🥇Isiteshi sokusebenzela se-Cryptographic esisekelwe kumazinga okhiye basesidlangalaleni benkundla ye-Android

Isikhathi sokukhombisa ukuthi i-cryptographic workstation esekelwe kumazinga okhiye womphakathi cryptoarmpkcs isebenza kwenye yezingxenyekazi zeselula, okuyi-Android.

Umqondo owabekwa phansi ngenkathi kuthuthukiswa insiza ye-cryptoarmpkcs ukuthi umsebenzisi kufanele ahlangabezane nobunzima obuncane lapho edala futhi eqinisekisa isiginesha ye-elekthronikhi. Yingakho siphakamisa ukusebenzisa amathokheni e-cryptographic njengenkampani yenethiwekhi eyinhloko yesitifiketi somuntu siqu I-PKCS#11 kanye/noma iziqukathi ezivikelekile I-PKCS#12. Kumelwe kushiwo ukuthi ukusetshenziswa kwe-PKCS#12 ezimweni eziningi kuvela cishe ukuphela okwenzekayo, isibonelo, lapho amathokheni afanayo e-PKCS#11 engenakho ukusekelwa kwamapulatifomu athile. Ngakho-ke sinqume ukuqala ukuthumela insiza ye-cryptoarmpkcs kuplathifomu ye-Android ngokusekelwa kweziqukathi ezivikelekile ze-PKCS#12.

Masiqaphele ngokushesha ukuthi njengoba iphrojekthi yenziwe endaweni yesikhulumi se-C ne-Tcl/Tk, ukuthuthwa akuzange kubangele ubunzima obubalulekile. Lokhu kwenzeke ngenxa yobuchwepheshe I-Androwish. Ngokuvula kanye ukuhlela imvelo Azikho izinkinga (indawo engisebenza kuyo yi-Linux - Mageia-7.0). Ngizonikeza iskripthi esisodwa kuphela sokuphakela Amathuluzi Olayini Womyalo we-Android (sdk-tools-linux-xxxx.zip):

#!/bin/sh
if [ $# -ne 1   ]
    then 
	echo "./InstallAndroidSDK.sh <sdk-tools-linux-xxxxxxxx.zip>"
	echo "Не указан архив или число параметров больше 1"
	exit 1
fi
if [ ! -f $1 ]
    then 
	echo "./InstallAndroidSDK.sh <sdk-tools-linux-xxxxxxxx.zip>"
	echo "архив $1 отсутствует"
	exit 1
fi
#Распаковываем SDK-TOOLS в папку tools
#unzip sdk-tools-linux-4333796.zip
unzip $1
#Создаем папку android-sdk-linux
mkdir android-sdk-linux
#Перемещвем папку tools в android-sdk-linux
mv tools android-sdk-linux
cd android-sdk-linux/tools/bin
./sdkmanager "platform-tools" "platforms;android-29"

Into ephawulekayo kakhulu ukuthi imvelo ye-Androwish ihlanganisa otolika ababili, i-undrowish-xxx ne-vanillawish-xxx, efana ngokuphelele ekubunjweni kwe-"balalaikas" (amaphakheji) afakwe ku-Androwish ngokwayo. Umehluko phakathi kwe-undrowish ne-vanillawish ukuthi i-vanillawish ine-SDL/AGG/freetype esekelwe emuva:

Ukuba khona kwalezi zinsiza ezimbili kukuvumela ukuthi uthuthukise uhlelo lokusebenza ngaphandle kokusebenzisa i-Android ngokwayo kanye ne-emulator yayo enokulinganisa okuphezulu kudivayisi yangempela. Okokuqala, lokhu, yiqiniso, i-androidwish-xxx.

Iphakheji langempela langokwezifiso le-Android lakhiwe endaweni ye-AWSDK. Isihlahla sakho sephrojekthi kufanele sithuthelwe kufolda ethi ~/AWSDK/assets/app. Kulesi simo, imojula eyinhloko yephrojekthi yakho kufanele iqanjwe kabusha ku-main.tcl. Uma usebenzisa i-balalaikas eyengeziwe enamalabhulali aguqukayo, khona-ke amalabhulali kufanele abekwe kumafolda ~/AWSDK/libs/x86 okokulingisa kanye ~/AWSDK/libs/armeabi kudivayisi yangempela.

Ngemva kwalokhu, vele ugijime umyalo:

$wish ~/AWSDK/tools/bones

futhi ulandele imiyalelo yakhe:

Iphakheji ye-apk ehlanganisiwe izotholakala kufolda ethi ~/AWSDK/build/outputs/apk.

Uma unedivayisi yangempela noma i-emulator exhunyiwe, iphakheji ingafakwa ngokushesha.
Kulokhu, idivayisi yangempela kufanele ibe kumodi yokususa iphutha.

