequest, opts ...grpc.CallOption) (*PodSandboxStatusResponse, error)
// ListPodSandbox returns a list of PodSandboxes.
ListPodSandbox(ctx context.Context, in *ListPodSandboxRequest, opts ...grpc.CallOption) (*ListPodSandboxResponse, error)
// CreateContainer creates a new container in specified PodSandbox
CreateContainer(ctx context.Context, in *CreateContainerRequest, opts ...grpc.CallOption) (*CreateContainerResponse, error)
// StartContainer starts the container.
StartContainer(ctx context.Context, in *StartContainerRequest, opts ...grpc.CallOption) (*StartContainerResponse, error)
// StopContainer stops a running container with a grace period (i.e., timeout).
// This call is idempotent, and must not return an error if the container has
// already been stopped.
// TODO: what must the runtime do after the grace period is reached?
StopContainer(ctx context.Context, in *StopContainerRequest, opts ...grpc.CallOption) (*StopContainerResponse, error)
// RemoveContainer removes the container. If the container is running, the
// container must be forcibly removed.
// This call is idempotent, and must not return an error if the container has
// already been removed.
RemoveContainer(ctx context.Context, in *RemoveContainerRequest, opts ...grpc.CallOption) (*RemoveContainerResponse, error)
// ListContainers lists all containers by filters.
ListContainers(ctx context.Context, in *ListContainersRequest, opts ...grpc.CallOption) (*ListContainersResponse, error)
// ContainerStatus returns status of the container. If the container is not
// present, returns an error.
ContainerStatus(ctx context.Context, in *ContainerStatusRequest, opts ...grpc.CallOption) (*ContainerStatusResponse, error)
// UpdateContainerResources updates ContainerConfig of the container.
UpdateContainerResources(ctx context.Context, in *UpdateContainerResourcesRequest, opts ...grpc.CallOption) (*UpdateContainerResourcesResponse, error)
// ReopenContainerLog asks runtime to reopen the stdout/stderr log file
// for the container. This is often called after the log file has been
// rotated. If the container is not running, container runtime can choose
// to either create a new log file and return nil, or return an error.
// Once it returns error, new container log file MUST NOT be created.
ReopenContainerLog(ctx context.Context, in *ReopenContainerLogRequest, opts ...grpc.CallOption) (*ReopenContainerLogResponse, error)
// ExecSync runs a command in a container synchronously.
ExecSync(ctx context.Context, in *ExecSyncRequest, opts ...grpc.CallOption) (*ExecSyncResponse, error)
// Exec prepares a streaming endpoint to execute a command in the container.
Exec(ctx context.Context, in *ExecRequest, opts ...grpc.CallOption) (*ExecResponse, error)
// Attach prepares a streaming endpoint to attach to a running container.
Attach(ctx context.Context, in *AttachRequest, opts ...grpc.CallOption) (*AttachResponse, error)
// PortForward prepares a streaming endpoint to forward ports from a PodSandbox.
PortForward(ctx context.Context, in *PortForwardRequest, opts ...grpc.CallOption) (*PortForwardResponse, error)
// ContainerStats returns stats of the container. If the container does not
// exist, the call returns an error.
ContainerStats(ctx context.Context, in *ContainerStatsRequest, opts ...grpc.CallOption) (*ContainerStatsResponse, error)
// ListContainerStats returns stats of all running containers.
ListContainerStats(ctx context.Context, in *ListContainerStatsRequest, opts ...grpc.CallOption) (*ListContainerStatsResponse, error)
// UpdateRuntimeConfig updates the runtime configuration based on the given request.
UpdateRuntimeConfig(ctx context.Context, in *UpdateRuntimeConfigRequest, opts ...grpc.CallOption) (*UpdateRuntimeConfigResponse, error)
// Status returns the status of the runtime.
Status(ctx context.Context, in *StatusRequest, opts ...grpc.CallOption) (*StatusResponse, error)
}
()
Gumagamit lang ito ng gRPC para tumawag ng paraan sa pamamagitan ng Container Runtime Interface:
type runtimeServiceClient struct {
cc *grpc.ClientConn
}()
func (c *runtimeServiceClient) Exec(ctx context.Context, in *ExecRequest, opts ...grpc.CallOption) (*ExecResponse, error) {
out := new(ExecResponse)
err := c.cc.Invoke(ctx, "/runtime.v1alpha2.RuntimeService/Exec", in, out, opts...)
if err != nil {
return nil, err
}
return out, nil
}()
Ang Container Runtime ay responsable para sa pagpapatupad RuntimeServiceServer:
Mahabang listahan mula sa cri-api sa kubernetes/kubernetes
// RuntimeServiceServer is the server API for RuntimeService service.
type RuntimeServiceServer interface {
// Version returns the runtime name, runtime version, and runtime API version.
Version(context.Context, *VersionRequest) (*VersionResponse, error)
// RunPodSandbox creates and starts a pod-level sandbox. Runtimes must ensure
// the sandbox is in the ready state on success.
