MikroTik in repeater modus - tam facile quam unus-Duo-Tres

Primoiter itineris occasus sine configuratione defaltam creando, exempli gratia, per consolatorium.

/system reset-configuration no-defaults=yes skip-backup=yes

Secundo, imperio configurationis automatico utimur, quod wireless interfaciem conformabit ut punctum accessum coniungere et virtualem interfaciem efficiat, pontem interfaciem efficiat et utrumque (praecipuum et virtualem) interfaces ad pontem pontis adiciat.

In parametris wireless interfacem, nomen Wi-Fi ac tesseram indicamus.

/interface wireless setup-repeater number=wlan1 ssid=demowifi passphrase=demopassword

tertium, interfaces necessarias ad pontem wireless adde et fac IP oratio in ponte interface secundum retis inscriptionis tuae.

/interface bridge port add bridge=bridge1 interface=all
/ip address add address=192.168.88.2/24 interface=bridge1 network=192.168.88.0

Nexus utilis

• https://wiki.mikrotik.com/wiki/Manual:Reset
• https://wiki.mikrotik.com/wiki/Manual:Interface/Wireless
• https://wiki.mikrotik.com/wiki/Manual:Interface/Bridge

Source: www.habr.com