Kodwa ake sibuyele kuhlelo lokusebenza ngokwalo. Yini okwakudingeka ishintshwe kuwo?

Ngokwemvelo, izinguquko zihlobene ngokuyinhloko nosayizi wesikrini. Kwadingeka ngihlele kabusha okuyinhloko (iwindi lokuqala). Ngenxa yalokho, esikhundleni sewindi elilodwa kukhompuyutha evamile:

Amawindi amathathu avele ku-Android:

Iwindi lokuqala linolwazi. Ngokujwayelekile, ihlukaniswe yaba izingxenye eziningana. Ingxenye yokuqala, etholakala phezulu, iqukethe igama lensiza kanye nelogo yayo.

Okulandelayo kuza ilogo yomkhiqizi, ishidi lolwazi kanye nezinkinobho ezintathu eziqedela ikhasi.
Ikhasi libhalwa kusetshenziswa ingxenye yekhanvasi. Ikhasi lisebenzisa izinhlobo ezimbili zezinkinobho: eyodwa isesimweni sikanxande oguquguqukayo (ophakathi nendawo), kanti enye emibili isesimweni sikanxande onamakhona ayindilinga. I-balalaika yayisetshenziselwa ukudala izinkinobho ezinamakhona ayindilinga tkpath. Ngokwami, le balalaika yangithinta kahle kakhulu. Ngokwemvelo, lapho usebenza ngendwangu, i-geometry ithatha ingxenye yengonyama yekhodi. Ngezansi iskripthi create_titul_page.tcl sokudala ikhasi lokuqala lohlelo lokusebenza. Noma ubani angayihlela ukuze ihambisane nombono wakhe.