RunPodSandbox(context.Context, *RunPodSandboxRequest) (*RunPodSandboxResponse, error)
// StopPodSandbox stops any running process that is part of the sandbox and
// reclaims network resources (e.g., IP addresses) allocated to the sandbox.
// If there are any running containers in the sandbox, they must be forcibly
// terminated.
// This call is idempotent, and must not return an error if all relevant
// resources have already been reclaimed. kubelet will call StopPodSandbox
// at least once before calling RemovePodSandbox. It will also attempt to
// reclaim resources eagerly, as soon as a sandbox is not needed. Hence,
// multiple StopPodSandbox calls are expected.
StopPodSandbox(context.Context, *StopPodSandboxRequest) (*StopPodSandboxResponse, error)
// RemovePodSandbox removes the sandbox. If there are any running containers
// in the sandbox, they must be forcibly terminated and removed.
// This call is idempotent, and must not return an error if the sandbox has
// already been removed.
RemovePodSandbox(context.Context, *RemovePodSandboxRequest) (*RemovePodSandboxResponse, error)
// PodSandboxStatus returns the status of the PodSandbox. If the PodSandbox is not
// present, returns an error.
PodSandboxStatus(context.Context, *PodSandboxStatusRequest) (*PodSandboxStatusResponse, error)
// ListPodSandbox returns a list of PodSandboxes.
ListPodSandbox(context.Context, *ListPodSandboxRequest) (*ListPodSandboxResponse, error)
// CreateContainer creates a new container in specified PodSandbox
CreateContainer(context.Context, *CreateContainerRequest) (*CreateContainerResponse, error)
// StartContainer starts the container.
StartContainer(context.Context, *StartContainerRequest) (*StartContainerResponse, error)
// StopContainer stops a running container with a grace period (i.e., timeout).
// This call is idempotent, and must not return an error if the container has
// already been stopped.
// TODO: what must the runtime do after the grace period is reached?
StopContainer(context.Context, *StopContainerRequest) (*StopContainerResponse, error)
// RemoveContainer removes the container. If the container is running, the
// container must be forcibly removed.
// This call is idempotent, and must not return an error if the container has
// already been removed.
RemoveContainer(context.Context, *RemoveContainerRequest) (*RemoveContainerResponse, error)
// ListContainers lists all containers by filters.
ListContainers(context.Context, *ListContainersRequest) (*ListContainersResponse, error)
// ContainerStatus returns status of the container. If the container is not
// present, returns an error.
ContainerStatus(context.Context, *ContainerStatusRequest) (*ContainerStatusResponse, error)
// UpdateContainerResources updates ContainerConfig of the container.
UpdateContainerResources(context.Context, *UpdateContainerResourcesRequest) (*UpdateContainerResourcesResponse, error)
// ReopenContainerLog asks runtime to reopen the stdout/stderr log file
// for the container. This is often called after the log file has been
// rotated. If the container is not running, container runtime can choose
// to either create a new log file and return nil, or return an error.
// Once it returns error, new container log file MUST NOT be created.
ReopenContainerLog(context.Context, *ReopenContainerLogRequest) (*ReopenContainerLogResponse, error)
// ExecSync runs a command in a container synchronously.
ExecSync(context.Context, *ExecSyncRequest) (*ExecSyncResponse, error)
// Exec prepares a streaming endpoint to execute a command in the container.
Exec(context.Context, *ExecRequest) (*ExecResponse, error)
// Attach prepares a streaming endpoint to attach to a running container.
Attach(context.Context, *AttachRequest) (*AttachResponse, error)
// PortForward prepares a streaming endpoint to forward ports from a PodSandbox.
PortForward(context.Context, *PortForwardRequest) (*PortForwardResponse, error)
// ContainerStats returns stats of the container. If the container does not
// exist, the call returns an error.
ContainerStats(context.Context, *ContainerStatsRequest) (*ContainerStatsResponse, error)
// ListContainerStats returns stats of all running containers.
ListContainerStats(context.Context, *ListContainerStatsRequest) (*ListContainerStatsResponse, error)
// UpdateRuntimeConfig updates the runtime configuration based on the given request.
UpdateRuntimeConfig(context.Context, *UpdateRuntimeConfigRequest) (*UpdateRuntimeConfigResponse, error)
// Status returns the status of the runtime.
Status(context.Context, *StatusRequest) (*StatusResponse, error)
}
()
Kung gayon, dapat tayong makakita ng koneksyon sa pagitan ng kubelet at ng container runtime, tama ba? Suriin natin.
Patakbuhin ang command na ito bago at pagkatapos ng exec command at tingnan ang mga pagkakaiba. Sa aking kaso ang pagkakaiba ay:
// worker node
$ ss -a -p |grep kubelet
...
u_str ESTAB 0 0 * 157937 * 157387 users:(("kubelet",pid=5714,fd=33))
...Hmmm... Isang bagong koneksyon sa pamamagitan ng mga unix socket sa pagitan ng isang kubelet (pid=5714) at isang bagay na hindi kilala. Ano kaya yan? Tama, ito ay Docker (pid=1186)!
