Layunin
Ito ay kinakailangan upang ayusin ang isang VPN Tunnel sa pagitan ng dalawang aparato, tulad ng Mikrotik at Juniper SRX na linya.
Ano ang mayroon tayo?
Mula sa Mikrotik, pumili kami ng isang modelo sa website ng Mikrotik wiki na maaaring suportahan ang IPSec hardware encryption; sa aming opinyon, ito ay naging medyo compact at mura, lalo na ang Mikrotik hEXS.
Ang USB Modem ay binili mula sa pinakamalapit na mobile operator; ang modelo ay Huawei E3370. Hindi kami nagsagawa ng anumang mga operasyon upang idiskonekta mula sa operator. Ang lahat ay pamantayan at tinahi mismo ng operator.
Ang core ay may Juniper SRX240H central router.
Anong nangyari
Posibleng magpatupad ng work scheme na nagbibigay-daan sa iyong lumikha ng koneksyon sa IPsec sa pamamagitan ng cellular operator, nang walang static na address, gamit ang modem, kung saan nakabalot ang GRE Tunnel.
Ang diagram ng koneksyon na ito ay ginagamit at gumagana sa Beeline at Megafon USB modem.
Ang pagsasaayos ay ang mga sumusunod:
Naka-install ang Juniper SRX240H sa core
Lokal na Address: 192.168.1.1/24
Panlabas na Address: 1.1.1.1/30
GW: 1.1.1.2
Malayong punto
Mikrotik hEX S
Lokal na Address: 192.168.152.1/24
Panlabas na Address: Dynamic
Isang maliit na diagram upang matulungan kang maunawaan kung paano ito gumagana:
Konfigurasyon ng Juniper SRX240:
Paglabas ng Software ng JUNOS [12.1X46-D82]
Configuration ng Juniper
interfaces {
ge-0/0/0 {
description Internet-1;
unit 0 {
family inet {
address 1.1.1.1/30;
}
}
}
gr-0/0/0 {
unit 1 {
description GRE-Tunnel;
tunnel {
source 172.31.152.2;
destination 172.31.152.1;
}
family inet;
vlan {
unit 0 {
family inet {
address 192.168.1.1/24;
}
}
st0 {
unit 5 {
description "Area - 192.168.152.0/24";
family inet {
mtu 1400;
}
}
routing-options {
static {
route 0.0.0.0/0 next-hop 1.1.1.2;
route 192.168.152.0/24 next-hop gr-0/0/0.1;
route 172.31.152.0/30 next-hop st0.5;
}
router-id 192.168.1.1;
}
security {
ike {
traceoptions {
file vpn.log size 256k files 5;
flag all;
}
policy ike-gretunnel {
mode aggressive;
description area-192.168.152.0;
proposal-set standard;
pre-shared-key ascii-text "mysecret"; ## SECRET-DATA
}
gateway gw-gretunnel {
ike-policy ike-gretunnel;
dynamic inet 172.31.152.1;
external-interface ge-0/0/0.0;
version v2-only;
}
ipsec {
}
policy vpn-policy0 {
perfect-forward-secrecy {
keys group2;
}
proposal-set standard;
}
vpn vpn-gretunnel {
bind-interface st0.5;
df-bit copy;
vpn-monitor {
optimized;
source-interface st0.5;
destination-ip 172.31.152.1;
}
ike {
gateway gw-gretunnel;
no-anti-replay;
ipsec-policy vpn-policy0;
install-interval 10;
}
establish-tunnels immediately;
}
}
policies {
from-zone vpn to-zone vpn {
policy st-vpn-vpn {
match {
source-address any;
destination-address any;
application any;
}
then {
permit;
log {
session-init;
session-close;
}
count;
}
}
}
from-zone trust to-zone vpn {
policy st-trust-to-vpn {
match {
source-address any;
destination-address any;
application any;
}
then {
permit;
log {
session-init;
session-close;
}
count;
}
}
}
from-zone vpn to-zone trust {
policy st-vpn-to-trust {
match {
source-address any;
destination-address any;