Iskriphthi create_titul_page.tcl

package require Tk
package require tkpath 0.3.0
global mydir
set mydir [file dirname [info script]]
#Грузим картинки
#Логотип продукта
image create photo logo_product -file [file join $mydir "imageme" "validcertkey_51x24.png"] 
#Логотип производителя
image create photo logo_orel -file [file join $mydir "imageme" "я_орел_425x200.png"] -format "png -alpha 1.0"
#Андроида с tcl/tk
image create photo logo_and -file [file join $mydir "imageme" "AndTk_inv_147x173.png"] -format "png -alpha 1.0"
#Свиток опечатанный
image create photo svitok -file [file join $mydir "imageme" "blue_svitok.png"] -format "png -alpha 1.0"
#Плитка
image create photo tileand -file [file join $mydir "imageme" "tile_green_and_32x32.png"] -format "png -alpha 1.0"
#Увеличить/уменьшить (отрицательное значение - уменьшение)
proc scaleImage {im xfactor {yfactor 0}} {
set mode -subsample
if {$xfactor>=0 && $yfactor>=0} {
set mode -zoom
} else {
set xfactor [expr $xfactor * -1]
}
if {$yfactor == 0} {set yfactor $xfactor}
set t [image create photo]
$t copy $im
$im blank
$im copy $t -shrink $mode $xfactor $yfactor
image delete $t
}
proc createtile {w  backg} {
image create photo tiled
tiled copy $backg -to 0 0 $::scrwidth $::scrheight -shrink
$backg copy tiled
image delete tiled
# Мостим холст
$w create image 0 0  
-image $backg  
-anchor nw
}
proc create_rectangle  {canv img x1 y1 x2 y2 color alfa {wbd 0} {colorline black} } {
image create photo $img -format "default -colorformat  rgb"
set rgb1 [winfo rgb $canv $color]
set cr  [lindex $rgb1 0]
set cg  [lindex $rgb1 1]
set cb  [lindex $rgb1 2]
set fill [format "#%04x%04x%04x" $cr $cg $cb ]
#Создаем цветной праямоугольник
$img put $fill -to 0 0 [expr {$x2 - $x1}] [expr {$y2 -$y1}]
#Сохраняем картинку
set dimg [$img data -format png]
#Создаем image с учетом alpha канала
image create photo $img -data $dimg -format "png -alpha $alfa"
#    $img put [list $rgb1] -to 0 0 [expr {$x2 - $x1}] [expr {$y2 -$y1}]
#Отображаем цветной прямоугольник
set imgr [$canv create image $x1 $y1 -image $img -anchor nw] 
set cc [subst {butImg $img}]
$canv bind $imgr <ButtonPress-1> $cc
#Оконтовка вокруг цветного прямоугольника
if {$wbd > 0 } {
set item [$canv create rect $x1 $y1 $x2 $y2 -outline $colorline -width $wbd ]
$canv bind $item <ButtonPress-1> $cc
}
return $imgr
}
proc butImg {img} {
tk_messageBox -title "Кнопка" -icon info -message "Нажали кнопку=$img" -detail "::screenwidth=$::scrwidthn::screenheight=$::scrheight" -parent .
if {$img == "exit"} {
set answer [tk_dialog .dialog2 "Конец работы" "Вы действительноnхотите выйти?" question 0 "Да" "Нет" ]
if {$answer == 0} {
exit
}	
}
}
proc page_titul {fr  logo_manufacturer} {
global mydir
#Создаем холст на весь экран
tkp::canvas $fr.can -borderwidth 0 -height [winfo screenheight .] -width [winfo screenwidth .] -relief flat
#Мостим холст плиткой 
createtile "$fr.can"  "tileand"
pack $fr.can  -anchor center -expand 1 -fill both -side top  -padx 0 -pady 0
#Вычисляем координаты для логотипа производителя
#update чтобы обновилась информация в БД об окнах
update
#    set aa [winfo height $fr.labtitul]
set aa $::padly
#Центрируем логотип разработчика
set ha [image width $logo_manufacturer]
set xman [expr {($::scrwidth - $ha) / 2 }]
$fr.can create image $xman $aa -image $logo_manufacturer -anchor nw -tag tag_logo
set blogo [$fr.can bbox tag_logo]
set wexit [lindex $blogo 3]
if {$::typetlf } {
set dlx [expr {$::padlx / 1}]
$fr.can create text [expr $dlx + 6] [expr {$wexit + $::padly + 6}] -anchor nw -text "Электронная подпись" -fill black -font {{Roboto Condensed Medium} 15 }
$fr.can create text $dlx [expr {$wexit + $::padly}] -anchor nw -text "Электронная подпись" -fill white -font {{Roboto Condensed Medium} 15 } -tag id_text0
update
set blogo [$fr.can bbox id_text0]
set wexit [lindex $blogo 3]
$fr.can create text [expr $dlx + 4] [expr {$wexit + $::padly + 4 - 80}] -anchor nw -text "для платформы Android" -fill black -font {{Roboto Condensed Medium} 13}
$fr.can create text $dlx [expr {$wexit + $::padly - 80}] -anchor nw -text "для платформы Android" -fill white -font {{Roboto Condensed Medium} 13} -tag id_text1