// worker node
$ ss -a -p |grep 157387
...
u_str ESTAB 0 0 * 157937 * 157387 users:(("kubelet",pid=5714,fd=33))
u_str ESTAB 0 0 /var/run/docker.sock 157387 * 157937 users:(("dockerd",pid=1186,fd=14))
...Tulad ng naaalala mo, ito ang proseso ng docker daemon (pid=1186) na nagsasagawa ng aming utos:
// worker node
$ ps -afx
...
1186 ? Ssl 0:55 /usr/bin/dockerd -H fd://
17784 ? Sl 0:00 _ docker-containerd-shim 53a0a08547b2f95986402d7f3b3e78702516244df049ba6c5aa012e81264aa3c /var/run/docker/libcontainerd/53a0a08547b2f95986402d7f3
17801 pts/2 Ss 0:00 _ sh
17827 pts/2 S+ 0:00 _ sleep 5000
...4. Aktibidad sa runtime ng container
Suriin natin ang CRI-O source code upang maunawaan kung ano ang nangyayari. Sa Docker ang lohika ay magkatulad.
Mayroong isang server na responsable para sa pagpapatupad RuntimeServiceServer:
// Server implements the RuntimeService and ImageService
type Server struct {
config libconfig.Config
seccompProfile *seccomp.Seccomp
stream StreamService
netPlugin ocicni.CNIPlugin
hostportManager hostport.HostPortManager
appArmorProfile string
hostIP string
bindAddress string
*lib.ContainerServer
monitorsChan chan struct{}
defaultIDMappings *idtools.IDMappings
systemContext *types.SystemContext // Never nil
updateLock sync.RWMutex
seccompEnabled bool
appArmorEnabled bool
}()
// Exec prepares a streaming endpoint to execute a command in the container.
func (s *Server) Exec(ctx context.Context, req *pb.ExecRequest) (resp *pb.ExecResponse, err error) {
const operation = "exec"
defer func() {
recordOperation(operation, time.Now())
recordError(operation, err)
}()
resp, err = s.getExec(req)
if err != nil {
return nil, fmt.Errorf("unable to prepare exec endpoint: %v", err)
}
return resp, nil
}()
Sa dulo ng chain, isinasagawa ng container runtime ang command sa worker node:
// ExecContainer prepares a streaming endpoint to execute a command in the container.
func (r *runtimeOCI) ExecContainer(c *Container, cmd []string, stdin io.Reader, stdout, stderr io.WriteCloser, tty bool, resize <-chan remotecommand.TerminalSize) error {
processFile, err := prepareProcessExec(c, cmd, tty)
if err != nil {
return err
}
defer os.RemoveAll(processFile.Name())
args := []string{rootFlag, r.root, "exec"}
args = append(args, "--process", processFile.Name(), c.ID())
execCmd := exec.Command(r.path, args...)
if v, found := os.LookupEnv("XDG_RUNTIME_DIR"); found {
execCmd.Env = append(execCmd.Env, fmt.Sprintf("XDG_RUNTIME_DIR=%s", v))
}
var cmdErr, copyError error
if tty {
cmdErr = ttyCmd(execCmd, stdin, stdout, resize)
} else {
if stdin != nil {
// Use an os.Pipe here as it returns true *os.File objects.
// This way, if you run 'kubectl exec <pod> -i bash' (no tty) and type 'exit',
// the call below to execCmd.Run() can unblock because its Stdin is the read half
// of the pipe.
r, w, err := os.Pipe()
if err != nil {
return err
}
go func() { _, copyError = pools.Copy(w, stdin) }()
execCmd.Stdin = r
}
if stdout != nil {
execCmd.Stdout = stdout
}
if stderr != nil {
execCmd.Stderr = stderr
}
cmdErr = execCmd.Run()
}
if copyError != nil {
return copyError
}
if exitErr, ok := cmdErr.(*exec.ExitError); ok {
return &utilexec.ExitErrorWrapper{ExitError: exitErr}
}
return cmdErr
}()
Sa wakas, ang kernel ay nagpapatupad ng mga utos:
Mga paalala
- Ang API Server ay maaari ding magpasimula ng koneksyon sa kubelet.
- Ang mga sumusunod na koneksyon ay nagpapatuloy hanggang sa matapos ang interactive na exec session:
- sa pagitan ng kubectl at api-server;
- sa pagitan ng api-server at kubectl;
- sa pagitan ng kubelet at ng container runtime.
- Ang Kubectl o api-server ay hindi maaaring magpatakbo ng anuman sa mga node ng manggagawa. Maaaring tumakbo ang Kubelet, ngunit nakikipag-ugnayan din ito sa runtime ng container para gawin ang mga bagay na iyon.
Mga Mapagkukunan
- Talakayan"" sa kubernetes-dev;
- Artikulo "";
- Talakayan"" sa Server Fault.
PS mula sa tagasalin
Basahin din sa aming blog:
- "Ano ang mangyayari sa Kubernetes kapag nagpapatakbo ka ng kubectl run?" ΠΈ ;
- Β«";
- Β«";
- Β«'.
Pinagmulan: www.habr.com