application any;
}
then {
permit;
log {
session-init;
session-close;
}
count;
}
}
}
zones {
security-zone trust {
vlan.0 {
host-inbound-traffic {
system-services {
all;
}
protocols {
all;
}
}
}
security-zone vpn {
interfaces {
st0.5 {
host-inbound-traffic {
protocols {
ospf;
}
}
}
gr-0/0/0.1 {
host-inbound-traffic {
system-services {
all;
}
protocols {
all;
}
}
}
security-zone untrust {
interfaces {
ge-0/0/0.0 {
host-inbound-traffic {
system-services {
ping;
ssh;
ike;
}
}
}
}
}
vlans {
vlan-local {
vlan-id 5;
l3-interface vlan.1;
}Konfigurasyon ng Mikrotik hEX S:
Bersyon ng software ng RouterOS [6.44.3]
pagsasaayos ng Mikrotik
/ip address
add address=172.31.152.1/24 comment=GRE-Tunnel interface=gre-srx network=172.31.152.0
add address=192.168.152.1/24 comment=Local-Area interface=bridge network=192.168.152.0
/interface gre
add comment=GRE-Tunnel-SRX-HQ !keepalive local-address=172.31.152.1 name=gre-srx remote-address=172.31.152.2
/ip ipsec policy group
add name=srx-gre
/ip ipsec profile
add dh-group=modp1024 dpd-interval=10s name=profile1
/ip ipsec peer
add address=1.1.1.1/32 comment=GRE-SRX exchange-mode=aggressive local-address=172.31.152.1 name=peer2 profile=profile1
/ip ipsec proposal
set [ find default=yes ] enc-algorithms=aes-256-cbc,aes-128-cbc,3des
add enc-algorithms=aes-128-cbc,3des name=proposal1
/ip route
add distance=10 dst-address=192.168.0.0/16 gateway=gre-srx
/ip ipsec identity
add comment=IPSec-GRE my-id=address:172.31.152.1 peer=peer2 policy-template-group=srx-gre secret=mysecret
/ip ipsec policy
set 0 disabled=yes
add dst-address=0.0.0.0/0 proposal=proposal1 sa-dst-address=1.1.1.1 sa-src-address=172.31.152.1 src-address=172.31.152.0/30 tunnel=yes
/ip address
add address=172.31.152.1/24 comment=GRE-Tunnel interface=gre-srx network=172.31.152.0
add address=192.168.152.1/24 comment=Local-Area interface=bridge network=192.168.152.0
Resulta:
Mula sa gilid ng Juniper SRX
netscreen@srx240> ping 192.168.152.1
PING 192.168.152.1 (192.168.152.1): 56 data bytes
64 bytes from 192.168.152.1: icmp_seq=0 ttl=64 time=29.290 ms
64 bytes from 192.168.152.1: icmp_seq=1 ttl=64 time=28.126 ms
64 bytes from 192.168.152.1: icmp_seq=2 ttl=64 time=26.775 ms
64 bytes from 192.168.152.1: icmp_seq=3 ttl=64 time=25.401 ms
^C
--- 192.168.152.1 ping statistics ---
4 packets transmitted, 4 packets received, 0% packet loss
round-trip min/avg/max/stddev = 25.401/27.398/29.290/1.457 msMula sa Mikrotik
net[admin@GW-LTE-] > ping 192.168.1.1
SEQ HOST SIZE TTL TIME STATUS
0 192.168.1.1 56 64 34ms
1 192.168.1.1 56 64 40ms
2 192.168.1.1 56 64 37ms
3 192.168.1.1 56 64 40ms
4 192.168.1.1 56 64 51ms
sent=5 received=5 packet-loss=0% min-rtt=34ms avg-rtt=40ms max-rtt=51ms Natuklasan
Pagkatapos ng trabaho, nakatanggap kami ng isang matatag na VPN Tunnel, mula sa malayong network ay maa-access namin ang buong network na matatagpuan sa likod ng juniper, at, nang naaayon, pabalik.
Hindi ko inirerekumenda ang paggamit ng IKE2 sa pamamaraang ito; lumitaw ang isang sitwasyon na pagkatapos ng pag-reboot ng isang partikular na aparato, ang IPSec ay hindi tumaas.
Pinagmulan: www.habr.com