set blogo [$fr.can bbox id_text1]
set wexit [lindex $blogo 3]
$fr.can create text [expr $dlx + 3] [expr {$wexit + $::padly + 3 - 50}] -anchor nw -text "№ 63 ФЗ "Об электроннойnподписи от 6 апреля 2011 года"" -fill black -font {{Roboto} 10}
$fr.can create text $dlx [expr {$wexit + $::padly - 50}] -anchor nw -text "№ 63 ФЗ "Об электроннойnподписи от 6 апреля 2011 года"" -fill white -font {{Roboto} 10} -tag id_text2
set blogo [$fr.can bbox id_text2]
set wexit [lindex $blogo 3]
$fr.can create text [expr $dlx + 2] [expr {$wexit + $::padly + 2 - 40}] -text "Авторы: В.Н. Орловnhttp://soft.lissi.ru, http://www.lissi.run+7(495)589-99-53ne-mail: [email protected]" 
-anchor nw -fill black  -font {{Roboto} 9}
$fr.can create text $dlx [expr {$wexit + $::padly - 40}] -text "Авторы: В.Н. Орловnhttp://soft.lissi.ru, http://www.lissi.run+7(495)589-99-53ne-mail: [email protected]" 
-anchor nw -fill white -tag id_text3  -font {{Roboto} 9}
} else {
$fr.can create text [expr $::padlx + 2] [expr {$wexit + $::padly + 2}] -anchor nw -text "Электронная подпись" -fill black -font {{Nimbus Sans Narrow} 20}
$fr.can create text $::padlx [expr {$wexit + $::padly}] -anchor nw -text "Электронная подпись" -fill white -font {{Nimbus Sans Narrow} 20} -tag id_text0
set blogo [$fr.can bbox id_text0]
set wexit [lindex $blogo 3]
$fr.can create text [expr $::padlx + 2] [expr {$wexit + $::padly + 2 - 20}] -anchor nw -text "для платформы Android" -fill black -font {{Nimbus Sans Narrow} 18}
$fr.can create text $::padlx [expr {$wexit + $::padly - 20}] -anchor nw -text "для платформы Android" -fill white -font {{Nimbus Sans Narrow} 18} -tag id_text1
set blogo [$fr.can bbox id_text1]
set wexit [lindex $blogo 3]
$fr.can create text [expr $::padlx + 2] [expr {$wexit + $::padly + 2}] -anchor nw -text "№ 63 ФЗ "Об электроннойnподписи от 6 апреля 2011 года"" -fill black -font {{Nimbus Sans Narrow} 14}
$fr.can create text $::padlx [expr {$wexit + $::padly}] -anchor nw -text "№ 63 ФЗ "Об электроннойnподписи от 6 апреля 2011 года"" -fill white -font {{Nimbus Sans Narrow} 14} -tag id_text2
set blogo [$fr.can bbox id_text2]
set wexit [lindex $blogo 3]
$fr.can create text [expr $::padlx + 1] [expr {$wexit + $::padly + 1}] -text "Авторы: В.Н. Орловnhttp://soft.lissi.ru, http://www.lissi.run+7(495)589-99-53ne-mail: [email protected]" 
-anchor nw -fill black  -font {{Nimbus Sans Narrow} 12}
$fr.can create text $::padlx [expr {$wexit + $::padly}] -text "Авторы: В.Н. Орловnhttp://soft.lissi.ru, http://www.lissi.run+7(495)589-99-53ne-mail: [email protected]" 
-anchor nw -fill white -tag id_text3  -font {{Nimbus Sans Narrow} 12} -tag id_text3
set blogo [$fr.can bbox id_text2]
}
set blogo [$fr.can bbox id_text3]
set wland [lindex $blogo 3]
$fr.can create image $::padlx $wland -image logo_and -anchor nw -tag tag_land
set ha [image height logo_and]
set wa [image width logo_and]
set ha1 [expr {$ha - ($ha / 2 ) }]
$fr.can create image [expr {$wa - 80 }] [expr {$wland + $ha1}] -image svitok -anchor nw -tag tag_land
if {$::typetlf} {
set x1 [expr {$::padlx / 2}]
set y1 [expr {$wland + 120}]
set x2 [expr {$::::scrwidth - $x1}]
set y2 [expr {$y1 + 120}]
set wd 8
set rr 18
} else {
set x1 [expr {$::padlx / 2}]
set y1 [expr {$wland + 40}]
set x2 [expr {$::::scrwidth - $x1}]
set y2 [expr {$y1 + 40}]
set wd 4
set rr 6
}
set g5 [$fr.can gradient create linear -stops {{0 lightgreen} {1 green}}] 
set S3 [$fr.can style create -stroke "skyblue" -fill  $g5 -strokewidth $wd  -fillopacity 0.6]
set im1 [$fr.can create prect $x1 $y1 $x2 $y2 -rx $rr -style $S3]
$fr.can bind $im1 <ButtonPress-1> {butImg "img1"}
#Печатаем техт
set blogo [$fr.can bbox $im1]
set by2 [lindex $blogo 3]
set by1 [lindex $blogo 1]
set bb [expr {($by2 - $by1) / 2}]
set bx2 [lindex $blogo 2]
set bx1 [lindex $blogo 0]
set bbx [expr {($bx2 - $bx1) / 2}]
set txt1 [$fr.can create text [expr {$x1 + $::padlx * 2}] [expr {$y1 + 1 }] -anchor nw -text "Сайт разработчика" -fill black -font {{Arial} 10 normal}] 
#Центрируем техт
set btxt1 [$fr.can bbox $txt1]
#Смещение по оси Y
set ty2 [lindex $btxt1 3]
set ty1 [lindex $btxt1 1]
set tt [expr {$ty2 - $ty1}]
set tt [expr {$tt / 2}]
set offsy [expr {($by1 + $bb) - ($ty1 + $tt)}]
#Смещение по оси X
set tx2 [lindex $btxt1 2]
set tx1 [lindex $btxt1 0]
set ttx [expr {$tx2 - $tx1}]
set ttx [expr {$ttx / 2}]
set offsx [expr {($bx1 + $bbx) - ($tx1 + $ttx)}]
$fr.can move $txt1 $offsx $offsy
$fr.can bind $txt1 <ButtonPress-1> {butImg "img1"}
if {$::typetlf} {
set y1 [expr $y2 + 40]
set x2 [expr {$::::scrwidth - $x1}]
set y2 [expr {$y1 + 120}]
} else {
set y1 [expr {$y1 + 60}]
set x2 [expr {$::::scrwidth - $x1}]
set y2 [expr {$y1 + 40}]
}
set im1 [create_rectangle $fr.can "but2" $x1 $y1 $x2 $y2 "#2b972d" 0.6 $wd "skyblue"]
#Печатаем техт
set blogo [$fr.can bbox $im1]
set by2 [lindex $blogo 3]
set by1 [lindex $blogo 1]
set bb [expr {($by2 - $by1) / 2}]
set bx2 [lindex $blogo 2]
set bx1 [lindex $blogo 0]
set bbx [expr {($bx2 - $bx1) / 2}]
set txt1 [$fr.can create text [expr {$x1 + $::padlx * 2}] [expr {$y1 + 1 }] -anchor nw -text "Переход в основное меню" -fill black -font {{Roboto Condensed Medium} 12}] 
#Центрируем текст
set btxt1 [$fr.can bbox $txt1]
#Смещение по оси Y
set ty2 [lindex $btxt1 3]
set ty1 [lindex $btxt1 1]
set tt [expr {$ty2 - $ty1}]
set tt [expr {$tt / 2}]
set offsy [expr {($by1 + $bb) - ($ty1 + $tt)}]
#Смещение по оси X
set tx2 [lindex $btxt1 2]
set tx1 [lindex $btxt1 0]
set ttx [expr {$tx2 - $tx1}]
set ttx [expr {$ttx / 2}]
set offsx [expr {($bx1 + $bbx) - ($tx1 + $ttx)}]
$fr.can move $txt1 $offsx $offsy
$fr.can bind $txt1 <ButtonPress-1> {butImg "but2"}
if {$::typetlf} {
set x1 [expr {$::padlx / 2}]
set y1 [expr $y2 + 40]
set x2 [expr {$::::scrwidth - $x1}]
set y2 [expr {$y1 + 120}]
} else {
set x1 [expr {$::padlx / 2}]
set y1 [expr {$y1 + 60}]
set x2 [expr {$::::scrwidth - $x1}]
set y2 [expr {$y1 + 40}]
}
set S3 [$fr.can style create -stroke skyblue -fill  $g5 -strokewidth $wd  -fillopacity 0.6]
set im1 [$fr.can create prect $x1 $y1 $x2 $y2 -rx $rr -style $S3]
set blogo [$fr.can bbox $im1]
$fr.can bind $im1 <ButtonPress-1> {butImg "exit"}
set by2 [lindex $blogo 3]
set by1 [lindex $blogo 1]
set bb [expr {($by2 - $by1) / 2}]
set bx2 [lindex $blogo 2]
set bx1 [lindex $blogo 0]
set bbx [expr {($bx2 - $bx1) / 2}]
set txt1 [$fr.can create text [expr {$x1 + $::padlx * 2}] [expr {$y1 + 1 }] -anchor nw -text "Конец работы" -fill black  -font {Arial 10 normal}]
$fr.can bind $txt1 <ButtonPress-1> {butImg "exit"}
set btxt1 [$fr.can bbox $txt1]
#Смещение по оси Y
set ty2 [lindex $btxt1 3]
set ty1 [lindex $btxt1 1]
set tt [expr {$ty2 - $ty1}]
set tt [expr {$tt / 2}]
set offsy [expr {($by1 + $bb) - ($ty1 + $tt)}]
#Смещение по оси X
set tx2 [lindex $btxt1 2]
set tx1 [lindex $btxt1 0]
set ttx [expr {$tx2 - $tx1}]
set ttx [expr {$ttx / 2}]
set offsx [expr {($bx1 + $bbx) - ($tx1 + $ttx)}]
$fr.can move $txt1 $offsx $offsy
}
#Собственно скрипт
#Считываем размеры экрана
set ::scrwidth [winfo screenwidth .]
set ::scrheight [winfo screenheight .]
set ::typetlf 0
#Проверяем, что это телефон
if {$::scrwidth < $::scrheight} {
set ::typetlf 1
}
set ::padls 20
set ::padlx 15
set ::padly 15
if {$::typetlf} {
wm attributes . -fullscreen 1
scaleImage icon_openfile_18x16 3
scaleImage ::img::view_18x16 3
#Логотип производителя
scaleImage logo_orel 2
#Логотип продуктв
scaleImage logo_product 2
#Андроида tcl/tk
scaleImage logo_and 3
#Свиток опечатанный
scaleImage svitok 4
set ::padls 50
set ::padlx 75
set ::padly 50
} else {
#Конфигурирование виджета под смартфон
scaleImage logo_orel -2
set ::scrwidth 370
set ::scrheight 700
wm minsize . $::scrwidth $::scrheight
set geometr $::scrwidth
append geometr "x"
append geometr $::scrheight
append geometr "+0+0"
wm geometry . $geometr
}
#Создаем название продукта
set name_product "CryptoArmPKCS-A" 
label .labtitul -image logo_product -compound left -fg snow -text $name_product -font {Arial 10 bold} -anchor w  -width [winfo screenwidth .] -pady $::padls -padx 10 -bg #222222 
pack .labtitul -anchor nw -expand 0 -fill x -side top  -padx 1 -pady 0
#Создаем стартовую страницу
set i 0
ttk::frame .fr$i -pad 0 -padding 0
page_titul ".fr$i"  "logo_orel"
pack .fr$i -side top -anchor center -expand 1 -fill both -side top  -padx 0 -pady 0 
update

Ukuze usebenzise lesi script, sebenzisa enye yezinsiza ze-undroidwish noma ze-vanillawish:

$ /usr/local/bin64/undroidwish-e5dc71ed9d-linux64   create_titul_page.tcl

noma

$/usr/local/bin64/vanillawish-e5dc71ed9d-linux64  create_titul_page.tcl

Umphumela uboniswa kusithombe-skrini sokuqala.

Ikhasi lesibili libala imisebenzi esekelwa insiza ye-cryptoarmpkcs-A. Umugqa ngamunye uyinkinobho, uma uchofozwa, kuzovezwa ikhasi elisebenzayo. I-geometry yokubeka inkinobho kuleli khasi inqunywa ifonti esetshenzisiwe. Ngezansi kuneskripthi se-creative_page_functions.tcl sokudala ikhasi lesibili/elisebenzayo lohlelo lokusebenza. Noma ubani angakwazi futhi ukuyihlela ukuze ihambisane nemisebenzi yabo.

Iskriphthi create_page_functions.tcl

package require Tk
package require tkpath 0.3.0
global mydir
set mydir [file dirname [info script]]
#Увеличить/уменьшить (отрицательное значение - уменьшение)
proc scaleImage {im xfactor {yfactor 0}} {
set mode -subsample
if {$xfactor>=0 && $yfactor>=0} {
set mode -zoom
} else {
set xfactor [expr $xfactor * -1]
}
if {$yfactor == 0} {set yfactor $xfactor}
set t [image create photo]
$t copy $im
$im blank
$im copy $t -shrink $mode $xfactor $yfactor
image delete $t
}
proc createtile {w  backg} {
image create photo tiled
tiled copy $backg -to 0 0 $::scrwidth $::scrheight -shrink
$backg copy tiled
image delete tiled
# Мостим холст
$w create image 0 0  
-image $backg  
-anchor nw
}
proc butCliked {num fr} {
pack forget  .fr1
set ::tekFrfunc $fr
pack $fr -side top -anchor center -expand 1 -fill both -side top  -padx 0 -pady 0 
tk_dialog .dialog1 "Dear user:" "Button $num was clickednFr=$fr" info 0 OK 
}
proc butImg {img} {
tk_messageBox -title "Кнопка" -icon info -message "Нажали кнопку=$img" -detail "::screenwidth=$::scrwidthn::screenheight=$::scrheight" -parent .
if {$img == "exit"} {
set answer [tk_dialog .dialog2 "Конец работы" "Вы действительноnхотите выйти?" question 0 "Да" "Нет" ]
if {$answer == 0} {
exit
}	
}
}
proc butReturn {} {
pack forget  $::tekFrfunc
pack .fr1 -side top -anchor center -expand 1 -fill both -side top  -padx 0 -pady 0 
#    tk_dialog .dialog1 "Dear user:" "Button $num was clickednFr=$fr" info 0 OK 
}
proc page_func {fr tile titul functions} {
#Кнопки  меню
upvar $functions but
#Создаем шрифт для кнопок
if {$::typetlf} {
set feFONT_button "-family {Roboto} -size 9 -weight bold -slant roman"
set widl 10
} else {
set feFONT_button "-family {Arial} -size 12 -weight bold -slant roman"
set widl 5
}
catch {font delete fontTEMP_drawer}
eval font create fontTEMP_drawer  $feFONT_button
#Вычисляем максимальныю длину текста
set drawerCNT 0
set strMaxWidthPx 15
set Ndrawers [expr {[array size but] - 1}]
while { $drawerCNT <= $Ndrawers } {
set strWidthPx [font measure fontTEMP_drawer "$but($drawerCNT)"]
if { $strWidthPx > $strMaxWidthPx } {
set strMaxWidthPx $strWidthPx
}
incr drawerCNT
}
set drawerWidthPx [expr $strMaxWidthPx + 10]
set xxx [expr {($::::scrwidth - $drawerWidthPx) / 2}]
if {$fr != ".fr1"} {
set hret [expr $::scrheight / 4]
} else {
set hret $::scrheight
}
set hret [expr $::scrheight / 4]
tkp::canvas $fr.can -borderwidth 0 -height $hret -width $::scrwidth -relief flat
#Мостим холст плиткой 
createtile "$fr.can"  $tile
pack $fr.can  -anchor center -expand 1 -fill both -side top  -padx 0 -pady 0
if {$titul != "" } {
set allfunc $titul
catch {font delete fontTEMP_titul}
set font_titul "-family {Roboto Condensed Medium} -size 15"
eval font create fontTEMP_titul  $font_titul
set funcWidthPx [font measure fontTEMP_titul "$allfunc"]
set dlx [expr {($::::scrwidth - $funcWidthPx) / 2}]
$fr.can create text [expr $dlx + 6] [expr {6 + 6}] -anchor nw -text "$allfunc" -fill black -font fontTEMP_titul
$fr.can create text $dlx 6 -anchor nw -text "$allfunc" -fill white -font fontTEMP_titul -tag id_text0
set blogo [$fr.can bbox id_text0]
set boxbut [expr ([lindex $blogo 3] + 6 + 6)]
} else {
set boxbut [expr 6 + 6]
}
#Вычисляем самый широкий текст у кнопок
#См. выше
#Размещаем кнопки
set BDwidth_canvas 0
set maxTextHeightPx [font metrics fontTEMP_drawer -linespace] 
set maxTextHeightPx [expr {$maxTextHeightPx + ( $maxTextHeightPx / 2)}]
set drawerHeightPx $maxTextHeightPx
set xLocTextPx [expr {($::::scrwidth - $drawerWidthPx) / 2}]
set yLocTextPx [expr $BDwidth_canvas + ($drawerHeightPx / 2) + $boxbut]
set canvasHeightPx [expr $Ndrawers * $drawerHeightPx]
set drawerCNT 0
set Ndrawers [expr {[array size but] - 1}]
while { $drawerCNT <= $Ndrawers } {
set yLineLocPx [ expr (( $drawerCNT ) * $drawerHeightPx + $boxbut)]
#Линия перед текстом
$fr.can create line 
$xLocTextPx $yLineLocPx 
[expr $drawerWidthPx + $xLocTextPx] $yLineLocPx 
-fill "#a0a0a0" -width $widl
$fr.can create text [expr $xLocTextPx + 5] $yLocTextPx 
-anchor w 
-font fontTEMP_drawer 
-text "$but($drawerCNT)" 
-tag textlineTag($drawerCNT)
if {$drawerCNT == 0} {
if {$fr == ".fr1"} {
$fr.can bind textlineTag($drawerCNT)  <ButtonRelease-1>   {butImg "but1"}
} else {
$fr.can bind textlineTag($drawerCNT)  <ButtonRelease-1>   {butReturn}
}
} else {
frame .fn$drawerCNT -background white -relief flat -pady 0 -padx 0
set titul $but($drawerCNT)
set cmd "$fr.can bind textlineTag($drawerCNT)  <ButtonRelease-1>   {butCliked $drawerCNT .fn$drawerCNT}"
set cmd [subst "$cmd"]
eval $cmd 
set but1(0) "Возврат в основное меню"
page_func ".fn$drawerCNT" voda "$titul" "but1"
}
incr drawerCNT
set yLocTextPx [ expr $yLocTextPx + $drawerHeightPx]
#Завершаюшая линия
if { $drawerCNT > $Ndrawers } {
set yLineLocPx [ expr (( $drawerCNT ) * $drawerHeightPx + $boxbut)]
$fr.can create line $xLocTextPx $yLineLocPx 
[expr $drawerWidthPx + $xLocTextPx] $yLineLocPx 
-fill "#a0a0a0" -width $widl
}
}
}
#Собственно скрипт
#Считываем размеры экрана
set ::scrwidth [winfo screenwidth .]
set ::scrheight [winfo screenheight .]
set ::typetlf 0
#Проверяем, что это телефон
if {$::scrwidth < $::scrheight} {
set ::typetlf 1
}
set ::padls 20
set ::padlx 15
set ::padly 15
if {$::typetlf} {
wm attributes . -fullscreen 1
#Логотип продуктв
scaleImage logo_product 2
set ::padls 50
set ::padlx 75
set ::padly 50
} else {
#Конфигурирование виджета под смартфон
set ::scrwidth 370
set ::scrheight 700
wm minsize . $::scrwidth $::scrheight
set geometr $::scrwidth
append geometr "x"
append geometr $::scrheight
append geometr "+0+0"
wm geometry . $geometr
}
#Грузим картинки
image create photo voda -file [file join $mydir "imageme" "voda_400x800.png"]
#Логотип продукта
image create photo logo_product -file [file join $mydir "imageme" "validcertkey_51x24.png"] 
#Создаем название продукта
set name_product "CryptoArmPKCS-A" 
label .labtitul -image logo_product -compound left -fg snow -text $name_product -font {Arial 10 bold} -anchor w  -width [winfo screenwidth .] -pady $::padls -padx 10 -bg #222222 
pack .labtitul -anchor nw -expand 0 -fill x -side top  -padx 1 -pady 0
#Создаем страницы с функционалом
set i 1
ttk::frame .fr$i -pad 0 -padding 0
#Кнопки основного меню
set but(0) "Стартовая страница" 
set but(1) "Подписать документ"
set but(2) "Работаем с ЭП (PKCS7)" 
set but(3) "Запрос на сертификат" 
set but(4) "Просмотр запроса/сертификата" 
set but(5) "Список криптомеханизмов"
set but(6) "Просмотр ASN1-структуры" 
set but(7) "Объекты токена" 
set but(8) "Работаем с PKCS12/PFX" 
set but(9) "Самоподписанный сертификат"
set but(10) "Об Утилите/Дистрибутивы" 
set but(11) "Создать Токены"
set but(12) "Конфигурировние токена"
if {$::typetlf} {
scaleImage voda 3 2
}
#Создаем страницу с функционалом
page_func ".fr$i" voda "Функционал" "but"
#Отображаем страницу с функционалом
pack .fr$i -side top -anchor center -expand 1 -fill both -side top  -padx 0 -pady 0

Lesi script siphinde silungise izikhala zenkinobho ngayinye yomsebenzi:

Izikhala zigcwaliswa ngamawijethi akudala nangokwengqikithi (uhlaka lwelebula, inkinobho, njll.). Enye yalezi zikhala ezigcwalisiwe ingabonakala kusithombe-skrini sokuqala kwesokudla. Njengoba esigabeni sokuqala sigxile ekusebenzeni nesiqukathi se-PKCS#12, ikhodi yasetshenziswa cishe ingashintshiwe ku-cryptoarmpkcs-A. Kulesi sigaba imisebenzi elandelayo iyenziwa:

sayina idokhumenti (Cades-BES, CAdes-T, CAdes-XLT1);
Sisebenza ngesiginesha ye-elekthronikhi (i-PKCS7), okuhlanganisa nokwengeza osayinayo;
Buka izitifiketi/izicelo zesitifiketi:
Sisebenza ne-PKCS12/PFX;
mayelana nokusetshenziswa/Ukusabalalisa:

Imisebenzi esele ihlobene kakhulu namathokheni e-PKCS#11. Ukuthuthwa kwabo kuhlehliselwe unyaka omusha. Kuhlelelwe ukuxhuma ithokheni yesofthiwe bese uxhuma kuyo ifu uphawu.

Ngokombono wokusebenza, cishe yonke into iyafana nensiza ye-cryptoarmpkcs. Kodwa kukhona umehluko. Isibonelo, ngemuva kokusayina idokhumenti, insiza ibuza ukuthi isiginesha izoqinisekiswa yini kuwebhusayithi Yezinsizakalo Zikahulumeni:

Uma uchofoza inkinobho ethi "Yebo", isiphequluli sizolayisha ikhasi lokuqinisekisa isiginesha yamadokhumenti nezitifiketi. Ake sithi ngokushesha leli khasi alakhelwenga isikrini se-smartphone. Lokhu kuzobonakala lapho kukhethwa isiginesha futhi, uma isiginesha ivaliwe, ifayela elinedokhumenti. Kodwa uma konke kuhamba kahle, khona-ke sizothola umphumela omuhle:

Kufanele kukhunjulwe ukuthi ukuhlola kokubili isiginesha nesitifiketi kuwebhusayithi Yezinsizakalo Zombuso kunengqondo kuphela uma isitifiketi samukelwe esikhungweni sezitifiketi esigunyaziwe (УЦ). Uma kungenjalo, isiginesha iyohlala ingavumelekile.

Ukuze ngishayele isiphequluli, bekufanele ngengeze imigqa embalwa kunqubo ye-openUrl:

proc openURL {url} {
global typesys
global macos
#  global windowsOS
#проверка, что утилита выполняется на смартфоне Android
if {$::typetlf} {
#Запуск браузера
borg activity android.intent.action.VIEW $url text/html
return
}
. . .
}

Isiphequluli ku-Android sibizwa kanje:

borg activity android.intent.action.VIEW <URL> text/html

Kukhona okukhethekile okuncane lapho wengeza osayinile omusha kudokhumenti esayiniwe ngaphambilini. Isitifiketi sosayini esisha (noma kunalokho, ngisho nesiqukathi se-PKCS#12 esinesitifiketi nokhiye oyimfihlo) kufanele sikhethwe kusengaphambili ekhasini elithi “Sayina idokhumenti” noma “Ukusebenza ne-PKCS12/PFX”, insiza ezokukhumbuza ngaso. :

Ngesikhathi sokusebenza kwesikhathi eside, iwashi lizoqhubeka nokuphawula:

Okusele nje ukusho ukuthi ungalanda kuphi ukusatshalaliswa futhi ngikuhalalisele onyakeni omusha ozayo futhi ufisele wonke umuntu okuhle kodwa ngo-2020!

Ngakho-ke, ukusatshalaliswa kweLinux, OS X, Windows ne-Android:

Source: www.habr.com

I-Cryptographic workstation esekelwe ezimisweni ezibalulekile zomphakathi zeplathifomu ye-Android

Engeza amazwana Отменить ответ